NetworkVar​iableDataS​ource.Bind​ings[Varia​bleName].G​etValue() leaks memory
Dear Sir,
We are using Measurement
Studio 8.5 for Visual Studio 2005. Our application reads 105 Netwrok
Variables in every seconds. It does the work done through
NetworkVariableDataSource.Bindings[VariableName].GetValue(). So far we
have tested and determined that the GetValue() methods leaks some
memory and every seconds the memory consumption by the application goes
up. How can we solve this problem? We are using c# lannguage.We need argent solution.
Best regards,
Mamunur Rashid,
TechnoVista Limited
Dear Eric B.,
Following are some code segements
Some
aspx code:
<td>
<asp:UpdatePanel ID="UpdatePanelDO_KV601A_KV601B" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<uc3:NIButton ID="DO_KV601A_KV601B" runat="server" VariableName="DO_KV601A-KV601B"
Caption="KV601A-B"></uc3:NIButton>
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="Timer1" EventName="Tick"></asp:AsyncPostBackTrigger>
</Triggers>
</asp:UpdatePanel>
</td>
<td>
<asp:UpdatePanel ID="UpdatePanelAO_FC601" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<uc2:NIText ID="AO_FC601" ToolTip="FC601" runat="server" VariableName="FC601"></uc2:NIText>
</ContentTemplate>
<%--<triggers>
<asp:AsyncPostBackTrigger ControlID="Timer1" EventName="Tick"></asp:AsyncPostBackTrigger>
</triggers>--%>
</asp:UpdatePanel>
</td>
<td>
<asp:UpdatePanel ID="UpdatePanel51" runat="server" UpdateMode="conditional">
<Triggers>
<asp:AsyncPostBackTrigger ControlID="Timer1" EventName="Tick" />
</Triggers>
<ContentTemplate>
<uc1:NIReadOnlyText ID="AI_FT601" VariableName="FT601" ToolTip="FT601" runat="server"
Enabled="false"></uc1:NIReadOnlyText>
slpm
</ContentTemplate>
</asp:UpdatePanel>
</td>
Some
code of Timer1_Tick of aspx.cs
protected void Timer1_Tick(object sender, EventArgs e)
refreshCustomControls(Page.Controls[0]);
protected void refreshCustomControls(Control control)
if (control is NINetworkVariableTextBox)
if (!txtActiveControlID.Text.Contains(control.ID))
// get the update panel that this user control lives in
// Control updatePnl = Page.FindControl(control.Parent.Parent.ID);
Control updatePnl = control.Parent.Parent;
NINetworkVariableTextBox tb = (NINetworkVariableTextBox)control;
string origValue = tb.Text;
// read the current data from the shared variable
tb.readData();
// tell this update panel to update
((UpdatePanel)updatePnl).Update(); //It is needed to remove yellow back color and update data and here no asychonous postback is used
else if (control is NINetworkVariableReadOnlyTextBox)
if (!txtActiveControlID.Text.Contains(control.ID))
FormattingValueOfReadOnlyText(control);
else if (control is NINetworkVariableButton)
if (!txtActiveControlID.Text.Contains(control.ID))
((NINetworkVariableButton)control).readData();
/* these controls are in asychonous update with timer so dont need to update panel update()*/
else if (control is NINetworkVariableRadioButton)
//if (control.ID != txtActiveControlID.Text)
if (!txtActiveControlID.Text.Contains(control.ID))
((NINetworkVariableRadioButton)control).readData();
else if (control.ID == "controlgraph")
return;
else
foreach (Control child in control.Controls)
refreshCustomControls(child);
Similar Messages
-
Use of Bind , Connect with IP Multicasting
i'm trying to get a clear picture of the semantics of using bind, connect with IP multicasting.
ipv4 & ipv6 both are relavent.
it is my understanding -- you must multicast join on each interface you want to receive on.
in my view of the world, ideal semantics would provide :
bind-ing a socket to a specific local IP address, port - that has joined multiple IP multicast addresses
on multiple interfaces would allow multicasts to still be received - but would limit them to
interfaces which matched the bound IP address, and further if more than 1 interface supported
the same IP address, would allow receipt for all the joined interfaces that match the bound
IP address.
this does not appear to be the case; it appears that binding to a local IP address causes
multicast receipt to terminate. binding to 1 of the joined multicast address limits receipt
to the bound multicast address. the semantics seem confusing.
regarding connect :,
imagine multiple sources of a specific IP multicast address; your socket is doing receiving only,
no transmiting. it seems that ideally connect would allow you to limit the receipt of IP multicast
to the source that you connect to; i imagine connecting to the foreign IP address,
not the IP multicast address being transmitted. if semantically i could connect to the IP multicast address
i would still be receiving from all the sources - so no filtering benefit.
my understanding is you can connect to a IP multicast address; but this seems redundant to bind with
the only advandage that you can use send instead of sendto. and further if multiple sources are
transmitting the same IP multicast address you dont get filtering
when i tried using multiple sources transmitting 2048 different IP multicast address, with a receiver
who had multicast joined the same 2048 IP multicast address -- as soon as connect to 1 of the
sources ( foreign IP address) of the IP multicasts i stop receving packets all together. i had hoped
to limit the receipt of the multicasts to just that single source.Generally, you would use bind variables by changing statements that are written like this
select * from emp where empno=6678 and ename='Jones'
so that they're written like
select * from emp where empno=? and ename=?
How you then bind these question marks to the particular values you want depends on the API you're using (ADO? OLE DB directly?, etc). If you have a support contract, there are plenty of examples for any API on metalink.oracle.com
Justin -
IMR7 : Creation of a new Screen Variant does not save Layout
Hello,
In IMR7, if I create a new screen Variant with a modified the default Layout field, the next time I log-in to SAP, system does not recognize my Layout selection.
Do you have a suggestion?
Thanks
FrançoisHello,
Thanks for your support but it did not resolved my problem.
When I save Layout I have three fields:
-Layout name
-User-specific checkbox
-Description
Even though User-specific is not checked, next time I relog to SAP and choose my Variant, the layout I have chosen in this variant is not keeped in memory. A layout named 4_SAP_IM is always displayed.
Do you have the same behavior?
Thanks
François -
Memory leak with variant/OCX
I'm trying to get images from an IP webcam thanks to an ActiveX and process them with IMAQ.
This ActiveX needs a variant to put chars from the image. It seems to work fine, (nearly 'in real-time') when I convert a string into a variant. Nevertheless, I have memory leak, if I put this sub-VI into a while loop.
So, rather than using a string conversion, I've tried to use a Uchar array conversion. It also seems to work but it is really slow and in this case I don't have any leak of memory !
I'm likely misunderstand the memory managment of Labview.
Thank you very much for your help.Sorry for the VIs I've sent.
Here are simplified VIs, with comments that illustrate the problem.
I hope this will bring you clearer informations.
Olivier M.
Attachments:
test_snap.vi 57 KB
InitAxis.vi 36 KB
SnapAxis.vi 38 KB -
Problem With httpd.conf and mod_rewrite rules Apache 2.2
I have some RewriteRules that are working on my Leopard Client Apache 2.2 machine - but when I try to implement them on Leopard Server Apache 2.2, they don't work. I don't get any errors, they just won't execute.
Could somebody with Leopard Server help me out using the below info?
Here are the rules I am trying to add: (below is the httpd.conf file)
======RULES========
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
# Remove ".php"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]
# Remove ".asp"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]
# Remove ".aspx"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]
# Remove ".htm" and ".html"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]
# Remove ".cfm"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]
# Remove ".bak"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]
# Remove ".inc"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]
# Remove ".*"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]
=====RULES============
=========HTTPD.CONF=============
#### Default httpd.conf for Mac OS X Server, Apache 2.2
#### This httpd.conf differs from the httpd.conf distributed
#### with Apache and the httpd.conf present on Mac OS X.
#### Feel free to edit this; the Server Admin app also edits this file but will
#### respect your changes unless noted below. See also ReadMe.txt.
## ServerRoot: The top of the directory tree under which the server's
## configuration, error, and log files are kept.
## NOTE! If you intend to place this on an NFS (or otherwise network)
## mounted filesystem then please read the LockFile documentation
## (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
## you will save yourself a lot of trouble.
## Do NOT add a slash at the end of the directory path.
ServerRoot "/usr"
## PidFile: The file in which the server should record its process
## identification number when it starts.
PidFile /var/run/httpd.pid
## ScoreBoardFile: File used to store internal server process information.
## Not all architectures require this. But if yours does (you'll know because
## this file will be created when you run Apache) then you must ensure that
## no two invocations of Apache share the same scoreboard file.
#ScoreBoardFile "/var/run/apache2runtimestatus"
