Never seen this error before - video importing

Hello -
I am trying to import 130 min movie from FCP into iDVD4 and am receiving an error in iDVD that I've never gotten before, "Unsupported file type: invalid video."
The way I'm doing the import and the way I have always done it without issue, is:
1. FCP > Export > QT movie
2. QT > open FCP QT file > save as > rename file > it becomes a QT file
3. iDVD > Import > video > import the QT file
(so am not making it self-contained)
I tried importing other QT files into the iDVD project, and they work fine. So I think it must be something with the FCP 130 movie, but unsure what it is?
Many thanks,
April

I am trying to import 130 min movie from FCP into iDVD4 and am receiving an error in iDVD that I've never gotten before, "Unsupported file type: invalid video."
Just curious ..... How did you manage to import 2 hours and 10 mins. of QT Playback into iDvd4? The application (iDvd4) simply isn't designed for this much QT playback ....

Similar Messages

  • Never seen this happen before, have you?

    Hi everyone,
    I have never seen this happen before, were I edit a segment of video about 2 minutes long, I render it out and afterwards the clips in my edit change completely to something different. It takes footage from the same tape and replaces my clips with random clips.
    Does anyone know what is happening and how to fix it.
    I have just erased and installed a fresh copy of OSX and all my programs have been newly installed, hoping it would resolve this issue.
    I could really use someones opnion.
    Thank you in advance for all your help

    Only thing I though of was deleting the clips, renaming the timeline, moving the entire project onto a new harddrive and erasing all the render files.
    If this does not work I am going to toss my MAC out the window!

  • Anyone seen this error before:

    02:45:43 ***Error Occured in BUILD_DRIVER: Failed to Build(Refresh) EASYDWAW Analytic Workspace. In __XML_ADJ_OBJ_LIST: You provided extra input starting at '$'.

    I've seen this error before.
    It happens when there's something with mappings.

  • "Pipe Endpoint Error" - Never Saw This Error Before

    Hello -
    I'm getting a strange error from within Data Tools whenever I try to test my SSRS report which i'm developing, i've never seen this before -
    "The pipe endpoint 'net.pipe://localhost/PreviewProcessingService6268/ReportProcessing' could not be found on your local machine"
    Can someone tell me what this means and how to fix it?  I'm not finding much about it online. 
    Thanks

    Hi AvenueStuart,
    According to the error message, the issue can be caused by Net.Pipe Listener Adapter Windows service is not started or the SPN for the report server is not registered when Kerberos authentication is enabled. So, to fix this issue, please refer to the following
    tips:
    Start the Net.Pipe Listener Adapter services.
    1. Press WinKey+R , input “services.msc” in the Run box, and press enter.
    2. In the local services list, find the “Net.Pipe Listener Adapter”. If it is stopped, start it. If it is started, restart it.
    Please run the following command to register a Service Principal Name (SPN) for a Report Server:
    Setspn -s http/<computername>.<domainname>:<port> <domain-user-account>
    References:
    Similar issue
    Register a Service Principal Name (SPN) for a Report Server
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Never seen this one before. . . hopefully you have.

    Hey guys,
    Wondering if anyone has seen this before -
    Just a second ago I opened up a Logic session to start a mix. The tracks were recorded in PT HD, consolidated, and imported into Logic 8. I started playing the mix back and hit Command = to open up the mixer (i use PT commands in Logic) and everything all of the sudden slowed down and sounded like someone had dropped a bunch of springs on the floor or something.
    An error message came up saying "Error while trying to synchronize audio and MIDI. Sample rate of 22437 recognized." I shut off Logic, did not save, restarted my computer, opened the session again, and right when I hit my key command to open the mixer, that sound occurred and I got the same error message. However, if I click the Mixer tab, the sound doesn't occur and I don't get the error message, only when I use my key command.
    The tracks were recorded at 88.2/24 and imported into the session at 88.2/24, and yes, the sample rate of the session matches the sample rate of the tracks. And yes, all of my gear is clocked to 88.2 at the moment.
    Anyone have any ideas? Anyone seen this before?

