Never got the Windows MicroSD along with HP Omni 10. What to do?

Hello everyone. 
I have the HP Omni 10. I like the tablet, but am facing some windows error and wanted to do a clean boot. I saw the manual and saw that there should have been a MicroSD along with the tablet which should have had windows files.
But I don't have it, and never had it.
What should I do? Please help me. My warranty is till April 2015.

Try one of my previous posts...
http://h30434.www3.hp.com/t5/Windows-Tablets/Omni-10-Recovery/m-p/4756753#M5536

Similar Messages

  • How do i verify my iclound account thru my Email if i never got the email to begain with?

    How do i verify my iclound account thru my Email if i never got the email to begain with?

    Make sure you are checking the email address you used to set up your iCloud account.  Check the spam/junk folder as well as the inbox.  If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

  • Never got the serial number

    i never got the serial number by e-mail and i can't register ADE on my Acrobat ID

    creative cloud do not need a serial number. or activation code it will be using your Adobe ID on which you have purchased the creative cloud membership.In case the purchase of CC is complete without any billing issue then
    So you need to login with your Adobe ID and password to activate the cloud membership.
    Log out & log back in of the CC Desktop App.
    In case it is not signing in successfully please try the following:
    I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
       Windows:
       In windows 7 navigate to following location:
         /windows/system32/drivers/etc
       1. look out for "Hosts" file
       2. Open it with notepad
       3. Check if you have any entry for Adobe
       4. Remove the entries and try again launching any product from CC
       Mac:
       1. Please click on "Go" and navigate to /private/etc
       2. Open "hosts" file and check out for any entries for Adobe.com
       3. Remove the entries and save the file
       4.  try again launching any product from CC
    You can refer :
    http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html.
    Please let us know if it worked.

  • I had Firefix, however I downloaded the newest Firefox along with all plugins. Now when I click in the desktop icon firefox refuses to open my default webpage. Why?

    I run Windows 7. I downloaded Firefox 6.0 for Windows which resulted in the following which I cannot fix:
    "I had Firefix, however I downloaded the newest Firefox along with all plugins. Now when I click in the desktop icon firefox refuses to open my default webpage. Why?....How do I fix this"
    I can go to internet explorer or AOL and it opens right up to my homepage but not when I click on Firefox.

    That problem can be caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Unable to email the keynote presentation to using pdf file or PPT file.  It seems went though, but never got the email

    I just purchased the keynotes add from Ipad Mini last night.  My daughter created the presentations from keynotes app and was going to send an emails to her teacher.  This is for her school project, however, when we tried to email as ppt, it gave us an error message that you can not saved or email, so we tried send it as pdf file, it did not give me an error message, however, I never got the email either from last night since I cc myself when we tried to send the project to her teacher and I tried it this morning and did not got through either.  Am I missing something here??  Please help, she needs to turn in her project by today and she is already late with her school work....  Please advise...........
    Thanks,
    Vivian

    Use Dropbox to send large files that cant be sent using email:
    https://www.dropbox.com/

  • [svn:fx-trunk] 9180: When another popup is going away as the alert is going up, the Alert can get validated inside of addPopUp and its centering logic never got the event it expected .

    Revision: 9180
    Author:   [email protected]
    Date:     2009-08-07 15:11:43 -0700 (Fri, 07 Aug 2009)
    Log Message:
    When another popup is going away as the alert is going up, the Alert can get validated inside of addPopUp and its centering logic never got the event it expected.
    add the event listener earlier so it is ready if we get validated inside addPopUp
    QE Notes: versioning/baselines/mp_alert_mask_compatible.png needs updating.  I think the current baseline is incorrect.
    Doc Notes: None
    Bugs: SDK-22819
    Reviewer: darrell
    tests: checkintests mustella/components/alert
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-22819
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Alert.as

    Hi or2tx2002, 
    We're really sorry to learn of all the equipment issues you've experienced in the last year. In order to discuss your replacement options, I ask that you please PM me with your wireless number, a contact number and a good time to reach you. I will be happy to reach out to you and bring resolution to this matter. 
    Thank you and I look forward to hearing from you soon. Make it a great day! 

  • I created an iTunes account and finished by having a verification email sent out. I never got the email and when I get the note to resend it it won't let me tap on it and below it says, email address is already verified for another Apple ID

    I created an iTunes account and finished by having a verification email sent out. I never got the email and when I get the note to resend it it won't let me tap on it and below it says, email address is already verified for another Apple ID

    Apple requires each Apple ID be associated with a different email address. Perhaps that is why you haven't received the email. Or you received the email and it is in your Junk Mail folder.

  • I received a email this morning to reset my password, i did but never got the new password assigned

    I ewcwived a email this morning prompting me to reset my password but never got the new one given to me

    Igot it my mistake, thanks for the quick reply. Sorry to bother you
    Sent from Windows Mail

  • When I downloaded 0S5 on my ipad & iphone i never got the new PC Free or notifications app

    When I downloaded OS 5 on my iphone 4 and ipad 2 I never got the New PC Free and notifications app.

