Neue Upgrade von iOS 10.9.5

Nach den Upgrade von iOS 10.9.5, woltte meiner mac weder hoch noch herunter fahren. Nach einen Tag ausgeschaltet, kam er wieder Hoch mit vielen Fehlern.
Angeschlossene HD:s wurde willkürlich unmountet und wieder mountet. Jeder Programm führung ist unmöglich wegen andauernd kommender Fehlermeldung:
Fehler Information:
Das eingelegte Medium konnte von diesem Computer nicht gelesen werden.
Initialisieren
Ignorieren
Auswerfen
Stop Error 9006
Diese Meldung stoppt alle Programm Führungen und arbeiten ist damit unmöglich. Dieses Fehler kommt immer in fünfer Blogs und andauernd.
Ist es möglich zu ältere, vorheriger iOS zu rück zu gehen?

Nach den Upgrade von iOS 10.9.5, woltte meiner mac weder hoch noch herunter fahren. Nach einen Tag ausgeschaltet, kam er wieder Hoch mit vielen Fehlern.
Angeschlossene HD:s wurde willkürlich unmountet und wieder mountet. Jeder Programm führung ist unmöglich wegen andauernd kommender Fehlermeldung:
Fehler Information:
Das eingelegte Medium konnte von diesem Computer nicht gelesen werden.
Initialisieren
Ignorieren
Auswerfen
Stop Error 9006
Diese Meldung stoppt alle Programm Führungen und arbeiten ist damit unmöglich. Dieses Fehler kommt immer in fünfer Blogs und andauernd.
Ist es möglich zu ältere, vorheriger iOS zu rück zu gehen?

Similar Messages

  • Ich habe ein Upgrade von Elements 8 auf 13 vorgenommen. Dabei wurden meine Alben nicht übernommen. Was kann ich tun, um nicht viele tausend Fotos neu zuordnene zu müssen?

    Ich habe ein Upgrade von Elements 8 auf 13 vorgenommen. Dabei wurden meine Alben nicht übernommen. Was kann ich tun, um nicht viele tausend Fotos neu zuordnene zu müssen?

    This should help:
    Use Backup, Restore to move catalog | Organizer | Elements 6 or later

  • Mobiles datennetzwerk geht nach Upgrade auf IOS 5 nicht mehr

    Hi,
    nach dem Upgrade auf iOS 5 geht plötzlich meine mobiles Datennetzwerk nicht mehr. Habe eine aon Sim Karte (mit der es bis dato keinerlei Problem gab) und sehe auch, dass ich 3G zur Verfügung habe. Auch die APN Einstellung sind die gleichen wie vorher...
    Hat jemand eine Idee dazu?
    Danke!

    Hallo @dozeidle,
    hatte bis eben genau das gleiche Problem. Hoffe es bleibt beim "hatte".
    Nach dem IOS 6.1 Update wurde es täglich schlimmer mit der WLAN-Verbindung. Zuerst ging es noch, dann kamen Verbindungsunterbrechungen und die wurden permanent häufiger. Zeitweise musste ich erst das mobile Netz dazu schalten, dann ging WLAN für kurze Zeit wieder bis es wieder zusammenbrach. Bin fast verzweifelt. Und seit heute ging absolut nichts mehr. Hab dann ewig gesucht und war schon enttäuscht, dass ich hier auf deine Frage niemand meldete.
    Meines Erachtens könnte es damit zusammenhängen, dass das Gerät ja die Daten zu den ihm bekannten Netzwerken sozusagen für uns Nutzer nicht mehr sichtbar verschluckt und man da auch nichts mehr überprüfen kann, ob sich was verstellt hat, was ich auch als absoluten Mangel beurteile, denn es sammeln sich so doch so manche nur temporär genutzte Zugänge an, die da nicht hingehören. Unmittelbar nach dem IOS-Update waren bei mir, und wie ich weiß auch bei Anderen, auch die Daten zum mobilen Netzzugang verschwunden und mussten neu eingegeben werden.
    Also hab ich die Daten im Router für das WLAN geändert und anschließend mein 3GS mit diesem sozusagen für ihn neuen WLAN bekannt gemacht, also ein "Anderes" Netzwerk eingeben können. Zuvor hatte ich vergeblich versucht nur den Schlüssel im alten Netzwerk neu einzugeben, aber da machte das Gerät sich permanent selbständig. Ich dachte schon fast ich sei zu blöd dazu. Bis ich darauf gekommen bin und es hat geklappt. Nun hoffe ich natürlich, dass es bleibt und ich das Gerät wieder sinnvoll nutzen kann.
    Vielleicht nützt dir das ja auch. Würde mich auch interessieren, ob es bei dir auch geklappt hat.
    Viel Erfolg.

