Networktraffic between BW and GUI and BW and ERP

Hello,
a possible customer of us want to outsource his BWs and ERP-system.
Is it better because of the networktraffic to put the BW in the LAN of
the customer and the ERP-system is connected over the WAN or should the
BW- and the ERP-system be in the same LAN and the customer is connected
over the WAN?
I think in other words: Where is more networktraffic, between BW- and
ERP-system during the regular dataexchange or between BW-system and the
GUI of the enduser?
Kind regards
Burkhard

The excehange of data between the GUI and BW would be typically Tcodes you enter using the GUI and when you execute queries using BEx and WAD tamplate design.
The bulk of the data transgfer would be between ECC and BW and this would in almost all cases be more that the data transferred between the GUI and BW ..

Similar Messages

Integration between SRM and ERP in part of Business Partners

Hi all
Could we make integration between SRM and ERP in part of Business Partners if we use Standalone Scenario? Thanks

Hi
Any scenario, You have EBP system as well as you said you have ERP system too. so you can do BBPGETVD and pull the vendor records. Normally standalone system may not have ERP system. In standalone Your account payable system integrated with your EBP system.
If you want to create a vendors locally in SRM you can create local vendors via web BBPMAININT or BP in GUI.
regards
Muthu
Edited by: Muthuraman Govindasamy on Sep 10, 2008 9:14 AM

Basic question regarding Contract data exchange between CRM and ERP

Hi,
1) At a very general level, can somebody tell me via what technology are contract documents exchanged between CRM and ERP? IDocs, RFC modules or proxies?
2) Is it possible to sychronise changes in a contract, e.g. if the contract is changes in the ERP system, those changes are auotomatically updated in the CRM contract?
3) Can somebody point me to any documentation on this?
Kind Regards,
Tony.

contracts are exchanged between CRM ans ERP ssytem ny RFC and FM , you use object SALESCONTRACT for this,it is possible to synchronize changes between both the systems

Remove RFC calls between SRM and ERP

Hi,
Did any of you ever worked on removing RFC calls between SRM and ERP systems?
Does SAP maintains a lost of these built-in RFC calls?
What are the known constraints to replace them by webservice calls ?
Thanks
Yann

Hi Yann,
There is nothing on the SAP database for SRM and the backend using webservice.
There is for connections to SRM catalog.
I haven't heard anything about plans to change this.
Hope this helps,
Kind Regards,
Matthew

Link Table between CRM and ERP

Hi Experts,
Does anyone knows the link table between CRM and ERP for Contact Person (Buss Part) CRM and Contact Person ERP.
In my customer system, contacts are automatically duplicated in CRM.
When you make a change in ERP, this change is automatically done in CRM.
So I suppose that there is a table between the both systems to find the corresponding number...
Thank you for your help and hope my English is good enough to understand :o)
Best regards,
Luis.

Hi Micky,
Thanks for your answer.
Unfortunatelly, number are differents...
I move this question to CRM forum ;o)
Kr,
Luis.
This has been solved in this thread:
Link Table between CRM and ERP
Edited by: Luis Loredo Marino on Feb 24, 2010 1:24 PM

Communication between CRM and ERP for E-commerce scenario

Question more on lines of system architecture design.
We are planning to implement CRM E-commerce and wanted to find out more detail about the communication between CRM and ERP systems. Do they need to communicate in real time for this application, or is it mainly initial and delta loads? Is the amount of data exchanged huge ( necessitating both systems to be on the same network, or can they be on separate geographical locations )?
We also understand that E-commerce can also be done only using ERP. How does that differ from the CRM version?

Hey Sanket,
Q 1 . Do CRM and ECC need to communicate in real time for Ecommerce application, or is it mainly initial and delta loads
Ans. CRM and ECC communicate using RFC connections which further uses TCP/IP as the protocol.The communication can be both real time { delta loads} or offline {initial download}.
Q2 .Is the amount of data exchanged huge ( necessitating both systems to be on the same network, or can they be on separate geographical locations )?
Ans. The amount of data can be huge hence its preferable that both systems to be on the same network.
Q 3. We also understand that E-commerce can also be done only using ERP. How does that differ from the CRM version
Ans.Theres no difference functionally but technically the application connects to the ECC system using JCO to execute all the RFC enabled function modules.
Warm Regards,
Sumit

Data exchange between SCM and ERP

Hi Guys,
Can you please tell what all data is exchanged between ERP system and SCM system.
I am doing a project to find out the exchange of data between these systems, it would be great if u can help me out or throw a direction to find these details.
Thanks a lot guys
Regards,
Kumar
POINTS ASSURED

