Never used airport and cannot connect to local network

hi,
i have an imac G5 and I have neverused the airport feature and am now at a location which has one and I can grab the local network name from the pulldown menu, and it asks for the WEP password, and I give it, and then I get a message that says "error connecting to network" or something like that. I tried moving the aiport to the top of the list and unchecking the other options but still to no avail.
help??

The basic problem with WEP, other than it's no longer considered secure, is that it comes in a variety of "flavors" when it comes to accessing it with a password: password/passphrase, 40/128-ASCII key, or 40/128-bit hex key. In a mixed environment, it's best to use 128-bit hex, which would be a 26 hex character key. The WiFi you're trying to connect to may not be set up this way. What did the host for this WiFi tell you the WEP type is?

Similar Messages

  • I don't know much about computers, so please be patient. I started using Airport and I recently noticed a "network" option right below "Macintosh HD". When I click on "network" it shows "b67446000000" with a computer monitor icon and "connection fail

    I don't know much about computers, so please be patient. I started using Airport and I recently noticed a "network" option right below "Macintosh HD". When I click on "network" it shows "b67446000000" with a computer monitor icon and "connection failed". When I right click on this and select "Get more info" it displays nothing, just the spinning wheel. When I select "Connect As" it asked for my password to connect to "Server b67446000000". This may have been on my computer since I got it, I never paid much attention. Is this part of the operating system or has someone hijacked my computer? Why would I need a server...it's just me and my one computer? Maybe someone has hacked in through Airport? Any help will be greatly appreciated. Thanks!

    Is your airport a Time Capsule.. if so it is able to serve files on the network.
    The number is the MAC address of the network in the router.
    Please reset the apple router whatever is and redo the setup.. this time give it a simple name.. eg TCgenX where X is the actual gen of the unit and give it a simple wireless name.. TCwifi and a simple password with 8-20 characters mix of upper and lower case and numbers.
    Perhaps even better give me a screenshot from the computer of the airport utility showing me the Airport with its MAC address.

  • Exchange 2010 Send Connector to postfix (v. 2.11) smarthost uses STARTTLS and cannot connect