  • Ich habe ein Upgrade von Fireworks CS5 gekauft. Zur Installation wird Fw CS4 benötigt.  ( CS4 Webstandard ist bei Adobe registriert. ) Wenn CS4 durch die CS5 Software nicht erkannt bzw. gefunden wird, kann man auch die Seriennummer manuell eingeben. Leide

    Ich habe ein Upgrade von Fireworks CS5 gekauft. Zur Installation wird Fw CS4 benötigt.  ( CS4 Webstandard ist bei Adobe registriert. ) Wenn CS4 durch die CS5 Software nicht erkannt bzw. gefunden wird, kann man auch die Seriennummer manuell eingeben. Leider ist die Original-DVD von Fw CS4 abhanden gekommen. Ich kann also keine Seriennummer eingeben, es sei denn,  Adobe hilft indem eine neue Nummer vergeben wird. Allerdings finde ich im Netz keine entsprechende "Anlaufstelle" . Wer hilft mir ?

    Ich frage mich auch, woher Du diese Programmversion erworben hast. CS4 kann schon seit einigen Jahren nicht mehr legal vertrieben werden. Es ist eine Altversion, bei der Adobe auch keine Unterstützung mehr anbietet, schon gar nicht, wenn die Software auf offensichtlich dubiosen Weg erworben wurde. Du hast einfach Geld verbrannt, in ein Programm, das nicht einmal mehr weiter entwickelt wird, in tote Software.

  • Just upgraded to iOS 7 and messages are showing up on multiple phones within our family.  We all use the same iCloud account. I believe this happened the last time there was a major iOS upgrade but I can't remember what the fix was!  Help!

    The four members of my family just upgraded to iOS 7 last night.  We now find that we are receiving each other's text messages.  It's possible that during the installs, a few members may not have "unckecked" the multiple phone numbers they can be reached on.  I know that I had to uncheck my husbands work mobile number and work email address as they came up as choices for contacting me.  So now I am receiving some of my daughter's text messages on my phone - she's not impressed!  My husband is receiving my texts etc...  It's a mess!  I appreciate any help anyone can offer!

    I had this problem last night as well.  Only my daughter upgraded to iOS7 and she had an old phone of mine.  When she upgraded, the phone asked for my apple ID and then continued as normal.  However, after the upgrade, any text message that I recieved, she also recieved.  I am pretty sure my wife thought I was hammered when she started texting me and my daughter began answering her not having any clue what she was texting about.  Anyway, this only occurred with texts from other family members, not from texts I received from friends who are obviously not on our account (we have Verizon BTW).  To resolve this issue, and it isn't a short resolution.... there are two options...   One, simply erase everyting on the phone.... I don't like iTunes 11, so we were unable to back up her phone.  I made her go through her 600 photos, delete the ones she didn't want and email the ones she wanted to herself, and then we wiped the phone clean and rebooted it... go into Settings, General, Reset, Erase All Content and Settings.  The second option, if you have iTunes 11 is to back up the phones one at a time,  and then go into Settings, General, Reset, Erase All Content and Settings.  Either of these options wipes the phone clean of all information, text contacts pictures etc and then you have to re-enter all of your individual information.  When you do that, make sure that no one is on the same iTunes account.  Theoretically, after you do this, you plug back into your computer and SYNC your phone from the last back-up.  This resolved the problem for us.  I don't know if there is an easier solution, be we tried logging in and out of our iTunes Accounts, turning the power on and off, and nothing changed.  So, we had to go the more difficult route to avoid mass confusion with family texting.

