[NetworkManager] unable to create AdHoc network?
Hi,
I'm trying to create an AdHoc network from my laptop so my phone can connect to it and use it as a source for an Internet connection. The laptop is a Lenovo T420:
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34)
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
I'm running kernel 3.4.5 on Arch testing and NetworkManager 0.9.4.0-6 with network-manager-applet 0.9.4.1-1 . This is what happens in dmesg when I try to create an AdHoc network without any encryption:
[ 1176.884345] wlan0: Trigger new scan to find an IBSS to join
[ 1182.127762] wlan0: Trigger new scan to find an IBSS to join
[ 1185.272116] wlan0: Creating new IBSS network, BSSID 8a:aa:21:f3:c0:ba
[ 1185.274065] iwlwifi 0000:03:00.0: Unable to find TIM Element in beacon
[ 1185.274984] iwlwifi 0000:03:00.0: Unable to find TIM Element in beacon
[ 1185.275965] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1186.288622] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1186.295956] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1186.361057] iwlwifi 0000:03:00.0: REPLY_REMOVE_STA failed
[ 1186.361079] iwlwifi 0000:03:00.0: failed to remove IBSS station 00:00:00:00:00:00
[ 1228.023620] wlan0: Trigger new scan to find an IBSS to join
[ 1231.148315] wlan0: Creating new IBSS network, BSSID 22:c6:7a:f5:d9:2d
[ 1231.149667] iwlwifi 0000:03:00.0: Unable to find TIM Element in beacon
[ 1231.150582] iwlwifi 0000:03:00.0: Unable to find TIM Element in beacon
[ 1232.206898] iwlwifi 0000:03:00.0: REPLY_REMOVE_STA failed
[ 1232.206905] iwlwifi 0000:03:00.0: failed to remove IBSS station 00:00:00:00:00:00
$
Has anyone had any luck with this?
Cheers,
Good afternoon.
Hi Tho Vo , my name is Johnnatan and I am part of the Small business Support community. I have seen your post and I understand that you would like to configure vlan´s in your network in order to separate your main network to the guest network, in order to create a different network, please follow these steps:
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=4&app=search&vw=1&articleid=2171
If you have any question, please let me know.
Thank you.
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered, rate helpful posts.
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer.
Similar Messages
-
Since I am having such problems syncing through my router, would it be possible to directly connect my MacPro and AppleTV via wireless by creating some sort of adhoc network?
If any can tell me exactly how to do this I'd greatly appreciate it.
(Yes, I have a 802.11n airport card in the MacPro).philsmy,
You may create a wireless network for the Apple TV to join by enabling Internet Sharing over Airport if the Mac Pro is connected to the Internet some other way such as via ethernet. Information on Internet Sharing can be found in knowledge base article http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh336.html
Regards,
Chris -
Hi,
I am using Mikrotik router RB750GL and connected one of the ethernet port to the new airport Time Capsule. However, i am unable neither to create a new network nor extending an existing network using MacBook Pro. I have only managed to detect the TimeCapsule but stated "An unexpected error occurred. Try again".
Information:
Airport Time Capsule 2TB (just opened from the box today)
Detected other wifi devices (1)- stated Airport Time Capsule e862d5
Troubleshooting steps:
1) Tried to connect via Macbook
2) Tried to connect via Ipad and Iphone
3) Tried resetting the Airport Time Capsule (10 seconds, power off) for several times. Similar error was noted.Your problem is obvious.. it is called yosemite.
This is bug infested network nightmare.
You can setup the TC manually if your Mac won't do it automatically.
See Airtport Utility can't find Airport Time Capsule on either of my 2009 Macs
The ipad version of the airport utility usually works ok.. I am not sure if that is what you mean by your second step in troubleshooting.
Try again in complete network isolation .. if it still fails it is possible the TC is faulty.. a fair number are faulty out of the box.. I personally had this happen.. it acted poorly from day one and was completely dead by day five. Not a great piece of hardware overall .. !!
The replacement behaved much better from scratch.. it was easy to see that the first one should have been returned immediately but I needed to see if it was just me.
Do full hardware resets between attempts at setup.. it is much better than messing with any other method.. It is in the link above. -
Unable to Create Guest Network with Time Capsule
Time Capsule version: 7.6.1, AirPort Utility: 6.0(600.92), Cabel Modem Ambit U10C018, iMac w/ Mac OS X (10.7.3)
I have the Time Capsule installed as the only router. The Network settings, Router Mode is: DHCP and NAT. I am unable to find any tab or button for "Advanced" that will allow me to set up a guest network. I am pretty sure that cable modem does not function as a router because when I changed the Time Capsule to Bridge I was unable to make any wireless connections.