## Server-pool size regulation. Rather than making you guess how many
## server processes you need, Apache dynamically adapts to the load it
## sees --- that is, it tries to maintain enough server processes to
## handle the current load, plus a few spare servers to handle transient
## load spikes (e.g., multiple simultaneous requests from a single
## Netscape browser).
## It does this by periodically checking how many servers are waiting
## for a request. If there are fewer than MinSpareServers, it creates
## a new spare. If there are more than MaxSpareServers, some of the
## spares die off. The default values are probably OK for most sites.
MinSpareServers 1
MaxSpareServers 1
## Number of servers to start initially --- should be a reasonable ballpark
## figure.
StartServers 1
## MaxRequestsPerChild: the number of requests each child process is
## allowed to process before the child dies. The child will exit so
## as to avoid problems after prolonged use when Apache (and maybe the
## libraries it uses) leak memory or other resources. On most systems, this
## isn't really needed, but a few (such as Solaris) do have notable leaks
## in the libraries. For these platforms, set to something like 10000
## or so; a setting of 0 means unlimited.
## NOTE: This value does not include keepalive requests after the initial
## request per connection. For example, if a child process handles
## an initial request and 10 subsequent "keptalive" requests, it
## would only count as 1 request towards this limit.
MaxRequestsPerChild 100000
## Dynamic Shared Object (DSO) Support
## To be able to use the functionality of a module which was built as a DSO you
## have to place corresponding `LoadModule' lines at this location so the
## directives contained in it are actually available before they are used.
## Please read the file http://httpd.apache.org/docs/dso.html for more
## details about the DSO mechanism and run `httpd -l' for the list of already
## built-in (statically linked and thus always available) modules in your httpd
## binary.
## Note: The order in which modules are loaded is important. Don't change
## the order below without expert advice.
## Example:
## LoadModule foo_module libexec/mod_foo.so
#### For Mac OS X Server: Note that the Server Admin application
#### and the apxs utility enable and disable modules
#### by removing and adding a comment character.
LoadModule authnfilemodule libexec/apache2/modauthnfile.so
#LoadModule authndbmmodule libexec/apache2/modauthndbm.so
#LoadModule authnanonmodule libexec/apache2/modauthnanon.so
#LoadModule authndbdmodule libexec/apache2/modauthndbd.so
#LoadModule authndefaultmodule libexec/apache2/modauthndefault.so
LoadModule authzhostmodule libexec/apache2/modauthzhost.so
#LoadModule authzgroupfilemodule libexec/apache2/modauthzgroupfile.so
#LoadModule authzusermodule libexec/apache2/modauthzuser.so
#LoadModule authzdbmmodule libexec/apache2/modauthzdbm.so
#LoadModule authzownermodule libexec/apache2/modauthzowner.so
#LoadModule authzdefaultmodule libexec/apache2/modauthzdefault.so
#LoadModule authbasicmodule libexec/apache2/modauthbasic.so
#LoadModule authdigest_applemodule libexec/apache2/modauth_digestapple.so
LoadModule cache_module libexec/apache2/mod_cache.so
LoadModule memcachemodule libexec/apache2/modmemcache.so
LoadModule diskcachemodule libexec/apache2/moddiskcache.so
#LoadModule dbd_module libexec/apache2/mod_dbd.so
LoadModule dumpio_module libexec/apache2/mod_dumpio.so
LoadModule extfiltermodule libexec/apache2/modextfilter.so
LoadModule include_module libexec/apache2/mod_include.so
LoadModule filter_module libexec/apache2/mod_filter.so
LoadModule deflate_module libexec/apache2/mod_deflate.so
LoadModule logconfigmodule libexec/apache2/modlogconfig.so
LoadModule logio_module libexec/apache2/mod_logio.so
LoadModule env_module libexec/apache2/mod_env.so
LoadModule expires_module libexec/apache2/mod_expires.so
LoadModule headers_module libexec/apache2/mod_headers.so
LoadModule ident_module libexec/apache2/mod_ident.so
LoadModule setenvif_module libexec/apache2/mod_setenvif.so
LoadModule proxy_module libexec/apache2/mod_proxy.so
#LoadModule proxyconnectmodule libexec/apache2/modproxyconnect.so
#LoadModule proxyftpmodule libexec/apache2/modproxyftp.so
LoadModule proxyhttpmodule libexec/apache2/modproxyhttp.so
#LoadModule proxyajpmodule libexec/apache2/modproxyajp.so
LoadModule proxybalancermodule libexec/apache2/modproxybalancer.so
LoadModule ssl_module libexec/apache2/mod_ssl.so
LoadModule mime_module libexec/apache2/mod_mime.so
#LoadModule mimemagicmodule libexec/apache2/modmimemagic.so
#LoadModule dav_module libexec/apache2/mod_dav.so
LoadModule status_module libexec/apache2/mod_status.so
LoadModule autoindex_module libexec/apache2/mod_autoindex.so
LoadModule asis_module libexec/apache2/mod_asis.so
LoadModule info_module libexec/apache2/mod_info.so
LoadModule cgi_module libexec/apache2/mod_cgi.so
#LoadModule davfsmodule libexec/apache2/moddavfs.so
LoadModule vhostaliasmodule libexec/apache2/modvhostalias.so
LoadModule negotiation_module libexec/apache2/mod_negotiation.so
LoadModule dir_module libexec/apache2/mod_dir.so
LoadModule imagemap_module libexec/apache2/mod_imagemap.so
LoadModule actions_module libexec/apache2/mod_actions.so
LoadModule speling_module libexec/apache2/mod_speling.so
LoadModule userdir_module libexec/apache2/mod_userdir.so
LoadModule alias_module libexec/apache2/mod_alias.so
LoadModule rewrite_module libexec/apache2/mod_rewrite.so
#LoadModule php5_module libexec/apache2/libphp5.so
#LoadModule encoding_module libexec/apache2/mod_encoding.so
#LoadModule jk_module libexec/apache2/mod_jk.so
#LoadModule applespotlightmodule libexec/apache2/modspotlightapple.so
#LoadModule bonjour_module libexec/apache2/mod_bonjour.so
LoadModule appleauthmodule libexec/apache2/modauthapple.so
LoadModule spnegoauthmodule libexec/apache2/modspnegoapple.so
LoadModule appledigestmodule libexec/apache2/moddigestapple.so
LoadModule hfsapplemodule libexec/apache2/modhfsapple.so
#LoadModule fastcgi_module libexec/apache2/mod_fastcgi.so
#LoadModule scgipubsubmodule libexec/apache2/modscgipubsub.so
#LoadModule davsvnmodule libexec/apache2/moddavsvn.so
#LoadModule authzsvnmodule libexec/apache2/modauthzsvn.so
## If you wish httpd to run as a different user or group, you must run
## httpd as root initially and it will switch.
## User/Group: The name (or #number) of the user/group to run httpd as.
## It is usually good practice to create a dedicated user and group for
## running httpd, as with most system services.
User www
Group www
## Each directory to which Apache has access, can be configured with respect
## to which services and features are allowed and/or disabled in that
## directory (and its subdirectories).
## First, we configure the "default" to be a very restrictive set of
## features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
## UserDir: The name of the directory which is appended onto a user's home
## directory if a ~user request is received.
#### For Mac OS X Server: Note that
#### personal websharing is not supported on Mac OS X Server.
<IfModule mod_userdir.c>
UserDir Sites
</IfModule>
## AccessFileName: The name of the file to look for in each directory
## for access control information.
AccessFileName .htaccess
## The following lines prevent .htaccess files from being viewed by
## Web clients.
#### For Mac OS X Server: Note the case-insensitive pattern, which protects
#### .htaccess fils on HFS volumes.
#### (Note: Denying .DS_S* may interfere with Finder WebDAV operation)
<Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
Order allow,deny
Deny from all
Satisfy All
</Files>
#### Block attempts to circumvent access controls by requesting forks.
<Files "rsrc">
Order allow,deny
Deny from all
Satisfy All
</Files>
<DirectoryMatch ".*\.\.namedfork">
Order allow,deny
Deny from all
Satisfy All
</DirectoryMatch>
## DefaultType is the default MIME type the server will use for a document
## if it cannot otherwise determine one, such as from filename extensions.
## If your server contains mostly text or HTML documents, "text/plain" is
## a good value. If most of your content is binary, such as applications
## or images, you may want to use "application/octet-stream" instead to
## keep browsers from trying to display binary files as though they are
## text.
DefaultType text/plain
<IfModule mod_mime.c>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig /dev/null
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddOutputFilter INCLUDES .shtml