    Dear all,
    I am having problems with exchange 2010 sending emails through a postfix smarthost server which disconnects the sessions. I also use a sendmail as a smarthost
    server which is working just fine but I have to switch to postfix and cannot do this as long as the encryption does not work.
    Here is the log file of the postfix server:
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: initializing the server-side TLS engine
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: connect from server1.mydomain.com[192.168.20.10]
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: setting up TLS connection from server1.mydomain.com[192.168.20.10]
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: server1.mydomain.com[192.168.20.10]: TLS cipher list "aNULL:-aNULL:ALL:+RC4:@STRENGTH"
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:before/accept initialization
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1B0] (11 bytes => -1 (0xFFFFFFFFFFFFFFFF))
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1B0] (11 bytes => 11 (0xB))
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0000 16 03 01 00 5a 01 00 00|56 03 01                 ....Z... V..
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1BE] (84 bytes => 84 (0x54))
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0000 54 a9 3d b9 0d 5e 8b 64|7c 6b b5 21 f2 93 e7 84  T.=..^.d |k.!....
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0010 17 ea 33 d7 e5 13 f2 75|3a 87 38 32 01 85 82 5b  ..3....u :.82...[
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0020 00 00 18 00 2f 00 35 00|05 00 0a c0 13 c0 14 c0  ..../.5. ........
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0030 09 c0 0a 00 32 00 38 00|13 00 04 01 00 00 15 ff  ....2.8. ........
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0040 01 00 01 00 00 0a 00 06|00 04 00 17 00 18 00 0b  ........ ........
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0050 00 02 01                                         ...
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0053 - <SPACES/NULLS>
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 read client hello A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write server hello A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write certificate A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write key exchange A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write server done A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: write to 7F4823FA5210 [7F4823FB8B70] (1911 bytes => 1911 (0x777))
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0774 - <SPACES/NULLS>
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 flush data
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAC803] (5 bytes => 0 (0x0))
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:failed in SSLv3 read client certificate A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept error from server1.mydomain.com[192.168.20.10]: lost connection
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: lost connection after STARTTLS from server1.mydomain.com[192.168.20.10]
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: disconnect from server1.mydomain.com[192.168.20.10]
    I
    have read in the post at https://social.technet.microsoft.com/Forums/exchange/en-US/6db38364-cb08-45c0-b159-3ddf30ef0b3e/exchange-2010-send-connector-uses-ssltls-and-cannot-connect-to-smarthost-how-to-deactivate-ssl?forum=exchange2010
    how to deactivate the SSL encryption, but this is of course a security flaw, if I am not mistaken. I would like to encrypt the connection between the servers for obvious security
    reasons but I have come to a standstill...
    My Exchange server certificate is configured
    as follows:
    AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAcc
                         ule, System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKe
                         essRule}
    CertificateDomains : {server1, server1.solid-con.com}
    HasPrivateKey      : True
    IsSelfSigned       : True
    Issuer             : CN=server1
    NotAfter           : 22/01/2017 13:18:02
    NotBefore          : 22/01/2012 13:18:02
    PublicKeySize      : 2048
    RootCAType         : None
    SerialNumber       : 6925D91285B649BD4D5E4297F1A48471
    Services           : IMAP, POP, IIS, SMTP
    Status             : Valid
    Subject            : CN=server1
    Thumbprint         : 939A37173BF84E352CEDC74F7D9A3D71F498A005
    AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAcc
                         ule, System.Security.AccessControl.CryptoKeyAccessRule}
    CertificateDomains : {WMSvc-SERVER1}
    HasPrivateKey      : True
    IsSelfSigned       : True
    Issuer             : CN=WMSvc-SERVER1
    NotAfter           : 19/01/2022 12:56:44
    NotBefore          : 22/01/2012 12:56:44
    PublicKeySize      : 2048
    RootCAType         : Registry
    SerialNumber       : 1DB8711F7ADC5CB54196468EF2FF5D21
    Services           : None
    Status             : Valid
    Subject            : CN=WMSvc-SERVER1
    Thumbprint         : 191D86BDE274510453D58DDB91D253DABBCF05F1
    And My Default Send Connector is configured as follows:
    AddressSpaces                : {SMTP:*;1}
    AuthenticationCredential     : System.Management.Automation.PSCredential
    Comment                      :
    ConnectedDomains             : {}
    ConnectionInactivityTimeOut  : 00:10:00
    DNSRoutingEnabled            : False
    DomainSecureEnabled          : False
    Enabled                      : True
    ErrorPolicies                : Default
    ForceHELO                    : False
    Fqdn                         :
    HomeMTA                      : Microsoft MTA
    HomeMtaServerId              : SERVER1
    Identity                     : Internet
    IgnoreSTARTTLS               : False
    IsScopedConnector            : False
    IsSmtpConnector              : True
    LinkedReceiveConnector       :
    MaxMessageSize               : unlimited
    Name                         : Internet
    Port                         : 25
    ProtocolLoggingLevel         : None
    RequireOorg                  : False
    RequireTLS                   : False
    SmartHostAuthMechanism       : None
    SmartHosts                   : {server7.mydomain.com, server6.mydomain.com}
    SmartHostsString             : server7.mydomain.com,server6.mydomain.com
    SmtpMaxMessagesPerConnection : 20
    SourceIPAddress              : 0.0.0.0
    SourceRoutingGroup           : Exchange Routing Group (DWBGZMFD01QNBJR)
    SourceTransportServers       : {SERVER1}
    TlsAuthLevel                 :
    TlsDomain                    :
    UseExternalDNSServersEnabled : False
    Any help would be greatly appreciated as I am
    stuck...
    Luca

