Never put icloud on ipad2. All of a sudden it is demanding that I siign in to icloud. Any idea why?

Also, it brought up an old apple id that is not used anymore. Baffling....

I am in the same situation. All of a sudden I have noticed that my battery almost doesn't get through the day. I am not a heavy user and have push and 3G turned off. My current usage says Usage - 10 minutes, Standby - 18 hours, 30 minutes and my battery appears to be at about 65%. I have tried rebooting but that did not help. I have heard that if you let the phone drain all the way until the battery dies and then recharge it, it helps. I don't really want to do that though!
So, if anyone has any advice, please do say!

Similar Messages

  • In Icloud I can't see my "numbers" icon which i need to select "tick" to transfer data to my other devices via icloud. any ideas why it's not showing up?

    In Icloud on my imac I can't see my "numbers" icon which i need to select "tick" to transfer data to my other devices via icloud. any ideas why it's not showing up?

    You have to do it app wise, which means that the icon won't show up in settings, but you will be able to move files from your local drive to iCloud via the Numbers app (move... > choose the iCloud option).
    It requires that you set up the same iCloud account on all your devices and that you have the latest version of Numbers on all your devices as well.

  • HT5653 Although I've checked all the above, my latest import did not go to photo stream.  Any idea why?

    Why didn't my latest import go directly to Photostream?  I've never had this problem before.  I uploaded a disc from a photographer friend and imported them to my iphoto.  They imported successfully, but never synced on other devices via photostream. 

    Disable Photo Stream in the System/iCloud preference pane
    and in iPhoto's Photo Share preference pane.
    Reboot and reenable both respectively. See if that will jump start Photo Stream.
    OT

  • Ive changed my apple id. in my iPad and iPhone under iTunes it's showing the new id but under iCloud still shows old I'd. I have been told to delete account and add in new one but worried in case lose all my stuff that's already saved in iCloud. any idea?

    Ive changed my apple id. in my iPad and iPhone under iTunes it's showing the new id but under iCloud still shows old I'd. I have been told to delete account and add in new one but worried in case lose all my stuff that's already saved in iCloud. any idea?

    If all you did was rename your ID, you can go to Settings>iCloud, tap Delete Account, choose Delete from My iPhone when prompted, then sign back in with your renamed ID.  Deleting the account only deletes the account and any data you are syncing with iCloud from your phone, not from iCloud.  Provided you are signing back into the same account and not changing accounts, your data will be synced back to your phone when you sign back in.
    If, however, you are changing to a new account with a new ID, choose Keep on My iPhone when prompted.  Then choose Merge when you sign into the new account and turn your iCloud syncing back on to upload your data to the new account.
    Before deleting the account, save you photo stream photos to your camera roll (tap Edit, tap all the photos, tap Share, tap Save to Camera Roll).

  • TS3999 I see all of my calendar events in iCal and on my iPhone, but not in the iCloud web app.  Any ideas why?

    I see all of my calendar events in iCal and on my iPhone, but not in the iCloud web app.  Any ideas why?

    If the calendar is on iCoud.com, all you would need to do to get it on your phone is go to Settings>iCloud on your phone, sign into your iCoud account and turn Calendars on.  The iCloud calendars will then download to your phone.

  • HT1766 I was backing up my phone with Icloud then all of a sudden it is saying that it needs to be plugged into Itunes.  Now I cannot use the phone, what can I do?

    I was backing up my phone with ICloud then all of a sudden it is saying that I have to plug into Itunes.  Waht can I do?

    Not really necessary to go into DFU mode when the device is just reporting it is in recovery mode if it is saying connect to iTunes. Connect to iTunes and do a restore. See this support document if you have any issues. http://support.apple.com/kb/HT1808

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
    As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
    Power off the AirPort by pulling the power cord
    Wait a minute or two
    Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
    Release the reset button and allow a full minute for the AirPort to restart
    Now try to configure the AirPort again.  If you continue to see the same symptoms as before, the AirPort will need to be replaced.

  • Sometimes after putting my iMac to sleep, I can't get it to wake up and have to turn it off at the mains. Any ideas why?

    Sometimes after putting my iMac to sleep, I cannot get it to wake up again. It's as if it's shut down and I have to turn it off at the mains and restart it.  Any ideas why? Does this keep happening to anybody else?