Any help woudl be greatly appreciated, but I will be away from the computer for the next 3 hours.We will assume that your Time Capsule is not one of the 1st Generation models, which did not have Guest Network capability.
But, if your Time Capsule is a few years old, or you purchased it from another user....you may have a single band version of the product....which cannot offer the Guest Network option.
If your Time Capsule has the capability....here is how to set up the Guest Network
Open AirPort Utility and click on the Time Capsule icon that appears
Click Edit in the next window that appears
Click the Wireless tab at the top of the window
Enter a check mark next to Enable Guest Network
Edit the name of the network as you wish
Select Wireless Security...either WPA2 Personal or WPA/WPA2 Personal would be good
Enter a password for the Guest Network and verify
Click Update at the lower right -
NetworkManager unable to join new networks
Hey Guys,
I am not sure exactly when this happened, because I only noticed it when I tried to join a new wireless network, which I don' do too often, but NetworkManager doesn't seem to allow me to join new networks anymore.
When I click on a new network in the applet in Gnome 3.6 it just does nothing. No error, no ask for authentication. If it sees a network that it has connected to before, like my home network, it connects. If there are two such networks in range, it will allow me to change between them, but again when I click on a network I have never connected to, it just does nothing.
When I try to turn of wireless, via the button in the applet, the button changes to off, but the wireless stays up.
If I go into networking in the Gnome settings, it does not allow me to select another network at all, it just ignores my mouse clicks...
I am not sure what is going on, it is very strange. All my packages are fully upgraded.
Anyone else having this issue, or any ideas what might be causing it?
Thanks,
DavidScimmia wrote:Have you updated to systemd yet?
Yes I have. Quite some time ago actually. In fact, I know for sure that it was working about a week ago, I went to a new coffee shop an used their wireless, and I was definitely using systemd then.
David
Last edited by zdevex (2012-11-04 19:12:09) -
Can 2 ipads create adhoc network?
I would like to connect 2 ipads when there is no access point available. Can i do it?
How can i connect between ipad2 and another wifi device where there is no access point?For an ad hoc, somebody has to act the role of the host. I don't think the pad does that. The iPhone does, thus the hotspot feature. I beleive you can use the phone as a 'router' between the pad and a AirPrint print printer, for example. I think, but have not tried, to use the phone as a 'router' between a pad and apple tv.
I am trying think what application there would be for tying 2 pads together via wifi, and I am coming up blank.
what do you have in mind! -
Create an AdHoc network on boot
Seems like a relatively trivial thing to do, but Im having issues getting this up with either systemctl service or netcfg.
netcfg fails because it's trying to connect to a network, but in actuality, it just created the AdHoc network.
DEBUG: wpa_cli -i wlan0 -p /run/wpa_supplicant terminate
> WPA Authentication/Association Failed
Here is the netcfg config
CONNECTION='wireless'
DESCRIPTION='AdHoc IPv4LL network'
INTERFACE='wlan0'
ESSID='my_ssid'
IP='no'
ADHOC=1
WPA_DRIVER=wext
IPCFG=('route add -net 169.254.0.0 netmask 255.255.0.0 dev wlan0 metric 99' 'route add default dev wlan0 metric 99')
POST_UP='avahi-autoipd -D wlan0'
When trying to use a service file, it fails trying to bring up the interface. I read in the wiki that it's not recommended to bring up an interface in systemd.
Process: 95 ExecStart=/usr/sbin/ip link set wlan0 up (code=exited, status=1/FAILURE)
Ideas on how to get create a AdHoc network with netcfg? What am I doing wrong?Thx funrush, so in other words, I'm fracked...6 pages of the same problem but no resolution...oh well. It must be a hardware related issue however, as my imac on the same level of Snow works fine (well, it has other issues) and on that box I can create adhoc networks till the cows come home...
-
trying to create a network so i can use apple tv on a private network for business meetings. any help?
Thx funrush, so in other words, I'm fracked...6 pages of the same problem but no resolution...oh well. It must be a hardware related issue however, as my imac on the same level of Snow works fine (well, it has other issues) and on that box I can create adhoc networks till the cows come home...