## Although mod_mime may support several extensions following a single
## mime type (ex: "AddType video/quicktime qt mov"), the parser used
## by the Server Admin application expects only one extension per line.
AddHandler send-as-is asis
AddHandler cgi-script cgi
AddHandler fastcgi-script fcgi
AddHandler imap-file map
AddHandler server-parsed shtml
AddHandler type-map var
AddHandler spotlight-search spotlight
AddType application/andrew-inset ez
AddType application/atom+xml atom
AddType application/atomcat+xml atomcat
AddType application/atomsvc+xml atomsvc
AddType application/ccxml+xml ccxml
AddType application/davmount+xml davmount
AddType application/ecmascript ecma
AddType application/font-tdpfr pfr
AddType application/hyperstudio stk
AddType application/javascript js
AddType application/json json
AddType application/mac-binhex40 hqx
AddType application/mac-compactpro cpt
AddType application/marc mrc
AddType application/mathematica ma
AddType application/mathematica mb
AddType application/mathematica nb
AddType application/mathml+xml mathml
AddType application/mbox mbox
AddType application/mediaservercontrol+xml mscml
AddType application/mp4 mp4s
AddType application/msword doc
AddType application/msword dot
AddType application/mxf mxf
AddType application/octet-stream bin
AddType application/octet-stream bpk
AddType application/octet-stream class
AddType application/octet-stream dist
AddType application/octet-stream distz
AddType application/octet-stream dmg
AddType application/octet-stream dms
AddType application/octet-stream dump
AddType application/octet-stream elc
AddType application/octet-stream iso
AddType application/octet-stream lha
AddType application/octet-stream lzh
AddType application/octet-stream scpt
AddType application/octet-stream so
AddType application/oda oda
AddType application/ogg ogg
AddType application/pdf pdf
AddType application/pgp-encrypted pgp
AddType application/pgp-signature asc
AddType application/pgp-signature sig
AddType application/pics-rules prf
AddType application/pkcs10 p10
AddType application/pkcs7-mime p7c
AddType application/pkcs7-mime p7m
AddType application/pkcs7-signature p7s
AddType application/pkix-cert cer
AddType application/pkix-crl crl
AddType application/pkix-pkipath pkipath
AddType application/pkixcmp pki
AddType application/pls+xml pls
AddType application/postscript ai
AddType application/postscript eps
AddType application/postscript ps
AddType application/prs.cww cww
AddType application/rdf+xml rdf
AddType application/reginfo+xml rif
AddType application/relax-ng-compact-syntax rnc
AddType application/resource-lists+xml rl
AddType application/rls-services+xml rs
AddType application/rsd+xml rsd
AddType application/rss+xml rss
AddType application/rtf rtf
AddType application/sbml+xml sbml
AddType application/sdp sdp
AddType application/set-payment-initiation setpay
AddType application/set-registration-initiation setreg
AddType application/shf+xml shf
AddType application/smil+xml smi
AddType application/smil+xml smil
AddType application/srgs gram
AddType application/srgs+xml grxml
AddType application/ssml+xml ssml
AddType application/vnd.3gpp.pic-bw-large plb
AddType application/vnd.3gpp.pic-bw-small psb
AddType application/vnd.3gpp.pic-bw-var pvb
AddType application/vnd.3m.post-it-notes pwn
AddType application/vnd.accpac.simply.aso aso
AddType application/vnd.accpac.simply.imp imp
AddType application/vnd.acucobol acu
AddType application/vnd.acucorp acutc
AddType application/vnd.acucorp atc
AddType application/vnd.adobe.xdp+xml xdp
AddType application/vnd.adobe.xfdf xfdf
AddType application/vnd.amiga.ami ami
AddType application/vnd.anser-web-certificate-issue-initiation cii
AddType application/vnd.anser-web-funds-transfer-initiation fti
AddType application/vnd.antix.game-component atx
AddType application/vnd.apple.installer+xml mpkg
AddType application/vnd.apple.installer+xml pkg
AddType application/vnd.audiograph aep
AddType application/vnd.blueice.multipass mpm
AddType application/vnd.bmi bmi
AddType application/vnd.businessobjects rep
AddType application/vnd.chemdraw+xml cdxml
AddType application/vnd.chipnuts.karaoke-mmd mmd
AddType application/vnd.cinderella cdy
AddType application/vnd.claymore cla
AddType application/vnd.clonk.c4group c4d
AddType application/vnd.clonk.c4group c4f
AddType application/vnd.clonk.c4group c4g
AddType application/vnd.clonk.c4group c4p
AddType application/vnd.clonk.c4group c4u
AddType application/vnd.commonspace csp
AddType application/vnd.commonspace cst
AddType application/vnd.contact.cmsg cdbcmsg
AddType application/vnd.cosmocaller cmc
AddType application/vnd.crick.clicker clkx
AddType application/vnd.crick.clicker.keyboard clkk
AddType application/vnd.crick.clicker.palette clkp
AddType application/vnd.crick.clicker.template clkt
AddType application/vnd.crick.clicker.wordbank clkw
AddType application/vnd.criticaltools.wbs+xml wbs
AddType application/vnd.ctc-posml pml
AddType application/vnd.cups-ppd ppd
AddType application/vnd.curl curl
AddType application/vnd.data-vision.rdz rdz
AddType application/vnd.denovo.fcselayout-link fe_launch
AddType application/vnd.dna dna
AddType application/vnd.dolby.mlp mlp
AddType application/vnd.dpgraph dpg
AddType application/vnd.dreamfactory dfac
AddType application/vnd.ecowin.chart mag
AddType application/vnd.enliven nml
AddType application/vnd.epson.esf esf
AddType application/vnd.epson.msf msf
AddType application/vnd.epson.quickanime qam
AddType application/vnd.epson.salt slt
AddType application/vnd.epson.ssf ssf
AddType application/vnd.eszigno3+xml es3 et3
AddType application/vnd.ezpix-album ez2
AddType application/vnd.ezpix-package ez3
AddType application/vnd.fdf fdf
AddType application/vnd.flographit gph
AddType application/vnd.fluxtime.clip ftc
AddType application/vnd.framemaker fm
AddType application/vnd.framemaker frame
AddType application/vnd.framemaker maker
AddType application/vnd.frogans.fnc fnc
AddType application/vnd.frogans.ltf ltf
AddType application/vnd.fsc.weblaunch fsc
AddType application/vnd.fujitsu.oasys oas
AddType application/vnd.fujitsu.oasys2 oa2
AddType application/vnd.fujitsu.oasys3 oa3
AddType application/vnd.fujitsu.oasysgp fg5
AddType application/vnd.fujitsu.oasysprs bh2
AddType application/vnd.fujixerox.ddd ddd
AddType application/vnd.fujixerox.docuworks xdw
AddType application/vnd.fujixerox.docuworks.binder xbd
AddType application/vnd.fuzzysheet fzs
AddType application/vnd.genomatix.tuxedo txd
AddType application/vnd.google-earth.kml+xml kml
AddType application/vnd.google-earth.kmz kmz
AddType application/vnd.grafeq gqf
AddType application/vnd.grafeq gqs
AddType application/vnd.groove-account gac
AddType application/vnd.groove-help ghf
AddType application/vnd.groove-identity-message gim
AddType application/vnd.groove-injector grv
AddType application/vnd.groove-tool-message gtm
AddType application/vnd.groove-tool-template tpl
AddType application/vnd.groove-vcard vcg
AddType application/vnd.handheld-entertainment+xml zmm
AddType application/vnd.hbci hbci
AddType application/vnd.hhe.lesson-player les
AddType application/vnd.hp-hpgl hpgl
AddType application/vnd.hp-hpid hpid
AddType application/vnd.hp-hps hps
AddType application/vnd.hp-jlyt jlt
AddType application/vnd.hp-pcl pcl
AddType application/vnd.hp-pclxl pclxl
AddType application/vnd.hzn-3d-crossword x3d
AddType application/vnd.ibm.minipay mpy
AddType application/vnd.ibm.modcap afp
AddType application/vnd.ibm.modcap list3820
AddType application/vnd.ibm.modcap listafp
AddType application/vnd.ibm.rights-management irm
AddType application/vnd.ibm.secure-container sc
AddType application/vnd.igloader igl
AddType application/vnd.immervision-ivp ivp
AddType application/vnd.immervision-ivu ivu
AddType application/vnd.intercon.formnet xpw
AddType application/vnd.intercon.formnet xpx
AddType application/vnd.intu.qbo qbo
AddType application/vnd.intu.qfx qfx
AddType application/vnd.ipunplugged.rcprofile rcprofile
AddType application/vnd.irepository.package+xml irp
AddType application/vnd.is-xpr xpr
AddType application/vnd.jam jam
AddType application/vnd.jcp.javame.midlet-rms rms
AddType application/vnd.jisp jisp
AddType application/vnd.kahootz ktr
AddType application/vnd.kahootz ktz
AddType application/vnd.kde.karbon karbon
AddType application/vnd.kde.kchart chrt
AddType application/vnd.kde.kformula kfo
AddType application/vnd.kde.kivio flw
AddType application/vnd.kde.kontour kon
AddType application/vnd.kde.kpresenter kpr
AddType application/vnd.kde.kpresenter kpt
AddType application/vnd.kde.kspread ksp
AddType application/vnd.kde.kword kwd
AddType application/vnd.kde.kword kwt
AddType application/vnd.kenameaapp htke
AddType application/vnd.kidspiration kia
AddType application/vnd.kinar kne
AddType application/vnd.kinar knp
AddType application/vnd.koan skd
AddType application/vnd.koan skm
AddType application/vnd.koan skp
AddType application/vnd.koan skt
AddType application/vnd.llamagraphics.life-balance.desktop lbd
AddType application/vnd.llamagraphics.life-balance.exchange+xml lbe
AddType application/vnd.lotus-1-2-3 123
AddType application/vnd.lotus-approach apr
AddType application/vnd.lotus-freelance pre
AddType application/vnd.lotus-notes nsf
AddType application/vnd.lotus-organizer org
AddType application/vnd.lotus-screencam scm
AddType application/vnd.lotus-wordpro lwp
AddType application/vnd.macports.portpkg portpkg
AddType application/vnd.mcd mcd
AddType application/vnd.medcalcdata mc1
AddType application/vnd.mediastation.cdkey cdkey
AddType application/vnd.mfer mwf
AddType application/vnd.mfmp mfm
AddType application/vnd.micrografx.flo flo
AddType application/vnd.micrografx.igx igx
AddType application/vnd.mif mif
AddType application/vnd.mobius.daf daf
AddType application/vnd.mobius.dis dis
AddType application/vnd.mobius.mbk mbk
AddType application/vnd.mobius.mqy mqy
AddType application/vnd.mobius.msl msl
AddType application/vnd.mobius.plc plc
AddType application/vnd.mobius.txf txf
AddType application/vnd.mophun.application mpn
AddType application/vnd.mophun.certificate mpc
AddType application/vnd.mozilla.xul+xml xul
AddType application/vnd.ms-artgalry cil
AddType application/vnd.ms-asf asf
AddType application/vnd.ms-cab-compressed cab
AddType application/vnd.ms-excel xla
AddType application/vnd.ms-excel xlc
AddType application/vnd.ms-excel xlm
AddType application/vnd.ms-excel xls
AddType application/vnd.ms-excel xlt
AddType application/vnd.ms-excel xlw
AddType application/vnd.ms-fontobject eot
AddType application/vnd.ms-htmlhelp chm
AddType application/vnd.ms-ims ims
AddType application/vnd.ms-lrm lrm
AddType application/vnd.ms-powerpoint pot
AddType application/vnd.ms-powerpoint pps
AddType application/vnd.ms-powerpoint ppt
AddType application/vnd.ms-project mpp
AddType application/vnd.ms-project mpt
AddType application/vnd.ms-works wcm
AddType application/vnd.ms-works wdb
AddType application/vnd.ms-works wks
AddType application/vnd.ms-works wps
AddType application/vnd.ms-wpl wpl
AddType application/vnd.ms-xpsdocument xps
AddType application/vnd.mseq mseq
AddType application/vnd.musician mus
AddType application/vnd.neurolanguage.nlu nlu
AddType application/vnd.noblenet-directory nnd
AddType application/vnd.noblenet-sealer nns
AddType application/vnd.noblenet-web nnw
AddType application/vnd.nokia.n-gage.data ngdat
AddType application/vnd.nokia.n-gage.symbian.install n-gage
AddType application/vnd.nokia.radio-preset rpst
AddType application/vnd.nokia.radio-presets rpss
AddType application/vnd.novadigm.edm edm
AddType application/vnd.novadigm.edx edx
AddType application/vnd.novadigm.ext ext
AddType application/vnd.oasis.opendocument.chart odc
AddType application/vnd.oasis.opendocument.chart-template otc
