Never Ending Authorize loop
I'm now running into the never ending authorization loop.
I've found the KB Article and have followed all of the steps, but am still not able to get passed it.
I am noticing however that there are some discrepancies, even when I attempt to login to this site.
My Apple ID doesn't follow an e-mail address format [email protected] When I go to authorize however, by default, the system puts in the @xxx.com extension. I remove it and the system tells me that the computer is already authorized.
I'm using Windows7 x64 with iTunes 9.0.2.25 and a 3rd Generation Nano.
I've sent an e-mail in to Apple for guidance, but am looking for any other ideas.
Here is some additional information that I find questionable / lead me to believe that this is a bug in the system.
As I continue to look through the list of files that are "Not Authorized" I find that some of them are files, I didn't purchase through the iTunes store, but rather music that was imported via a CD from my collection.
What's going on Apple?!?!
Similar Messages
-
SOLUTION for the never ending reboot loop when charging
I used my iPad until the battery was completely flat, then when I went to charge it, it got stuck in the never ending reboot loop where it shows the Apple logo for about 30 seconds, then shows the home screen for a split second before shutting down and repeating the whole process again and again.
So here's what you need to do to fix this problem without having to restore or plug into iTunes.
1. Plug in the charger
2. When the Apple logo appears, unplug the charger
3. As soon as you see the home screen appear, plug the charger back in. You need to do this quickly as the home screen only shows for a split second
4. The loading wheel should appear and shut down the iPad
5. Leave the iPad for a good 30mins or so just to get some battery life into before you start using it again.
And that's it!Figured I'd start recording the errors I get in the Installer Log:
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: some files for GarageBandinstrumentsTiger may not have been written correctly.
localhost : BomFileError 0: Unknown error: 0 - ./Instrument Library/Sampler/Sampler Files/Grand Piano/054F#2KM56M.wav
localhost : Install failed: some files for GarageBandinstrumentsTiger may not have been written correctly.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iDVDThemes_Tiger may not have been written correctly.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iWeb_App may not have been written correctly.
localhost : Install failed: Error encountered while writing receipt for iWebtempja.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iWork Trial may not have been written correctly. -
The never ending installation loop - Help!
Dear Apple Forums,
I can honestly say I used to hate apple, but since buying one for university use I've come to love my little MacBook Pro. However, it has recently suffered a massive problem and I've run into a very difficult situation. My macbook pro started giving me problems a couple weeks ago with the mac screen of death ("please restart your computer" in 3 languages) and I attempted to fix it using the mac troubleshooting guide online to no avail. Things only got worse as it took up to 7 attempts to get to the desktop. I finally decided to reformat this bad boy in hopes that whatever was wrong with it would go away.
However, I've run into a major problem with the installation process. It seemed to be running fine through the first Mac OS X install disk, and it asked me to restart my computer, which I attempted when it showed me the screen of death. I just ignored it and continued on by inserting the second disk when prompted. Now I seem to be stuck in an endless loop of installation. I get to about half way through the installation when it tells me there was an error and that I should try installing again. I've attempted to install the second disk about eight times now, and I don't know what I need to do next.
Any help would be greatly appreciated. I live in Maine, and I don't want to have to drive to New Hampshire to fix my precious computer.Figured I'd start recording the errors I get in the Installer Log:
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: some files for GarageBandinstrumentsTiger may not have been written correctly.
localhost : BomFileError 0: Unknown error: 0 - ./Instrument Library/Sampler/Sampler Files/Grand Piano/054F#2KM56M.wav
localhost : Install failed: some files for GarageBandinstrumentsTiger may not have been written correctly.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iDVDThemes_Tiger may not have been written correctly.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iWeb_App may not have been written correctly.
localhost : Install failed: Error encountered while writing receipt for iWebtempja.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iWork Trial may not have been written correctly. -
Safari (and other browsers) go into never ending crash loop
Since I got Lion, by default when you open an application, it remembers its state when it was closed last time. So what happened was my wife went to this malicious websites that opened hundreds of windows automatically and crashed her safari. Now, whenever he opens Safari, it again opens all those window and crashes immediately. There seems to be no way to stop this loop. I tried restarting the machine without checking "reopen windows...." option, but this state-retention is application specific, so Safari itself remembers what to open every time.