    Strange, have you checked for doubled key commands?
    Logic defaults to "set locators by region/events" perhaps the key commands file has been corrupted.
    probably have already checked this.
    pancenter-

  • Never seen this one before - Bouncing Video

    I just brought in some footage and the entire video is bouncing as if the camera was on a spring.  When I open the footage in Quicktime or other players, there is no bounce. The camera was on a secure stand in a studio and other files shot around the same time are fine.  Could the update this morning have anything to do with this?

    Hi bbuie1:
    I'm uncertain on some of the details of your issue here, but I'm not familiar with this kind of problem. What is the source of your footage? You state that you "brought in some video footage that was already in the library that comes earlier in movie." But what kind of camera or export source did you use to create the media? This would help to diagnose the issue.
    In addition, you note your sequence settings:
    "My sequence settings are
    Desktop
    25fps
    720 480
    Square 1.0
    No fields Progressive
    I-Frame Only MPEG"
    This is an odd size for 25fps, as 720x480 is usually associated with NTSC .9 pixel aspect ratio. Nonetheless, you shouldn't be seeing bouncing in the timeline. As I noted in my response below to Ann, playback of H.264-based material can result in some artifacting if the Playback Resolution is set to less than the Full setting. Is your source material using the H.264 codec? It won't play back in QT player if it is from an AVCHD device. If it is a DSLR, perhaps it is from a device we have not tested ourselves.
    As to why the issue doesn't occur once the file is rendered: per your stated sequence settings, we render previews in an I-Frame Only MPEG codec, which makes for smoother playback than H.264 (hence my guess above).
    Any details would be helpful in trying to provide an answer, but take a look at the Playback settings, and see if Full Resolution does not resolve the issue for you.
    -- Andy
    -- Premiere Pro Team

  • I've never seen this problem before!

    When I start my half-life/counter-strike application, i hear the music and sound-effects of the opening, but there is nothing at all displayed on the screen.  This happened right after I switched my monitor to a flatscreen.  I'm not sure if the resolution/refresh is incorrect so it can't display or what, but i need help.  Reinstalling did nothing.  To clarify, I reinstalled directX, the video drivers, and the game.  I have this problem with definitely one other game and maybe others (Axis and Allies doesnt work in the same way haha).  And my computer is probably not simply "screwed" either, so thanks in advance if that was the advice you were going to give excited

    A flatscreen or an LCD? It's amazing how many folks get those confused.
    If it's an LCD, make sure the Hertz setting in the game (if it has one) does not exceed the Hertz limit of the monitor. I had this happen at work one time when I had my monitor switched out for an LCD. The game we played at lunch was set to 800x600 mode with a Hertz rate that exceeded the max for the LCD. It had the same effect you are describing - went blank every time but I could hear the start up music playing.
    Hope this helps.

  • Seen this error before?

    Hello.
    I'm seeing the attached error (addSync) in WAS. It doesn't seem to be happening consistently though. Does anyone have any suggestions?
    Thanks,
    Craig<br><br> <b> Attachment: </b><br>addSync_error.log <br> (*To use this attachment you will need to rename 92.bin to addSync_error.log after the download is complete.)

    Is it possible that the transaction times out and gets marked for rollback?
    Alex Gleyzer
    Tangosol, Inc.

  • Anyone seen this error before in Applet Viewer?

    I was trying to run an application that runs fine in a web browser but this is what happens if I try to run it using the AppletViewer.
    This is how I was running the program:
    C:\AppletViewer MyApp.htm
    Exception in thread "main" java.util.MissingResourceException: Can't find resource for bundle sun.applet.resources.MsgAppletViewer, key appletpanel.badattribute.exception
    at java.util.ResourceBundle.getObject(ResourceBundle.java:314)
    at java.util.ResourceBundle.getString(ResourceBundle.java:274)
    at sun.applet.AppletMessageHandler.getMessage(AppletMessageHandler.java:39)
    at sun.applet.AppletPanel.showAppletStatus(AppletPanel.java:701)
    at sun.applet.AppletPanel.init(AppletPanel.java:185)
    at sun.applet.AppletViewer.<init>(AppletViewer.java:175)
    at sun.applet.StdAppletViewerFactory.createAppletViewer(AppletViewer.java:80)
    at sun.applet.AppletViewer.parse(AppletViewer.java:1062)
    at sun.applet.AppletViewer.parse(AppletViewer.java:996)
    at sun.applet.Main.run(Main.java:138)
    at sun.applet.Main.main(Main.java:80)
    Thanks for your help.