    Hi Allen,
    Thank you very much for your reply.
    The Postfix TLS Manager is enabled in master.cf
    tlsmgr    unix  -       -       n       1000?   1       tlsmgr
    and running
    server7:/etc/postfix # ps -efa|grep tls
    postfix  11967 11863  0 11:21 ?        00:00:00
    tlsmgr -l -t unix -u
    Every other (Linux/UNIX) server has no problem e.g.:
    Jan  5 11:28:36 server7 postfix/smtpd[12215]: connect from server2.mydomain.com[192.168.20.20]
    Jan  5 11:28:36 server7 postfix/smtpd[12215]: Anonymous TLS connection established from server2.mydomain.com[192.168.20.20]: TLSv1 with cipher DHE-DSS-AES256-SHA (256/256 bits)
    Jan  5 11:28:36 server7 postfix/smtpd[12215]: B5502946AB0: client=server2.mydomain.com[192.168.20.20]
    Jan  5 11:28:36 server7 postfix/cleanup[12221]: B5502946AB0: message-id=<[email protected]>
    Jan  5 11:28:36 server7 postfix/qmgr[12200]: B5502946AB0: from=<[email protected]>, size=1026, nrcpt=1 (queue active)
    Jan  5 11:28:36 server7 postfix/smtpd[12215]: disconnect from server2.mydomain.com[192.168.20.20]
    Jan  5 11:28:37 server7 postfix/smtpd[12225]: connect from localhost[127.0.0.1]
    Jan  5 11:28:37 server7 postfix/smtpd[12225]: 4076A946AB1: client=localhost[127.0.0.1]
    Jan  5 11:28:37 server7 postfix/cleanup[12221]: 4076A946AB1: message-id=<[email protected]>
    Jan  5 11:28:37 server7 postfix/qmgr[12200]: 4076A946AB1: from=<[email protected]>, size=1778, nrcpt=1 (queue active)
    Jan  5 11:28:37 server7 postfix/smtpd[12225]: disconnect from localhost[127.0.0.1]
    Jan  5 11:28:37 server7 postfix/smtp[12222]: B5502946AB0: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.54, delays=0.05/0.01/0.01/0.47, dsn=2.0.0, status=sent
    (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 4076A946AB1)
    Jan  5 11:28:37 server7 postfix/qmgr[12200]: B5502946AB0: removed
    Jan  5 11:28:37 server7 postfix/cleanup[12221]: 4401F946AB0: message-id=<[email protected]>
    Jan  5 11:28:37 server7 postfix/qmgr[12200]: 4401F946AB0: from=<[email protected]>, size=1920, nrcpt=1 (queue active)
    Jan  5 11:28:37 server7 postfix/local[12226]: 4076A946AB1: to=<[email protected]>, relay=local, delay=0.02, delays=0/0.01/0/0, dsn=2.0.0, status=sent (forwarded as 4401F946AB0)
    Jan  5 11:28:37 server7 postfix/qmgr[12200]: 4076A946AB1: removed
    Jan  5 11:28:37 server7 postfix/smtp[12227]: Untrusted TLS connection established to 192.168.20.10[192.168.20.10]:25: TLSv1 with cipher AES128-SHA (128/128 bits)
    Jan  5 11:28:37 server7 postfix/smtp[12227]: 4401F946AB0: to=<[email protected]>, orig_to=<[email protected]>, relay=192.168.20.10[192.168.20.10]:25,
    delay=0.29, delays=0/0.01/0.02/0.25, dsn=2.6.0, status=sent (250 2.6.0 <[email protected]> [InternalId=619] Queued
    mail for delivery)
    Jan  5 11:28:37 server7 postfix/qmgr[12200]: 4401F946AB0: removed
    and if you take a look at the lines in bold you will see that mails can be delivered over TLS to that very Exchange server (the mailboxes are on that server)...
    To summarise:
    exchange --> postfix with TLS = session disconnected (and everything seems to be initiated by the exchange server -if I read the logs correctly)
    postfix --> exchange with TLS = works
    any further hints?
    Thank you very much in advance,
    Luca

  • No service. Cannot connect to local networks abroad

    iPhone 6 I've used abroad before ok. Connected to a local network when I got off plane and received ee text about local usage and data packages. Bought a data package then just seeing 'no service' message. Checked roaming and EU settings and all fine. When I put carrier setting off automatic u can see local networks, connect to them but get no service displayed. Plenty of signal and business account which has worked fine before. Rebooted plenty of times. Can anyone help? Thanks

    Hi .
    Thanks for joining the community.
    I have had this before myself and found turning the 4G off got me service.
    Can you try this?
    Also what country are you in?
    Thanks.

  • Hi, i have bought an airport and cannot connect it to my iMac.  please help?

    HI,
    I bought an Imac with Airport Time Capsule but cannot get it connected properly.  Initially I think my IMac detected the Time Capsule when I switched the capsule on.  I then tried to plug the capsule into the router via an Ethernet cable as I read in the instruction manual.   Nothing happened, the amber lights remained amber, rather than going green.
    EVery time i switch the capsule on I only get a flashing amber light - it doesn't seem to detect my wireless broadband at all.
    Now the IMac doesn't even seem to detect the Capsule either,
    Am a bit stuck.
    Any expert guidance would be wonderfully appreciated.
    thanks,
    Mark

    Do a factory reset on the TC.
    Factory reset Gen 5
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.
    Plug the TC Lan port <-> (any of the 3) into the computer by ethernet.
    Turn off the wireless in the computer. So now you have totally isolated the TC and computer.. no other connections to either.
    Run the airport utility again.
    This time do the setup manually by clicking the TC icon and then click the edit at the bottom of the summary.
    Change the TC to bridge mode.
    Setup wireless on the wireless tab as you prefer.. that is not a major issue at this stage but you can make a simple short name.. and of course set security to WPA2 Personal with a 10-20 character passkey.
    Update the TC and then plug it into the main router.