-
Hi All,
I am facing issues in creating adhoc network in Windows 8.1. After searching in internet, I found that adhoc works with
netsh commands.
1. I have tried neths commands and able to get it work on windows 8.1,
but I want to do it through the WLAN APIs ie. WlanConnect ,
2. I am able to initiate the adhoc network(on Windows 8.1) by using WlanConnect API and other device are also able to connect to the Windows8.1 initiated adhoc network but the DHCP is not working.
-> clients are not able to get the IP address.
Is it possible to create the adhoc network and get it work with WLAN APIs (WlanConnect) instead of netsh commands...?
Thanks
akhilHi,
Did you mean to write a program to implement that creating adhoc via UI? This should be development issue.
But this is Windows 8.1 client forum and there is no professional on develop.
To help you better, I suggest you submit a new case on MSDN forum to help to check your code as they will be more professional on your issue:
This is the MSDN forum link.
http://social.msdn.microsoft.com/Forums/
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Kate Li
TechNet Community Support -
Adhoc network created in windows 8.1 gets listed as an infrastructure network
Hi All,
I have created a adhoc network on a windows 8.1 (home ) tab following the below steps ,
netsh wlan set hostednetwork mode=allow
netsh wlan set hostednetwork ssid=tests key=123456789
netsh wlan start hostednetwork
hosted network started but to my surprise it got listed in all the other windows 8.1 tabs (which was not supposed to be listed),
I ran netsh wlan show networks command only to see that the new adhoc network <tests> is being detected by all other tabs as Infrastructure network
Did I miss anything while creating the network ? cuz.. I was expecting it to be listed as "adhoc" network ?
Other part of the deal is when I try to connect another 8.1 tab (home edition) by following the below steps
Click Open Network and Sharing Center > Manage Wireless Networks >
Add.
Click "Manually create a network profile". (This may look silly but we really are going to create an infrastructure network now.)
Enter the network name (SSID), security type, encryption type (if any) and the key that you noted in step 1.
Uncheck both checkboxes ("Start this connection automatically" and "Connect even if the network is not broadcasting".) [Note that you cannot have the connection start automatically. If you try to have it checked, step 10 will fail. A
different way to start it automatically during system boot is described below.]
Click Next > Close. Your connection must appear in the list with the icon suggesting infrastructure (two big screens connected to a tube). Don't worry about it.
Click Start, type in "cmd" in the search box, press Enter.
In the Command Prompt, type in "netsh wlan set profileparameter name=NetworkName
ConnectionType=IBSS", exactly as shown, without quotes, except you must substitute
NetworkName with the SSID (network name) of your ad-hoc network
connection fails (if I change the connection type back to ESS , it gets successfully connected
Why is this ? I am struggling with this from yesterday..Hi,
According to your description, it seems that your all Windows 8.1 computers connect to network via normal wireless network.
Did you have wireless router for them?
Please delete this adhoc, then check if these computer could connect to network.
If no, follow below guide to create and connect to adhoc :
Create adhoc in Windows 8.1
http://tipsandtricksforum.com/thread-210.html
connect to adhoc with Windows 8.1
http://social.technet.microsoft.com/Forums/windows/en-US/56ff83ff-1f15-4fc1-aa37-6651340d46fa/windows-81-connecting-to-ad-hoc-networks
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support -
User Unable to Create Folders on Mapped Network Drive
I have a user who is unable to create folders in a directory where she should have all the necessary permissions to do so. She is a member of an AD group, and the effective permissions for that group include everything except:
Full control
Change permissions
Take ownership
The permissions are inherited from two levels up the tree. So I went to the level from which the permissions are inherited and selected the "Replace all child object permissions with inheritable permissions from this object" option in order
to force the permissions to be reapplied to the child objects. That fixed the issue for about half a day. The issue came back and as far as I can tell nothing was changed--she still appears to have sufficient permissions to create folders, and
yet she cannot. In fact, I established a remote connection to her machine and tried it myself (under her account) and was not able to create a folder at any level in the tree.
I have confirmed that one other user who is in the same AD group can create folders at any level of the directory tree. I have also confirmed that no explicit permissions are set on any of the folders in the tree. So the two users have the same
effective permissions, yet it works for one and not the other.
Any help would be greatly appreciated!
--TomMy apologies for letting this issue set for so long. I got waylaid by a series of other more pressing issues and had to push this one to the back burner for a while, but I was able to come back to it and get it resolved today. I wanted to report
back for the benefit of others who may be reading this thread in the future.
