Never got my Video I created with Keith Urban sponsored by Verizon at his concert

I went to the Keith Urban Concert on May 7th and participated in Verizon's create a video with Keith Urban in front of the green screen. I was told I would get the video sent to my email and my phone. I got an email that said "Here is your video with Keith" but nothing was in the message of attached to it. Is there a phone number I can call to find out how to get this video?
I have a barcode on the ticket given to me if that's necessary.
Lou Monteleone

I too did a video at Keith Urban's Las Vegas show on 7/18/09.
I signed up for it to be sent to my email address.
It has never come.
I talked with all of my friends who do and do not have Verizon and no one has received theirs by either phone or email.
Was hoping that you could help me.
Verizon VCAST listings on the www.keithurban.net under "The Show"
do not have any of the listings since May 30, 2009.
I have other friends that went to alot of other dates and the same for them too.
Can you help us?
Pebble

Similar Messages

  • How do i verify my iclound account thru my Email if i never got the email to begain with?

    How do i verify my iclound account thru my Email if i never got the email to begain with?

    Make sure you are checking the email address you used to set up your iCloud account.  Check the spam/junk folder as well as the inbox.  If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

  • Never got the Windows MicroSD along with HP Omni 10. What to do?

    Hello everyone. 
    I have the HP Omni 10. I like the tablet, but am facing some windows error and wanted to do a clean boot. I saw the manual and saw that there should have been a MicroSD along with the tablet which should have had windows files.
    But I don't have it, and never had it.
    What should I do? Please help me. My warranty is till April 2015.

    Try one of my previous posts...
    http://h30434.www3.hp.com/t5/Windows-Tablets/Omni-10-Recovery/m-p/4756753#M5536

  • Never got OS X CD with MacBook

    I'm trying to install Windows XP and never got a OS X disk with my MacBook.
    Do you I need it to complete the install or will Windows run properly without it?

    You don't get an OSx disc with any new Mac. What do get is system restore DVD.
    This includes OSx ILife suite printer drivers optional X framework (Unix) application and languages.
    OH AND the Boot-Camp drivers on a Hybrid partition that become visible within Windows XP/Vista.
    To install Windows open the Boot-Camp Application.
    Simplest way is to Cut and Past -
    "Boot Camp Assistant" in Spotlight (without quotation marks), Select and Launch the Application.
    Now follow the Wizards to form a Windows partition, have a Legit Windows Installer Disc MIN XP With integral Service Pack 2, or a flavor of Vista.
    On completion of the partitioning process and whilst still in OSx insert your Windows installer disc and Boot Camp will instruct you to click on the Start installation radio button.
    Your Mac now reboots (Can take sometime) to the Windows Install disc and you now follow the standard Windows install process.
    Eventually after an hour or more , your Mac will reboot into a Vanilla Windows installation.
    You then go through the std Date time place name , and password set up screens and finally arrive at the familiar Windows desktop.
    Next step is to go to My Computer/Computer and select the DVD/CD Drive and eject the Installer Disc.
    Right now insert your Mac _Restore disc_ which should autorun, launching the Boot-Camp driver packages,.
    Again follow the Wizard and the drivers will install.
    In addition to the drivers a NEW and VERY IMPORTANT control panel is installed accessible in Windows Explorer - Control Panel/Performance & Maintenance.
    This is the Boot Camp OS switcher - Its similar to the Mac OS Start UP Disk application in appearance and function allowing you to boot and switch back to OSx.
    At this point you will now have the pleasure of installing all the usual protection necessary for a safe Windows Life and a multitude of Microsoft updates, Firefox and a visit to Apple to download the Boot Camp 2.1 driver update package for your flavor of Windows and install those as well.

  • I excepted firefox update and wish I never got involved with it I am so upset, it changed toolbars and everything and now I cant even get anyone to help. maybe you have a suggestion or you want to fix this since it was your update that created this mess

    I excepted the firefox update and now wish I never got involved with it at all. I am so upset, it change my toolbars and everything and now I cant even get anyone to fix this. maybe you have a suggestion or you want to fix this since it was your update that created this mess.