  • Cannot connect to local network while connected with EasyVPN

    Hi All,
    I'm looking on many forums for an answer, but I cannot get it working.
    I have configured EasyVPN with CCP and also with CLI. I had it both working perfect, except the most important thing.
    I can connect with the Cisco VPN client to the router, but i'm not able to connect or even ping a system inside the remote network. My laptop gets an IP address from the address pool of the router.
    I really hope someone can help me before my manager is losing his patience :-)
    Here is my config. (before someone is mentioning it, i have to clean up my config a bit...I mean, look at the acl's )
    Current configuration : 13939 bytes
    ! Last configuration change at 12:26:53 UTC Thu Jan 9 2014 by admin
    version 15.2
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    service sequence-numbers
    hostname Router
    boot-start-marker
    boot-end-marker
    security authentication failure rate 3 log
    security passwords min-length 6
    logging buffered 10240
    logging console critical
    enable secret 4 ********
    aaa new-model
    aaa authentication login local_authen local
    aaa authentication login ciscocp_vpn_xauth_ml_1 local
    aaa authorization exec local_author local
    aaa authorization network ciscocp_vpn_group_ml_1 local
    aaa session-id common
    no process cpu extended history
    crypto pki trustpoint TP-self-signed-********
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-********
    revocation-check none
    rsakeypair TP-self-signed-********
    crypto pki certificate chain TP-self-signed-********
    certificate self-signed 01
      3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 33303239 34303934 3438301E 170D3133 30343032 30353436
      31345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 30323934
      30393434 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100B9C3 F8E6BD43 3351D861 68398114 D31AACC1 CE16CDDA 7F0876BC 6E55EA3C
      5F258D90 20FC882D 42C90257 92DB9113 B461DD81 4080153F 6AE041AD E5BDDF7E
      7C21BD1B 35F05CCB F6D34A4D 6B04C309 F39D8426 865E2BFE 9E8051F2 6F411A49
      D71FBF0C 1AC85BEE 355563FB 2353D0C7 28D49071 840AF99B AF59D768 FCDCDF03
      94FF0203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
      551D2304 18301680 145ACD47 89D51095 70BE5400 595E826A 6A9E5E95 71301D06
      03551D0E 04160414 5ACD4789 D5109570 BE540059 5E826A6A 9E5E9571 300D0609
      2A864886 F70D0101 05050003 8181003B 1988FFCD 93112A99 707B7AD8 B56A08C0
      C274B974 B076AA19 BAFCC868 F118AE7D 4D8A55E2 42D8F9A9 9D617093 7EF6D459
      6BC0A990 BF5AF3E8 8E7F2787 41F4BFE2 65A1A3B0 D726033A 47A24D29 159ABF92
      16DBCF5C EC6602C2 E6137C0B C1FC7125 37E9CE49 82B45E18 FAB31A36 990BB3BC
      30D9EE8E 8B0A9F7C DC0B6C2B FA2740
                quit
    no ip source-route
    ip cef
    no ip bootp server
    ip name-server ********
    ip name-server ********
    no ipv6 cef
    parameter-map type protocol-info yahoo-servers
    server name scs.msg.yahoo.com
    server name scsa.msg.yahoo.com
    server name scsb.msg.yahoo.com
    server name scsc.msg.yahoo.com
    server name scsd.msg.yahoo.com
    server name cs16.msg.dcn.yahoo.com
    server name cs19.msg.dcn.yahoo.com
    server name cs42.msg.dcn.yahoo.com
    server name cs53.msg.dcn.yahoo.com
    server name cs54.msg.dcn.yahoo.com
    server name ads1.vip.scd.yahoo.com
    server name radio1.launch.vip.dal.yahoo.com
    server name in1.msg.vip.re2.yahoo.com
    server name data1.my.vip.sc5.yahoo.com
    server name address1.pim.vip.mud.yahoo.com
    server name edit.messenger.yahoo.com
    server name messenger.yahoo.com
    server name http.pager.yahoo.com
    server name privacy.yahoo.com
    server name csa.yahoo.com
    server name csb.yahoo.com
    server name csc.yahoo.com
    parameter-map type protocol-info msn-servers
    server name messenger.hotmail.com
    server name gateway.messenger.hotmail.com
    server name webmessenger.msn.com
    parameter-map type protocol-info aol-servers
    server name login.oscar.aol.com
    server name toc.oscar.aol.com
    server name oam-d09a.blue.aol.com
    multilink bundle-name authenticated
    license udi pid C3900-SPE100/K9 sn ********
    username admin privilege 15 secret 4 ********
    username guido privilege 15 secret 4 ********
    redundancy
    ip tcp synwait-time 10
    ip ssh time-out 60
    ip ssh authentication-retries 2
    class-map type inspect imap match-any ccp-app-imap
    match invalid-command
    class-map type inspect match-any ccp-cls-protocol-p2p
    match protocol edonkey signature
    match protocol gnutella signature
    match protocol kazaa2 signature
    match protocol fasttrack signature
    match protocol bittorrent signature
    class-map type inspect match-all sdm-nat-http-1
    match access-group 101
    match protocol http
