Never transferred my website from mobile me

Multiple issues here... some i'm sure... very obvious...apologize ahead of time for being completely in the dark in the new I cloud changeover.
1. Never transferred my website to I cloud... Is it gone forever?
2. My original hardware that I created the website on, was stolen, so I was never able to edit the website, because I never figured out how to access the site from my new mac book pro anyway.
3. From aperture, I would publish a proofing page to mobile me for photo clients to look at proofs... can I still do that through I cloud?
4. my current operating system is 10.6.8.. do I need to upgrade, update, to access i cloud?

Everything on MobileMe has been deleted, I'm afraid.
iCloud does not provide website hosting: you will need to find another service - there are plenty to choose from.
If you could publish a proofing page to MobileMe you can do it to another hosting service (though as said, not iCloud).
Snow Leopard cannot access most of iCloud's facitlities - the situation is explained in this page:
iCloud and Snow Leopard
but none of that is relevant to your question as there is no website hosting. If Aperture has been working fine in Snow Leopard there is no reason why it shouldn't go on working - publishing to another service is perfectly straightforward.

Similar Messages

Website connected to Mobile Me, never transferred over to i cloud

Multiple issues here... some i'm sure... very obvious...apologize ahead of time for being completely in the dark in the new I cloud changeover.
1. Never transferred my website to I cloud... Is it gone forever?
2. My original hardware that I created the website on, was stolen, so I was never able to edit the website, because I never figured out how to access the site from my new mac book pro anyway.
3. From aperture, I would publish a proofing page to mobile me for photo clients to look at proofs... can I still do that through I cloud?
4. my current operating system is 10.6.8.. do I need to upgrade, update, to access i cloud?

Since you didn't import the pictures into iPhoto, but merely viewed them while they were on the iPhone, then they are definitely not on your mac. Since you deleted them from the iPhone, they're gone. You didn't by any chance set up Photo Stream? If so, have you looked at the Photo Stream folder in iPhoto?

Open website in mobile version

How can I prevent Safari opening the website from mobile version? Thanks!

You can't, it's not one of the settings that you can change. Other browsers do have settings that allow them to identify themselves as something else (Internet Exploter, desktop Safari, Firefox etc e.g. Atomic Web (http://itunes.apple.com/us/app/atomic-web-browser-browse/id347929410?mt=8), and iCab might as well (http://itunes.apple.com/us/app/icab-mobile-web-browser/id308111628?mt=8# - not entirely sure as I havn't got iCab)

I switched to iCloud today and my contacts from Mobil me did not transfere to I Cloud can't get back into Mobil me to retrive them how do I get them?

Switched to iCloud from Mobil Me today and my contacts did not transfere over I want my contacts what do I do?

According to the trms of the iTunes and app stores - all sales are final. but that doe not mean that you can't try anyway. People ask for refunds all the time. Use the Express Lane email to contact iTunes.
http://www.apple.com/support/itunes/contact/
You can still download the other movies in iTunes on your computer. Launch iTunes and go to Store>Check for Available Downloads. You can download them in iTunes and then sync them to the iPad later. When you are done watching the first movie, you can transfer it into iTunes on your computer, delete it from the iPad and you will have the room for another movie on the device. To transfer the movie when you are done with it, you can use the transfer purchases feature.
Transfer purchases.
http://support.apple.com/kb/HT1848
If the photos that you lost were photos that you took with the iPad, they should be in your iPad backup - if you sync with iTunes or if you backup with iCloud.
How to backup and about iOS backups
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT4946

I use the Strava website frequently but it requires me to restart in 32bit mode when transferring ride info from my Garmin 305. Any way around this?

As I stated in the question... I use Strava.com website quite a bit, but when transferring ride info from my Garmin 305 it requires me to restart Firefox in 32bit mode. Is there any way around this? It can be frustrating to be working in one window and have to restart the whole browser when uploading ride data.
Thanks for the help,
Rick

are your brush libraries stored in Adobe Illustrator CXX\Presets\en_US\Brushes?
is 'Persistent' checked in the drop down menu for each brush library when you have it open?

As a Buyer, Paying from Website is ok but "transaction refused' from Mobile app

Hi,
as a Buyer, When paying from website is ok but 'transaction was refused' from Mobile App.
Error Code: 08-07 01:09:24.650 17721-18251/----------------------/paypal.sdk﹕ request failure with http statusCode:400,exceptionrg.apache.http.client.HttpResponseException: Bad Request
08-07 01:09:24.650 17721-18251/-----------------------------------/paypal.sdk﹕ request failed with server response:{"name":"TRANSACTION_REFUSED","details"],"message":"The request was refused","information_link":"https://developer.paypal.com/webapps/developer/docs/api/#TRANSACTION_REFUSED","debug_id":"8c6e3fef7b2a2"} Pls let me know, why this is happening.... Buyer's My paypal currency : EURO

1) Repost (copying from your original source, NOT from your first post here) using the CODE button or [code] and [/code] tags so that your code will be readable.
2) Provide details about what "doesn't work" means.