This is true to Chrome too.
Then I also notice that when I open a PPT document for example, the first docuemtn it shows is an old one I had. In fact, I don't like seeing half dozen documents opened whenever I want to open just one.
Is there a central way to stop my applications from opening all these documents that were opened while I closed the application last time?
How do I get out of the Safari/Chrome crashing loop?
ThanksHi..
Try this on Safari first...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Safari
Click Go
Move these files from the Safari folder to the Trash.
History.plist
Downloads.plist
LastSession.plist
Quit then relaunch Safari to test. If that didn't help, post a crash report so we can try and find out why Safari is crashing for you.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
Whatever is causing Safari to crash may affect Chrome as well.
edited by: cs -
Fstab to mount/fsck DOS partition results in never-ending boot-loop
Hi,
Last time I restarted my computer, I had added a line to fstab:
/dev/sdc /mnt_usb vfat users,noauto,umask=0000 0 1
/dev/sdc1 /mntc1 vfat users,noauto,umask=0000 0 1
Previously, I had only the first one, but then I added the second one just for ease of mounting a thumbdrive. When I restarted however, dosfsck would throw an error and say "reboot is required".. It would proceed to do this over and over. /dev/sdc was not in the computer at this time. I fixed it by Ctrl-Cing at the reboot prompt and then remounting everything to get a usable system and then commenting both of those lines out in fstab.
Is this expected behavior? Also, I'm still on the old rc.d scripts, I'm not for sure if this affects systemd(maybe a brave soul could try it)chris_l wrote:
earlz wrote:/dev/sdc /mnt_usb vfat users,noauto,umask=0000 0 1
/dev/sdc1 /mntc1 vfat users,noauto,umask=0000 0 1
That it makes no sense. You are trying to mount the /dev/sdc directly to /mnt_usb (btw, create subdirs under /mnt instead), but you are also trying to mount a partition under sdc under /mntc1.
Mounting a device directly is done only if you don't have partitions there, but if you do, you mount the partitions, not the device itself.
I did it this way because I wanted easy command-line mounting of thumbdrives, and other USB devices. I have a device that implements a FAT filesystem( http://mbed.org ) which can't have partitions... But, I also like to be able to mount a thumbdrive(with partitions) in a similar manner.
Is there a better way around this then? And also, should this really cause a bootloop? It seems it should fail a bit more... gracefully -
AHHH! MacBook in never-ending restart loop!
After installing the AppleCare protection plan software and playing around with iDVD and iMovie for a couple of minutes, my MacBook randomly shut down. The last dozen times I've tried to turn it on, it goes through the white screen with the apple logo and a progress wheel, then goes immediately to a grey screen that says:
"You need to restart your computer. Press the power button for several seconds or press the restart key." in 5 languages.
I tried calling tech support - but they're closed for the holiday...Some basic steps to try...
Boot to the Install DVD (hold C key on startup) and when the top menu appears launch Disc Utility and verify/repair both permissions and the drive.
On the restart, try a SMC reset.
Failing this you might try booting into Safe Mode to see if things improve. -
Purchased a song on I-tunes....won't let me listen to it...says my computer is not authorized...first time in 3 years that this problem occured ...I went to STORE/AUTHORIZE ,,,and it says my computer is already authorized....never-ending loop ...HELP ! Won't play on Ipod either
Delete and redownload it if doing so is free in your country.
(88542) -
Never ending automatic repair loop
I'm working on a client's HP ENVY TouchSmart 4-1215dx Ultrabook that is stuck in a never-ending automatic repair loop. I have done a system diag...all passed . Tried multiple ways to get into BIOS to do a repair from a USB stick made from another OS 8....but can't get into BIOS to change the boot. Tried F11 to do factoy resest....just puts me back into the loop. I have a feeling my client downloaded a bad 8.1. Considering pulling the HDD and using my desktop to at least try and save her personal data....Please help!
Kris_ClearFIxPC wrote:
I'm working on a client's HP ENVY TouchSmart 4-1215dx Ultrabook that is stuck in a never-ending automatic repair loop. I have done a system diag...all passed . Tried multiple ways to get into BIOS to do a repair from a USB stick made from another OS 8....but can't get into BIOS to change the boot. Tried F11 to do factoy resest....just puts me back into the loop. I have a feeling my client downloaded a bad 8.1. Considering pulling the HDD and using my desktop to at least try and save her personal data....Please help!
