Never ending hourglass when we switch addons as mandatory
Hello
We are in B1 2007 PL 42 and everytime we put an addon as mandatory, in the log-in procedure, the hourglass never disappears unless we click on something. This is a bug as some of the users consider they cannot work until the hourglass disappear.
Can anyone help ?
Regards
Fabrice
Yes it seems to be a bug but user can continue to work.
You are right clicking on a menu item brings the cursor back.
Probably upgrading should help.
Similar Messages
-
Hi Everyone-
I have the continuous hourglass problem, and have had for three days now. I've taken my battery out about 6 times, and it doesn't seem to be working at all. I tried changing my theme, but that didn't fix it.
Any ideas?
Thanks!Have you upgraded the OS lately to OS 4.5, and do you have a media card in the BB?
Remove the Media Card for a day or several hours and if the hourglassing stops or continues.
Read this on how fix the Media Card (courtesy of John Clark, another expert here in the Forum):
1. Removed the Media Card from the device and put in a card reader. This makes the rest of the process much quicker. However, you can do it with the card in the device.
2. Copy the entire contents of the card to your PC.
3. Put the card back in the device and go to Options >Media Card >Menu key >Format Card. This will wipe the card and reformat it. (if using a card reader remove the card and put it back in the reader.)
4. Now copy back JUST the media to the device. Do NOT copy back any "BBthumbs.dat" files or any system files. I went through the entire folder and deleted every .dat file before copying the contents of the music folder and pictures folders back to the device. The device will recreate these files. Also, I didn't copy the actual "music" folder but rather just copied the contents and pasted in the card's \Blackberry\music folder. Do this for each folder.
5. When finished put the card back in the device and try the Media App again. It should scan for music. If you have lots of music it can take 5-10 minutes. During scanning you can open the Music app and you should be able to see the songs moving around in the list as the device scans
If after transferring all your files back you still get a stuck scanning bar or device reboots then you have a conflicting file on the card. I've seen video files do this but it could be a music file too or (less likely) a picture file. Remove all the files you transferred and see if the reboots stop. Then add back each folder one at a time to see if you can narrow down to the folder that's causing it. Once you find the folder then you can narrow down to a particular file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I'm new to Macbook Pro, and never imagined I would have problems saving bookmarks when I switched to Mac. Any suggestions with this issue? I have Safari 6.0.4, and has Apple come up with a permanent fix?
Triple-click the line below to select it:
~/Library/Safari/Bookmarks.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above. -
"Waiting for applying changes" staying forver when syncing, never ending. Cant finish syncing: latest ITumes with IPhone 4S, last iOS.
"Waiting for applying changes" staying forver when syncing, never ending. Cant finish syncing: latest ITumes with IPhone 4S, last iOS.
-
When I turn on firefox the sound of an alarm begins and keeps going. I did not download or add or open anything. A sound like the old pacman game initiates the never ending alarm. It does not occur with safari and ends if I close firefox.
== This happened ==
Not sure how often
== I opened firefoxdont have google open in a tab!!!!!!!!
(if you are one who opens FF and it opens google then immediately open another tab to go to a site then just visit the site from the page that opened without opening a new tab)
OR
if you have cool preview then disable that
(the sound is for the celebration of 30 years of pacman and you can play the game on google's homepage) -
I am using I Photo 4.0.3. When I start it, loading pictures never ends and I cannot use I Photo; What can I do?
When did this begin? Did you run any updaters just before this began and, if so, what were they?
That's a very old iPhoto version so give this a try:
1 - launch iPhoto with the Command+Option keys held down.
2 - select Options #3 and #4.
4 - Rebuild the library.
If that fails to help continue with this:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
When I open iTunes , iTunes Match started to process step 1. Always same process and never ending
When I open iTunes , iTunes Match started to process step 1. Always same process and never ending...
I tried some suggestions but I cant fix my problem. Do you have any knowladge about this problem?For the past few months, and several iTunes upgrades, iTunes Match spends some time in Step 1 "Gathering" and sending information to Apple. Then Step 2 runs through the first 2092 of 2094 pretty quickly. Jumps to 2094. And then immediatly back to Step 1 again.