    class-map type inspect match-all sdm-nat-user-protocol--1-2
    match access-group 102
    class-map type inspect match-all sdm-nat-user-protocol--1-1
    match access-group 101
    class-map type inspect smtp match-any ccp-app-smtp
    match data-length gt 5000000
    class-map type inspect match-any ccp-skinny-inspect
    match protocol skinny
    class-map type inspect match-any ccp-h323nxg-inspect
    match protocol h323-nxg
    class-map type inspect match-any ccp-cls-icmp-access
    match protocol icmp
    match protocol tcp
    match protocol udp
    class-map type inspect match-any ccp-cls-protocol-im
    match protocol ymsgr yahoo-servers
    match protocol msnmsgr msn-servers
    match protocol aol aol-servers
    class-map type inspect match-all ccp-protocol-pop3
    match protocol pop3
    class-map type inspect match-any ccp-h225ras-inspect
    match protocol h225ras
    class-map type inspect match-any ccp-h323annexe-inspect
    match protocol h323-annexe
    class-map type inspect match-any ccp-cls-insp-traffic
    match protocol pptp
    match protocol dns
    match protocol https
    match protocol icmp
    match protocol imap
    match protocol pop3
    match protocol tcp
    match protocol udp
    class-map type inspect pop3 match-any ccp-app-pop3
    match invalid-command
    class-map type inspect match-all SDM_GRE
    match access-group name SDM_GRE
    class-map type inspect match-any ccp-h323-inspect
    match protocol h323
    class-map type inspect match-all ccp-invalid-src
    match access-group 100
    class-map type inspect match-any ccp-sip-inspect
    match protocol sip
    class-map type inspect match-all ccp-protocol-imap
    match protocol imap
    class-map type inspect match-all sdm-nat-https-1
    match access-group 101
    match protocol https
    class-map type inspect match-all ccp-protocol-smtp
    match protocol smtp
    class-map type inspect match-all ccp-protocol-http
    match protocol http
    class-map type inspect match-any CCP_PPTP
    match class-map SDM_GRE
    class-map type inspect match-all ccp-insp-traffic
    match class-map ccp-cls-insp-traffic
    class-map type inspect match-all ccp-protocol-p2p
    match class-map ccp-cls-protocol-p2p
    class-map type inspect match-all ccp-protocol-im
    match class-map ccp-cls-protocol-im
    class-map type inspect match-all ccp-icmp-access
    match class-map ccp-cls-icmp-access
    policy-map type inspect pop3 ccp-action-pop3
    class type inspect pop3 ccp-app-pop3
      log
      reset
    policy-map type inspect smtp ccp-action-smtp
    class type inspect smtp ccp-app-smtp
      reset
    policy-map type inspect ccp-pol-outToIn
    class type inspect ccp-protocol-http
      inspect
    class type inspect CCP_PPTP
      pass
    class type inspect sdm-nat-http-1
      inspect
    class type inspect sdm-nat-https-1
      inspect
    class type inspect sdm-nat-user-protocol--1-1
      inspect
    class type inspect sdm-nat-user-protocol--1-2
      inspect
    class class-default
      drop log
    policy-map type inspect imap ccp-action-imap
    class type inspect imap ccp-app-imap
      log
      reset
    policy-map type inspect ccp-inspect
    class type inspect ccp-invalid-src
      drop log
    class type inspect ccp-protocol-http
      inspect
    class type inspect ccp-protocol-smtp
      inspect
      service-policy smtp ccp-action-smtp
    class type inspect ccp-protocol-imap
      inspect
      service-policy imap ccp-action-imap
    class type inspect ccp-protocol-pop3
      inspect
      service-policy pop3 ccp-action-pop3
    class type inspect ccp-protocol-p2p
      drop log
    class type inspect ccp-protocol-im
      drop log
    class type inspect ccp-insp-traffic
      inspect
    class type inspect ccp-sip-inspect
      inspect
    class type inspect ccp-h323-inspect
      inspect
    class type inspect ccp-h323annexe-inspect
      inspect
    class type inspect ccp-h225ras-inspect
      inspect
    class type inspect ccp-h323nxg-inspect
      inspect
    class type inspect ccp-skinny-inspect
      inspect
    class class-default
      drop
    policy-map type inspect ccp-permit
    class class-default
      pass
    policy-map type inspect ccp-permit-icmpreply
    class type inspect ccp-icmp-access
      inspect
    class class-default
      pass
    zone security in-zone
    zone security out-zone
    zone-pair security ccp-zp-self-out source self destination out-zone
    service-policy type inspect ccp-permit-icmpreply
    zone-pair security ccp-zp-in-out source in-zone destination out-zone
    service-policy type inspect ccp-inspect
    zone-pair security ccp-zp-out-self source out-zone destination self
    service-policy type inspect ccp-permit
    zone-pair security ccp-zp-out-zone-To-in-zone source out-zone destination in-zone
    service-policy type inspect ccp-pol-outToIn