Mac Safari open website in mobile version sometimes, such as GoogleTranslate. How to solve it

Sometimes Mac Safari open website in mobile version, such as GoogleTranslate. How to solve it?
I use iPhone and iPad as well, but I never open google translate page using safari both on iPhone and iPad. Just use the GoogleTranslate App sometimes.
Why does my Mac Safari open google translate page in mobile version for no reason?

If you use iCloud to synchronize Safari with a mobile device, you may be opening a bookmark to the mobile version of the site. Another possibility is that you're getting a Handoff activity from the device.
Remove everything from the URL except the domain name and try again. For instance, if the URL is something like this:
http://www.example.com/mobile
or
http://mobile.example.com
change it to this:
http://www.example.com

How can I view original websites not mobile versio...

Is there anyway to view original websites not mobile versions websites on N97?

Some mobile phone networks implement something called a transparent proxy. No inherently a bad idea, but in this particular instance it is a bit annoying.. Basically it intercepts your web traffic and "optimises" it for mobile clients. This is actually fairly nice for crummier phones that perhaps can't cope with complex HTML or large images (or flash)
As radical said, some sites however are optimised themselves.. The website will serve different content when it detects that the client (in this case, your phone) is a mobile device or if the client is coming from a mobile network company (rare, but happens) .. Also helpful.. I think Orange in the UK may intercept graphics files and reduce re-compress them into smaller versions..but I've never tested/looked into it closely enough to know for sure
The first you may be able to do something about. Some phone networks have an "opt-out" facility. This may be a slightly different APN. Not all networks offer it, so your milage may vary.
The second is out of your control, unless you get some freaky browser for the N97 that can pretend to be a desktop (a bit like Opera can pretend to be IE)
I'm lead to believe that the chances of doing anything about it are fairly slim if you happen to suffer from the problem

Help! I transferred the data from my old Macbook pro with some success, but now my new Macbook Air contents think they are the remote disc and that the old Mac Pro is the hard drive. What did I do and how do I fix it?

I transferred the data from my old 2006 MacBook Pro 17". Thanks for the help on that. I thought that I was doing it right. Used a backup hard drive and time machine. Problem: Now my new macbook air thinks it is the old machine and that the remote disc is the mb air. Clicks want to take things to mobile me instead of iCloud, old applications launch instead of the new ones. How do I fix the mess I have made? Like I said before, I am a software user and don't really know what I am doing when I start into the guts of the software, but I am able to learn. Thanks for any help.

iTunes- How to move the library to an EHD
After you move the library you need to open iTunes by first depressing the OPTION key then launching iTunes. You will be given a choice of which library to use. This can then be made a permanent change, if you wish, in the Advanced section of iTunes preferences.

[Flex 4.5.1] What is the best way of adopting a flex built website for mobile "as is"?

What is the best way of adopting a flex 4.5.1 built website for mobile "as is"?
I have a website built with flex 4.5.1 which I want to be working on mobile as it should - meaning that touch style of interactions should be working not mouse.
The question is: Do I HAVE TO recode all of my website from Application into Mobile Application in order to be a more lightweight version of the original one, which includes: remove some functionality, pages, animation, build a separate backend and cms to control it etc.?
OR
Can I just define mobile skins, for my existing components to use when in mobile mode, in which I could have done some tweaking by removing some unnecessary parts and changing component interactionMode to Touch ?
Are both options which I see possible and if yes - which one would you recommend?
Thanks in advance!

Thanks for the answer. Yeah I bet you figured out what I want the answer to be, but is it ? That's why I am asking here. I can see my website on my HTC Desire HD and it's working pretty well. If I reskin the parts that need a bigger hit area or the scrollers to work with touch so I don't have to scroll the actual scrollbars with my finger, remove some complex animations - everything will work just fine... The problem is that I am not sure if that is the right way to do it or if it is possible at all.
I do get your point about not designed for mobile stuff, but while with html 5 you get the job done for web and mobile with little differences at the same time, in flash you need double time cause you'll have to build 2 projects. And since the framework is one for both web and mobile.. why not...
I want to see the pros and cons of the both approaches I suggested. In a complex modular architecture I could easily swap one web module with a mobile module for example or change skins or components if I need more lightweight ones, but do I have to copy all that logic in to a MobileApplication, can't I do it with Application and use the MobileComponents (which are simplier and less functional) if the project actually needs them...
I do hope you get why I am asking these questions, and I can't believe I haven't found a guide or something like that "why this and not that" when it comes to mixing web with mobile development and flex... If you have, please share the link, I would be happy to read. Or someone with the experience in what I am talking about shares some knowledge, that would be great!
Thanks.

