Neuratron's Photoscope prevents Paper Capture from working

I have been using Acrobat 9 Professional for some time without any problems. I installed Sibelius5 with Neuratron's Photoscope a few weeks ago and Paper Capture simply stopped working. I tried repairing the installation, and finally uninstalled Acrobat and re-installed it to no avail. I have spent literally hours trying to fix this problem.
I finally did a search here on the Acrobat forums and found the post: http://forums.adobe.com/message/1178373#1178373
I found a copy of the Paper Capture driver drs832.dll located here: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PaperCapture and copied over the ******* version that Photoscope dumped in C:\Windows\System32. Now my Acrobat Paper Capture applications work perfectly once more.
I just wanted to share and prevent anyone from going through what I've gone through.
Acrobat ERROR Message encountered:
"Acrobat could not access the recognition service because: Unable to locate the Paper Capture recognition service. Your installation may be corrupt. This is probably due to either a low memory situation or a corrupt installation. If the problem is not clears up by shutting down other applications and/or rebooting, then please re-install Acrobat. Acrobat could not perform recognition (OCR) on this page because:"

Thanks for sharing.

Similar Messages

100% thread pool/CPU usage prevent MII Applications from working

Hello to all,
our MII Applications were running on MII 11.5 (windowsserver 2003, with IIS) without any problems.
We migrated these MII Applications to SAP xMII Version 12.0 SP8, SAP NW 7.00 SP20, Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_22-rev-b03, mixed mode).
Since then we faced several problems that prevent the MII Applications from working, e.g.
- 100% application thread pool usage rate
- 100% CPU usage
- awful lot of http connections
Several sap support calls didn't find the root cause.
Workaround: restart sap system weekly
Does anyone has any idea how to go on?
Thanks
Simone

Hi Mike,
sap support told us to install this Java version.
Furthermore SAP Note 716604 says "do not use J2SE 5.0" and "Currently, we recommend 1.4.2_24 b06".
Any more ideas?
Regards,
Simone

Software that prevents key combinations from working

Under OSX 10.4.7 the key combination "shift + l" does not produce "L" on my iMac. Everything else seems fine including lower case L. If I start the iMac from the OS software installation disk (OSX 10.4.4) or startup in Windows XP using Boot Camp or start OSX in "safe mode" then "shift + l" does produce "L".
Also, I have an eMac (also OSX 10.4.7) for which the key combination "shift + /" does not produce "?". If I startup in "safe mode", "shift + /" does produce "?".
I have never installed any software for setting "hotkeys". How do I identify what software on my hard drives is preventing these key combinations from working?
iMac Intel Mac OS X (10.4.7) regular Apple keyboard

Sorry about posting in "iMac G5". I have no idea how I failed to get it in the Intel iMac forum.
I used the "Activity Monitor" utility to see what was different between "safe mode" and my regular startup. I noticed that the "Speech synthesis server" was one difference. I found the "Speak selected text when the key is pressed" option in the preferences pane for "Speech". That was the problem.
It would be nice if there was a warning message that said, "You will not be able to type '?' if you assign that key combination to Speech."

BBLink account is preventing priority hub from working for emails

The priority hub on my phone was working fine when I got my Q10 a couple months ago. Somewhere along the way it stopped working, but just for my email accounts--BBM, text, twitter, etc, kept working. I have spent some time trying to figure out why this happened, reading forum posts here and such with no luck.
In the end I settled for making some manual rules that mimicked the priority hub behavour. It was a pain, but it worked.
Then I had a seperate issue when adding a new email account, where my outlook contacts kept duplicating on my phone. In the end, I fixed this by removing accounts I wasn't using on the phone (mainly the bblink one), and deleting all my local contacts phone information, then readding the outlook account. This stopped the outlook duplicates from being created.
But low and behond, my priority hub started working again for emails. Which was great. But then a few days later, it stopped working again.
I figured out it happened when I plugged my phone into my computer to back it up. At this point the "bblink" account was made on my phone again. Then the priority hub stopped working for emails again.
Deleting the "bblink" account once again fixed the priority hub issue.
It's not a big deal, I can just delete this "bblink" account every time I back up my phone. But I have the Link program on my computer set to not sync or auto start anything. I just plug in the phone, run the backup, and unplug it.
So I'm just wondering if anyone knows what is going on here, or has experienced something similar.