    crypto isakmp policy 1
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp client configuration group jmgvpn
    key ****
    pool SDM_POOL_1
    include-local-lan
    max-users 10
    netmask 255.255.255.0
    crypto isakmp profile ciscocp-ike-profile-1
       match identity group jmgvpn
       client authentication list ciscocp_vpn_xauth_ml_1
       isakmp authorization list ciscocp_vpn_group_ml_1
       client configuration address respond
       virtual-template 1
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    mode tunnel
    crypto ipsec profile CiscoCP_Profile1
    set transform-set ESP-3DES-SHA
    set isakmp-profile ciscocp-ike-profile-1
    interface Null0
    no ip unreachables
    interface Embedded-Service-Engine0/0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    shutdown
    interface GigabitEthernet0/0
    description JMG$FW_INSIDE$
    ip address 10.0.14.*** 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly in
    zone-member security in-zone
    glbp 10 ip 10.0.14.***
    glbp 10 authentication text JMG
    glbp 10 forwarder preempt delay minimum 100
    duplex auto
    speed auto
    no mop enabled
    interface GigabitEthernet0/1
    description Cloud$ETH-LAN$$FW_INSIDE$
    ip address 10.3.15.*** 255.255.255.252
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    zone-member security in-zone
    duplex auto
    speed auto
    no mop enabled
    interface GigabitEthernet0/2
    description Internet (Only in use on R01)$FW_OUTSIDE$$ETH-WAN$
    ip address 46.144.***.*** 255.255.255.240
    no ip redirects
    no ip proxy-arp
    ip verify unicast reverse-path
    ip flow ingress
    ip flow egress
    ip nat outside
    ip virtual-reassembly in
    zone-member security out-zone
    duplex auto
    speed auto
    media-type rj45
    no mop enabled
    interface Virtual-Template1 type tunnel
    ip unnumbered GigabitEthernet0/0
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile CiscoCP_Profile1
    ip local pool SDM_POOL_1 192.168.1.1 192.168.1.10
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip nat inside source list 10 interface GigabitEthernet0/2 overload
    ip nat inside source list 11 interface GigabitEthernet0/2 overload
    ip nat inside source static tcp 10.0.14.*** 443 interface GigabitEthernet0/2 443
    ip nat inside source static tcp 10.0.14.*** 80 interface GigabitEthernet0/2 80
    ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/2 permanent
    ip route 10.0.0.0 255.0.0.0 GigabitEthernet0/1 permanent
    ip route 10.1.14.*** 255.255.255.0 10.0.14.*** permanent
    ip access-list extended SDM_GRE
    remark CCP_ACL Category=1
    permit gre any any
    logging trap debugging
    access-list 1 remark HTTP Access-class list
    access-list 1 remark CCP_ACL Category=1
    access-list 1 permit 10.3.15.24 0.0.0.3
    access-list 1 permit 10.0.14.0 0.0.0.255
    access-list 1 deny   any
    access-list 3 remark CCP_ACL Category=2
    access-list 3 permit 10.5.14.0 0.0.0.255
    access-list 3 permit 10.0.14.0 0.0.0.255
    access-list 5 remark CCP_ACL Category=2
    access-list 5 permit 10.0.14.0 0.0.0.255
    access-list 6 remark CCP_ACL Category=2
    access-list 6 permit 10.0.14.0 0.0.0.255
    access-list 7 remark CCP_ACL Category=2
    access-list 7 permit 10.0.14.0 0.0.0.255
    access-list 8 remark CCP_ACL Category=2
    access-list 8 permit 10.0.14.0 0.0.0.255
    access-list 9 remark CCP_ACL Category=2
    access-list 9 permit 10.0.14.0 0.0.0.255
    access-list 10 remark CCP_ACL Category=2
    access-list 10 permit 10.0.14.0 0.0.0.255
    access-list 11 remark CCP_ACL Category=2
    access-list 11 permit 10.0.14.0 0.0.0.255
    access-list 100 remark CCP_ACL Category=128
    access-list 100 permit ip host 255.255.255.255 any
    access-list 100 permit ip 127.0.0.0 0.255.255.255 any
    access-list 100 permit ip 192.168.253.0 0.0.0.255 any
    access-list 101 remark CCP_ACL Category=0
    access-list 101 permit ip any host 10.0.14.153
    access-list 102 remark CCP_ACL Category=0
    access-list 102 permit ip any host 10.0.14.173
    no cdp run
    control-plane
    banner login ^CCCPlease login. Or leave if you have no right to be here.^C
    line con 0
    login authentication local_authen
    transport output telnet
    line aux 0
    login authentication local_authen
    transport output telnet
    line 2
    no activation-character
    no exec
    transport preferred none
    transport input all
    transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
    stopbits 1
    line vty 0 4
    access-class 23 in
    authorization exec local_author
    login authentication local_authen
    transport input telnet ssh
    line vty 5 15
    access-class 23 in
    authorization exec local_author
    login authentication local_authen
    transport input telnet ssh
    scheduler allocate 20000 1000
    scheduler interval 500
    end