I think there were two separate issues:
Conflicting permissions. The user was a member of two groups--one that grants the permissions needed and one that grants more restricted access. Her user account was also listed on the folder with more restrictive permissions than the groups.
She needs full access, so I removed her user ID and the more restrictive of the two groups.
It appears that the changes were not getting written to the subfolders. One of my co-workers suggested that I add her user ID with full control, make sure that change was made on all the subfolders, and then remove her user ID again and make
sure the removal was made on all the subfolders, just to verify that the changes were getting written to the subfolders. That worked.
I'm not sure why the second step was necessary, since the first step should have been sufficient to force the permissions to be re-written on the subfolders, but I could not get it working without doing both of these steps.
Thanks for the help on this issue, and again, my apologies for taking so long to get back to the group on this.
--Tom -
Unable to Load Database/Unable to create database.
RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild. -
Unable to create cluster, hangs on forming cluster
Hi all,
I am trying to create a 2 node cluster on two x64 Windows Server 2008 Enterprise edition servers. I am running the setup from the failover cluster MMC and it seems to run ok right up to the point where the snap-in says creating cluster. Then it seems to hang on "forming cluster" and a message pops up saying "The operation is taking longer than expected". A counter comes up and when it hits 2 minutes the wizard cancels and another message comes up "Unable to sucessfully cleanup".
The validation runs successfully before I start trying to create the cluster. The hardware involved is a HP EVA 6000, two Dell 2950's
I have included the report generated by the create cluster wizard below and the error from the event log on one of the machines (the error is the same on both machines).
Is there anything I can do to give me a better indication of what is happening, so I can resolve this issue or does anyone have any suggestions for me?
Thanks in advance.
Anthony
Create Cluster Log
==================
Beginning to configure the cluster <cluster>.
Initializing Cluster <cluster>.
Validating cluster state on node <Node1>
Searching the domain for computer object 'cluster'.
Creating a new computer object for 'cluster' in the domain.
Configuring computer object 'cluster' as cluster name object.
Validating installation of the Network FT Driver on node <Node1>
Validating installation of the Cluster Disk Driver on node <Node1>
Configuring Cluster Service on node <Node1>
Validating installation of the Network FT Driver on node <Node2>
Validating installation of the Cluster Disk Driver on node <Node2>
Configuring Cluster Service on node <Node2>
Waiting for notification that Cluster service on node <Node2>
Forming cluster '<cluster>'.
Unable to successfully cleanup.
To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster.
Event Log
=========
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 29/08/2008 19:43:14
Event ID: 1570
Task Category: None
Level: Critical
Keywords:
User: SYSTEM
Computer: <NODE 2>
Description:
Node 'NODE2' failed to establish a communication session while joining the cluster. This was due to an authentication failure. Please verify that the nodes are running compatible versions of the cluster service software.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{baf908ea-3421-4ca9-9b84-6689b8c6f85f}" />
<EventID>1570</EventID>
<Version>0</Version>
<Level>1</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2008-08-29T18:43:14.294Z" />
<EventRecordID>4481</EventRecordID>
<Correlation />
<Execution ProcessID="2412" ThreadID="3416" />
<Channel>System</Channel>
<Computer>NODE2</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="NodeName">node2</Data>
</EventData>
</Event>
====
I have also since tried creating the cluster with the firewall and no success.
I have tried creating the node from the other cluster and this did not work either
I tried creating a cluster with just a single node and this did create a cluster. I could not join the other node and the network name resource did not come online either. The below is from the event logs.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 01/09/2008 12:42:44
Event ID: 1207
Task Category: Network Name Resource
Level: Error
Keywords:
User: SYSTEM
Computer: Node1.Domain
Description:
Cluster network name resource 'Cluster Name' cannot be brought online. The computer object associated with the resource could not be updated in domain 'Domain' for the following reason:
Unable to obtain the Primary Cluster Name Identity token.
The text for the associated error code is: An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
The cluster identity 'CLUSTER$' may lack permissions required to update the object. Please work with your domain administrator to ensure that the cluster identity can update computer objects in the domain.I am having the exact same issue... but these are on freshly created virtual machines... no group policy or anything...
I am 100% unable to create a Virtual Windows server 2012 failover cluster using two virtual fiber channel adapters to connect to the shared storage.
I've tried using GUI and powershell, I've tried adding all available storage, or not adding it, I've tried renaming the server and changing all the IP addresses....
