Never appears after restoring...and doesn't appear to allow reinstall

Hi.
My ipod is a cute little thing but it is not happy. Once before I needed to reinstall it. My colleagues did it for me and then everything was good.
Now...I live far away from anyone with an ipod and I have a poor internet connection. I plugged the ipod in to upload different music (hard drive and I-Tunes on work computer with lan) and although it had been working perfectly Itunes suggested restoring. I accepted. It went through the process and then after the 15 seconds never popped up. The screen went to the apple window, to about 2 seconds of a screen asking about language, and then to "do not disconnect". About 15 seconds later, Itunes again said it had found an ipod in need of restoration. I must have gone through this cycle 25 times in the last week.
When unplugged (only when I shut down as I can't eject), the ipod seems as though it would work, but I can't get music onto it to check.
I did change the drive path to move it from a LAN space...no luck.
I looked up reinstalling but the directions require Itunes to recognise the Ipod, which it only does in time to suggest restoring it. I can't figure out how to do the reinstall, although it worked last time.
Please help - I live in eastern DRC and just bought a Bose speaker thing to allow music in my bedroom. I have tried to buy a new Ipod but they won't send to Kenya or DRC even if I pay insurance...you would be saving my sanity to get this to work again.

nevermind
i forgot the attachment:
btw: "variant" is likely the data type with poorest performance in any language. if you need variable data transfer you should consider to use something like
test(uint8* data, int32 numbytes)
or something like that.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
variant2variant.JPG ‏17 KB

Similar Messages

I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
Have you thought about turning auto syncing off?
Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ...

IPhone 4S will either show 100% battery or dead battery right before shutting off, nothing in between. Has iOS 7 now after restore and is continuing to do the same thing as when it has iOS 6. Frustrating, like not having a fuel gauge on your car!!l

iPhone 4S will either show 100% battery or dead battery right before shutting off, nothing in between. Has iOS 7 now after restore and is continuing to do the same thing as when it has iOS 6. Frustrating, like not having a fuel gauge on your car!!l. Purchased around March of this year so not very old, never wet, damaged, etc.

Read: http://www.forbes.com/sites/larrymagid/2013/09/27/how-to-preserve-battery-life-i n-ios-7/?partner=yahootix

How do i get my pictures back on my iphone after restoring and backing up my iphone

hod do i get my pictures back on my iphone after restoring and backing up my iphone?

Have you ever tried iPubsoft iPhone Backup Extractor? It had good performance when i used it to recover pictures from iPhone!

Iphone 3gs will not activate after restore and update

my sons iphone 3gs will not activate after restore and ios update.
phone keeps saying no service but worked fine before restore and update any ideas ? thanks

Sorry. The jailbreak is undoubtedly the root cause of your problem.
It is not always possible to repair the damage done by jailbreaking.
Try searching google for an answer, but be prepared to just buy a new phone.

Database is pending after restore and recovery

Database is in the pending status after restore and recovery.
The database can not startup today and it shows a error message: the log file 2 cannot be archived. Then I issue the following command:
SQL> select group#, sequence#, bytes, members, status from v$log;
    GROUP# SEQUENCE#      BYTES    MEMBERS STATUS
         1        452   52428800          1 CURRENT
         3        451   52428800          1 INACTIVE
         2        450   52428800          1 INACTIVE
SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
Database altered.
SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 2;
Database altered.
SQL> alter database open;
Database altered.
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 566231040 bytes
Fixed Size                  1220580 bytes
Variable Size             125829148 bytes
Database Buffers          432013312 bytes
Redo Buffers                7168000 bytes
Database mounted.
Database opened.But when I try to login using EM console, it shows the database is not open. Then I restore and recover the database using EM Console. But the database then get into the pending status.
What to do next?

Stop the EM console and then restart it. I expect all is OK then.

I have been given an Apple 3G which is in jailbreak. After restoring and updating my phone will not accept any updates or restoration. Unknown error 1015. Please help!

I have been given an Apple 3G which is in jailbreak. After restoring and updating my phone to get rid of jailbreak the iphone will not accept any updates or restoration. Unknown error 1015. Please help! I am new to all this and want to start using the phone legitimately.

I believe from the situation you describe your iPhone 3g has the iPAD baseband 6.15.00 which is interfering with iTunes. Remember Apple does not allow downgrade of software typically. The current 3g firmware 4.2.1 has a baseband 5.15.04 which is lower than, what I believe your baseband is of 6.15.00. So to install the current 3g firmware 4.2.1 would actually be a baseband downgrade, which iTunes will not allow. So to fix your iPhone you will have to search the Web like diesel vdub said. There are no parts to buy and your iPhone will work again I promise.

HT201263 iphone 3gs will not activate after restore and update?

Please help my iphone 3 gs will not activate after restore and update.

If it is locked to any carrier, insert SIM from the carrier. If it is unlocked insert any SIM to activate.

My ipad2 keep on freezing even after restoration and upgrade to software version5.what do i do?

my ipad2 keep on freezing even after restoration and upgrade to ios5. what do i do?