Invalid MIC from Mobile Device

Hello guys,
i have two media tablets same hardware same driver. One is working proper and the other one is not able to associate with my ssid.
the debug out shows the follow:
*dot1xMsgTask: Feb 06 14:51:25.007: a8:54:b2:00:8b:34 Starting key exchange to mobile a8:54:b2:00:8b:34, data packets will be dropped*dot1xMsgTask: Feb 06 14:51:25.007: a8:54:b2:00:8b:34 Sending EAPOL-Key Message to mobile a8:54:b2:00:8b:34 state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00*Dot1x_NW_MsgTask_4: Feb 06 14:51:25.027: a8:54:b2:00:8b:34 Received EAPOL-Key from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:25.027: a8:54:b2:00:8b:34 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:25.027: a8:54:b2:00:8b:34 Received EAPOL-key in PTK_START state (message 2) from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:25.027: a8:54:b2:00:8b:34 Received EAPOL-key M2 with invalid MIC from mobile a8:54:b2:00:8b:34 version 2*osapiBsnTimer: Feb 06 14:51:26.173: a8:54:b2:00:8b:34 802.1x 'timeoutEvt' Timer expired for station a8:54:b2:00:8b:34 and for message = M2*dot1xMsgTask: Feb 06 14:51:26.173: a8:54:b2:00:8b:34 Retransmit 1 of EAPOL-Key M1 (length 121) for mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:26.257: a8:54:b2:00:8b:34 Received EAPOL-Key from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:26.257: a8:54:b2:00:8b:34 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:26.257: a8:54:b2:00:8b:34 Received EAPOL-key in PTK_START state (message 2) from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:26.257: a8:54:b2:00:8b:34 Received EAPOL-key M2 with invalid MIC from mobile a8:54:b2:00:8b:34 version 2*osapiBsnTimer: Feb 06 14:51:27.173: a8:54:b2:00:8b:34 802.1x 'timeoutEvt' Timer expired for station a8:54:b2:00:8b:34 and for message = M2*dot1xMsgTask: Feb 06 14:51:27.173: a8:54:b2:00:8b:34 Retransmit 2 of EAPOL-Key M1 (length 121) for mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:27.197: a8:54:b2:00:8b:34 Received EAPOL-Key from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:27.197: a8:54:b2:00:8b:34 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:27.197: a8:54:b2:00:8b:34 Received EAPOL-key in PTK_START state (message 2) from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:27.197: a8:54:b2:00:8b:34 Received EAPOL-key M2 with invalid MIC from mobile a8:54:b2:00:8b:34 version 2*osapiBsnTimer: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 802.1x 'timeoutEvt' Timer expired for station a8:54:b2:00:8b:34 and for message = M2*dot1xMsgTask: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 Retransmit failure for EAPOL-Key M1 to mobile a8:54:b2:00:8b:34, retransmit count 3, mscb deauth count 2*dot1xMsgTask: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 Resetting MSCB PMK Cache Entry 0 for station a8:54:b2:00:8b:34*dot1xMsgTask: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 Removing BSSID 34:db:fd:67:89:2a from PMKID cache of station a8:54:b2:00:8b:34*dot1xMsgTask: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 Setting active key cache index 0 ---> 8*dot1xMsgTask: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 Sent Deauthenticate to mobile on BSSID 34:db:fd:67:89:20 slot 1(caller 1x_ptsm.c:546)
config of the SSID:
(Cisco Controller) >show wlan 6WLAN Identifier.................................. 6Profile Name..................................... MedientechnikNetwork Name (SSID).............................. MedientechnikStatus........................................... EnabledMAC Filtering.................................... DisabledBroadcast SSID................................... DisabledAAA Policy Override.............................. DisabledNetwork Admission Control Client Profiling Status ....................... Disabled DHCP ......................................... Disabled HTTP ......................................... Disabled Radius-NAC State............................... Disabled SNMP-NAC State................................. Disabled Quarantine VLAN................................ 0Maximum number of Associated Clients............. 0Maximum number of Clients per AP Radio........... 200Number of Active Clients......................... 1Exclusionlist.................................... DisabledSession Timeout.................................. 86400 secondsUser Idle Timeout................................ 300 seconds--More-- or (q)uitUser Idle Threshold.............................. 0 BytesNAS-identifier................................... KPSS_WLC1CHD per WLAN..................................... EnabledWebauth DHCP exclusion........................... DisabledInterface........................................ medientechnikMulticast Interface.............................. Not ConfiguredWLAN IPv4 ACL.................................... unconfiguredWLAN IPv6 ACL.................................... unconfiguredmDNS Status...................................... DisabledmDNS Profile Name................................ default-mdns-profileDHCP Server...................................... DefaultDHCP Address Assignment Required................. DisabledStatic IP client tunneling....................... DisabledPMIPv6 Mobility Type............................. noneQuality of Service............................... SilverPer-SSID Rate Limits............................. Upstream DownstreamAverage Data Rate................................ 0 0Average Realtime Data Rate....................... 0 0Burst Data Rate.................................. 0 0Burst Realtime Data Rate......................... 0 0Per-Client Rate Limits........................... Upstream DownstreamAverage Data Rate................................ 0 0Average Realtime Data Rate....................... 0 0--More-- or (q)uitBurst Data Rate.................................. 0 0Burst Realtime Data Rate......................... 0 0Scan Defer Priority.............................. 