Repeat every 5 minutes or so until Match is manually turned off. -
SOLUTION for the never ending reboot loop when charging
I used my iPad until the battery was completely flat, then when I went to charge it, it got stuck in the never ending reboot loop where it shows the Apple logo for about 30 seconds, then shows the home screen for a split second before shutting down and repeating the whole process again and again.
So here's what you need to do to fix this problem without having to restore or plug into iTunes.
1. Plug in the charger
2. When the Apple logo appears, unplug the charger
3. As soon as you see the home screen appear, plug the charger back in. You need to do this quickly as the home screen only shows for a split second
4. The loading wheel should appear and shut down the iPad
5. Leave the iPad for a good 30mins or so just to get some battery life into before you start using it again.
And that's it!Figured I'd start recording the errors I get in the Installer Log:
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: some files for GarageBandinstrumentsTiger may not have been written correctly.
localhost : BomFileError 0: Unknown error: 0 - ./Instrument Library/Sampler/Sampler Files/Grand Piano/054F#2KM56M.wav
localhost : Install failed: some files for GarageBandinstrumentsTiger may not have been written correctly.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iDVDThemes_Tiger may not have been written correctly.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iWeb_App may not have been written correctly.
localhost : Install failed: Error encountered while writing receipt for iWebtempja.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iWork Trial may not have been written correctly. -
I am using Office for MAC 2008, when I switch to other applications on my MAC, to copy and paste something for instance and then go back to Office window it never brings me back to the window/worksheet I was working on. I have to click on the Window tab in excell for instance, but my window is ticked but not appearing. I then have to click on one of the other open files and then click back to the sheet I was working on for it to appear. Can any one tell me why?
Does that happen only on web pages that are running a Flash presentation? <br />
When Flash "steals focus" from Firefox, you need to click outside the Flash presentation in the browser window, to regain focus in Firefox. A major problem arises when the Flash presentation is in the entire browser window, though. The Firefox developers are working on fixing that in Firefox, but it doesn't look like a fix is going to make it into Firefox 4.0, though. -
Purchased a song on I-tunes....won't let me listen to it...says my computer is not authorized...first time in 3 years that this problem occured ...I went to STORE/AUTHORIZE ,,,and it says my computer is already authorized....never-ending loop ...HELP ! Won't play on Ipod either
Delete and redownload it if doing so is free in your country.
(88542) -
D10, boot problems, a never ending fan test!
I hate this noisy fan test!!! My dog always panics, if it is in the room! But that's not the problem.
If I switch on the external mains, the fan test starts and ends after some ten seconds.
If I push the switch at the front of the maschine, the fan test starts and - sometimes - never ends. In this case, the maschine - obviously - will not boot. What to do? - Repeat the procedure. Sometimes I need 10 or more attempts to boot the maschine.
Now I found (shortly before I decided to bring the maschine back to the dealer): The fan test succeeds nearly every time (and the maschine will boot), if I switch off all the external USB-devices (5 disks, WLAN-stick, memory stick, etc).
My questions:
what's going wrong with the fan test at my maschine?
is it possible to skip this crazy fan test?
Thanks for your help!
Lenovo PC Think Station D10 6427-H6G, Windows XPregarding the fan test, this cannot be disabled. thinkstations are designed for 24/7 uptime just like servers and the BIOS tests the fans at every boot/reboot. since there isn't much reason to turn these systems off or put them asleep, the best workaround is to leave your D10 running 24/7 as it was designed to do. mine only gets rebooted for windows updates, software updates, or video driver updates. otherwise, it's up 24/7/365.
regarding the fans getting stuck, update your BIOS. the latest version can be found here.
also, if you put your system to sleep, be sure to wake it with the power button and not your keyboard. a few users have reported their fans getting stuck when waking with their keyboards. i'm not aware of the issue happening when using the power button.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600 -
Hi,
when I refresh the cache in PI... it always stays in the state : Cache Content is being updated...
It never ends and I'm getting some really strange behavior in Integration Builder like when I configure a configuration scenario and put a communication component for a business system, it is ok but then the setting just disapears if I switch to another business system in the graphic and comme back...
It looks like a cache problem and its driving me crazy. Its actually easier when you have an actual error rather than a never ending process.
Thanks.Hi
-->Please Follow the below steps for CACHE REFRESH,If these does not solve your problem contact your basis people and restart the Server.