To reproduce:
1. Create two identical Server 2012 virtual machines
(My Config: 4 CPU's, 4gb-8gb dynamic memory, 40gb HDD, two network cards (one for private, one for mgmt), two fiber cards to connect one to each vsan.)
2. Update both VM's to current windows updates
3. Add Failover Clustering role, Reboot, and try to create cluster.
Cluster passed all validation tests perfectly, but then it gets to "forming cluster" and times out =/
Any assistance would be greatly appreciate. -
Unable to create IDOCs after client copy
I'm unable to create IDOCs after a client copy. I receive a SAPSQL_ARRAY_INSERT_DUPREC or insert of duplicate rows ABAP dump.
Does anyone know what how to fix this. Thank you in advance.
Runtime Error SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
Date and Time 22.10.2007 16:50:51
ShrtText
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEDI1" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"F09_IDOC_INSERT_WITH_NUMBER" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLEDI1" or "LEDI1F09"
"F09_IDOC_INSERT_WITH_NUMBER"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"F09_IDOC_INSERT_WITH_NUMBER"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "auaplxr3q"
Network address.......... "128.197.135.5"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "000B439ED600"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "auaplxr3q"
Database type............ "ORACLE"
Database name............ "Q63"
Database owner........... "SAPR3"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Mar 22 2007 20:48:46"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "175"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 4189928
Heap..................... 0
Page..................... 0
MM Used.................. 1469352
MM Free.................. 2718056
SAP Release.............. "640"
User and Transaction
Information on where terminated
The termination occurred in the ABAP program "SAPLEDI1" in
"F09_IDOC_INSERT_WITH_NUMBER".
The main program was "SAPMSSY1 ".
The termination occurred in line 108 of the source code of the (Include)
program "LEDI1F09"
of the source code of program "LEDI1F09" (when calling the editor 1080).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "F09_IDOC_INSERT_WITH_NUMBER" "(FORM)" but was not handled locally,
not declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLEDI1 ". Its source code starts in line 5
of the (Include) program "LEDI1F09 ".
Source Code Extract
Line
SourceCde
78
perform call_badi tables list_container_insert
79
using control
80
ident.
81
Aufruf des Badi's für das einstreuen neuer Segmente
82
perform call_insert_badi tables list_container_insert
83
using control
84
ident
85
changing maxsegnum.
86
87
free list_container_insert
88
FREE_RETURN = 1.
89
ELSE. " no other IDoc is open in create-mode
90
LOOP AT LIST_CONTAINER_CREATE WHERE MANDT EQ SY-MANDT
91
AND DOCNUM EQ IDENT.
92
LIST_CONTAINER_CREATE-DOCNUM = DOCNUM.
93
MODIFY LIST_CONTAINER_CREATE.
94
ADD 1 TO MAXSEGNUM.
95
ENDLOOP.
96
if control-mestyp eq c_mestyp.
97
CALL FUNCTION 'FUNCTION_EXISTS'
98
EXPORTING
99
funcname = c_func
100
EXCEPTIONS
101
FUNCTION_NOT_EXIST = 1.
102
IF syst-subrc IS INITIAL. "Anwendungssystem
103
perform call_transform
104
tables list_container_create
105
using control.
106
ENDIF.
107
endif.
>>>>>
INSERT EDID4 FROM TABLE LIST_CONTAINER_CREATE.
109
Aufruf des Badi's für das Anwendungsmapping einzelner Felder
110
perform call_badi tables list_container_create
111
using control
112
ident.
113
perform call_insert_badi tables list_container_create
114
using control
115
ident
116
changing maxsegnum.
117
118
free list_container_create
119
FREE_RETURN = 0.
120
ENDIF.
121
122
insert status records
123
124
SYN_ERROR_IN = ' '.
125
CNTR_STATUS = 0.
126
REFRESH LIST_STATUS.