AddType application/vnd.oasis.opendocument.formula odf
AddType application/vnd.oasis.opendocument.formula-template otf
AddType application/vnd.oasis.opendocument.graphics odg
AddType application/vnd.oasis.opendocument.graphics-template otg
AddType application/vnd.oasis.opendocument.image odi
AddType application/vnd.oasis.opendocument.image-template oti
AddType application/vnd.oasis.opendocument.presentation odp
AddType application/vnd.oasis.opendocument.presentation-template otp
AddType application/vnd.oasis.opendocument.spreadsheet ods
AddType application/vnd.oasis.opendocument.spreadsheet-template ots
AddType application/vnd.oasis.opendocument.text odt
AddType application/vnd.oasis.opendocument.text-master otm
AddType application/vnd.oasis.opendocument.text-template ott
AddType application/vnd.oasis.opendocument.text-web oth
AddType application/vnd.olpc-sugar xo
AddType application/vnd.oma.dd2+xml dd2
AddType application/vnd.openofficeorg.extension oxt
AddType application/vnd.osgi.dp dp
AddType application/vnd.palm oprc
AddType application/vnd.palm pdb
AddType application/vnd.palm pqa
AddType application/vnd.palm prc
AddType application/vnd.pg.format str
AddType application/vnd.pg.osasli ei6
AddType application/vnd.picsel efif
AddType application/vnd.pocketlearn plf
AddType application/vnd.powerbuilder6 pbd
AddType application/vnd.previewsystems.box box
AddType application/vnd.proteus.magazine mgz
AddType application/vnd.publishare-delta-tree qps
AddType application/vnd.pvi.ptid1 ptid
AddType application/vnd.quark.quarkxpress qwd
AddType application/vnd.quark.quarkxpress qwt
AddType application/vnd.quark.quarkxpress qxb
AddType application/vnd.quark.quarkxpress qxd
AddType application/vnd.quark.quarkxpress qxl
AddType application/vnd.quark.quarkxpress qxt
AddType application/vnd.recordare.musicxml mxl
# AddType application/vnd.rn-realmedia rm
AddType application/vnd.seemail see
AddType application/vnd.sema sema
AddType application/vnd.semd semd
AddType application/vnd.semf semf
AddType application/vnd.shana.informed.formdata ifm
AddType application/vnd.shana.informed.formtemplate itp
AddType application/vnd.shana.informed.interchange iif
AddType application/vnd.shana.informed.package ipk
AddType application/vnd.simtech-mindmapper twd
AddType application/vnd.simtech-mindmapper twds
AddType application/vnd.smaf mmf
AddType application/vnd.solent.sdkm+xml sdkd
AddType application/vnd.solent.sdkm+xml sdkm
AddType application/vnd.spotfire.dxp dxp
AddType application/vnd.spotfire.sfs sfs
AddType application/vnd.sus-calendar sus
AddType application/vnd.sus-calendar susp
AddType application/vnd.svd svd
AddType application/vnd.syncml+xml xsm
AddType application/vnd.syncml.dm+wbxml bdm
AddType application/vnd.syncml.dm+xml xdm
AddType application/vnd.tao.intent-module-archive tao
AddType application/vnd.tmobile-livetv tmo
AddType application/vnd.trid.tpt tpt
AddType application/vnd.triscape.mxs mxs
AddType application/vnd.trueapp tra
AddType application/vnd.ufdl ufd
AddType application/vnd.ufdl ufdl
AddType application/vnd.uiq.theme utz
AddType application/vnd.umajin umj
AddType application/vnd.unity unityweb
AddType application/vnd.uoml+xml uoml
AddType application/vnd.vcx vcx
AddType application/vnd.visio vsd
AddType application/vnd.visio vss
AddType application/vnd.visio vst
AddType application/vnd.visio vsw
AddType application/vnd.visionary vis
AddType application/vnd.vsf vsf
AddType application/vnd.wap.wbxml wbxml
AddType application/vnd.wap.wmlc wmlc
AddType application/vnd.wap.wmlscriptc wmlsc
AddType application/vnd.webturbo wtb
AddType application/vnd.wordperfect wpd
AddType application/vnd.wqd wqd
AddType application/vnd.wt.stf stf
AddType application/vnd.xara xar
AddType application/vnd.xfdl xfdl
AddType application/vnd.yamaha.hv-dic hvd
AddType application/vnd.yamaha.hv-script hvs
AddType application/vnd.yamaha.hv-voice hvp
AddType application/vnd.yamaha.smaf-audio saf
AddType application/vnd.yamaha.smaf-phrase spf
AddType application/vnd.yellowriver-custom-menu cmp
AddType application/vnd.zzazz.deck+xml zaz
AddType application/voicexml+xml vxml
AddType application/winhlp hlp
AddType application/wsdl+xml wsdl
AddType application/wspolicy+xml wspolicy
AddType application/x-ace-compressed ace
AddType application/x-bcpio bcpio
AddType application/x-bittorrent torrent
AddType application/x-bzip bz
AddType application/x-bzip2 boz
AddType application/x-bzip2 bz2
AddType application/x-cdlink vcd
AddType application/x-chat chat
AddType application/x-chess-pgn pgn
AddType application/x-cpio cpio
AddType application/x-csh csh
AddType application/x-director dcr
AddType application/x-director dir
AddType application/x-director dxr
AddType application/x-director fgd
AddType application/x-dvi dvi
AddType application/x-futuresplash spl
AddType application/x-gtar gtar
AddType application/x-hdf hdf
AddType application/x-httpd-php php
AddType application/x-httpd-php-source phps
AddType application/x-httpd-php3 php3
AddType application/x-java-jnlp-file jnlp
AddType application/x-latex latex
AddType application/x-ms-wmd wmd
AddType application/x-ms-wmz wmz
AddType application/x-msaccess mdb
AddType application/x-msbinder obd
AddType application/x-mscardfile crd
AddType application/x-msclip clp
AddType application/x-msdownload bat
AddType application/x-msdownload com
AddType application/x-msdownload dll
AddType application/x-msdownload exe
AddType application/x-msdownload msi
AddType application/x-msmediaview m13
AddType application/x-msmediaview m14
AddType application/x-msmediaview mvb
AddType application/x-msmetafile wmf
AddType application/x-msmoney mny
AddType application/x-mspublisher pub
AddType application/x-msschedule scd
AddType application/x-msterminal trm
AddType application/x-mswrite wri
AddType application/x-netcdf cdf
AddType application/x-netcdf nc
AddType application/x-pkcs12 p12
AddType application/x-pkcs12 pfx
AddType application/x-pkcs7-certificates p7b
AddType application/x-pkcs7-certificates spc
AddType application/x-pkcs7-certreqresp p7r
AddType application/x-quicktimeplayer qtl
AddType application/x-rar-compressed rar
AddType application/x-sh sh
AddType application/x-shar shar
AddType application/x-shockwave-flash swf
AddType application/x-stuffit sit
AddType application/x-stuffitx sitx
AddType application/x-sv4cpio sv4cpio
AddType application/x-sv4crc sv4crc
AddType application/x-tar tar
AddType application/x-tar tgz
AddType application/x-tcl tcl
AddType application/x-tex tex
AddType application/x-texinfo texi
AddType application/x-texinfo texinfo
AddType application/x-ustar ustar
AddType application/x-wais-source src
AddType application/x-x509-ca-cert crt
AddType application/x-x509-ca-cert der
AddType application/xenc+xml xenc
AddType application/xhtml+xml xht
AddType application/xhtml+xml xhtm
AddType application/xhtml+xml xhtml
AddType application/xml xml
AddType application/xml xsl
AddType application/xml-dtd dtd
AddType application/xop+xml xop
AddType application/xslt+xml xslt
AddType application/xspf+xml xspf
AddType application/xv+xml mxml
AddType application/xv+xml xhvml
AddType application/xv+xml xvm
AddType application/xv+xml xvml
AddType application/zip zip
AddType audio/basic au
AddType audio/basic snd
AddType audio/midi kar
AddType audio/midi mid
AddType audio/midi midi
AddType audio/midi rmi
AddType audio/mp4 mp4a
AddType audio/mp4a-latm m4a
AddType audio/mp4a-latm m4p
AddType audio/mpeg m2a
AddType audio/mpeg m3a
AddType audio/mpeg mp2
AddType audio/mpeg mp2a
AddType audio/mpeg mp3
AddType audio/mpeg mpga
AddType audio/vnd.digital-winds eol
AddType audio/vnd.lucent.voice lvp
AddType audio/vnd.nuera.ecelp4800 ecelp4800
AddType audio/vnd.nuera.ecelp7470 ecelp7470
AddType audio/vnd.nuera.ecelp9600 ecelp9600
AddType audio/wav wav
AddType audio/x-aiff aif
AddType audio/x-aiff aifc
AddType audio/x-aiff aiff
AddType audio/x-m4a m4a
AddType audio/x-mpegurl m3u
AddType audio/x-ms-wax wax
AddType audio/x-ms-wma wma
AddType audio/x-pn-realaudio ra
AddType audio/x-pn-realaudio ram
AddType audio/x-pn-realaudio rm
AddType audio/x-pn-realaudio-plugin rmp
AddType audio/x-scpls pls
AddType audio/x-wav wav
AddType chemical/x-cdx cdx
AddType chemical/x-cif cif
AddType chemical/x-cmdf cmdf
AddType chemical/x-cml cml
AddType chemical/x-csml csml
AddType chemical/x-pdb pdb
AddType chemical/x-xyz xyz
AddType image/bmp bmp
AddType image/cgm cgm
AddType image/g3fax g3
AddType image/gif gif
AddType image/ief ief
AddType image/jp2 jp2
AddType image/jpeg jpe
AddType image/jpeg jpeg
AddType image/jpeg jpg
AddType image/pict pct
AddType image/pict pic
AddType image/pict pict
AddType image/png png
AddType image/prs.btif btif
AddType image/svg+xml svg
AddType image/svg+xml svgz
AddType image/tiff tif
AddType image/tiff tiff
AddType image/vnd.adobe.photoshop psd
AddType image/vnd.djvu djv
AddType image/vnd.djvu djvu
AddType image/vnd.dwg dwg
AddType image/vnd.dxf dxf
AddType image/vnd.fastbidsheet fbs
AddType image/vnd.fpx fpx
AddType image/vnd.fst fst
AddType image/vnd.fujixerox.edmics-mmr mmr
AddType image/vnd.fujixerox.edmics-rlc rlc
AddType image/vnd.microsoft.icon ico
AddType image/vnd.ms-modi mdi
AddType image/vnd.net-fpx npx
AddType image/vnd.wap.wbmp wbmp
AddType image/vnd.xiff xif
AddType image/x-cmu-raster ras
AddType image/x-cmx cmx
AddType image/x-macpaint mac
AddType image/x-macpaint pnt
AddType image/x-macpaint pntg
AddType image/x-pcx pcx
AddType image/x-pict pct
AddType image/x-pict pic
AddType image/x-portable-anymap pnm
AddType image/x-portable-bitmap pbm
AddType image/x-portable-graymap pgm
AddType image/x-portable-pixmap ppm
AddType image/x-quicktime qti
AddType image/x-quicktime qtif
AddType image/x-rgb rgb
AddType image/x-xbitmap xbm
AddType image/x-xpixmap xpm
AddType image/x-xwindowdump xwd
AddType message/rfc822 eml
AddType message/rfc822 mime
AddType model/iges iges
AddType model/iges igs
AddType model/mesh mesh
AddType model/mesh msh
AddType model/mesh silo
AddType model/vnd.dwf dwf
AddType model/vnd.gdl gdl
AddType model/vnd.gtw gtw
AddType model/vnd.mts mts
AddType model/vnd.vtu vtu
AddType model/vrml vrml
AddType model/vrml wrl
AddType text/calendar ics
AddType text/calendar ifb
AddType text/css css
AddType text/csv csv
AddType text/html htm
AddType text/html html
AddType text/html shtml
AddType text/plain asc
AddType text/plain conf
AddType text/plain def
AddType text/plain in
AddType text/plain list
AddType text/plain log
AddType text/plain text
AddType text/plain txt
AddType text/prs.lines.tag dsc
AddType text/richtext rtx
AddType text/rtf rtf
AddType text/sgml sgm
AddType text/sgml sgml
AddType text/tab-separated-values tsv
AddType text/troff man
AddType text/troff me
AddType text/troff ms
AddType text/troff roff
AddType text/troff t
AddType text/troff tr
AddType text/uri-list uri
AddType text/uri-list uris
AddType text/uri-list urls
AddType text/vnd.fly fly
AddType text/vnd.fmi.flexstor flx
AddType text/vnd.in3d.3dml 3dml
AddType text/vnd.in3d.spot spot
AddType text/vnd.sun.j2me.app-descriptor jad
AddType text/vnd.wap.wml wml
AddType text/vnd.wap.wmlscript wmls
AddType text/x-asm s
AddType text/x-asm sm
AddType text/x-c c
AddType text/x-c cc
AddType text/x-c cpp
AddType text/x-c cxx
AddType text/x-c dic
AddType text/x-c h
AddType text/x-c hh
AddType text/x-fortran f
AddType text/x-fortran f77
AddType text/x-fortran f90
AddType text/x-fortran for
AddType text/x-java-source java
AddType text/x-pascal p
AddType text/x-pascal pas
AddType text/x-setext etx
AddType text/x-uuencode uu
AddType text/x-vcalendar vcs
AddType text/x-vcard vcf
AddType video/3gp2 3gp2
AddType video/3gpp 3gp
AddType video/3gpp 3gpp
AddType video/3gpp2 3g2
AddType video/h261 h261
AddType video/h263 h263
AddType video/h264 h264
AddType video/jpeg jpgv