Simon...
If you restored from a backup, the backup may be corrupted.
Try Restoring as a new device

After restoring and Syncing all APPS status "loading"

After restoring and Syncing my new Iphone with my older Iphone backup, all my apps are in "loading" status, what should I do?

You can try this
With the iPhone plugged into iTunes
Click on the iPhone under device thengo to info
Scroll down to the bottom of the page under advance and check contact, it will say something like
Put the information on this computer, then do apply
Hope it helps
Mike

Can't drag music from iTunes to iPod after restore and sync

I did a restore on my 80 Gb iPod classic because the 'catalog' became disorganized. The restore (from latest iTunes under Win7) and the sync/loading of songs seemed normal. The iPod works completely normally EXCEPT when connected to iTunes. Then, I can no longer drag albums to the iPod and the iPod song display is in grayed text instead of black.
My only theory is that I may have responded to a dialog box during sync which showed my very old and no longer used apple ID. iTunes uses my current ID.
If that IS the case, how do I fix it? Or, what other kinds of things could be wrong?

Probably. I ran in that mode since the thing was new, only changing after restore because sync is the default and when I uncheck sync music there is this ominous dialog box saying that 'not sync' will cause all of the content to be removed (or words to that effect).
I'll mess around a little. The worst thing that could happen is losing this tound and going back to restore!
Thanks
Joe (miniuls)

Error in Check DB after RESTORE and RECOVER

Hi Team,
System was partially restored and recovered due hardware failure.
We had 3 file systems that had to be restored and in one of them we has "/oracle/BWP/sapdata8/temp_2/temp.data2" data file.
After the restore and recovery , the system was up.When ran check DB , the get the below error message and when i checked in DB02 , everytime when trying to see the datafile inside PSAPTEMP , there is a short dump with the same error message listed below.
Database error text........: "ORA-01157: cannot identify/lock data file 256 -
see DBWR trace file#ORA-01110: data file 256:
'/oracle/BWP/sapdata8/temp_2/temp.data2'"
When checked the restore , looks like "oracle/BWP/sapdata8/temp_2/temp.data2'" was not restored.
Kindly help to check how to correct this error. Even my online backup's are failing.

Hello Priyanka,
how did you restore your database?
The temporary files are not included in a backup, because they are not needed for a recovery - that works as designed.
After the recovery you have to add these files again.
If you would have used brrecover for restoring/recovering your database the temporary files would be added automatically.
Check the documentation here:
http://help.sap.com/saphelp_nw70/helpdata/EN/6e/4c37b85dc7f24d88f177396dc45645/content.htm
Now you have to do this manually like this:
shell> sqlplus / as sysdba
SQL> ALTER TABLESPACE PSAPTEMP ADD TEMPFILE '/oracle/BWP/sapdata8/temp_2/temp.data2' REUSE;
Regards
Stefan

Activation issues after restore and OS upgrade

IPAD was disabled. Only option I had was restore. After restore, it offered to upgrade the OS which I accepted. Now, Activating IPAD requires my apple id which is ******@icloud.com. I don't even remember creating any account on icloud.com. I have tried to retrieve it unsuccessfully from Forgot Apple ID link. Any suggestions? workarounds? Many Thanks in advance.

You will not be able to re-activate your iPad if you do not remember the old Apple ID and Password.
This is the new security feature of IOS 7.

How can I get Back all of my data after restoring and back up ? I lost my data and I did back up

when I did restore and update .. I lost all of my data , then I pressed to back up buttom , when I try to restore data , its disapper . is there anyway to get back all data lost ?

If you are backing up to your computer, check iTunes/Edit/Preferences/Devices, if there are nay other backups listed.
Since each backup replaces the old one if not used to restore from, your data might be lost since you seem to have backed up a phone without any personal data.
Check this article about how to restore from backups:
iOS: Back up and restore your iOS device with iCloud or iTunes

HT201274 Facetime is still not working even after restore and all other troubleshooting is performed

Tried restoring and all other troubleshooting and still cannot obtain Facetime on my phone - have others had this problem and if so how di you resolve the problem? Please help.

Which version of Lightroom? Which operating system?

I cannot back up after restored and updated my iPad

First, my iPad2 ran on ios 4.3.3. Then I backed up it and kept its library and setting
Next, I restored and updated to run on ios 5.1.1.
The system (on iPad) asked me to set up as a new one or back up via icould or itune.
I surely chose the last one because of an old ios.
The picture of usb cable and itune figure then shown, so I plugged in with my PC and launched itune programme.
Wonderingly, it didnt have any buttoms which i could back up (plz see the piture below)
Q : What should I do for backing up it into my iPad?
PS : I have already followed this http://www.apple.com/support/ipad/assistant/itunes/#section_7 but it does not help!!!!!!
<E-mail Edited by Host>

Sunbeame wrote:
If it is during the warranty time, can I go to a store and get some help?
That is exactly what I would do with this situation. Like I said I have seen this problem before but I know that I was not able to figure out what the problem was.
Make sure that you are running the latest version of iTunes on your PC - and you could also try uninstalling and reinstalling iTunes to see if that helps. I just don't know if that will work or if that is the reason that you are seeing this.

Never appears after restoring...and doesn't appear to allow reinstall

Similar Messages

Maybe you are looking for