-->In ID fro MENU->TOOLS->Click on Cache Notifications ans see the status if the cache is not updated.
then goto T-code SXI_CACHE and do the Full cache and Delta cache refresh.
-->Also check the RFC destination of type H in your PI system INTEGRATION_DIRECTORY_HMI is working or not if not check the path prefix and your technical settings and logon security correct or not.
>Also do the cache refresh from PI home page ADMINISTRATION>CACHE OVERVIEW ,Do the cache refresh for IR ,ID and RWB.
Thanks -
Launching a never ending vi in sequence
Hi!
I have a vi that can basically be represented by a while loop that never stops until i press a button.
I want to load and run this vi from a sequence without it hanging up that sequence.
Also, at the end of the sequence it would be great if it could end the loop in the vi.
For this last part I made the vi read out a variable in my locals and stop the loop as soon as it is a certain value.
(I think this is a good solution, but any suggestions are of course welcome )
For being able to run the rest of the sequence, even though the vi never ends, I was less successful.
I tried putting the vi in a subsequence and then running that subsequence in a different thread.
However, stepping through the main sequence, it does steps over the call of the subsequence,
but then the main sequence still freezes until i stop the loop in my vi.
What am i doing wrong exactly? Any help would be much appreciated!
Solved!
Go to Solution.Run Asynchronous VI basically uses a sequence call module with the "New Thread" option, but I don't think it does much more than that. I think you still have to do ExternallySuspended and/or Termination monitor in your vi. At any rate, I recommend against using Run asynchronous vi as there have been issues with using that step type (confusion over what passing ThisContext means for the most part). See the following link for more details about the issues with Run asynchronous vi if you are interested:
http://forums.ni.com/ni/board/message?board.id=330&message.id=28101&query.id=753835#M28101
As far as termination monitor not detecting whether or not the original thread has completed normally, that is not its purpose and not always what a user might want. For example, you might have a worker thread that you want to keep running even after the thread that launched it completes. There might even be more than two threads in the execution and the execution technically isn't complete until all threads are done, including the asynchronous ones. The purpose of the termination monitor is to give the code module a way to detect when the user is requesting a terminate or abort so that it can return and allow the execution to terminate or abort normally (an execution cannot terminate or abort while a code module is still running).
Like you are suggesting, you can probably pass in the original caller's thread as a parameter to the asynchronous sequence and your VI and call Thread.WaitForEnd on it with a 0 ms timeout to check if it's done in your loop. You need to make sure that you unchecked the "Automatically Wait for the Thread to Complete at the End of the Current Sequence" setting on the advanced panel of your sequence call step though or your threads will both be waiting for each other and never complete. Also the sequence view of the execution is likely to switch to your asynchrous thread at the end because it will be the last thread running, so if you don't want that you should probably just go with passing a boolean variable instead and leave the setting "Automatically Wait for the Thread to Complete at the End of the Current
Sequence" checked. Do not ever pass ThisContext from one thread to another though as that is the source of the problems people are having with Run VI Asynchronously.
Hope this helps,
-Doug -
Labwindows recompiles files when I switch from the development environment to another application
I am writing a labwindows driver, but having issues with the environment itself. I am able to compile the .c file for the driver, and my panels are working. I am having problems with labwindows recompiling the .c file even though nothing has changed. It is a random problem that I have seen before, but never managed to get around. The problem shows up in a variety of instances.
I.E. While in interactive execution, I can click on another application on the taskbar (internet explorer, email, etc.) and labwindows displays a message that the c file is being recompiled. Nothing in the file changed! Why does it try and recompile when it is simply losing focus? This is 'random'. Just when I think I have found a way to reliably reproduce the issue, it quits recompiling when I switch applications. I have tried playing with the build options, but haven't had any repeatable success. I even tried to enable the -o option, but is still recompiles the file. (maybe -o won't work on a driver since it won't build without a main?) I have even had issues with calling printf in a function during interactive execution. It recompiles the c file for no apparent reason right after the stdio window prints the message. At this point, the stdio window closes, and labwindows pops up the compiling message again. It kills my interactive session, and I have to redeclare all of my variables to continue checking out my driver.
I see the same issue randomly when I go back to the project from another application. (Click on labwindows in the taskbar, and it immediately compiles the c file.)