    There are bugs about it in the Bug Parade. One of them is http://developer.java.sun.com/developer/bugParade/bugs/4525609.html. The problem appears to be that appletviewer doesn't handle problems in the width/height attributes of the <applet> tag.

  • What's going on? When I type a title on my new Pages document, iwork is substituting a hyphen for the colon I want! Have never seen this one before. How do I correct this imposition? I have the 10.6.8 OS and Pages'09.

    What's going on? When I type the title of my new Pages document, iwork is substituting a hyphen for the colon I want. This is bizarre! How do I make my computer do my thing vs its thing? I have Pages '09.

    Colons are used by the operating system so can't be used in file names.

  • Never seen this message before with Comenity CLI

    So as a routine, I periodically look for SP credit line increases and on both my Victoria's Secret and Express I got this message:
    Thank you for your interest in a credit limit increase. To complete your request, we need more information. Please call the Customer Care team at 1-800-201-4955 (TDD/TTY: 1-800-695-1788) at your earliest convenience.

    Anewvogue wrote:
    So as a routine, I periodically look for SP credit line increases and on both my Victoria's Secret and Express I got this message:
    Thank you for your interest in a credit limit increase. To complete your request, we need more information. Please call the Customer Care team at 1-800-201-4955 (TDD/TTY: 1-800-695-1788) at your earliest convenience.I just got the same message on my account. If you have a fraud alert or comenity *THINKS* you have a fraud alert, that could be one reason. I've been fighting them for a month just to get a replacement card, they are using a stale report for me as I formerly had an alert on my CRs, but it's been removed since late spring. 

  • Never seen this message before in disk utility after repair perm

    as an idiot I did th enew update and repaired permission hoping that that long hang up would go away and now it said this
    Repairing permissions for “Macintosh HD”
    2008-02-18 22:27:46 -0500: ACL found but not expected on "Applications/Utilities".
    2008-02-18 22:27:46 -0500: ACL found but not expected on "Applications".
    2008-02-18 22:27:46 -0500: ACL found but not expected on "Library".
    2008-02-18 22:27:49 -0500:
    2008-02-18 22:27:49 -0500: Permissions repair complete
    2008-02-18 22:27:49 -0500:

    Reinstall the 10.5.2 COMBO update and repair permissions. That should fix things. Alternatively, search these forums for ACL, sort by date, and read the responses and the article Apple posted three months ago: http://docs.info.apple.com/article.html?artnum=306925

  • HT4759 I have icloud on my Ipad and today it says iCloud backup this ipad hasn't been backed up in 2 weeks. Backups happen when this iPad is plugged in,locked, and connected to Wi-Fi. click OK .  well, I have never seen this message before and have had it

    I have icloud on my Ipad and today it says icloud backup this ipad hasn't been backed up in  weeks.Backups happen when this ipad is plugged in,locked, and connected to WiFi. Then OK, well, it will not let me OK it and or get on any of my icons. Like it is frozen. Nothing is on my screen (no icons) and it won't let me unlock it. I have cut it off, then back on and that didn't work. So, I need help.

    Welcome to Apple Support Communities
    Hold Sleep and Home buttons for 10 seconds until the device restarts, so you will be able to use the iPad again

  • IPod is disabled connect to iTunes? Have never seen this message before

    iPod seems to be frozen

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I am getting this error when I open Firefox after DLing Firefox 5 (never seen this in any other previous version): FATAL ERROR : The dynamic C library contained in the extension file could not be found.

    Hi there,
    I'm getting this error when opening Firefox 5:
    FATAL ERROR : The dynamic C library contained in the extension file could not be found.
    I've never seen this error before... First time it happened was immediately after DLing Firefox 5 yesterday. I haven't DLed or installed anything else recently.
    I see that you already have my system info. Any help is much appreciated!

    Just read in another post that there is a known 49 character limit on the file path for QuickTime movies..

Maybe you are looking for