    That message means that you have to restore the iPad now. Something went wrong. You need to restore the iOS software and then restore from the backup.
    Read this carefully and follow the instructions. Make sure that you restore from your backup at the end of the process. That is covered at the bottom of the support article.
    http://support.apple.com/kb/HT1414

  • HI, I am trying to connect my macbook pro,  18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector.  It all fits but the there is nothing happening? no mirroring option. Any ideas?

    HI, I am trying to connect my macbook pro,  18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector.  It all fits but the there is nothing happening? no mirroring option. Any ideas appreciated.  Many thanks

    to get to the Detect Displays button you have to hold down the Option key and the button appears.
    SeanfromFulham wrote:
    Many thanks, however I don't seem to have any relevant options under displays.

  • My Apple TV does not recognise My iTunes password. It works on all other devices but not Apple TV? Any ideas why or how to fix?

    Any ideas why my Apple TV does not recognise my iTunes password, when all other devices, including these communities are good with it?

    Hi Mick2291,
    Thanks for visiting Apple Support Communities.
    I'd suggest restarting, and then restoring, your Apple TV if the issue persists:
    Apple TV (2nd and 3rd generation): How to restart your Apple TV
    http://support.apple.com/kb/HT3180
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Best Regards,
    Jeremy

  • Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?

    Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?
    Solved!
    Go to Solution.

    Chuck72352,
    Hello! It is my understanding that you need to add the individual files to the Source Code Control along with the .lvproj file.
    Here is a great deal of information on Source Code Control Practices in LabVIEW.
    Ben Sisney
    FlexRIO V&V Engineer
    National Instruments

  • I purchased a song through iTunes on my MacBook which I have owned for years using the same Apple ID and all of the sudden I am not authorized to listen to this song only? Why? How do I fix it cause it's making me very mad...

    Just purchased a song through iTunes on my MacBook which I have owned for years using the same Apple ID and all of the sudden I am not authorized to listen to this song only? Why? How do I fix it cause it's making me very mad...

    Hi E_WM7,
    Welcome to Apple Support Communities!
    Take a look at the article linked below, it provides suggestions that may be able to resolve the authorization issue.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    -Jason

  • Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    rtilghman wrote:
    telling me to buy a new router is NOT a solution.
    And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
    Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
    What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

  • I can't seam to get all my songs from my iPhone to my iTunes account on my mac. any ideas?

    I can't seam to get all my songs from my iPhone to my iTunes account on my mac. any ideas?

    iTunes will not transfer non-purchased media from you phone to your computer (only purchased media).  Non-purchased songs only sync one way: from computer to phone.  If you want to transfer non-purchased music from your phone to your mac you will have to purchase 3rd party software such as Touch Copy.  Purchased media, including music, can be transfered to your iTunes library by connecting to iTunes, right-clicking on your phone when it appears on the left sidebar, and choosing Transfer Purchases.

Maybe you are looking for

  • How to set system date as a default value in UIX/XML page?

    Example: We set default values using following statements: <set property="inputValue" target="${bindings.PoNumber}" value="${'1234'}"/> <set property="inputValue" target="${bindings.UserName}" value="${param.MyParam1}"/> In JDeveloper Help, we cannot

  • Having a problem with images on Mac/Safari

    Hi!     I got a Mac in March of this year, and I love it! But ever since I first got it, I've been having this problem. You see, about 4 days in, I started making audiorecordings on my Mac, and since then I've noticed a bit of a stuttering. Images ar

  • Resolve kernal (?) panic problem

    I'm not sure if this is a kernal panic but, this morning I have had my computer screen go grey requesting that I shutdown/restart. I'm running Lion. Below is a portion of the Panic Report. Can anyone please take a moment to see what the problem is? (

  • PO item without charge

    Hello gurus, simple newbie question (I think): In our system there is a PO with GR. Now, the vendor tells us that he will not charge us for the delivered goods. Now, what is the correct thing to do in SAP to correct the commitments, GR/IR account etc

  • [Cisco FAQ] - What are the SDV messages logged in the EventLog on the USRM?

    Can you please give me the SDV messages on this EventLog?