127
CLEAR LIST_STATUS.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
13 FORM SAPLEDI1 LEDI1F09 108
F09_IDOC_INSERT_WITH_NUMBER
12 FUNCTION SAPLEDI1 LEDI1U19 33
EDI_DOCUMENT_CLOSE_CREATE_TAB
11 FUNCTION SAPLEDIR LEDIRU01 273
IDOC_INBOUND_WRITE_TO_DB
10 FORM SAPLEDIN LEDINF01 457
ONE_IDOC_STORE
9 FUNCTION SAPLEDIN LEDINU05 234
IDOC_INBOUND_ASYNCHRONOUS
8 FORM SAPLEDIN LEDINV05 19
IDOC_INBOUND_ASYNCHRONOUS
7 FORM SAPMSSY1 SAPMSSY1 254
XAB_RUN_DRIVER
6 FUNCTION SAPLSXAB LSXABU01 9
RFC_RUN_XAB_DRIVER
5 FUNCTION SAPLERFC LERFCU01 59
ARFC_EXECUTE
4 FUNCTION SAPLERFC LERFCU02 229
ARFC_DEST_SHIP
3 FORM SAPLERFC LERFCV02 28
ARFC_DEST_SHIP
2 FORM SAPMSSY1 SAPMSSY1 69
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 13 Ty. FORM
Name F09_IDOC_INSERT_WITH_NUMBER
CONTROL-MESTYP
USERCLONE
554544444222222222222222222222
53523CFE5000000000000000000000
C_MESTYP
FIDCCH
444444222222222222222222222222
694338000000000000000000000000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
LIST_STATUS-STAPA2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
C_FUNC
IDOC_TRANSFORM
444455544544542222222222222222
94F3F421E36F2D0000000000000000
SYST-REPID
SAPLEDI1
5454444322222222222222222222222222222222
310C549100000000000000000000000000000000
SY-UNAME
Q63CLNT140
533444533322
1633CE414000
%_DUMMY$$
2222
0000
SY-MSGV1
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SYST-SUBRC
0
0000
0000
ALE_IDOC_TO_APL_OK
62
33
62
LIST_CONTAINER_CREATE[]
Table IT_20[9x1068]
FUNCTION-POOL=EDI1DATA=LIST_CONTAINER_CREATE[]
Table reference: 14
TABH+ 0(20) = 070000008036F5B8000000000000000000000000
TABH+ 20(20) = 0000000E00000014000000090000042CFFFFFFFF
TABH+ 40(16) = 0400002300000CA0000824C401000000
store = 0x070000008036F5B8
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 14 (0x0000000E)
label = 20 (0x00000014)
fill = 9 (0x00000009)
leng = 1068 (0x0000042C)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000048
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x070000008036F610
pghook = 0x07000000802D86D0
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 23 (0x00000017)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LIST_CONTAINER_CREATE
1400000000000511747000000009E1BPADRML 00000002#èXD63 070TST_QA140_1
3333333333333333333333333333434544544222222222222222222222333333330E54332222222233355555433353
14000000000005117470000000095120142DC0000000000000000000000000000238846300000000070434F11140F1
CONTROL
1400000000000511747640 64 2SAPQ63 LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
G_MAXSYNERR
1
0000
0001
<%_TABLE_EDID4>
ALE_DISPATCH_ERROR
27
33
27
ALE_IDOC_READY_FOR_APL
64
33
64
%_SPACE
2
0
IDENT
0000000000000001
3333333333333333
0000000000000001
ALE_IDOC_TO_APL_ERROR
63
33
63
No. 12 Ty. FUNCTION
Name EDI_DOCUMENT_CLOSE_CREATE_TAB
IDENTIFIER
0000000000000001
3333333333333333
0000000000000001
NO_DEQUEUE
X
5
8
SYN_ACTIVE
Y
5
9
IDOC_CONTROL
1400000000000511747640 64 2SAPQ63 LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
SYNTAX_RETURN
0
0000
0000
INT_EDIDD[]
Table IT_10[9x1062]
FUNCTION-POOL=EDINDATA=G_T_DATA_RECORDS[]
Table reference: 9
TABH+ 0(20) = 0700000080284B80070000008028530800000000
TABH+ 20(20) = 000000090000000A0000000900000426FFFFFFFF
TABH+ 40(16) = 0400000900000AA8000824C401000000
store = 0x0700000080284B80
ext1 = 0x0700000080285308
shmId = 0 (0x00000000)
id = 9 (0x00000009)
label = 10 (0x0000000A)
fill = 9 (0x00000009)
leng = 1062 (0x00000426)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000039
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000080320D90
pghook = 0x07000000802E1508
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 17 (0x00000011)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x07000000802852A8
>>>>> 2nd level extension part <<<<<
tabhBack = 0x0700000080284B30
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
NO_IGNORE
2
0
EDI_IDOC_SYNTAX_ERROR_IN
60
33
60
DOCNUM
0000000000511747
3333333333333333
0000000000511747
EXCLUSIVE
E
4
5
SYNCHRONOUS
S
5
3
APL_TESTIDOC_CHECK_OK
55
33
55
FREE_RETURN