    See also:
    *https://support.mozilla.com/kb/common-questions-after-updating-firefox
    If you want to restore the Firefox 3 appearance and behavior in Firefox 4 and later then you can find some tips here:
    * http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/

  • Flv video created with flash 8 video encoder

    anyone know why flv files that I've created using the flash 8
    video encoder don't seem to have any metadata in them? or maybe
    they do but they never kick off the NetStream.onMetadata event so I
    can't read it...
    Similarly if I use the 'import video' function of Flash Pro 8
    I get the same issue - yet FLV video created using Sorenson Squeeze
    works fine, so I'm fairly confident that my code is OK.
    Even more bizarrely, if I use the FLVPlayback component that
    ships with Flash 8, that seems to read in the metadata OK!
    argh!
    Just to confuse things even more, the flash help for
    NetStream.onMetadata says: "The Flash Video Exporter utility
    (version
    1.1 or greater) embeds a video's duration [...] into the
    video file itself."
    As far as I can tell I've got version 1.0 of the flash video
    encoder/exporter but I'm damned if I can find out where to get an
    update from...! Ever since CS3 came out it's been harder and harder
    to get hold of stuff about flash 8 on the Adobe site...

    well that's the thing - the metadata never traces out if the
    video was encoded with flash video encoder, but that code would
    work fine with video encoded with sorenson squeeze.
    think I have worked it out now though: in order to pause the
    video at start I am calling NetStream.seek(0) when I receive
    "NetStream.play.start".
    For some reason when I do this with flvs encoded using flash
    video encoder, it stops the onMetaData event from firing - but
    works fine with other flvs! weird... shall have to find another way
    of pausing the video at the start I guess.
    thanks for the reply though

  • Can I keep videos created with the trial of Captivate 6?

    I installed the free trial and thought I read something that I would not be able to keep the videos created with it. Is this true? Is there any way to save something, like the .cp file, so that the work done during the trial isn't for nothing? Thanks!

    Hello there,
    If you are working in Captivate Trial, after you will save the project ( .cptx, .cptl or .cpvc), then you can open that in captivate anytime, it will not be wasted (Captivate Project will never Expire).
    But if you will publsih something (.swf or .mp4) with that project in Trial Version, then that published output will be expired after 30 days of the date of creation.
    You can open your that project (.cptx, .cptl or .cpvc) created in Trial, in the full version or subscription version later, and publish the project, then that published project will last forever.
    Thanks.

  • I created an iTunes account and finished by having a verification email sent out. I never got the email and when I get the note to resend it it won't let me tap on it and below it says, email address is already verified for another Apple ID

    I created an iTunes account and finished by having a verification email sent out. I never got the email and when I get the note to resend it it won't let me tap on it and below it says, email address is already verified for another Apple ID

    Apple requires each Apple ID be associated with a different email address. Perhaps that is why you haven't received the email. Or you received the email and it is in your Junk Mail folder.

  • HT3529 My group messaging on/off label isn't showing up at all. I can only create group messages but every time someone starts a group chat it says its send to my number but I never got any text. I wen't to settings Messages and I can't find any on/off sw

    I can only create group messages but every time someone starts a group chat it says its send to my number but I never got any text. I wen't to settings>Messages and I can't find any on/off switch.

    Hello there, Idaniabb.
    The following Knowledge Base article offers up some great information in regards to group messaging and also links to another excellent resource for troubleshooting messages as well:
    iOS: Understanding group messaging
    http://support.apple.com/kb/HT5760
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • PO got created with item blank

    Hi,
    The Purchase Order got created with item blank.
    first user created PR, by taking the reference of that PR they created PO. after saving only header details are there in PO and line items are missing.
    This issue in Production so we cant create PO.
    any way to check this issue ? since no background job is involved only foreground (manullay) they created.
    Last week i raised another thread for PR creation item blank.
    [ The Purchase requisitions got created without document type and first item blank this is the problem am facing .
    If we try to create a PR in the foreground, SAP doesnu2019t allow any blank line. it will adjusted automatically.and document type also mandatory.
    we dont know how this PR got created ]
    I didnt get any solution for this two issue.
    Help me on this.
    Regards,
    Priya.