Tom-Zom-W wrote:
So if I have all the options in Link already turned off, any idea how I can run a backup yet prevent Link from syncing.
Also, is this BBLink account common to blackberry 10 devices? I checked a friends BB, he didn't have the account and also uses Link for backups.
Check your Link set for contacts and calendar and turn that off.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Passcode Lock prevents Apple Configurator from working

We have over 2,000 Supervised iPads in our district. We would like the students to Passcode Lock their iPads to deter other students from messing with the iPads.
Once the Passcode Lock is set, Apple Configurator no longer works :-(
Cannot Update/Install Apps
Cannot Remove/Install Profiles
Cannot Restore from Backup
etc
Must type in the Passcode and Supervise while logged in (which prevents us from closing the lid, plugging in the iPad into the Bretford carts). Once the lid is closed, the passcode lock is activated again. This is a ROYAL PAIN!
Also, if the teacher is not aware of what the student Passcode is, there is no way of updating the iPad. Multiply this by 2,000 and you can see how much of a pain this is.
Apple Configurator should be able to work with Supervised iOS devices that are passcode locked. It just makes sense. IF the iOS device is Supervised by Apple Configurator, the Passcode Lock should NOT prevent further management by Apple Configurator.
Apple, PLEASE FIX IT

You should leave feedbacke here:
http://www.apple.com/feedback/

New Tab script error prevents other functions from working. How do I remove "New Tab" content (sponsored links, etc)?

I actually found the settings for it in the top right corner of the page, but figured I'd report it anyway.
Basically, the New Tab Tiles have been causing script errors (prompt to stop script) that disable a few navigation controls, like being able to close a tab. Any tab that is open or opened after the script error will not close. I have to restart Firefox for the controls to start working again. I have found that the tiles that have been causing the problems are the one's that Firefox provides, as it still happens when my internet history is clear and not loading any tiles from my history.
It doesn't happen every time, but it does happen regularly. I just changed my settings from "enhanced" to "classic" and will see if this helps, otherwise I will just turn it to blank if its still an issue.

If it does happen there are other add ons that block scripts like No Script.
However for script errors, general troubleshooting can be found: [[Warning Unresponsive script - What it means and how to fix it]]

CF10 Sandbox Security prevents CFCOLLECTION create from working

Hello, everyone,
I've got CF10 installed on my dev system. I've created several Solr collections. I have turned on Sandbox Security, and added defined directory permissions for C:/ColdFusion10/cfusion/collections and C:/ColdFusion10/cfusion/jetty folders. I have edited both paths so that NOTHING is disabled.
If Sandbox is on and I remove a collection from within CFAdmin, when I try to use the CFCOLLECTION action="create" tag, I get java.io.filePermission "read" access denied messages.
If I turn off Sandbox, the tag runs fine.
What else do I need to do in order for CFCOLLECTION action="create" to work while Sandbox is on?
V/r,
^_^

Hi, Charlie! Thanks for chiming in. (Also, sorry for delay in responding..)
Yes, when the collection is created in CFAdmin, the collection IS creating the folders in C:\ColdFusion10\cfusion\collections.
When I create them with CFCOLLECTION, I am specifying the same path to the collections folder.
For the Sandbox, CF10 installs with three items in the Sandbox, already:
(ColdFusion WEB-INF system directory)
(ColdFusion CFIDE system directory)
C:/ColdFusion10/cfusion/wwwroot/
I have added to this list:
C:/ColdFusion10/cfusion/jetty/
C:/ColdFusion10/cfusion/collections/
For each of the two I added, I edited them both:
Data Sources - ALL DATASOURCES enabled
CF Tags - All tags enabled, none disabled
CF Functions - All functions enabled, none disabled
Files/Dirs - Each path (with two entries, each: / and /-) set for Read, Write, Delete
Server/Ports - ALL IP:ports are open, no restrictions
Others - ALL runtimes enabled, none disabled
I have gone in to look at the settings for wwwroot. With one exception, it is identical to the above. That one exception is that all runtimes (under Others) are disabled, none enabled.
V/r,
^_^

OCR Paper Capture not working.

Hello,
I am trying to use the local OCR scan and I am having issues getting it work. This is on Acrobat 9 Standard.
It was working fine, and I can not think of any software that was installed that would effect this plug in. Here is a image of the exact message I get. http://i.imgur.com/J9dZg.jpg
What I have done
I have followed the KB article, http://kb2.adobe.com/cps/402/kb402063.html - No success
I have repaired, then completely removed and reinstalled the program.
I have tried to rebuild/relink the dll using regsvr32 but no luck
The PaperCapture plugin is running but when I tried to use it, it fails with message above.
I do have a Fujutsu SnapScanner and I understand that can complicate things, but it was installed previously and worked fine.
Anyone have an idea what I can do to get this function working again?

Thank you for the tip, I will try scanning from a TIFF.
And the Scansnap may be unsupported with Acrobat, but I support an office of 60 people who all have a ScanSnap and run OCR scans with no problem.
The problem also occurs when I scan from our Keyocera Mita.

When I installed adobes update the other day, this prevents my Mozilla from working at all. Please assist. Thanks.

This was the first time I have had a problem with Mozilla. I do not like MS Explorer.

Hello pizzaman7, is Firefox crashing when you're opening it? If so, please perform the following steps in order to give us a crash report ID that helps us find out more about the cause of the crash.
#Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
#In that text field, enter %APPDATA% and press Enter. An explorer window should open.
#From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
#Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
#Open the most recent 5 files with a text editor and copy the IDs.
#Paste each ID into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

ITUNES prevents optical drives from working on Vista

When ITUNES is installed and computer is restarted, the functionality of the optical drives is compromised due to the filter ITUNES places on the computer. I know Apple has a doc to fix this feature through the REGEDIT option but I'd rather not take the risk on messing with my Windows Registry. Has there been a patch or other fix for this problem yet? If not, hurry.