    Neither of these features are instigated as apps. There is a change to the way notifications are displayed, i.e. as a scrollable list with items you dismiss when you want to rather than coming at you one at a time, and one read only. With regard to being PC free, the aim is to allow backup and future updates to possible without connecting to a computer. As far as I know that is good to go now, though I've not signed up for iCloud or tested it yet so I can't say for certain.
    tt2

  • I had a drive failure and lost the iWeb file along with other things.   I did manage to save a lot of user file documents but I don't see or   recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

    I had a drive failure and lost the iWeb file along with other things. 
    I did manage to save a lot of user file documents but I don't see or 
    recognize the iWeb site file. It was on a 15" G4 Titanium pb.
    I'm trying to find a way, using version 2.0.4 of iWeb on a different 
    pb to recover the file into the iWeb app or a way to download the site into iWeb.
    There are 6 pages of images and text, and it 
    would be a task for me to recreate the whole thing again. I did 
    download the site but I don't know how or if I can get iWeb to see it and open it.
    Does anyone have any knowledge about this? The link to my site:
    <http://web.mac.com/danauerbach>
    Any suggestions will be most appreciated.
    dan auerbach
    [email protected]

    Unfortunately iWeb cannot read or import previously published files, only generate them.  You'll have to recreate your site from scratch.
    However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
    OT

  • To capture the selected rows along with edited field contents in alv report

    Dear All,
             I do have requirement where, in alv report output one field is editable and need to save the content of the edited field along with the selected rows.
             For example If there are 10 records displayed in the alv output with 20 fields.
    Out of this 20 fields one field (say XYZ) is editable. Also i have already created a new pushbutton (say ABC) on alv output. Now in the alv output if we maintain some value in the field (XYZ ) for the 2nd and 4th record and select this two records, and when clicked on the pushbutton (ABC) it has to update the DB table.
          I am using the Func Module  'REUSE_ALV_GRID_DISPLAY'. 
          Your early reply with sample code would be appreciated.
    Thanks in Advance.

    HI Naveen ,
    There is an import parameter "i_callback_program" in the function module,
    plz pass the program name to it.
    Capture the command by passing a field of type sy-ucomm to "I_CALLBACK_USER_COMMAND ".  Check the returned command and
    and program a functionality as desired.
    u can try the event double_click or at line selection. there u can use READLINE command to c if the line has been selected.
    In case it is , process the code segment.
    Regards
    Pankaj

  • How to make plant default on the line item along with the item category

    Hi All,
    I want to default Plant on the line item along with the item category.In order to meet the following scnario.
    1. I have two plants,first plant is maintained for the valuated item and the second plant is maintained for the non valuated item (Free Goods).
    Whenever user is entering an item in the sales order for which corresponding free goods item is maintained in the master record.System is proposing two lines items in the sales order.
    First line item is the main item which appears along with the Plant 1 which contains valuated items
    Second line item is for the Free of charge item which is being proposed from Plant 2, which contains the non valuated items.
    I want that the system should always propose Plant 1 with main item and Plant 2 with the Free of Charge item by default. (Along with the item category TAN and TANN)
    Rahul

    Delivering Plant is determined in the following order
    1. Customer material info record.
    2. Customer master
    3. Material master.
    Use one of them an default your plant.
    I think in your case you can use the materila master which will give an item level plant different. The other two will default the plant at the header level.
    regards
    jude

  • How do you copy and paste track changes material in Pages from one point in a document to another and keep both the old text along with the track changed thus far in the new pasted location?

    Depending on whether track changes is on/paused, Pages thinks the pasted material is either all new and thus highlights it as a big track change or just copies the old material along with the edits as plain text so that I cannot see my track changes. I need to be able to copy and paste in the same document and still be able to see the older text along with the changes to certain sections thus far. Is this possible? I need a step-by-step "talk to me like I'm five" instructional if what I would like can be done.
    Thanks for any help!
    Message was edited by: C.M.W.

    What version of Pages?
    What OS, iOS or OSX?
    Are you sure you have the Table selected and not a cell or just contents?
    Peter

  • Lightroom suddenly stopped while I was working in it.  I got the Windows message "Adobe Photoshop Lightroom 64 bit has stopped working.  A problem caused the program to stop working.   I have tried re-booting as well as reinstalling Lightroom 5.7 but when

    Lightroom suddenly stopped while I was working in it.  I got the Windows message "Adobe Photoshop Lightroom 64 bit has stopped working.  A problem caused the program to stop working.   I have tried re-booting as well as reinstalling Lightroom 5.7 but whenever I try to start the program I get the same message.

    Is that really the exact message you are receiving?

  • Got the message "not compatible with this signal" on TV when connecting ATV to HD TV.

    I got the message "not compatible with this signal" on TV when connecting Apple TV to my Sharp HD TV.

    Go into safe mode an uninstall this new game.
    If this doesn't work, uninstall the graphics driver so Win will install it again after restart.
    HTH
    V.
    *** Say 'Thanks' with Kudos ***

Maybe you are looking for

  • How can i select the step count of a recursive CTE ?

    I want to select the step count of this query (which one is do fiirst and continue + 1)  from query below ;WITH EmpCTE( BomID , empid, mgrid,BomMgrId, lvl, Qty , FLG) AS   SELECT     BomID , empid , mgrid, 0 as BomMgrId , 0, Qty , FLG   FROM Employee

  • Mail does not recognize outgoing server for Forwards or content other than text

    Since installing Mountain Lion Mail has been erratic.  It generally will not send mail that I Forward nor will it send mail that includes links, graphics photos, etc.  It sends original mail consisting of text only without a problem.  When I try to F

  • Reinstall Photoshop CC

    Hellö why can I not reinstall Photoshop CC testversion after a system restore?

  • 3.0 German local issue

    Hello, when I open the export dialog the field for the file name is not visible (it is, but only 2 px width) I have to pull the window some pixels wider, then the layout changes and it is fully visible. This only happens with my default local setting

  • Problem with Usermapping

    I have a requirement to create a webdynpro iview and integrate that with portal by adding the feature of Usermapping with SSO. 1) I had created a small webdynpro application to retrieve the data from webservices by giving some inputs. 2) Created a sy