AddType video/jpm jpgm
AddType video/jpm jpm
AddType video/mj2 mj2
AddType video/mj2 mjp2
AddType video/mp4 m4v
AddType video/mp4 mp4
AddType video/mp4 mp4v
AddType video/mp4 mpg4
AddType video/mpeg m1v
AddType video/mpeg m2v
AddType video/mpeg mpe
AddType video/mpeg mpeg
AddType video/mpeg mpg
AddType video/quicktime mov
AddType video/quicktime qt
AddType video/vnd.fvt fvt
AddType video/vnd.mpegurl m4u
AddType video/vnd.mpegurl mxu
AddType video/vnd.vivo viv
AddType video/x-dv dif
AddType video/x-dv dv
AddType video/x-fli fli
AddType video/x-ms-asf asf
AddType video/x-ms-asf asx
AddType video/x-ms-wm wm
AddType video/x-ms-wmv wmv
AddType video/x-ms-wmx wmx
AddType video/x-ms-wvx wvx
AddType video/x-msvideo avi
AddType video/x-sgi-movie movie
AddType x-conference/x-cooltalk ice
# Settings for hosting different languages.
# Required modules: mod_mime, mod_negotiation
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
AddCharset us-ascii.ascii .us-ascii
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
AddCharset ISO-8859-7 .iso8859-7 .grk .greek
AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
AddCharset ISO-8859-10 .iso8859-10 .latin6
AddCharset ISO-8859-13 .iso8859-13
AddCharset ISO-8859-14 .iso8859-14 .latin8
AddCharset ISO-8859-15 .iso8859-15 .latin9
AddCharset ISO-8859-16 .iso8859-16 .latin10
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5.Big5 .big5 .b5
AddCharset cn-Big5 .cn-big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8 .koi8
AddCharset KOI8-E .koi8-e
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-U .koi8-u
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-7 .utf7
AddCharset UTF-8 .utf8
AddCharset UTF-16 .utf16
AddCharset UTF-16BE .utf16be
AddCharset UTF-16LE .utf16le
AddCharset UTF-32 .utf32
AddCharset UTF-32BE .utf32be
AddCharset UTF-32LE .utf32le
AddCharset euc-cn .euc-cn
AddCharset euc-gb .euc-gb
AddCharset euc-jp .euc-jp
AddCharset euc-kr .euc-kr
#Not sure how euc-tw got in - IANA doesn't list it???
AddCharset EUC-TW .euc-tw
AddCharset gb2312 .gb2312 .gb
AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
AddCharset shift_jis .shift_jis .sjis
</IfModule>
## The modmimemagic module allows the server to use various hints from the
## contents of the file itself to determine its type. The MIMEMagicFile
## directive tells the module where the hint definitions are located.
<IfModule modmimemagic.c>
MIMEMagicFile /etc/apache2/magic
</IfModule>
## HostnameLookups: Log the names of clients or just their IP addresses
## e.g., www.apache.org (on) or 204.62.129.132 (off).
## The default is off because it'd be overall better for the net if people
## had to knowingly turn this feature on, since enabling it means that
## each client request will result in AT LEAST one lookup request to the
## nameserver.
HostnameLookups Off
## LogLevel: Control the number of messages logged to the error_log.
## Possible values include: debug, info, notice, warn, error, crit,
## alert, emerg.
LogLevel warn
<IfModule modlogconfig.c>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
<IfModule mod_logio.c>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
#### For Mac OS X Server: Server Admin manages CustomLog directives
#### on a virtual host basis.
#CustomLog /var/log/apache2/access_log common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog /var/log/apache2/access_log combined
</IfModule>
## Optionally add a line containing the server version and virtual host
## name to server-generated pages (error documents, FTP directory listings,
## mod_status and mod_info output etc., but not CGI generated documents).
## Set to "EMail" to also include a mailto: link to the ServerAdmin.
## Set to one of: On | Off | EMail
ServerSignature On
UseCanonicalName Off
## Aliases: Add here as many aliases as you need (with no limit). The format is
## Alias fakename realname
<IfModule mod_alias.c>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"
#### For Mac OS X Server: Uncomment this line to enable web-based
#### configuration of mailman:
#Include /etc/apache2/httpd_mailman.conf
<IfModule mod_setenvif.c>
<IfModule mod_negotiation.c>
# Allow convenient access to Apache manual
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br|ru))?(/.*)?$ "/Library/WebServer/share/httpd/manual$1"
<Directory "/Library/WebServer/share/httpd/manual">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
<Files *.html>
SetHandler type-map
</Files>
SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|pt-br|ru)/ prefer-language=$1
RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|pt-br|ru)){2,}(/.*)?$ /manual/$1$2
LanguagePriority en de es fr ja ko pt-br ru ForceLanguagePriority Prefer Fallback
</Directory>
</IfModule>
</IfModule>
</IfModule>
## Directives controlling the display of server-generated directory listings.
#### For Mac OS X Server: Note that indexing is further controlled
#### by the Server Admin application, which adds "Options +/-Indexes
#### in the virtual host scope.
<IfModule mod_autoindex.c>
## FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
## AddIcon* directives tell the server which icon to show for different
## files or filename extensions. These are only displayed for
## FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
## DefaultIcon is which icon to show for files which do not have an icon
## explicitly set.
DefaultIcon /icons/unknown.gif
## AddDescription allows you to place a short description after a file in
## server-generated indexes. These are only displayed for FancyIndexed
## directories.
## Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#AddDescription "Mac OS Disk Image file" .dmg
## ReadmeName is the name of the README file the server will look for by
## default, and append to directory listings.
## HeaderName is the name of a file which should be prepended to
## directory indexes.
## If MultiViews are amongst the Options in effect, the server will
## first look for name.html and include it if found. If name.html
## doesn't exist, the server will then look for name.txt and include
## it as plaintext if found.
ReadmeName README
HeaderName HEADER
## IndexIgnore is a set of filenames which directory indexing should ignore
## and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
## MetaDir: specifies the name of the directory in which Apache can find
## meta information files. These files contain additional HTTP headers
## to include when sending the document
#MetaDir .web
## MetaSuffix: specifies the file name suffix for the file containing the
## meta information.
#MetaSuffix .meta
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# The configuration below implements multi-language error documents through
# content-negotiation, and via the default Alias for /error in the vhost config file.
<Directory "/usr/share/httpd/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
</Directory>
ErrorDocument 400 /error/HTTPBADREQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTPNOTFOUND.html.var
ErrorDocument 405 /error/HTTPMETHOD_NOTALLOWED.html.var
ErrorDocument 408 /error/HTTPREQUEST_TIMEOUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTPLENGTHREQUIRED.html.var
ErrorDocument 412 /error/HTTPPRECONDITIONFAILED.html.var
ErrorDocument 413 /error/HTTPREQUEST_ENTITY_TOOLARGE.html.var
ErrorDocument 414 /error/HTTPREQUEST_URI_TOOLARGE.html.var
ErrorDocument 415 /error/HTTPUNSUPPORTED_MEDIATYPE.html.var
ErrorDocument 500 /error/HTTPINTERNAL_SERVERERROR.html.var
ErrorDocument 501 /error/HTTPNOTIMPLEMENTED.html.var
ErrorDocument 502 /error/HTTPBADGATEWAY.html.var
ErrorDocument 503 /error/HTTPSERVICEUNAVAILABLE.html.var
ErrorDocument 506 /error/HTTPVARIANT_ALSOVARIES.html.var
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
<IfModule mod_status.c>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
</IfModule>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
#<IfModule mod_info.c>
# <Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
# </Location>
#</IfModule>
## Proxy Server directives.
<IfModule mod_proxy.c>
ProxyRequests Off
<IfModule moddiskcache.c>
CacheEnable disk /
CacheRoot "/var/run/proxy"
</IfModule>
</IfModule>
## SSL stuff
<IfModule mod_ssl.c>
SetEnvIf User-Agent ".MSIE." nokeepalive ssl-unclean-shutdown
SSLPassPhraseDialog exec:/etc/apache2/getsslpassphrase
SSLSessionCache shmcb:/var/run/ssl_scache(512000)
SSLSessionCacheTimeout 300
SSLMutex file:/var/log/apache2/ssl_mutex
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
AddType application/x-x509-ca-cert crt
AddType application/x-pkcs7-crl crl
</IfModule>
<IfModule mod_jk.c>
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
JkLogLevel error
JkMount /*.jsp JBoss1
JkMount /servlet/* JBoss1
JkMount /examples/* JBoss1
</IfModule>
## The default server is used for status on a special port
#ServerName www.example.com
Listen 127.0.0.1:9010
DocumentRoot "/var/empty"
ErrorLog "/var/log/apache2/error_log"
<Directory /var/empty>
Order Deny,Allow
Deny from All
</Directory>
<IfModule modspotlightapple2.c>
Spotlight On
</IfModule>
<IfModule modauth_digestapple.c>
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
</IfModule>
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteCond %{REQUEST_METHOD} ^TRACE
RewriteRule .* - [F]
</IfModule>
<IfModule mod_headers.c>
Header add MS-Author-Via "DAV"
RequestHeader set XFORWARDEDPROTO 'https' env=https
</IfModule>
<IfModule mod_encoding.c>
EncodingEngine on
NormalizeUsername on
DefaultClientEncoding UTF-8
# Windows XP?
AddClientEncoding "Microsoft-WebDAV-MiniRedir/" MSUTF-8
# Windows 2K SP2 with .NET
AddClientEncoding "(Microsoft .* DAV\$)" MSUTF-8
# Windows 2K SP2/Windows XP
AddClientEncoding "(Microsoft .* DAV 1.1)" CP932
# Windows XP?
AddClientEncoding "Microsoft-WebDAV*" CP932
# RealPlayer
AddClientEncoding "RMA/*" CP932
# MacOS X webdavfs
AddClientEncoding "WebDAVFS" UTF-8
# cadaver
AddClientEncoding "cadaver/" EUC-JP
</IfModule>
RLimitNPROC max max
ExtendedStatus On
Timeout 300
KeepAlive On
MaxKeepAliveRequests 500
KeepAliveTimeout 15
# As of Mac OS X Server 10.5, the compiled-in server limit is 2048
ServerLimit 2048
# Server Admin manages ListenBackLog as a function of MaxClients: min(511, MaxClients/2)
MaxClients 1024
ListenBackLog 512
# Including WebObjects Configs
Include /System/Library/WebObjects/Adaptors/Apache2.2/apache.conf
#### The following Include directive is essential for the virtual hosts to be usable.
Include "/etc/apache2/sites/*.conf"
========HTTPD.CONF==========I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
mod_rewrite is enabled and running on the server.
I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
-- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
<code>
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]]
<code> -
Inserting data with the help of nested table...!!!
The following block is giving error
ORA-06502: PL/SQL: numeric or value error
the signature and signature_bkp have the same structure
So, can anybody help me out to solve this issue :
for copying records from one table to another table
Thanking You advancely
DECLARE
CURSOR c1
IS
SELECT *
FROM signature
WHERE creation_time > TRUNC ( SYSDATE ) - 100
AND ROWNUM < 102;
TYPE sig_typ IS TABLE OF signature%ROWTYPE;
sig_t sig_typ;
BEGIN
OPEN c1;
FETCH c1
BULK COLLECT INTO sig_t;
CLOSE c1;
FORALL i IN sig_t.FIRST .. sig_t.LAST
INSERT INTO signature_bkp
VALUES sig_t ( i );
COMMIT;
END;
--DKarOr whether a INSERT statement with SELECT clause will do that for youby using this technique, it took 47:08:45 to copy 7252 rows
and by using a cursor for loop took 49:03:23 to copy 13567 rows
So there was appox. 40% increase in performance by using pl/sql. I thought it could be even faster using the bulk-bind ing features and nested tables.