I have seen this in other projects, and it appears that the issue is limited to instrument drivers. When labwindows pops up the message that it is compiling files it is almost always a driver that is loaded as an instrument. I played with unloading the instrument but leaving the .fp in the project, but I don't think that worked. (It has been awhile since I tried to figure this out.) When working on a driver, it would be difficult to unload the .fp or not load the instrument anyway.
(I just clicked on labwindows in the taskbar to see if I left anything out. Labwindows popped up the message that it was compiling the c file. It appears that I can go back and forth between the labwindows icon in the taskbar and the cvi icon ~15-20 times and then labwindows will recompile the file. I even walked away from my computer for a couple of minutes, and it compiled when I came back and clicked on the labwindows icon.)
I am running labwindows 9.1 (but have seen this on 8 also)
The files are on a network drive.
(Could it be mcaffee or some network security stuff confusing labwindows?)My pc is currently running Windows XP sp3.
I first saw this issue when I went from LabWindows 7.1? to 8.1? I am sure that I had the issue in 8.1
I was able to reproduce the issue in production on a pc running windows 2000. (Which is what I had at my desk previously, and had seen the issue.)
I asked another member of the test engineering group, and I am not the only one seeing the issue.
One of the earlier replies mentioned the auto save feature. When I went to production to see if I could reproduce the problem there, I opened CVI and explorer. I wanted to check the time-date stamp on the .c file that keeps recompiling. The time-date stamp was a day old, and did not change when the period of time for auto save was passed. (It probably would if I made changes but didn't save the file?) I was able to switch back and forth between the explorer window and cvi, and the file would recompile. I played with turning off the auto save, enabling the build status window, making the -o option compatible with cvi 5.0, displaying the build status column, etc. It appeared at one point that it had quit recompiling when switching between applications. I went back to my desk, and tried to match the settings, but never reached the same conclusion.
There is not anything special about the project I am working on. It is a labwindows driver for a pxi module. There are only three files in the project, the .c .h and .fp. The .c file keeps getting recompiled at seemingly random times. It is especially frustrating during interactive execution while testing my code/function panels. If I switch to another application and back, I almost always have to start over because compiling the file closes the interactive execution. I have to redeclare all of the variables, and re-run any of the setup panels that are required. (I have to open the DRM, load the module fpga/dac, and then I can run the panel I am actually trying to test.) I have similar problems when trying to troubleshoot with printf statements, as it seems to recompile when focus switches to the stdio window. I have resorted to a test project, where I can add the function calls and skip having to do any work via interactive execution.
I haven't been able to find anyone outside of where I work reporting the same issue. Maybe it has something to do with IT/viruscan/etc. It is definately a strange issue.
(I have switched back to CVI several times while writing this, and the .c filed recompiled about 20% of the time. At one point, I had left the build options dialog open when switching back and forth. I did not change any options, but the .c file recompiled when I closed the options window?)
Occasionally, when I see what appears to be the recompile message flash up, my interactive execution does not halt. I.E. I don't have to redeclare my variables. It is sometimes hard to see what the message says, you just see a dialog box pop up and disapear really quickly. -
im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!
I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck.
Maybe you are looking for
-
How do i transfer music from an external hard drive to itunes on my macbook pro?
how do i transfer music from an external hard drive to itunes on my macbook pro?
-
iTunes 7.1 does not have a scroll down bar showing the different artists in my library - is it hidden somewhere or has some misguided designer done away with this most useful feature of the old iTunes? Ian.
-
Performance tuning of forms deployed on web
This is regarding forms deployed on the Web. When a form is deployed on the web, every call form results in downloading of the all the images required for the toolbar. Analyzing the OAS log files shows that more than 90% of the http requests from cli
-
Virtual Machine Manager Setup Wizard is hanging
Appears to be 4/5 of the way done (4 of 5 bars are blue). Installing features. Green bar continues to zip across over and over. Installing VMM Console. Been sitting like this for some time now.
-
Unable to repair degraded Virtual disks in Storage Spaces 2012R2
Hi all, I have an anoying problem that I cannot seems to find a solution for. I have a 2 node Failover Cluster with CSV-volumes consisting of 2 HP DL360 servers with 2 LSI 9300-16e HBAs each, connected to 3 Supermicro JBOD-cases with a total of 84 di