That would be the best thing to first do and then use the recovery media of which you will now have to order since the O/S seems corrupted beyond repairs. This way you can be sure the recovery media will restore it back to factory install and hopefully they will not do this again til they will consult first before upgrading the O/S.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015- -
AdamSync from AD to LDS goes into a continuous never ending loop... can't figure this out.
I THINK I've got this thing configured up to the point where it should be able to sync. The XML config is set to just grab a single OU with roughly 12 accounts in it.
Everything seems to connect OK, then it does a ton of "Processing Entry", even though there are only a few accounts in this OU.
Then it begins to do "Adding target object..." and gets stuck in a never ending loop.
Can someone point me in the right direction on how to troubleshoot this?
This is what the log looks like:
==========================
Adamsync.exe v1.0 (6)
Establishing connection to target server localhost:6389.
There is already an active sync session in progress.
Please allow the session to complete, or use -mai to seize the role.
Saving Configuration File on CN=Test,DC=domain,DC=org
Saved configuration file.
ADAMSync is querying for a writeable replica of 10.10.10.10.
Error: DCLocator call failed with error 1355. Attempting to bind directly to string.
Establishing connection to source server 10.10.10.10:389.
Using file .\dam9280.tmp as a store for deferred dn-references.
Populating the schema cache
Populating the well known objects cache
Starting synchronization run from dc=domain,dc=org.
Starting DirSync Search with object mode security.
Processing Entry: Page 1, Frame 1, Entry 0, Count 0, USN 0
Processing source entry <guid=94f6d930da2339439df75278a02accae>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 1, Frame 1, Entry 1, Count 1, USN 0
Processing source entry <guid=bf15bc4b684ece4f99010548e79decb0>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 1, Frame 1, Entry 2, Count 1, USN 0
Processing source entry <guid=fcea01637658134eab7ec74fe022d4fe>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 1, Entry 35, Count 1, USN 0
Processing source entry <guid=5e768f4392863b4d86935e6bf01acc25>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 1, Entry 36, Count 1, USN 0
Processing source entry <guid=b5d263a264aad045b8f42f19b49dd844>
Previous entry took 0 seconds (16, 0) to process
Processing Entry: Page 3, Frame 1, Entry 37, Count 1, USN 0
Processing source entry <guid=f19994051c804846b7bcbd066d9e9d40>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 1, Entry 38, Count 1, USN 0
Processing source entry <guid=b16cd765bafa4f4d8649d91f0f055e5f>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 1, Entry 39, Count 1, USN 0
Processing source entry <guid=6be6a7d551978445aafd3803e60dc560>
Processing in-scope entry 6be6a7d551978445aafd3803e60dc560.
Adding target object CN=User Name,OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org.
Adding attributes: sourceobjectguid, instanceType, objectSid, sAMAccountName, lastagedchange, objectclass,
Adding target object CN=User Name,OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org. Requesting replication of parent.
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 2, Entry 0, Count 0, USN 53438354
Processing source entry <guid=bbb4a760a8281741a11d9331efaa3d7a>
Processing in-scope entry bbb4a760a8281741a11d9331efaa3d7a.
Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org.
Adding attributes: objectClass, instanceType, sourceobjectguid, lastagedchange,
Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org. Requesting replication of parent.
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 3, Entry 0, Count 0, USN 52660067
Processing source entry <guid=8d3ef319dff31f47819632af2da5df2c>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 2, Entry 0, Count 0, USN 53438354
Processing source entry <guid=bbb4a760a8281741a11d9331efaa3d7a>
Processing in-scope entry bbb4a760a8281741a11d9331efaa3d7a.
Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org.
Adding attributes: objectClass, instanceType, sourceobjectguid, lastagedchange,
Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org. Requesting replication of parent.
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 3, Entry 0, Count 0, USN 52660067
Processing source entry <guid=8d3ef319dff31f47819632af2da5df2c>
Previous entry took 0 seconds (0, 0) to process
===================================================Hi,
Are there any error messages from the event log?