Seconded. HURRY!!
This is a pretty major issue people are having if we have to tinker with our registries to get normal performance from our PCs

Prevent multiple users from editing/approving the same form SPD 2013,SP 2013

Hello all, I have a workflow with a to do task, the task is assigned to a group so any of the users in that group can go in and do a quality check on form data and approve it. How do I prevent multiple users from working on the
same form? do I just require check out? or is there a way to notify the rest of the group that a user has already started the quality check.

The "Require Checkout" option is your best bet. You can also enable the auto checkout on edit option to allow minimal effort on the side of the user. Other users will then get the error message stating the item is checked out, if they try to
edit it.
If you'd like, you could add a workflow to the task list that triggers when something is changed. That workflow can check if the item is checked out and if so, email the other users assigned to the task.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Is there a way to prevent a Blackberry SIM from working in other smartphones?

Hi all,
Just a quick question here - we've tested and found that a SIM card with an iPhone/Android data plan on it won't work in Blackberry (at least not the data portion) but is there a way to prevent a card associated with a BES/BIS data plan from working in other Smartphones? The data use is the big issue for us.
I know this should be as simple as telling our users they're forbidden to do so, but... they're users, and we've had a few go a bit rogue...
Thanks
Environment: Bell Mobility, BESX, ActiveSync
Solved!
Go to Solution.

Hi Sparq,
Current BlackBerry smartphones require access to BIS or BES, which requires special data plans, which is why the iPhone/Android data plans don't work, but as far as I know, the same restriction doesn't exist going the other way. Your best bet would be to call your service provider (in your case, Bell?) and see if they have the ability to apply a restriction on their end. That's really the best chance you'd have for blocking them out.
Of course, if it's a serious enough issue, your company's CEO and management team could make it an offense that could result in the termination of a position as it technically could be considered theft of company assests.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

"Lync 2013" error we're sorry, but outlook has run into an error that is preventing it from working

Hi -
So I've an legal Office 2013 version running on my Surface Pro 2, which works fine.
I installed lync client 2013 (not from the appstore, but the desktop version) and on first sight, seems to work as well.
Now comes the issue - when I want to join a meeting, the following error comes up:
"we're sorry, but lync has run into an error that is preventing it from working''
I already re-installed Office and Lync several times - but the error keeps coming and it getting really frustrated because I cannot join any meeting.
Tim

Hi,
Please check if the Lync conference add-in is active in Outlook.
You can check with the following steps:
Click File button on Outlook, Options--Add-Ins. Make sure the Lync Add-in for Microsoft Office 2013 in the list of "Active Application Add-ins". If it is in Inactive Application Add-ins or Disabled Application Add-ins, active it and then restart
Lync client and Outlook to test the issue.
If the issue persists, please also delete Lync user profile and Outlook profile to test the issue.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

When going to my hometown paper's site I get a dropdown banner that says Firefox has prevented this site from reloading ,but when I click on the allow button you have on the banner nothing happens so why is the button there?

When I go to the local paper's from Elmira,NY and some other sites I get a drop down banner at the top of the page that tell me Firefox has prevented this page from reloading,but when I go to the allow button that you put on the right side of the banner and click on it the banner goes away and then it comes right back. It will come back every time you click allow until I click on the x box. So I want to know why is the allow button there if it does nothing?

Click the Firefox button, go to Options | Options | Advanced and in the General tab, remove the checkmark from "'''Warn me when websites try to redirect or reload the page'''".
You won't get that dropdown banner anymore afterwards.

Prevent Hourly Employees from Ordering Non-stocked Materials and Creating Purchase Reqs in Work Order

Our SAP plant maintenance system is configured to create a purchase req when a non-stocked material is ordered. We would like to prevent hourly employees from creating a purchase req or ordering non-stocked materials. Only supervisors should be able to order non-stocked materials and create a purchase req. Is there a way to do this via config or system enhancement?

Hello Rick,
Clearly there will be 2 ways if not more. One is the Authorization object route and another is Enhancement route. I'm not going to touch the former one. So let's expect answers from other members for that. For the later one, we need to know the answer for the question below:
'Can we distinguish the hourly employees from regular employees by the user-Id or some other means? If yes, how ?'
Once we know this, we need to use some user-exit or enhancement spot of the program SAPLCOIH to capture the event of 'N' in the ItemCategory field of Components tab by such UserIds and trigger an error message. (Suitable user-exit is not striking my mind, so this might go the implicit enhancement way of Order program SAPLCOIH ).
KJogeswaraRao

Neuratron's Photoscope prevents Paper Capture from working

Similar Messages

Maybe you are looking for