    Hi ,
    You can goto change mode which is the item blank PO then give to the item no after save this time is solved na..
    if not solved na. some condition process ... so you can refer to document or note.
    Thanks
    Regards
    I.Muthukumar.

  • PLEASE HELP!  I plugged my new iphone 4 into my computer to charge and it reset to factory erasing all my important pictures and videos of my brand new baby.  I never got a chance to backup to my computer or icloud. How do i get the pictures and video bac

    Please someone help.  I am a recent iphone user and recorded priceless video and pictures of my brand new baby.  I never got a chance to back up my phone and i plugged it into my computer which instead of charging it reset it to factory. PLease someone help me get them back.  I need the pictures of her from the hospital I am heartbroken and freaking out!

    I am so sorry for you and your situation. Were you using iCloud photostream?
    Otherwise I do not see any chance for your precious photos.
    Congrats anyway on the little darling!

  • Have purchased a new computer but can not install elements 12 since it has been installed on old laptop.  Is there a small fee to be able to do this.  Never installed the video editing portion, can this be installed with no problem?

    Have purchased a new computer but can not install elements 12 since it has been installed on an older laptop.  This is a one time user program, is there a code that can be put in or a small fee to pay to be able to use the program again.  Never installed the video editing and hoping this can be installed with no problem.

    If the laptop is still connected Launch Elements in Expert Mode. Go to the help menu and sign-out. That will deactivate usage on the laptop.

  • Table got re-created with 0 entries

    Hello All,
                     In ECC system after refresh BDLS is taking too long time(24hrs to 36hrs) becase of that as per SDN blogs to improve BDLS performance i build the index on few tables mentioned below using SE11 & SE14 t-codes, after completing BDLS I dropped those indexes while dropping BKPF table got re created with 0 entries but other tables are having entries. i have followed sam eprocess for all the tables, after that i tried in sandbox system that system also while dropping BKPF got re-created with ' 0 'entries ,Could you please let me know why it has re-created with 0 entries.
    BKPF   
    CE11000 
    COBK   
    COEP   
    COES  
    COFIS  
    GLPCA  
    GLPCP   
    GLPCT   
    MKPF   
    SRRELROLES

    Thanks for the Prompt response,
    The service entry was created this month
    I did try by checking the "Deliv. Compl." indicator on the PO and then tried to reverse the service entry but I get the same error i.e SE541
    Thanks

  • Video from .ts files (created with Arcsoft Showbiz) played in accelerated.

    Hello everybody, can you explain me why in PREMIERE PRO CS6, the video from .ts files (created with Arcsoft Showbiz) is played in accelerated while the sound is played normally ?
    If it is normal, an update would be great
    Thank you.

    >imported from vhs (with Hauppage Colossu).
    As far as I know, the best way to digitize vhs tapes is with a http://www.grassvalley.com/products/converters product
    Model 55 is one way from tape to computer, model 110 allows exporting back to tape
    Files are DV AVI which edit very well in all versions of Premiere

  • On my Mac, I am working with IMovie and trying to burn to a dvd and get error message 2135?  Never got this before.  What is it?  Thanks

    Using IMovie, I get error 2135 when trying to burn to a DVD.  Actually, it is during the preparation stage.   Never got this before  Whats the problem?  Thanks

    Hi
    You must tell more
    • Error 2125 - I recognize - but -2135 is new to me
    The other is in regard to Movie Length in TIME + MENU time - as this is the limiting factor in iDVD (not GBs or other just time)
    a. How many movies
    b. duration of each movie
    c. Menu selected
    d. Is MENU still and silent - or animating and with audio (Takes lot's of the movie time)
    e. Encoding quality selected in iDVD
    f. HOW did You go from iMovie to iDVD
    g. What version of iMovie and iDVD are You using
    h. FREE Space on Start-Up (Mac OS) Hard Disk - HOW MUCH
    As You see there are lot's of info needed to be of any relevant help
    iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    Yours Bengt W

Maybe you are looking for