    Remove the ip nat outside command for a moment during a permitted downtime.
    I have a feeling you should do some NAT excemption for the VPN traffic (deny vpn traffic for nat policies).

  • Cannot connect to local network: accidental setup

    I just setup a home network, and I went in to give access to my tivo because I thought I needed to add it to the access control list of IP's. However, I never added my own local IP so now I cannot log into my own network because I'm not on the list. I have no idea how to reset my networking preferences back to default and set everything up from the beginning. Yes, I'm a douche. Any ideas?
    Dual g5 1.8   Mac OS X (10.4.6)  

    Couple of ideas -
    Reset to Factory default and set up from the beginning,
    or, if I understand correctly that you have a fixed IP address, you could change to Configure using DHCP, set the reservation, then go back to configure manually.

  • HT5569 Have just bought an i-Pad Wi-Fi Cellular and cannot connect to any network, any ideas ?

    Totally new and inexperienced to i-pads but have bought one as I need to travel but keep in touch with various things. Have put sim card in and it's asking me to activate i-Pad and offering networks or use mobile connection. As it's a cellular i-Pad I've tried mobile connection but nothing happens, what am I doing wrong ? There are no instructions in box to help.
    If anyone can help I would be grateful.
    Thanks in advance.
    Steve.................

    This is the iPod touch forum. I requested you most be moved to the iPad forum.

  • AirPort does not have an IP address and cannot connect to the Internet.

    Wi Fi problems
    I have recently changed from a old netgear router to using a vigor 120 modem with airport extreme
    Internet connection is established but my airport express reports "AirPort does not have an IP address and cannot connect to the Internet." although status is ON and the correct wifi address appears.
    My iPhone also identifies the correct network but cannot connect
    Any suggestions?

    I don't have any phones, so not aware of the options, but on a Mac to fix this problem it'd likely be...
    Instead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. Before I went through network diagnostics and all of that stuff in system preferences, and then I tried the "Join Other Network" method, and now it works like a dream.
    https://discussions.apple.com/message/17028445#17028445
    Or...
    Go to System Preferences
    Click Network
    Highlight AirPort and click Configure...
    Choose “By default, join: Preferred networks”
    Select your access point and Remove your access point with the minus button.
    Launch your keychain access in Utilities and delete your access point keychain entry.
    Reboot

  • Internet works, but I have an exclamation mark instead of AirPort connection and cannot connect to my WiFi.. PLEASE HELP!

    Internet works, but I have an exclamation mark instead of AirPort connection and cannot connect to my WiFi.. PLEASE HELP!

    When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
    Assuming that you've ruled out those possibilities, restart the computer and try again. If there's no change, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click  Applyand test.
    If there's still no connection, and if you have control of the router, compare its settings to Apple's recommendations. Some third-party routers may be incompatible in 802.11b/g/n radio mode. Try setting the mode to 802.11n only.

  • HT1386 I have the iPhone 5s and cannot connect to iTunes. It always says 'iPhone device has timed out' and never connects. How do i fix?

    I have the iPhone 5s and cannot connect to iTunes. It always says 'iPhone device timed out' and never connects. How do I fix it?