0
0000
0000
INT_EDIDD
1400000000000000001000009E1BPADRML 00000000##XD63 070TST_QA140_17 X00
3333333333333333333333333434544544222222222222222222333333330054332222222233355555433353322533
14000000000000000010000095120142DC0000000000000000000000000000846300000000070434F11140F1700800
SUB_INT_ACK_POSITIVE
14
33
14
G_INSERT_OK
2
0
LIST_CONTAINER_INSERT_TMP[]
Table[initial]
LIST_CONTAINER_INSERT_TMP
0000000000000000000000000 00000000##
2223333333333333333333333333222222222222222222222222222222333333330022222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 11 Ty. FUNCTION
Name IDOC_INBOUND_WRITE_TO_DB
PI_DO_HANDLE_ERROR
X
5
8
PI_NO_DEQUEUE
X
5
8
PI_RETURN_DATA_FLAG
X
5
8
PI_RFC_MULTI_CP
0000
3333
0000
PI_STATUS_MESSAGE
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PE_IDOC_NUMBER
0000000000000001
3333333333333333
0000000000000001
PE_INBOUND_PROCESS_DATA
140BAPI 6
3334454222222222222222222222222222222222222222222222222223222222222222222222222222222222222222
1402109000000000000000000000000000000000000000000000000006000000000000000000000000000000000000
PE_STATE_OF_PROCESSING
0
0000
0000
T_DATA_RECORDS[]
Table IT_10[9x1062]
T_LINKED_OBJECTS[]
Table IT_11[0x100]
FUNCTION-POOL=EDINFORM=ONE_IDOC_STOREDATA=LT_LINKED_OBJECTS[]
Table reference: 10
TABH+ 0(20) = 000000000000000007000000802853F000000000
TABH+ 20(20) = 0000000A0000000B0000000000000064FFFFFFFF
TABH+ 40(16) = 0400000900002BB00010249401000000
store = 0x0000000000000000
ext1 = 0x07000000802853F0
shmId = 0 (0x00000000)
id = 10 (0x0000000A)
label = 11 (0x0000000B)
fill = 0 (0x00000000)
leng = 100 (0x00000064)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000190
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x0700000080285390
>>>>> 2nd level extension part <<<<<
tabhBack = 0x0700000080285340
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
PC_CONTROL_RECORD
1400000000000000000 30 2 LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
L_STATUS
64
33
64
L_ALE_SUCCESS_MESSAGE
B1 S005 No filters
4322222222222222222253332222222222222222222222222222222222222222222222222246266676772222222222
21000000000000000000300500000000000000000000000000000000000000000000000000EF069C45230000000000
ST_PREVIOUS_PARTNER_DATA-SYNCHK
X
5
8
C_TRUE
X
5
8
SYST-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
C_ELEMENT_UNPROCESSED_IDOCS
Unprocessed_IDocs
56776667766544667222222222222222
5E02F353354F94F33000000000000000
ST_PREVIOUS_STATE_OF_PROCE
0
0000
0000
ST_INBOUND_PROCESS_DATA-EDIVR2
6
3
6
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
L_SYN_ACTIVE
Y
5
9
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
L_SYNTAX_RETURN
0
0000
0000
%_DUMMY$$
2222
0000
SY-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
No. 10 Ty. FORM
Name ONE_IDOC_STORE
IDOC_NUMBER_IN
0000000000000000
3333333333333333
0000000000000000
STATE_OF_PROCESSING_IN
0
0000
0000
INBOUND_PROCESS_DATA_IN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS[]
Table[initial]
G_LAST_IDOC_NUMBER
0000000000000000
3333333333333333
0000000000000000
SYST-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
CURRENT_CONTROL_RECORD_IN-DOCNUM
0000000000000000
3333333333333333
0000000000000000
CONV_ERROR
2
0
C_TRUE
X
5
8
SY
0000000000000000000000000000000000000000000000000000000000000000000000000000000200000000000000
0002000000010009000000000000000000000000000100000001000000010000000000000000004C00000000000000
STATUS_MESSAGE_IN
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_IDOC_SELECT_AND_WRITE_TO_DB
5
3
5
SY-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
STATUS_MESSAGE_IN-STAMID
22222222222222222222
00000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
STATUS_MESSAGE_IN-STAMNO
000
333
000
RET_FLAG
X
5
8
G_RFC_CODEPAGE
0000
3333
0000
RSJOBINFO-JOBSUBRC
0
0000
0000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
SY-LANGU
E
4
5
G_T_DATA_RECORDS[]
Table IT_10[9x1062]
LT_LINKED_OBJECTS[]
Table IT_11[0x100]
CURRENT_CONTROL_RECORD_IN
1400000000000000000 30 2 LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