4,5,6Scan Defer Time.................................. 100 millisecondsWMM.............................................. AllowedWMM UAPSD Compliant Client Support............... DisabledMedia Stream Multicast-direct.................... DisabledCCX - AironetIe Support.......................... DisabledCCX - Gratuitous ProbeResponse (GPR)............. DisabledCCX - Diagnostics Channel Capability............. DisabledDot11-Phone Mode (7920).......................... DisabledWired Protocol................................... NonePassive Client Feature........................... EnabledPeer-to-Peer Blocking Action..................... DisabledRadio Policy..................................... AllDTIM period for 802.11a radio.................... 1DTIM period for 802.11b radio.................... 1Radius Servers Authentication................................ Disabled Accounting.................................... Disabled Dynamic Interface............................. Disabled Dynamic Interface Priority.................... wlanLocal EAP Authentication......................... Disabled--More-- or (q)uitSecurity 802.11 Authentication:........................ Open System FT Support.................................... Disabled Static WEP Keys............................... Disabled 802.1X........................................ Disabled Wi-Fi Protected Access (WPA/WPA2)............. Enabled WPA (SSN IE)............................... Disabled WPA2 (RSN IE).............................. Enabled TKIP Cipher............................. Disabled AES Cipher.............................. Enabled Auth Key Management 802.1x.................................. Disabled PSK..................................... Enabled CCKM.................................... Disabled FT-1X(802.11r).......................... Disabled FT-PSK(802.11r)......................... Disabled PMF-1X(802.11w)......................... Disabled PMF-PSK(802.11w)........................ Disabled FT Reassociation Timeout................... 20 FT Over-The-DS mode........................ Enabled GTK Randomization.......................... Disabled SKC Cache Support.......................... Disabled--More-- or (q)uit CCKM TSF Tolerance......................... 1000 WAPI.......................................... Disabled Wi-Fi Direct policy configured................ Disabled EAP-Passthrough............................... Disabled CKIP ......................................... Disabled Web Based Authentication...................... Disabled Web-Passthrough............................... Disabled Conditional Web Redirect...................... Disabled Splash-Page Web Redirect...................... Disabled Auto Anchor................................... Disabled FlexConnect Local Switching................... Disabled flexconnect Central Dhcp Flag................. Disabled flexconnect nat-pat Flag...................... Disabled flexconnect Dns Override Flag................. Disabled FlexConnect Vlan based Central Switching ..... Disabled FlexConnect Local Authentication.............. Disabled FlexConnect Learn IP Address.................. Enabled Client MFP.................................... Disabled PMF........................................... Disabled PMF Association Comeback Time................. 1 PMF SA Query RetryTimeout..................... 200 Tkip MIC Countermeasure Hold-down Timer....... 60AVC Visibilty.................................... Disabled--More-- or (q)uitAVC Profile Name................................. NoneFlow Monitor Name................................ NoneCall Snooping.................................... DisabledRoamed Call Re-Anchor Policy..................... DisabledSIP CAC Fail Send-486-Busy Policy................ EnabledSIP CAC Fail Send Dis-Association Policy......... DisabledKTS based CAC Policy............................. DisabledAssisted Roaming Prediction Optimization......... Disabled802.11k Neighbor List............................ Disabled802.11k Neighbor List Dual Band.................. DisabledBand Select...................................... DisabledLoad Balancing................................... DisabledMulticast Buffer................................. Disabled Mobility Anchor List WLAN ID IP Address Status ------- --------------- ------802.11u........................................ DisabledMSAP Services.................................. Disabled
(Cisco Controller) >show sysinfoManufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 7.4.110.0Bootloader Version............................... 1.0.1Field Recovery Image Version..................... 6.0.182.0Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27Build Type....................................... DATA + WPS
My understanding is that because of the invalid MIC the WLC interpret that the frames are corrupt ?
What could be the problem ?
Thanks for your help !!!!
Kind regards
Philip