    Hi Kaitlynlh,
    Thanks for using Apple Support Communities.  If your device is timing out, I would try restarting the iPhone and attempting to connect again.  If the issue still persists, try resetting as well.  You can find instructions here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    - Ari

  • I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer.  Can I direct the iPad to the usb connected printer.  Both macbook and iPad confirm a wifi connection through the airport exp.

    I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer.  Can I direct the iPad/iphone to the usb connected printer.  Macbook iphone and iPad confirm a wifi connection through the airport express.

    You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
    PrintCentral for iPad on the iTunes App Store

  • Just installed IOS 8 to iphone 5 and cannot connect to WI FI. Sometimes connects and when I begin to use the phone ot drops out.

    Just installed IOS 8 to iphone 5 and cannot connect to WI FI. Sometimes connects and when I begin to use the phone ot drops out.
    I have attempted all the regular trouble shoots such as resets, complete restore and reinstallation of ios 8. no change.

    I don't have an answer for you but from my experience iOS WiFi syncing has always been a hit and miss affair (more miss than hit I'm afraid). I have gotten to the stage where I rarely use the WiFi sync. It is just quicker, easier and much less stressful to use the USB cable. I am having the same issues with all the iOS devices in our family which includes various models of iPhone, iPad and an iPod Touch and have been having them since WiFi syncing was introduced (in iOS5 ???). And then I have not even mentioned my favorite iTunes syncing messages: "Waiting for items to copy" and "Waiting for changes to be applied"!
    iTunes is always extremely quick and eager to pick up the devices but as soon as I click on sync it shows "Looking for iDevice" and then the device disappears. I have found that initiating the sync from the Settings app on the device prevents this issue.
    It does however seem as if it is worse with Windows 7. I did not have so many issues with my previous Windows Vista PC.
    Sorry I cannot be of any help.

  • How to use iMac w/Airport and DSL connection as a wireless router ???

    My iMac G5 (with Airport) is connected via Ethernet to a DSL modem.
    I want to connect my iBook G3 (non-Airport) wirelessly through the G5 to access the internet in a small home network, (without a standalone router).
    I have a USB adapter (ASUS wl-167G) and MAC OS drivers for the iBook. I seem to be getting a connection to the Airport card in the G5, but nothing to the modem with Safari or Firefox.
    I need some detailed instructions on setting up the iMac to access the DSL normally AND pass through a wireless connection for the iBook.
    Future plans are to buy an Airport Express for stereo and printer purposes.
    If using the Express will greatly simplify what I'm trying to do here, please advise so, (and how), and I'll get one now.
    Thanks
    Ken

    Thanks sig, but I am already set up that way. Also in sharing>internet>
    Airport options: channel-automatic, firewall-off, services-on (file sharing,Etc.)
    Network Status shows: Built -in -Ethernet, active and a IP address. Airport, sharing is on and using Airport and an ID #
    I also tried setting Airport to channel 11 (what the USB "Dongle" is connected to).
    Still no joy.
    I think I may need to manually configure both Airport TCP/IP in the iMac, and the USB Adapter in the iBook but I don't know what values to enter for IP Address, Subnet Mask, and Router.
    In way over my head, here. Any additional help is greatly appreciated.
    Ken
    20" iMac iSight G5,1.5 GHz Ram;   Mac OS X (10.4.4)   iBook 900 MHz G3 (OS X 10.3.9); iPod Photo 60Gb; LaCie 250 Gb FW HD

  • Trying to register iPhone 4. iTunes store says its busy and cannot connect, try again latter.

    Trying to register new iPhone 4 for the first time. iTunes store says its busy and cannot connect. I have tried many times over 2 days but no luck. What can I try.

    Hello,
    Almost a year later and I'm experiencing this exactly situation now.
    I was in the middle of the process of data migration from iPhone 4 to 4S and due to really slow download speed restoring iCloud backup, I interrupted the process and started a new full restore process through USB and iTunes (reset all setting and configurations on the 4S and did a local machine backup of the old 4 and asked to restore from that).
    After a full successful restore process, I'm trying to delete the old iPhone 4 2GB backup in iCloud and the error message saying that "this backup cannot be deleted because its being used to restore another device, or backup is currently in progress".
    Of course I ran out of spece (iPad, old iPhone 4 and new iPhone 4S backups) and I tried everything, disabling iCloud, deleting from my MBP, from iPad, and no success.
    I cannot restore the old 4 and deactivate iCloud backup because I don't have this phone anymore, probably it's already in use by another person.
    PS: iOS6, Mountaing Lion
    Any ideas?
    Thanks

Maybe you are looking for