  • After upgrade to IOS 8.3  iPad Air no longer connects to iTunes

    Today I upgraded my Macbook Air to Yosemite 10.3 and my iPad Air to IOS 8.3
    After upgrading the iPad I was asked to connect it via cable to iTunes in order to allow for wireless sync.
    When plugging the cable in, the iPad starts sending endless alert beeps and the top line of the screen is shaking. On iTunes the error message "iTunes could not connect to this iPhone. This device is no longer connected." appears with every alert beep from the iPAD. No matter how often the OK button is pressed, the message appears rightaway again.
    I made a full backup of the iPad Air before upgrading to IOS 8.3 but I am very reluctant to reset the iPad as the same error might come up when connecting the iPad after reset to iTunes and then I would not be able to restore it at all.
    Does anyone had a similar experience and/or is there any known workaround?
    Many Thanks for any suggestion.
    G.W

    Thanks for your further consideration, much apreciated. I tried a different cable, different port and did reboot and soft reset. I also did reset of settings on iPad, just in case.
    As  I can with no problems use the same USB cable and USB port with my iPhone to connect to iTunes, the issue must be somewhat with the iPad Air and iTunes on my Macbook Air. I also can connect the iPad with the same USB Cable to iTunes on a different Macbook with no issues.
    I think, best is to do a full backup on a different machine and then setting back the iPad to initial state, followed by a restore.
    This I can (hopefully successfully) do with iTunes on a different Macbook.
    Many thanks for you kind support.

  • Iphone 4 since upgrade to ios 5.1.1 no longer works with made for itunes, iphone devices.

    Ever since I upgraded to IOS 5.1.1 my Iphone no longer works for playing music thorugh my Apline car unit, My Logic 3 clock radio, and a Next made for ipod device.
    I can sync through ITunes on the PC and can also play videos through the HDMI adapter.   My wifes iphone 4s and the kids  hand me down iphone 3s still play fine through these made for Itunes , Ipod , Iphone devices.
    I want to downgrade back to the prior IOS  I had before Apple encouraged me to install this bugged one.   How do I go about getting a legit non jailbroken prior IOS version installed on my Iphone?
    Is Apple aware of this issue , as I have seen blogs about this it is affecting other people?   Will this issue be resolved with ios 6?
    Can I get the beta ?
    Thanks,
    Douglas

    Agreed. Same thing here. Just bought a late model Alpine INE-S920Hd and it is all kinds of broken. I think this is happening because Apple shifted the music and video. Totally buggy. Bluetooth refuses to work properly, too. A2dp keeps stealing the audio from Pandora in the Alpine interface. The ipod controls dont work at all.

  • Since upgrade to iOS 7 Email error on over 100KB emails "Cannot Send Mail  The message was rejected by the server because it is too large." Connecting to Exchange via Activesync

    Hi,
    Following the upgrade to iOS 7.0.3 on all our iPhone and iPad devices, it has been identified that when sending emails around 100KB in size and over an error message appears on the device stating “Cannot Send Mail  The message was rejected by the server because it is too large.” See error message below. The send/receive limit is over 10MB so this is not the issue.
    We are in an Exchange Environment using Microsoft Activesync. This issue is not evident in iOS 6. This has been tested on an iPhone 3GS running version iOS 6.1.3. We have been unable to repeat the issues seen on iOS 7 on the older OS. It is not possible to roll back to the older operating system as Apple are no longer signing the software.
    We use Microsoft Active Sync to connect to our Exchange servers through a TMG. The issue is very inconsistent, some identical emails go through, some fail. This is not an issue with the send/receive limit as this is over 10MB. The error message when it fails on the TMG is Status: 413 Request Entity Too Large, which we believe is from IIS on the CAS server.
    Does anyone have any suggest course of actions to take?
    Many Thanks

    This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

  • HT201077 Since upgrading to IOS 7'photos taken on my iPhone are not transferring to the cloud. Sometimes a few will up load but then nothing for weeks. Anyone else had this problem

    Since upgrading to IOS 7 the photographs I take on my iPhone 4S do not transfer to the cloud. Sometimes one or two of them transfer but then none for weeks. I have deleted photos from the cloud in case it is full but to no affect. I use my iPhone in conjunction with an iPad so this is driving me mad. Anyone else have this problem?