OR i just want to know ....how to correct the block of code that was given in my 1st msg without changing its logic.
Thanks
--DKar -
How to track signon in a query? XMLP-Doku?
Hello,
can anyone give me a brief example how to track signon in a query to limit data in the standalone version of XMLP? Unfortunatly the user manual (PDF) doesn't describe that. The threads in this forum which tell this quit short didn't work to me.
Is there any other important manual or book about XMLP except the PDF user manual?
Thanks in advance
Ralf KanisWe wanted to trap the sign-on but oracle has the following response. I heard you can modify the xdo file but this solution is not a long term solution.
Following is the reply from the development:
There is a bug in XMLP 5.6.2 which prevents dynamically passing username in sql, and would be fixed in the next release. Also it req
uires editing report file manually as the UI does not support this username bind
ing in 5.6.2. -
Plz help me!!! I need to create a slide...
How can I create a button that will slide to one side when click, and then slide back when click again?
If someone knows about the coding plz pass me the code. Thanks!!!http://designreviver.com/tutorials/jquery-examples-horizontal-accordion/
http://www.gethifi.com/blog/tutorial-a-horizontal-jquery-accordion-using-custom-event-bind ing
http://www.madeincima.eu/samples/jquery/easyAccordion/
Finally, for a very good commercial solution that uses Dreamweaver extensions you should take a look a the Project Seven web site.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
Shopping Cart for Adobe Dreamweaver
available in PHP, ColdFusion, and ASP
Stay updated - http://blog.cartweaver.com -
Did not find needed xsi:type attribute on element anyType
The followings exception is thrown when using the access a web service using the
proxy jar.
The return xml contains
<debts xm:bind="debts is return.safaccount.debts">
<anyType xm:multiple="debt in return.safaccount.debts">{debt}</anyType>
</debts>
debts is a vector contains Serializable Object class.
How do you resolve this?
<Nov 14, 2002 2:36:27 PM ICT> <Error> <HTTP> <101019> <[ServletContext(id=553030
0,name=EAIService,context-path=/EAIService)] Servlet failed with IOException
java.rmi.RemoteException: web service invoke failed; nested exception is:
javax.xml.soap.SOAPException: failed to deserialize xml:weblogic.xml.sch
ema.binding.DeserializationException: did not find needed xsi:type attribute on
element <anyType>
javax.xml.soap.SOAPException: failed to deserialize xml:weblogic.xml.schema.bind
ing.DeserializationException: did not find needed xsi:type attribute on element
<anyType>
at weblogic.webservice.core.DefaultPart.toJava(DefaultPart.java:296)
at weblogic.webservice.core.DefaultMessage.toJava(DefaultMessage.java:35
9)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:465)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.javHi Daniel,
This is really an "constructing and XMLMap issue" with WebLogic Workshop, so I
would post it on that newsweb group:
weblogic.developer.interest.workshop
BTW: Serialization/Deserialization required instanciable classes with no-arg constructors.
You should attach the WSDL for this web service, so that folks can see what Workshop
generated for the schema element(s). This (the schema elements) is probably where
the problem starts :-) Also, state if that is the default xmlmap generated by
Workshop, or a custom one.
Regards,
Mike Wooten
"daniel" <[email protected]> wrote:
>
The followings exception is thrown when using the access a web service
using the
proxy jar.
The return xml contains
<debts xm:bind="debts is return.safaccount.debts">
<anyType xm:multiple="debt in return.safaccount.debts">{debt}</anyType>
</debts>
debts is a vector contains Serializable Object class.
How do you resolve this?
<Nov 14, 2002 2:36:27 PM ICT> <Error> <HTTP> <101019> <[ServletContext(id=553030
0,name=EAIService,context-path=/EAIService)] Servlet failed with IOException
java.rmi.RemoteException: web service invoke failed; nested exception
is:
javax.xml.soap.SOAPException: failed to deserialize xml:weblogic.xml.sch
ema.binding.DeserializationException: did not find needed xsi:type attribute
on
element <anyType>
javax.xml.soap.SOAPException: failed to deserialize xml:weblogic.xml.schema.bind
ing.DeserializationException: did not find needed xsi:type attribute
on element
<anyType>
at weblogic.webservice.core.DefaultPart.toJava(DefaultPart.java:296)
at weblogic.webservice.core.DefaultMessage.toJava(DefaultMessage.java:35
9)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:465)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav -
What's wrong of these code?
i have a mysql database exbtn: id, name, text, value, and php file "getExbtnByID"
i want put a name in a label's text, so...
<fx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.events.FlexEvent;
protected function label2_creationCompleteHandler(event:FlexEvent):void
getExbtnByIDResult.token = exbtnService.getExbtnByID("exBtn02"); //"exBtn02" is the name of table exbtn
]]>
</fx:Script>
<fx:Declarations>
<s:CallResponder id="getExbtnByIDResult"/>
<exbtnservice:ExbtnService id="exbtnService" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
</fx:Declarations>
<s:Label x="214" y="195" text="{getExbtnByIDResult.lastResult.name}" width="448" height="132" id="label2" creationComplete="label2_creationCompleteHandler(event)"/>
</s:WindowedApplication>
but it's wrong, who can tell me why, thanks!!!Error:
Unknown property:“name”。
at mx.collections::ListCollectionView/http://www.adobe.com/2006/actionscript/flash/proxy::getProperty()[E:\dev\4.x\frameworks\pr ojects\framework\src\mx\collections\ListCollectionView.as:870]
at mx.binding::PropertyWatcher/updateProperty()[E:\dev\4.x\frameworks\projects\framework\src \mx\binding\PropertyWatcher.as:338]
at Function/http://adobe.com/AS3/2006/builtin::apply()
at mx.binding::Watcher/wrapUpdate()[E:\dev\4.x\frameworks\projects\framework\src\mx\binding\ Watcher.as:192]
at mx.binding::PropertyWatcher/updateParent()[E:\dev\4.x\frameworks\projects\framework\src\m x\binding\PropertyWatcher.as:239]
at mx.binding::Watcher/updateChildren()[E:\dev\4.x\frameworks\projects\framework\src\mx\bind ing\Watcher.as:138]
at mx.binding::PropertyWatcher/updateProperty()[E:\dev\4.x\frameworks\projects\framework\src \mx\binding\PropertyWatcher.as:347]
at Function/http://adobe.com/AS3/2006/builtin::apply()
at mx.binding::Watcher/wrapUpdate()[E:\dev\4.x\frameworks\projects\framework\src\mx\binding\ Watcher.as:192]
at mx.binding::PropertyWatcher/eventHandler()[E:\dev\4.x\frameworks\projects\framework\src\m x\binding\PropertyWatcher.as:375]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.rpc::CallResponder/set lastResult() -
ReferenceError: Error #1056 - Has anyone come across this error?
ReferenceError: Error #1056: Cannot create property text on spark.components.DataGroup.
at mx.binding::Binding/defaultDestFunc()[E:\dev\trunk\frameworks\projects\framework\src\mx\b inding\Binding.as:270]
at Function/http://adobe.com/AS3/2006/builtin::call()
at mx.binding::Binding/innerExecute()[E:\dev\trunk\frameworks\projects\framework\src\mx\bind ing\Binding.as:473]
at Function/http://adobe.com/AS3/2006/builtin::apply()
at mx.binding::Binding/wrapFunctionCall()[E:\dev\trunk\frameworks\projects\framework\src\mx\ binding\Binding.as:385]
at mx.binding::Binding/execute()[E:\dev\trunk\frameworks\projects\framework\src\mx\binding\B inding.as:321]
at mx.binding::Binding/watcherFired()[E:\dev\trunk\frameworks\projects\framework\src\mx\bind ing\Binding.as:499]
at mx.binding::Watcher/notifyListeners()[E:\dev\trunk\frameworks\projects\framework\src\mx\b inding\Watcher.as:311]
at mx.binding::PropertyWatcher/eventHandler()[E:\dev\trunk\frameworks\projects\framework\src \mx\binding\PropertyWatcher.as:377]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()[E:\dev\trunk\frameworks\projects\framework\src\mx\co re\UIComponent.as:12140]
at spark.components::DataRenderer/set data()[E:\dev\trunk\frameworks\projects\spark\src\spark\components\DataRenderer.as:122]
at spark.components::DataGroup/updateRenderer()[E:\dev\trunk\frameworks\projects\spark\src\s park\components\DataGroup.as:819]
at spark.components::DataGroup/setUpItemRenderer()[E:\dev\trunk\frameworks\projects\spark\sr c\spark\components\DataGroup.as:793]
at spark.components::DataGroup/http://www.adobe.com/2006/flex/mx/internal::itemAdded()[E:\dev\trunk\frameworks\projects\s park\src\spark\components\DataGroup.as:1316]
at spark.components::DataGroup/initializeDataProvider()[E:\dev\trunk\frameworks\projects\spa rk\src\spark\components\DataGroup.as:609]
at spark.components::DataGroup/commitProperties()[E:\dev\trunk\frameworks\projects\spark\src \spark\components\DataGroup.as:722]
at mx.core::UIComponent/validateProperties()[E:\dev\trunk\frameworks\projects\framework\src\ mx\core\UIComponent.as:7684]
at mx.managers::LayoutManager/validateProperties()[E:\dev\trunk\frameworks\projects\framewor k\src\mx\managers\LayoutManager.as:572]
at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\trunk\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:730]
at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\trunk\frameworks\projec ts\framework\src\mx\managers\LayoutManager.as:1069]
This error is generated by the following code in the item renderer:
<s:Label id="owner"
text="{(data.member as MemberVO).name}"
/>
I’ve examines the data provider array collection and from what I can tell, all is as expected!
I'm using Flex 4, nightly build 11921 in Windows XP environmentShankar,
Thanks for the hint but I just discovered that it was the id that I assigned to the Label in s:ItemRenderer that was causing this error. I changed id value from 'owner' to 'owner1' and that took care of that error. If 'owner' is an existing property in the class hierarchy of s:ItemRenderer, shouldn't it give some "Identifier used more than once" type of error?
In any case, I'm closing this case and hopefully someone familiar with this fundamentals of this issue will throw some light on it. -
Query for finding out which components are in use
Hi,
I had a query once to check, if specific components are in use. Theres some internal view but i just can't remember. Can someone help me with this?
EDIT: Damn it wrong board...
Edited by: torgum on Nov 2, 2009 10:51 AMKey binding may vary as you switch between programs. I have some set to be "universal" but some applications manage to override those settings even though the key shortcuts in the application's menu show my programmed shortcuts.