Hi Kumar,
Please find detailed document help link as below:
http://help.sap.com/saphelp_scm70/helpdata/en/64/08533b89050863e10000000a114084/frameset.htm
For master data following data flow occurs from ECC to APO:
u2022     Products
u2022     Locations
u2022     Classes and characteristics
u2022     Batches
u2022     Setup groups
u2022     Resources
u2022     Production Process Modes / Produtc Data structures
Transaction data flow
u2022     Sales documents
u2022     Stocks
u2022     Inspection lots
u2022     Purchase orders and requisitions
u2022     Planned orders
u2022     Maintenance orders
u2022     Project / network orders
Regards
Datta

Different pricing procedure between CRM and ERP

Hello,
we`re using a CRM system which is connected to a ERP system. As not all pricing conditions from ERP are needed in CRM (an in addition the ERP pricing procedure is very complex), we would like to use a different (with less conditions) pricing procedure ind CRM.
But now, when we transfer an order from CRM to ERP, the pricing procedure from ERP gets downloaded into the order in CRM and the prices are lost. Therefore I have 2 questions:
1. Is it not possible to have a different pricing procedure in CRM than in ERP?
2. Is it possible to stop transferring the pricing procedure from ERP back to CRM when transferring orders?
Thank you in acvance for your help
Jan

Hi, Jan.
1. Is it not possible to have a different pricing procedure in CRM than in ERP?
Yes. You can use different pricing procedure for you business documents.
We use this for quotation management with inergation CRM-ERP.
But, You must use same Condition Types and other objects.
Denis.

Bp master data match between crm and erp

hi gurus,
is there a match list indicating the customer master fields in erp and in crm.
which field can be synchronized to crm? which field is the target one?
can gurus help provide? thank you.

Hi Daniel,
I am not sure if there is a list for that. But, the mandatory fields in R/3 should be same as the mandatory fields in CRM for the data transfer to be successful. You can set that up in transaction OVT0.
Regards,
Shwetha

Deactivate integration between SUS and ERP-MM

Dear Expert,
I have one requirement from user that all supplier invoices created in SUS must be block/park status in ERP-MM. I notice that there is ABAP effort here in order to facilitate the requirement. Prior to do that the automation invoice verification in ERP-MM must be disconnected from SUS, I believe somebody has experience before. Appreciate if you can share how to deactivate that setting.
Best regards,
Mahnansa

HI, Mahnansa
you can check the NOTE:501524.mybe helpful
Bestregards
Alex

MDM integrity between SRM and R/3

Hi All,
How MDM integrity of the process validations being made between SRM and R/3 for the creation of different documents.
Please share me any documents regarding MDM intergirty between SRM and R/3. This is not related to Catalogs,
1. Creation of documents like GOA in SRM and distributed to R/3. How MDM will validate that data.
2 If same material available in different backend system. while creating Contract in SRM, MDM should check the R/3 materials in MDM
3. How to integrity works for Vendors.
Thanks
ravi

Hi,
Take a look in these threads:
[Re: material master replication|Re: material master replication]
[Master Data Synchronization between SRM and ERP|Master Data Synchronization between SRM and ERP]
[Re: Material replication|Re: Material replication]
Rgs,
Pedro Marques

Difference between PCUI and CRM GUI

Hi all,
We are currently on CRM 5.0 and we noticed that in the CRM GUI
you have much more possibilities(and freedom) as in the PCUI version.
Eg. In the PCUI we can relate a contactperson to only 1 company while in the
gui version this is unlimited.
Another example: If we relate a contactperson to a company in the PCUI,
the address of the company is shown together with the contact person.
If we do this in the GUI(even when explicitly choosing for the copying of the address) , there is no copying of this address.
Is this default and standard SAP?
I can understand that the PCUI offers less possibilities but I can not believe that it handles another business logic then in the GUI.
Thanks for all reactions,
Hans

Dear Frederic,
Thanks for your fast response.
I'm not at my office and i'm a total novice in CRM.
How can I see which application we use?
Us was told that there is only ONE possibility for transaction BP in the portal.
Since there are differences between the two gui's, there is now the intention to rework the gui backend(with bapi's) so that it would react the same as in the portal(PCUI).
I have 10 years of overall experience in R/3 and this seems to me the world upside down.
Another intention is to let all users work from the portal(which is not very performant)
Furthermore I've difficulty to believe that SAP would offer a product(PCUI) that handles another business logic then the backend logic which is the basis of everything.
About the business address of the contact person:
In the portal we see this address together with the contact person data.
In the GUI we don't see it on the general tab(which doesn't seem to me unlogic since you can relate the same contact person to different companies)
Thanks again,
Hans

