Never seen this one before. . . hopefully you have.

Hey guys,
Wondering if anyone has seen this before -
Just a second ago I opened up a Logic session to start a mix. The tracks were recorded in PT HD, consolidated, and imported into Logic 8. I started playing the mix back and hit Command = to open up the mixer (i use PT commands in Logic) and everything all of the sudden slowed down and sounded like someone had dropped a bunch of springs on the floor or something.
An error message came up saying "Error while trying to synchronize audio and MIDI. Sample rate of 22437 recognized." I shut off Logic, did not save, restarted my computer, opened the session again, and right when I hit my key command to open the mixer, that sound occurred and I got the same error message. However, if I click the Mixer tab, the sound doesn't occur and I don't get the error message, only when I use my key command.
The tracks were recorded at 88.2/24 and imported into the session at 88.2/24, and yes, the sample rate of the session matches the sample rate of the tracks. And yes, all of my gear is clocked to 88.2 at the moment.
Anyone have any ideas? Anyone seen this before?

Strange, have you checked for doubled key commands?
Logic defaults to "set locators by region/events" perhaps the key commands file has been corrupted.
probably have already checked this.
pancenter-

Similar Messages

What's going on? When I type a title on my new Pages document, iwork is substituting a hyphen for the colon I want! Have never seen this one before. How do I correct this imposition? I have the 10.6.8 OS and Pages'09.

What's going on? When I type the title of my new Pages document, iwork is substituting a hyphen for the colon I want. This is bizarre! How do I make my computer do my thing vs its thing? I have Pages '09.

Colons are used by the operating system so can't be used in file names.

Never seen this one before - Bouncing Video

I just brought in some footage and the entire video is bouncing as if the camera was on a spring. When I open the footage in Quicktime or other players, there is no bounce. The camera was on a secure stand in a studio and other files shot around the same time are fine. Could the update this morning have anything to do with this?

Hi bbuie1:
I'm uncertain on some of the details of your issue here, but I'm not familiar with this kind of problem. What is the source of your footage? You state that you "brought in some video footage that was already in the library that comes earlier in movie." But what kind of camera or export source did you use to create the media? This would help to diagnose the issue.
In addition, you note your sequence settings:
"My sequence settings are
Desktop
25fps
720 480
Square 1.0
No fields Progressive
I-Frame Only MPEG"
This is an odd size for 25fps, as 720x480 is usually associated with NTSC .9 pixel aspect ratio. Nonetheless, you shouldn't be seeing bouncing in the timeline. As I noted in my response below to Ann, playback of H.264-based material can result in some artifacting if the Playback Resolution is set to less than the Full setting. Is your source material using the H.264 codec? It won't play back in QT player if it is from an AVCHD device. If it is a DSLR, perhaps it is from a device we have not tested ourselves.
As to why the issue doesn't occur once the file is rendered: per your stated sequence settings, we render previews in an I-Frame Only MPEG codec, which makes for smoother playback than H.264 (hence my guess above).
Any details would be helpful in trying to provide an answer, but take a look at the Playback settings, and see if Full Resolution does not resolve the issue for you.
-- Andy
-- Premiere Pro Team

TS1702 iBooks won't load PDF files any more on my Ipad2. Anybody seen this one before?

Hello All,
iBooks won't load PDF files any more.
I have a lot of PDF files so I thought I reached a maximum number of files or space so I deleted a lot of old files but this did not help.
I rebooted, synced, updated, restarted, etc. - everything that I can think of and I still have the same problem.
I don't remembered the last file that I loaded into iBooks, as I usually put them into collections.
I can still load PDF files into other applications like PDF Reader, but I prefer to have them all in iBooks.
Anybody seen this one before?
I have 64GB iPad2 and I have over 14GB free space.

There have been several threads on this topic over the last few weeks. It's not clear what the issue is, and it is not universal, but tend to effect users storing large numbers of PDFs in iBooks. Possible it has some thing to dowith capacity of the app, or specific characteristics of some of the PDFs.
You might have a look at the "More Like This" list to the left of this page.

Never seen this happen before, have you?

Hi everyone,
I have never seen this happen before, were I edit a segment of video about 2 minutes long, I render it out and afterwards the clips in my edit change completely to something different. It takes footage from the same tape and replaces my clips with random clips.
Does anyone know what is happening and how to fix it.
I have just erased and installed a fresh copy of OSX and all my programs have been newly installed, hoping it would resolve this issue.
I could really use someones opnion.
Thank you in advance for all your help

Only thing I though of was deleting the clips, renaming the timeline, moving the entire project onto a new harddrive and erasing all the render files.
If this does not work I am going to toss my MAC out the window!

I recently got an IMacSnow(G4) and installed a larger HD. When I try to load 10.4 it gives me a message: "You must update your computer's firmware before installing MacOS". Never saw this one before. What gives?

I recently bot an IMac Snow G4 and installed a 40G HD. It has 640 mem. When I try to load Tiger, I got a msg: "You must update your computer's firmware before installing Mac OS". Never saw this one before. What gives?

Hi, is this a G4 Lampshade iMac, or a G3 Snow iMac?
http://www.everymac.com/systems/apple/imac/specs/imac_600_graphite.html
http://en.wikipedia.org/wiki/IMac_G4
Anyway, you'll need OS9 installed to do the Firmware install...
http://support.apple.com/kb/DL1283
http://support.apple.com/kb/HT1395?viewlocale=en_US

HT1351 My phone is not synching with itunes to upload recently downloaded music as well as a new playlist I created. I have never had this issue before. I have rebooted both comuter and iphone. Any suggestions...