In your case I'd try disabling applications you suspect may potentially be effecting problems and see if you can track down which are affecting your other applications. -
I seem to be having the same problem as mentioned in this thread:
http://bbs.archlinux.org/viewtopic.php?id=58568
and this thread:
http://bbs.archlinux.org/viewtopic.php?id=59229
but to avoid bumping old threads or hijacking said threads I'm posting a new one, as my problem seems to differ slightly. I'm a bit of a Linux n00b at the moment, as this is my first Linux install, so please forgive me if I'm posting a dumb question.
I have tried the solutions offered in both threads repeatedly, however, I haven't been able to get them to work. Most likely, I'm doing something wrong, and I'm assuming that because I seem to have a different setup that I'll have to take a few more steps to solve this problem.
My current setup has Arch running on a windows xp dual boot with the following partitions:
sda1: Windows XP NTFS
sda2: /boot ext3
sda3: extended partition
sda5: / ext3
sda6: /swap swap
sda7: /var ReiserFS
sda8: /usr ext3
sda9: /tmp ext3
sda10:/opt ext3
sda11:/srv ext3
sda12:/home ext3
sda4: /data NTFS (partion shared by both windows and linux for media files and such)
As such, I've had trouble mounting the partitions properly, as per profjim's solution, as I am still learning the system. I first tried his solution verbatim, but the error messages I got in response suggested that I didn't have everything mounted as it repeatedly threw errors about missing files when trying to run pacman. So I tried mounting root and var individally as follows:
mount /dev/sda5 /mnt
mount /dev/sda7 /mnt/var
and then followed the instructions from there with the --bind commands, assuming that I had only mounted root by mistake. Unfotunately, It still threw an error that said /var/cache/pacman/pkg/ didn't exist. Assuming I hadn't mounted it properly, I rebooted and tried mounting and --bind-ing everything individually.
mount /dev/sda5 /mnt
mount /dev/sda7 /mnt/var
mount --bind /var/cache/pacman/pkg
It wouldn't let me --bind them all together with the last line, so I tried it again with:
mount --bind /var/cache/pacman/pkg/
just to be sure, but that didn't work either. I tried the following:
mount --bind / /mnt
mount --bind /var /mnt/var
mount --bind /var/cache /mnt/var/cache
mount --bind /var/cache/pacman /mnt/var/cache/pacman
However, when I tried the last line, it wouldn't let me --bind the pacman folder, saying it didn't exist, so I had to continue with the other commands without --bind-ing /pacman or /pkg.
mount --bind /dev /mnt/dev
mount --bind /proc /mnt/proc
mount --bind /sys /mnt/sys
I then chroot-ed /mnt and ran pacman, but got the same error saying that /var/cache/pacman/pkg/ didn't exist.
I'm at my wit's end. I don't understand why it says my pacman folder doesn't exist, and short of wiping my entire install and starting over from scratch, I don't have the slightest idea what I can do. I really don't want to scrap my install though, as I really want to understand what is causing this and learn how to work with Arch, so I can solve future problems on my own.
Any help would be greatly appreciated.This just keeps getting weirder...I downloaded the ext3 and reiser divers for my windows install and managed to look around my Arch files. The strange thing is that, according to what I'm seeing via windows, I already have the latest ncurses package in my /pacman/pkg folder, and when looking into /user/lib, it says all three of those files are already there. Yet, I still get that error that says it's missing and my Arch install still won't boot. The other thing that's odd, is that windows shows that my copies of libncurses.so and libncures.so.5 are both 1 kb but the ones included in the tar.gz file are both listed at 0 kb. Unfortunately, I can't open either of them up to see what's actually in there.
-
I'm getting "Init: SSL call to NZ function nzos_OpenWallet failed with error 29248" error in log file HTTP_Server~1 while starting OHS (using opmnctl startall).
I created a Wallet with auto login option checked. I was able to create certificate Request and got a certificate from verisign (14 days Validity). I imported Root certificate and intermediate certificate from verisign into the wallet and then successfully imported the trial certificate. After saving the wallet in default location I got 2 files (cwallet.sso and ewallet.p12) there.
Configuration in opmn.xml is :
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<environment>
<variable id="PERL5LIB" value="D:\product\10.1.3\OracleAS_1\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread;$ORACLE_HOME\perl\5.8.3\lib;$ORACLE_HOME\perl\site\5.8.3\lib"/>
<variable id="PHPRC" value="D:\product\10.1.3\OracleAS_1\Apache\Apache\conf"/>
<variable id="PATH"
value="$ORACLE_HOME\Perl\5.8.3\bin\MSWin32-x86-multi-thread" append="true"/>
</environment>
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
my httpd.conf file is as follows:
## httpd.conf -- Apache HTTP server configuration file
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# D:\product\10.1.3\OracleAS_1\Apache\Apache/conf/srm.conf and then D:\product\10.1.3\OracleAS_1\Apache\Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "D:\product\10.1.3\OracleAS_1\Apache\Apache" will be interpreted by the
# server as "D:\product\10.1.3\OracleAS_1\Apache\Apache/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do NOT add a slash at the end of the directory path.
ServerRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# SendBufferSize: controls setsockopt() call made to set send buffer size on
# all sockets. Default OS value on most Windows platforms is too small.
# Larger values can help if the average page size served by OHS is
# large (~64 k)
SendBufferSize 16384
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Apache on Win32 always creates one child process to handle requests. If it
# dies, another child process is created automatically. Within the child
# process multiple threads handle incoming requests. The next two
# directives control the behaviour of the threads and processes.
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For Win32, set this value to zero (unlimited)
# unless advised otherwise.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
ThreadsPerChild 50
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#MinSpareServers 5
#MaxSpareServers 20
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#MaxClients 150
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your Apache
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.dll
LoadModule mime_magic_module modules/ApacheModuleMimeMagic.dll
LoadModule mime_module modules/ApacheModuleMime.dll
LoadModule dbm_auth_module modules/ApacheModuleAuthDBM.dll
LoadModule digest_auth_module modules/ApacheModuleAuthDigest.dll
LoadModule anon_auth_module modules/ApacheModuleAuthAnon.dll
LoadModule cern_meta_module modules/ApacheModuleCERNMeta.dll
LoadModule digest_module modules/ApacheModuleDigest.dll
LoadModule expires_module modules/ApacheModuleExpires.dll
LoadModule headers_module modules/ApacheModuleHeaders.dll
LoadModule proxy_module modules/ApacheModuleProxy.dll
LoadModule speling_module modules/ApacheModuleSpeling.dll
LoadModule status_module modules/ApacheModuleStatus.dll
LoadModule info_module modules/ApacheModuleInfo.dll
LoadModule usertrack_module modules/ApacheModuleUserTrack.dll
LoadModule vhost_alias_module modules/ApacheModuleVhostAlias.dll
LoadModule agent_log_module modules/ApacheModuleLogAgent.dll
LoadModule referer_log_module modules/ApacheModuleLogReferer.dll
LoadModule perl_module modules/ApacheModulePerl.DLL
LoadModule fastcgi_module modules/ApacheModuleFastCGI.dll
LoadModule php4_module modules/ApacheModulePHP4.dll
LoadModule onsint_module modules/ApacheModuleOnsint.dll
LoadModule wchandshake_module modules/ApacheModuleWchandshake.dll
ClearModuleList
AddModule mod_so.c
AddModule mod_onsint.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_negotiation.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
#AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_setenvif.c
AddModule mod_isapi.c
AddModule mod_vhost_alias.c
AddModule mod_log_referer.c
AddModule mod_log_agent.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_digest.c
AddModule mod_cern_meta.c
AddModule mod_digest.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_proxy.c
AddModule mod_speling.c
AddModule mod_info.c
AddModule mod_status.c
AddModule mod_usertrack.c
AddModule mod_perl.c
AddModule mod_fastcgi.c
AddModule mod_php4.c
AddModule mod_wchandshake.c
<IfDefine SSL>
LoadModule ossl_module modules/ApacheModuleOSSL.DLL
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# Port: The port to which the standalone server listens. Certain firewall
# products must be configured before Apache can listen to a specific port.
# Other running httpd servers will also interfere with this port. Disable
# all firewall, security, and other services if you encounter problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
Port 7777
Listen 7777
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName IFLMUD5DLHY4G.i-flex.com
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks MultiViews
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# Under Win32, we do not currently try to determine the home directory of
# a Windows login, so a format such as that below needs to be used. See
# the UserDir documentation for details.
<IfModule mod_userdir.c>
UserDir "D:\product\10.1.3\OracleAS_1\Apache\Apache\users\"
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/error_log 43200"
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# Alternate "common" format to use when fronted by webcache:
# LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
# When webcache is forwarding requests to OHS, %h becomes the IP of
# the originating webcache server and the real client IP is stored
# in the ClientIP header. The common_webcache format can be used
# in place of the common format when using webcache but with one
# important caveat: if clients are capable of bypassing webcache
# then it is possible to spoof the client IP by manually setting
# the ClientIP header so the %h field should be monitored in such
# an environment. Another alternative to specifying the ClientIP
# header directly in a LogFormat is to use the "UseWebCacheIp"
# directive:
# UseWebCacheIp On
# When this is specified, %h is derived internally from the ClientIP
# header and the access log format does not need to be modified.
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
# Note you mustnot_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /icons/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\icons/"
Alias /javacachedocs/ "D:\product\10.1.3\OracleAS_1\javacache\javadoc/"
<IfModule mod_perl.c>
Alias /perl/ "D:\product\10.1.3\OracleAS_1\Apache\Apache/cgi-bin/"
</IfModule>
<Directory "icons">
Options MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin/"
# "D:\product\10.1.3\OracleAS_1\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
# Note, add the option TrackModified to the IndexOptions default list only
# if all indexed directories reside on NTFS volumes. The TrackModified flag
# will report the Last-Modified date to assist caches and proxies to properly
# track directory changes, but it does not work on FAT volumes.
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
AddType application/x-httpd-php .php .phtml
AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost IFLMUD5DLHY4G.i-flex.com IFLMUD5DLHY4G
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
# Required for cgi perl scripts that are run from /cgi-bin/.
SetEnv PERL5LIB "D:\product\10.1.3\OracleAS_1\perl\5.8.3\lib;D:\product\10.1.3\OracleAS_1\perl\site\5.8.3\lib"
<IfModule mod_perl.c>
# Perl Directives
# PerlWarn On
# PerlFreshRestart On
# PerlSetEnv PERL5OPT Tw
# PerlSetEnv PERL5LIB "D:\product\10.1.3\OracleAS_1\perl\5.8.3\lib;D:\product\10.1.3\OracleAS_1\perl\site\5.8.3\lib"
PerlModule Apache
# PerlModule Apache::Status
PerlModule Apache::Registry
# PerlModule Apache::CGI
# PerlModule Apache::DBI
# PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
# <Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from localhost
# </Location>
</IfModule>
#Protect WEB-INF directory
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\fastcgi/"
ScriptAlias /fcgi-bin/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\fcgi-bin/"
<Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
<IfModule mod_ossl.c>
SSLOptions +StdEnvVars
</IfModule>
</Directory>
</IfModule>
# Include the mod_oc4j configuration file
include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\mod_oc4j.conf"
# Include the mod_dms configuration file
include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\dms.conf"
# Loading rewrite_module here so it loads before mod_oc4j
LoadModule rewrite_module modules/ApacheModuleRewrite.dll
# Include the SSL definitions and Virtual Host container
include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\ssl.conf"
# Include the mod_osso configuration file
#include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\mod_osso.conf"
# Include the Oracle configuration file for custom settings
include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\oracle_apache.conf"
my ssl.conf is as follows:
<IfDefine SSL>
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First either `none'