Here is a KB article which describes a similar issue below I suggest you refer to:
Error message when you use the Adamsync tool in Windows Server 2003: "Error: We seem to be in an infinite recursive loop"
http://support2.microsoft.com/kb/926933
Best Regards,
Amy -
A never ending loop...not sure why?
When I run my current procedure, it seems to be getting caught in a never ending loop, not entirley sure what the problem is...? I'm not quite the expert so if possible, the more detail in the explaniation the better...thanks!!
--The cursors
cursor konami_mlb_pitchers_crsr is
select player_id_1032
from customer_data.cd_baseball_pit_ytd_stats
where split_number = -3
and game_type_id = 1
and sequence = 0
and season_id = iSeasonID
order by player_id_1032;
cursor konami_mlb_career_pit_crsr is
select ytd.player_id_1032,
ytd.player_id,
ytd.moniker,
ytd.last_name,
sum(ytd.games_played),
trunc(sum(ytd.outs_pitched) / 3) || '.' || mod(sum(ytd.outs_pitched), 3) as innings_pitched,
sum(ytd.complete_games),
sum(ytd.shut_outs),
sum(ytd.wins),
sum(ytd.losses),
to_char((sum(ytd.wins)) / decode(sum(ytd.wins) + sum(ytd.losses), 0, 1, null, 1, sum(ytd.wins) + sum(ytd.losses)), '0d000') as winning_pct,
trim(to_char( (9 * sum(ytd.earned_runs)) / (sum(ytd.outs_pitched) / 3) , '990d00')) as era,
sum(ytd.strikeouts),
sum(ytd.saves),
sum(ytd.hits),
sum(ytd.home_runs),
sum(ytd.walks),
sum(ytd.hit_batters),
sum(ytd.earned_runs),
sum(ytd.runs)
from customer_data.cd_baseball_pit_ytd_stats ytd, customer_data.cd_baseball_roster rost
where ytd.split_number = -3
and ytd.game_type_id = 1
and ytd.sequence = 0
and rost.player_id = ytd.player_id
and rost.league_id = iLeagueID
and ytd.season_id <= iSeasonId
and ytd.active_record != 'R'
and ytd.player_id_1032 in
--Includes Players that were on the DL for the entire season
select player_id_1032
from customer_data.cd_baseball_roster r
where r.year_last = 2008
and r.league_id = iLeagueID
and r.player_id_1032 is not NULL
group by ytd.player_id_1032,ytd.player_id, ytd.moniker, ytd.last_name; --Where the cursor gets opened
open konami_mlb_pitchers_crsr;
loop
fetch konami_mlb_pitchers_crsr into pitcher;
exit when konami_mlb_pitchers_crsr%notfound;
open konami_mlb_career_pit_crsr;
loop
fetch konami_mlb_career_pit_crsr into pitcher_record;
exit when konami_mlb_career_pit_crsr%notfound;
utl_file.put_line(file_handle, pitcher_record.first_name || ',' ||
pitcher_record.last_name || ',' ||
pitcher_record.id || ',' ||
pitcher_record.games_played || ',' ||
pitcher_record.innings_pitched || ',' ||
pitcher_record.complete_games || ',' ||
pitcher_record.shutouts || ',' ||
pitcher_record.wins || ',' ||
pitcher_record.losses || ',' ||
pitcher_record.winning_pct || ',' ||
pitcher_record.era || ',' ||
pitcher_record.strikeouts || ',' ||
pitcher_record.saves || ',' ||
pitcher_record.hits || ',' ||
pitcher_record.homeruns || ',' ||
pitcher_record.walks || ',' ||
pitcher_record.hit_batters || ',' ||
pitcher_record.earned_runs || ',' ||
pitcher_record.runs);
end loop; -- end loop through the stats for each pitcher
close konami_mlb_career_pit_crsr;
end loop; -- end loop through all the pitchers
close konami_mlb_pitchers_crsr;You don't seem to be using the cursor iterator variable "pitcher" when you print the data to the file. You are not even passing any parameter to the "konami_mlb_career_pit_crsr" cursor. As such the first cursor "konami_mlb_pitchers_crsr" appears to be redundant.