SWO_%OBJID
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 9 Ty. FUNCTION
Name IDOC_INBOUND_ASYNCHRONOUS
IDOC_CONTROL_REC_40[]
Table IT_3[1x524]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_CONTROL_REC_40[]
Table reference: 3
TABH+ 0(20) = 07000000802D876007000000802D449000000000
TABH+ 20(20) = 0000000300000003000000010000020C000000E0
TABH+ 40(16) = 0400000900001FE0000A249001000000
store = 0x07000000802D8760
ext1 = 0x07000000802D4490
shmId = 0 (0x00000000)
id = 3 (0x00000003)
label = 3 (0x00000003)
fill = 1 (0x00000001)
leng = 524 (0x0000020C)
loop = 224 (0x000000E0)
xtyp = TYPE#000136
occu = 10 (0x0000000A)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000802DB9D8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 10 (0x0000000A)
lineAlloc = 10 (0x0000000A)
store_id = 9 (0x00000009)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x07000000802D88A0
>>>>> 2nd level extension part <<<<<
tabhBack = 0x07000000802D8710
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
IDOC_DATA_REC_40[]
Table IT_4[9x1063]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_DATA_REC_40[]
Table reference: 4
TABH+ 0(20) = 07000000802D880807000000802D896000000000
TABH+ 20(20) = 00000004000000040000000900000427FFFFFFFF
TABH+ 40(16) = 04000009000020500008249001000000
store = 0x07000000802D8808
ext1 = 0x07000000802D8960
shmId = 0 (0x00000000)
id = 4 (0x00000004)
label = 4 (0x00000004)
fill = 9 (0x00000009)
leng = 1063 (0x00000427)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000138
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000802E1550
pghook = 0x07000000802D8860
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 12 (0x0000000C)
shmIsReadOnly = 0 (0xHi Rohan,
Welcome to SDN!
This error means that you're trying to duplicate a record on the DB... check the IDOC number ranges... it might help
Regards
Juan
Please reward with points if helpful -
Unable to create Invoice against a Project based Purchase Order
Hi,
We have a scenario, wherein there is Purchase Order created against a NETWORK ACTIVITY of a PROJECT. We have created a Invoice with ref to this PO. Now we want to cancel this Invoice by creating the Credit Memo against this PO. But, while trying to create the Credit Memo, we end with the following error message:
"Budget for WBS element XXXX/12:7777-XX-X1-Y1-Z1 was exceeded by XXXX EUR in document item 003 Ntwk actvty XXXXXXXXXXXX 00110.
Hence unable to create the Credit Memo. Desperately looking for your response to solved this.............
Rgds,Hi,
Check the cost as on today for ur project under project itself using CJ20n & then go to CJ30 and check the Budget for ur WBS
regds,
CB
Maybe you are looking for
-
fui atualizar o softwere do meu iphone 4s e ao longo da atualização foi tudo normal, quando terminou, o itunes mostrou uma mensagem dizendo que tinha ocorrido um erro, e que eu deveria restaurar o iphone, comecei a restaurar, só que agora aparece uma
-
HP Envy 700-329 not accepting Windows 8.1 Pro!
Hi There, I recently purchased a HP Envy 700-329 for our company. It came pre-installed with Windows 8.1 Homre Premium. I had to format it and put Windows 8.1 Pro on it so we could join it to our domain. However what keeps happening is every time I i
-
How I can add polishkeyboard in to Firefox OS?
My ZTE open c does not support the Polish language. This is not a problem for me. I have a problem with writing in Polish. Is there any way to change the keyboard layout in Firefox OS 1.3?
-
Skype Support won't give me my account back.
So someone used skype support to change the email and password to my account and won't help me recover it. What is this. Can someone help please? Attachments: baited.png 163 KB notdamon.PNG 129 KB
-
TS1424 Why is iTunes charging money to my account
I am trying to download a song to my iPhone 4 and it's saying I can't because iTunes is charging me more then what's on my card. Is it because I tried downloading the same song more then once? How do I stop them from taking that money off my card bec