I recently downloaded some new music from the itunes store and created a new playlist. My phone will not sync with either the new music or playlist, this has never been an issue before. I have rebooted both my comuter and my phone.

Why is it not syncing?
Any errors?
Is the device detected in iTunes?

You Ain't Seen This One Before

Apple just replaced my 40gig iPod (for the 4th or 5th time, I lost count). Each time they send me a new iPod I just do a software Restore and then Update with the music in iTunes. Not this time. Every 10 or 20 songs it stops Updating and there's an error message with my name in it: "Attempting to copy to the disk 'Jeff Linder' failed. An unknown error occurred (-69)." Anybody know what this is about? Thanks, Jeff

This is a cautionary tale. Wherever you keep your music files, on whatever drive you use, be it your computer's internal hard drive or an external drive, BACK IT UP. If you have an iPod you often have between 5 and 60gigs of music, video, pictures, books, Podcasts, etc. stored. That's a ton of stuff you accumulate during the life of your iPod or the life of more than one iPod. If the drive dies (and, believe me, drives, like everything else, die) all of that stored information you have worked long and hard to acquire will be gone. Gone. Gone. Mine is. It will take me a very long time to build my files again and they will never be quite what I have collected and bought. So, BACK IT UP, BACK IT UP, BACK IT UP. Thanks for your response. -Jeff

Illustrator error message - anyone seen this one before?

Hi there,
I was merrily working on my logo yesterday in CS4, saved it as an .ai file, closed it down and now today when I go to open it I get this:
"acrobat pdf file format is having difficulties. Object label badly formatted."
Has anyone seen this before and have a way of fixing it? I went to my backups and they are all the same, not sure what else to do!!
Thanks in advance for any help you can offer.

Check this out.
http://forums.adobe.com/message/2258412?tstart=0#2258412
Basically it's a problem with Suitcase Fusion.

Never seen this message before with Comenity CLI

So as a routine, I periodically look for SP credit line increases and on both my Victoria's Secret and Express I got this message:
Thank you for your interest in a credit limit increase. To complete your request, we need more information. Please call the Customer Care team at 1-800-201-4955 (TDD/TTY: 1-800-695-1788) at your earliest convenience.

Anewvogue wrote:
So as a routine, I periodically look for SP credit line increases and on both my Victoria's Secret and Express I got this message:
Thank you for your interest in a credit limit increase. To complete your request, we need more information. Please call the Customer Care team at 1-800-201-4955 (TDD/TTY: 1-800-695-1788) at your earliest convenience.I just got the same message on my account. If you have a fraud alert or comenity *THINKS* you have a fraud alert, that could be one reason. I've been fighting them for a month just to get a replacement card, they are using a stale report for me as I formerly had an alert on my CRs, but it's been removed since late spring.

HT4759 I have icloud on my Ipad and today it says iCloud backup this ipad hasn't been backed up in 2 weeks. Backups happen when this iPad is plugged in,locked, and connected to Wi-Fi. click OK . well, I have never seen this message before and have had it

I have icloud on my Ipad and today it says icloud backup this ipad hasn't been backed up in weeks.Backups happen when this ipad is plugged in,locked, and connected to WiFi. Then OK, well, it will not let me OK it and or get on any of my icons. Like it is frozen. Nothing is on my screen (no icons) and it won't let me unlock it. I have cut it off, then back on and that didn't work. So, I need help.

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts, so you will be able to use the iPad again

IPod is disabled connect to iTunes? Have never seen this message before

iPod seems to be frozen

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

When I open my computer I receive the following message: The procedure entry point sqlite3_wal_checkpoint couldnot be located in the dynamic link library SQLite3.dll How can this be corrected? I never got this message before and I have a iPhone and iPad

When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Never seen this error before - video importing

Hello -
I am trying to import 130 min movie from FCP into iDVD4 and am receiving an error in iDVD that I've never gotten before, "Unsupported file type: invalid video."
The way I'm doing the import and the way I have always done it without issue, is:
1. FCP > Export > QT movie
2. QT > open FCP QT file > save as > rename file > it becomes a QT file
3. iDVD > Import > video > import the QT file
(so am not making it self-contained)
I tried importing other QT files into the iDVD project, and they work fine. So I think it must be something with the FCP 130 movie, but unsure what it is?
Many thanks,
April

I am trying to import 130 min movie from FCP into iDVD4 and am receiving an error in iDVD that I've never gotten before, "Unsupported file type: invalid video."
Just curious ..... How did you manage to import 2 hours and 10 mins. of QT Playback into iDvd4? The application (iDvd4) simply isn't designed for this much QT playback ....

I've never seen this problem before!

When I start my half-life/counter-strike application, i hear the music and sound-effects of the opening, but there is nothing at all displayed on the screen. This happened right after I switched my monitor to a flatscreen. I'm not sure if the resolution/refresh is incorrect so it can't display or what, but i need help. Reinstalling did nothing. To clarify, I reinstalled directX, the video drivers, and the game. I have this problem with definitely one other game and maybe others (Axis and Allies doesnt work in the same way haha). And my computer is probably not simply "screwed" either, so thanks in advance if that was the advice you were going to give excited

A flatscreen or an LCD? It's amazing how many folks get those confused.
If it's an LCD, make sure the Hertz setting in the game (if it has one) does not exceed the Hertz limit of the monitor. I had this happen at work one time when I had my monitor switched out for an LCD. The game we played at lunch was set to 800x600 mode with a Hertz rate that exceeded the max for the LCD. It had the same effect you are describing - went blank every time but I could hear the start up music playing.
Hope this helps.

Never seen this one before. . . hopefully you have.

Similar Messages

Maybe you are looking for