Maybe the loop is time-consuming (instead of "never-ending"), and if you wait long enough, it will end. In the meantime, you may want to tune your logic.
isotope -
Wireless printer is setup, but the HP Installer Setup program is in a never-ending loop
Wireless printer is setup (HP Officejet 4500), but the HP Installer Setup program is in a never-ending loop. It says "Fatal error during installation." and keeps trying to uninstall/reinstall/ etc etc etc. Printer is setup and runs fine, just need to get rid of this crazy loop - any guidance?
Dee
This question was solved.
View Solution.Which OS is installed?
I recommend that you uninstall the printer software from the HP folder in start-->All Programs -->HP --> uninstall software
After the uninstall is completed and your system restarted install and configure the printer again.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
I am trying to stream data off a real time module and then perform some calculations on it. I am reading the data through a front panel on my PC. I want to find a way to measure the max and the min of each data stream. I constructed the attached VI to do that. Since the loop does not end, the data gets stuck in the loop and no more data is read from the real time module. I cannot end the loop because then the max/min calculations will end. I have thought about storing all of the information in an array and then using the array min/max VI to do my calculations, but this would be extremely inefficient because I need my model to run for hours on end. Is there a way to calculate minimums and maximums without a loop or storing everything in an array? Sorry for the newbie question.
Attachments:
max test.vi 27 KBYou are close to your solution. You need to wrap you data acquisition code with something similar to this loop. The way it is now the data is only read in once, then as you note it is stuck in the array. Another thing is the initializing values. If you make both of them 0, and use the same type as the input data, they will immediately show the min and maxes. Additionally, you can make your comparisons G.T or L.T rather than G.E. or L.E. Another method, if you can't put the data acquisition in this loop would be to make it a "LabVIEW2 style global", consisting of three states, initialize, write, read. The vi is called, with the initialize method before the DAQ loop, the write is called right after your DAQ, and in another loop the read is called.
Putnam Monroe
Senior Engineer - North Shore Technology, Inc.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion
Attachments:
MinMax.vi 45 KB -
How to make a never-ending(looping) page in DW?
I want to make a page which repeats itself on the ipad when you scroll in any direction. In essense a never ending page.
Jus began using HTML5 for our app.Hi
You can do this just by repeating the code, but this is a sure way to stop anyone visiting your site -
The 'new' page is downloaded every time, (complete waste of bandwidth).
Your user will think that there is something wrong, so will go somewhere else.
On mobile devices bandwidth is now often limited and/or paid for.
A site that just repeats itself will on devices that can display the entire page download all the pages, ad infinitum.
PZ -
My icalendar data is on a never ending importing how do I get it to stop?
My icalendar is on a never ending importing how do I get it to stop!
Items purchased in an account a permanently associated with that account. You cannot split accounts nor merge them. You can log in with your family account and download items that way. In the long run though, especially if you are using other Apple devices, you may encounter problems with authorization. You should look into making new purchases with your own ID.
-
hello, i have the problem that my itunes match never ends the sync.
It runs always in a loop
Itunes is in german
I found a lot of solutions with the alt key, deactivate and activate Itunes Match and other, but nothing help.
have anyone a idea what i can do??
UdoI ended up calling Apple, and they had me completely reformat the iPod. This seemed to fix the problem.
Maybe you are looking for
-
Hi, I am trying to create a Chart Web Part that is connected to a list. I inserted a Chart Web Part on the page. In Step 1, I chose, Connect to a List. In Step 2, I chose the List, "QPAPForm" After I connect to the list (QPAPForm), and I get to step
-
help me out!
-
Oracle8 Enterprise Edition for Windows 8.0.6 - Info reqd. Pls help !
I'm a naïve user in Oracle and would like to know the following details from the Gurus. Any information in this regard will be highly appreciated ! We are trying to use Oracle8 Enterprise Edition for Windows 8.0.6 for some specific reason. Some gener
-
I want to switch my photography website from Zenfolio to Behance Pro but before I do I want to confirm that Behance provides the capability to have client login and purchasing capabilities. I've not explored Behance in minute detail, but I just don't
-
Limited Number of visible slides in TOC?
Hi, I have a project with 22 slides marked as visible in my TOC. When I preview the project, TOC items 1-19 navigate to the slide correctly when I click on them, but items 20-22 don't do anything. Is there a limit to the number of items that will wor