# or `dbm:/path/to/file' for the mechanism to use and
# second the expiring timeout (in seconds).
#SSLSessionCache none
#SSLSessionCache dbm:logs\ssl_scache
#SSLSessionCache shmht:logs\ssl_scache(512000)
SSLSessionCache shmcb:logs\ssl_scache(512000)
# SessionCache Timeout:
# This directive sets the timeout in seconds for the information stored
# in the global/inter-process SSL Session Cache. It can be set as low as
# 15 for testing, but should be set to higher values like 300 in real life.
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual explusion semaphore the
# SSL engine uses internally for inter-process synchronization.
SSLMutex sem
# Logging:
# The home of the dedicated SSL protocol logfile. Errors are
# additionally duplicated in the general error log file. Put
# this somewhere where it cannot be used for symlink attacks on
# a real server (i.e. somewhere where only root can write).
# Log levels are (ascending order: higher ones include lower ones):
# none, error, warn, info, trace, debug.
SSLLog logs\ssl_engine_log
SSLLogLevel warn
## SSL Virtual Host Context
# NOTE: this value should match the SSL Listen directive set previously in this
# file otherwise your virtual host will not respond to SSL requests.
# Some MIME-types for downloading Certificates and CRLs
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
## SSL Support
## When we also provide SSL we have to listen to the
## standard HTTP port (see above) and to the HTTPS port
# NOTE: if virtual hosts are used and you change a port value below
# from the original value, be sure to update the default port used
# for your virtual hosts as well.
Listen 443
<VirtualHost IFLMUD5DLHY4G.i-flex.com:443>
# General setup for the virtual host
DocumentRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs"
ServerName IFLMUD5DLHY4G.i-flex.com
#ServerAdmin [email protected]
ErrorLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/error_log 43200"
TransferLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/access_log 43200"
Port 443
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
SSLCipherSuite ALL:!ADH:!EXPORT56:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
# Server Wallet:
# The server wallet contains the server's certificate, private key
# and trusted certificates. Set SSLWallet at the wallet directory
# using the syntax: file:<path-to-wallet-directory>
SSLWallet D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\ssl.wlt\default\ewallet.p12
#SSLWalletPassword iflex2007
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath conf\ssl.crl
#SSLCARevocationFile conf\ssl.crl\ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional and require
SSLVerifyClient optional
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions FakeBasicAuth ExportCertData CompatEnvVars StrictRequire
<Files ~ "\.(cgi|shtml)$">
SSLOptions +StdEnvVars
</Files>
<Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin">
SSLOptions +StdEnvVars
</Directory>
SetEnvIf User-Agent "MSIE" nokeepalive ssl-unclean-shutdown
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/ssl_request_log 43200" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
</IfDefine>
Please help me rectifying this error.
Thanks a lot in advance.Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V. -
Hi,
I've used the default PHP installation on OSX with no problems in the past (after uncommenting the 2 lines in httpd and enabling Personal Web Sharing), but after a recent reinstallation of the operating system (having re-updated all software) PHP refuses to render. HTML files render fine, but when I load up a PHP file, its source is displayed instead of being properly rendered. I like to think I know what I'm doing, but I'm befuddled :/
Any help would be much appreciated.
Here's my httpd.conf, if it helps:
<pre>
## httpd.conf -- Apache HTTP server configuration file
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:<a class="jive-link-external-small" href="http://">http://httpd.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# /private/etc/httpd/srm.conf and then /private/etc/httpd/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
ServerRoot "/usr"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USEFCNTL_SERIALIZEDACCEPT or
# USEFLOCK_SERIALIZEDACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#LockFile "/private/var/run/httpd.lock"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile "/private/var/run/httpd.pid"
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile "/private/var/run/httpd.scoreboard"
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig /private/etc/httpd/srm.conf
#AccessConfig /private/etc/httpd/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
MinSpareServers 5
MaxSpareServers 10
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
StartServers 5
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file http://httpd.apache.org/docs/dso.html for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.so
#LoadModule vhostaliasmodule libexec/httpd/modvhostalias.so
#LoadModule env_module libexec/httpd/mod_env.so
LoadModule configlogmodule libexec/httpd/modlogconfig.so
#LoadModule mimemagicmodule libexec/httpd/modmimemagic.so
LoadModule mime_module libexec/httpd/mod_mime.so
LoadModule negotiation_module libexec/httpd/mod_negotiation.so
#LoadModule status_module libexec/httpd/mod_status.so
#LoadModule info_module libexec/httpd/mod_info.so
LoadModule includes_module libexec/httpd/mod_include.so
LoadModule autoindex_module libexec/httpd/mod_autoindex.so
LoadModule dir_module libexec/httpd/mod_dir.so
LoadModule cgi_module libexec/httpd/mod_cgi.so
LoadModule asis_module libexec/httpd/mod_asis.so
LoadModule imap_module libexec/httpd/mod_imap.so
LoadModule action_module libexec/httpd/mod_actions.so
#LoadModule speling_module libexec/httpd/mod_speling.so
LoadModule userdir_module libexec/httpd/mod_userdir.so
LoadModule alias_module libexec/httpd/mod_alias.so
LoadModule rewrite_module libexec/httpd/mod_rewrite.so
LoadModule access_module libexec/httpd/mod_access.so
LoadModule auth_module libexec/httpd/mod_auth.so
#LoadModule anonauthmodule libexec/httpd/modauthanon.so
#LoadModule dbmauthmodule libexec/httpd/modauthdbm.so
#LoadModule digest_module libexec/httpd/mod_digest.so
#LoadModule proxy_module libexec/httpd/libproxy.so
#LoadModule cernmetamodule libexec/httpd/modcernmeta.so
#LoadModule expires_module libexec/httpd/mod_expires.so
#LoadModule headers_module libexec/httpd/mod_headers.so
#LoadModule usertrack_module libexec/httpd/mod_usertrack.so
LoadModule logforensicmodule libexec/httpd/modlogforensic.so
#LoadModule uniqueidmodule libexec/httpd/moduniqueid.so
LoadModule setenvif_module libexec/httpd/mod_setenvif.so
#LoadModule dav_module libexec/httpd/libdav.so
#LoadModule ssl_module libexec/httpd/libssl.so
#LoadModule perl_module libexec/httpd/libperl.so
LoadModule php4_module libexec/httpd/libphp4.so
LoadModule hfsapplemodule libexec/httpd/modhfsapple.so
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule modvhostalias.c
#AddModule mod_env.c
AddModule modlogconfig.c
#AddModule modmimemagic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
#AddModule mod_status.c
#AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
#AddModule modauthanon.c
#AddModule modauthdbm.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule modcernmeta.c
#AddModule mod_expires.c
#AddModule mod_headers.c
#AddModule mod_usertrack.c
AddModule modlogforensic.c
#AddModule moduniqueid.c
AddModule mod_so.c
AddModule mod_setenvif.c
#AddModule mod_dav.c
#AddModule mod_ssl.c
#AddModule mod_perl.c
AddModule mod_php4.c
AddModule modhfsapple.c
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
Port 80
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group "#-1" on these systems!
User nobody
Group nobody
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
#ServerName new.host.name
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/Users/borischerny/Sites"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/Users/borischerny/Sites">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
Order allow,deny
Deny from all
Satisfy All
</Files>
# Apple specific filesystem protection.
<Files "rsrc">
Order allow,deny
Deny from all
Satisfy All
</Files>
<Directory ~ ".*\.\.namedfork">
Order allow,deny
Deny from all
Satisfy All
</Directory>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig /private/etc/httpd/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The modmimemagic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# modmimemagic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include modmimemagic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule modmimemagic.c>
MIMEMagicFile /private/etc/httpd/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/private/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "/private/var/log/httpd/access_log" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog "/private/var/log/httpd/referer_log" referer
#CustomLog "/private/var/log/httpd/agent_log" agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/private/var/log/httpd/access_log" combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
# EBCDICConvertByType On=InOut text/* message/* multipart/*
# EBCDICConvertByType On=In application/x-www-form-urlencoded
# EBCDICConvertByType On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut /
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
Alias /icons/ "/usr/share/httpd/icons/"
<Directory "/usr/share/httpd/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This Alias will project the on-line documentation tree under /manual/
# even if you change the DocumentRoot. Comment it if you don't want to
# provide access to the on-line documentation.
Alias /manual/ "/Library/WebServer/Documents/manual/"
<Directory "/Library/WebServer/Documents/manual">
Options Indexes FollowSymlinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/"
# "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/Library/WebServer/CGI-Executables">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbreviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .sv
AddLanguage cs .cz .cs
AddLanguage ru .ru
AddLanguage zh-TW .zh-tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#AddType application/x-compress .Z
#AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other-server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your-domain.com" to match your domain to enable.
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phfabuselog.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phfabuselog.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "/private/var/run/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a-domain.com another-domain.edu joes.garage-sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *:80
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *:80>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
</pre>sorry i forgot that... i use php5 so i guessed at the module name... upon looking closer at the conf its mod_php4.c
<pre>
<IfModule mod_php4.c>
AddType application/x-httpd-php .php
</IfModule>
</pre>
Maybe you are looking for
-
I looked around and saw that some are having trouble with their right speakers but my problem is that my volume goes down randomly to where it sounds sort of like it is underwater and very quiet and then all at once it will shoot back up to clear sou
-
hello i have an isue with ADS. My problem is: i want to create a reference to my table (for example tables name is TAB1) which i am passing via report to PDF form. For example i want to increase index each time when "Top of next content Area" is trig
-
Feature 'nested external environment calls' not implemented
Hi. I've created a .Net 3.5 DLL which is called by a stored procedure using CLR in a trigger. Inside one of the functions I've got an update-statement against the same table as the trigger which calls the CLR code. That update results in a SAExeption
-
Message no. RSO296 - unable to activate update rules
Object CRD4VK18Q4S6OQ2Y6IYRRL7WV (Update Rules) could not be collected for object () Message no. RSO296 Diagnosis You have collected objects in the BW Metadata Repository. Associated objects for the object of type have also been collected. Object
-
Lost all previous Word for Mac files
Does anyone have any contact info for microsoft word (2004) for imac? Recently lost all old word files, however, it has remembered the last 2 docs. In addition, it stopped listing 'Documents' as a option in Applications -where it was previously along