    No you're not the only one having this problem in fact many people are having it I spoke to Apple support today about it. First it is my opinion the aspect ratio is different on iPhone 4s compared to iPhone 5s, however I really feel it is a software issue. Just to make sure I am having the same problem you are I will describe my issue. I Have confirmed the following: if I Center an object on my iPhone 4s screen and open the picture while I am still in the app (open on the bottom left it)looks fine. But when I open camera roll and open that particular picture it's also fine
    Until I scroll left or right it pulls the image to the left side appearing to cut off the left side of the image. After talking to Apple support today and my knowledge with Apple products I strongly suspect this is a software issue. Apple asked me to do a restore as a new phone but I'm not going to go through all that nonsense when I believe it's a software issue and not a hardware issue. So again to recap to answer your question you're not alone, theses sort of things are expected when they rollout a new iOS just hang in there and let's see if they put a patch out for next update.

  • Voice memo missing on iphone 4s after upgrade to ios 7

    voice memo app is missing on my iphone 4s after upgrading to ios 7. any ideas?

    Miracle!!!!!!
    The iOS 7.1 update solved the WIFI issues on my iphone.
    I'll try to upgrade my ipad later on and then
    I think I can sell my hairdryer and my freezer.
    Thanks to the people @ infinite loop ;-)

  • Caller id not working after upgrade to IOS 8.

    I have an iPhone 5 which I upgraded to IOS 8.  After the upgrade the caller id does not shows the person's name (which I have on my Contacts) on the screen.  Now I installed IOS 8.1.1 but the problem persists.  This happens also on an iPhone 5S from my office.
    Any recommendations?

    Do not pay attention to the previous comment.  Sometimes names are shown for numbers stored in IOS address book or Exchange and sometimes (most of the time) not.

  • Cannot backup iPhone 3GS to my computer after upgrading to IOS 5.0 due to "corrupt backup file"

    How do I sync my 3GS to my computer after upgrading to IOS 5.0.1 and getting message "corrupt backup file, delete and retry"?

    Some Users have reported that a Restore has Resolved Issues after the Upgrade...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • IPad app no long works after upgrading to iOS 7.1.1

    iPad app no long works after upgrading to iOS 7.1.1

    Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

  • How to upgrade to iOS 8.1 on original iPAD

    I have an original iPad.  The current OS is 5.1.1.  When I try to upgrade using the latest version of iTunes on my PC using the "Check for Update" function, it says that "the version of the iPad software (5.1.1) is the current version" and doesn't offer me to upgrade.  Is it possible to ugrade to iOS 8 on the original iPad?

    asmith_ru wrote:
    Is it possible to ugrade to iOS 8 on the original iPad?
    No, it is only possible to upgrade to iOS 5.1.1 on the original iPad.

  • Unable to play some movie from Netflix on my iPad. When I click on a movie an error message comes up which says "cannot play movie. Please try again". Can anyone assist me? I just upgraded to iOS 7.1. Netflix not able to find problem.

    Unable to play some movies from Netflix on my iPad. When I click on a movie an error message comes up "Cannot play movie. Please try again later." I contacted Netflix but have not been able the help so I am wondering if it's my iPad. I didn't have a problem before but I have recently upgraded to iOS 7.1. Also is a certain amount of storage needed to play a movie? About how much is that?

    Hello all,
    I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
    So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
    So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
    Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
    Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

Maybe you are looking for

  • Surface Pro 3 Type Cover Scrolling Behavior

    I asked the same question in the surface comminity forum, and the support engineer suggested that I relay my question here. I've just purchased a surface pro 3 with type cover. It's a great machine and I use it for web developement projects on the go

  • File to File scenario is not working

    Hi I have done simple file to file scenario. I have done all the necessary cofigurations but XI is not picking the file I have checked in adapter monitoring its saying "File Adapter monitoring is now part of Channel Communication"  its not showing an

  • DVD Supported Formats for T61p (6459)

    What DVD formats are compatible with the T61p (6459)? Thank you, Paul

  • Raw files from my EOS T3i. My computer has Windows 7 - 64 bit.

    I want to use Raw files from my EOS Rebel T3i. When I went to down load the Canon driver to convert this it turns out there is no driver for my computer's operaing syste. I have a pretty normal computer with Windows 7- 64bit. They only support 33 bit

  • Will iMac 3.4 i7 run Photoshop much quicker than 2.26 8-core Mac Pro

    Hi, I'm thinking of reducing the footprint of my kit and replacing my 2.26 8-core MP & Display with a new iMac 27 3.4 When running Photoshop CS5, does this i7 offer a good performance improvement over my MP? (RAM would be 16GB in both cases) I'm assu