Listen if the TCP connection between robot and LV GUI is lost

Hi
I'm doing a simple client/server TCP connection between a Labview GUI and a robot controller.
My robot controller acts as the TCP server that waits for a connection from the Labview GUI, it gets a string as a ready signal and then writes a string back to the LV GUI to tell that the controller is ready, then the LV GUI should be ready to send commands to the robot.
So now first of all there are two things I want to do;
1) I want the user to push a button to connect to the robot and then make a red/green light turn on if the connection is established, then the LV GUI also starts a small loop that waits fro whatever is coming from the robotcontroller, this is only for debugging right now
2) Secondly I want the LV GUI to listen if the connection somehow is lost, like if the robot goes out of range or some other programming error in the script for the robot controller that might make the TCP connection terminate. So if the connection is lost from the serverside, then I want the LV GUI to keep runing but just turn the light red.
I have tried some of the examples in Labview but I sure could need some help on this.
LV 8.5
LabVIEW 8.6 / 2009 / 2010
Vision Development Module 8.6 / 2009 / 2010
VBAI 3.6 / 2010
Attachments:
11.gif ‏10 KB
21.gif ‏12 KB

You really should change your architecture. I assume that your other controls also control the robot, so you will need more complex messaging.
I suggest you look at some of the examples and templates for queued message handler. Essentially, this will allow you to send message between two loops, which is probably what you want.
As for what your comm loop should actually look like, you should separate the opening part from the communicating and closing part. That way, you can send the Ready string immediately after connecting. The example code you used already handles the timeout error, which is the indication you want that the connection was lost.
Here's one (very bad) example of how this could be done:
You should note that this does not really do any error handling. If you use a queued message handler and actually turn the comm loop into a state machine (with states like Open,Comm and Close), it should be cleaner.
To learn more about LabVIEW, I suggest you try looking at some of these tutorials.
Message Edited by tst on 01-19-2008 07:53 PM
Try to take over the world!
Attachments:
Comm.png ‏7 KB

Interaction between BSP and SAP GUI

Hello all,
I am having trouble with interaction between BSP and dynpros:
I have a dynpro with a container where a BSP is shown.
I would like to be able to return a value from the BSP to the control program of the dynpro.
Any ideas of how to do it?
Thanks a lot!
Helpful answers will be regarded.

Hello both,
thank you for your replies, but I am still not able of performing this.
I have tried using GET/SET parameters but it is not working, I get no parameter (perhaps I am not using the sentences correctly or in the correct place).
I have also tried the code of demo program SAPHTML_EVENTS_DEMO and I think I cannot do it, I explain it a bit more:
I have a button on my BSP with some code programmed on event OnInputProcessing to be executed, and at the end I would like to return one value to the control program of the dynpro.
But if I set the html form of the BSP as action:SAPEVENT, the bsp code is not executed...
Am I doing something wrong?
Thanks!!

Difference between ok_code and sy-ucomm

Hi,
Can any one tell me the difference between ok_code and sy-ucomm

Hi,
Actually OK_CODE and SY-Ucomm are the same. But experts suggest use of OK code for following reason:
In each PAI event that a user triggers by choosing either a pushbutton on the screen or an element in a GUI status, the corresponding function code is placed into the system field SYST-UCOMM or SY-UCOMM and placed in the OK_CODE field (as long as the function code is not empty). Empty function codes are placed in neither the SY-UCOMM field nor the OK_CODE field.
In your ABAP programs, you should work with the OK_CODE field instead of SY-UCOMM. There are two reasons for this: Firstly, the ABAP program has full control over fields declared within it, and secondly, you should never change the value of an ABAP system field. However, you should also always initialize the OK_CODE field in an ABAP program for the following reason:
In the same way that the OK_CODE field in the ABAP program and the system field SY-UCOMM receive the contents of the corresponding screen fields in the PAI event, their contents are also assigned to the OK_CODE screen field and system field SYST-UCOMM in the PBO event. Therefore, you must clear the OK_CODE field in the ABAP program to ensure that the function code of a screen is not already filled in the PBO event with an unwanted value. This is particularly important when the next PAI event can be triggered with an empty function code (for example, using ENTER). Empty function codes do not affect SY-UCOMM or the OK_CODE field, and consequently, the old field contents are transported.

Networktraffic between BW and GUI and BW and ERP

Similar Messages

Maybe you are looking for