802.11n and Apple iPad, Cisco Cius tablet, and Apple iPhone 4
Each Wi-Fi enabled phone and tablet that supports 802.11n has specific antenna and channel configurations. Specifications for each device are listed on the manufacturer's website. Because these devices are 802.11n-enabled, they can use 802.11n enhancements such as MIMO and frame aggregation to help improve their upstream and downstream performance. The specifications for the Apple iPad, Cisco Cius, and Apple iPhone 4 follow:
• The Apple iPad is a one-spatial stream (single antenna) 802.11n-enabled device that operates in 2.4- and 5-GHz spectrums using 20-MHz channels.
• The Cisco Cius tablet is a one-spatial stream (single antenna) 802.11n-enabled device that operates in the 2.4-GHz spectrum using 20-MHz channels and the 5-GHz spectrum using 20- or 40-MHz channels.
• The Apple iPhone 4 is a one-spatial stream 802.11n-enabled device that operates in only the 2.4-GHz spectrum using 20-MHz channels.
How to Optimize 802.11n WLANs to Support Wi-Fi Enabled Phones and Tablets
The following steps are recommended to help optimize a Cisco Unified Wireless Network 802.11n deployment to more effectively support the Apple iPad, Apple iPhone 4, Cisco Cius tablet, and other Wi-Fi phones, tablets, or clients with similar wireless profiles.

Can my iWeb site be downloaded to my new HD from Mobile Me? Old HD died...

My Macbook Pro died unexpectedly. I had not saved my iWeb site on an external. Is there any way the design and content can be downloaded to my new MacBook from Mobile Me? Please tell me I am not destined to recreate the entire site....

Only iWeb's Domain file can be opened in iWeb. See this Apple doc on How to back up MobileMe data. It says:
Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb.
You can manually back up the Domain file, or use Backup to back it up.
Paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWebBackupretrieve.html

I transferred my apps from one Mac to a new one and now my Elements won't open Why?

I transferred my apps from one Mac to a new one and now my Elements won't open Why?

You can never, never transfer an installed copy of PSE. PSE is not a tidy package like most mac apps; the installer strews stuff all over your hard drive and neither you nor the migration assistant can ever hope to find all the necessary bits and pieces.
Now you have kind of a mess to clean up. First download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
It won't seem to do anything, but it's necessary in order for you to be able to successfully manually remove what did get transferred so that you can reinstall PSE.
Then go around and remove all the bits you can find, not only from applications but from your user>library>preferences and especially from hard drive>library>application support. Note that those are two different libraries.
Then you can reinstall PSE from scratch.

Hp office jet: I cannot print from mobile suddenly

While trying to find a way so that my printer only prints in black and white it suddenly stopped printing from mobile. I am able to select the printer on my phone when I try to print, but my actual printer never seemed to receive the job. It says I am connected to my internet, and as I mentioned I can even select the printer. This happened after I changed the ink cartridge and went to test it by printing an email document. I thought it may have been the phone at first, because the document did not load before I selected the print option, and the iPhone I was using is old and glitchy. I tested it again on my iPad, but it still did not work.
I don't know if this is the cause, but I tried to set up eprint. I needed to install my printer on my aunt's computer, but I was missing the disc, so I tried eprint. I pressed the button next the one for wireless settings(between the tower and the wrench) to set it up. I am able to use that service now, but I still can't print directly like before, only with eprint.
I have tried to reset it to factory settings, but that didn't solve the problem. I set up the wireless and tried again, but it still did not work. I can select the printer, but the job never goes through, unless I use eprint.

@kc555
Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
Thank you,
Omar
I Work for HP

How can i undo "never for this website" on iTouch

On my iTouch, i incorrectly selected "never for this website" when entering a website password. is there a way to undo that so i can save the password?

Success! I finally got the save password prompt to return for the website I wanted by ALSO clearing HIstory, Cookies and Cache (from Settings>Safari>Clear...History, Cookies, Cache. This was after clearing the auto-fill as recommended by lllaass above. After clearing the auto-fill, I discovered a stored password was still available at another website so then I tried clearing the other items. - VW49

Never transferred my website from mobile me

Similar Messages

Maybe you are looking for