New 11g Clusterware install encounters parkwebwin-v02.prod.mesa1.secureserv
Performing a new fresh install of Oracle 11g Clusterware and I continue to get the following error during the install:
ipAddress = 68.178.232.99
INFO: Query Returned: parkwebwin-v02.prod.mesa1.secureserver.net
INFO: Calling Query netQueries10.2.0.2.0 getMachineName
hostName = parkwebwin-v02.prod.mesa1.secureserver.net
INFO: Query Returned: parkwebwin-v02
INFO: Calling Query netQueries10.2.0.2.0 getMachineName
somehow these are show-stoppers for a fresh install of CRS on Red Hat Linux EL5.3 64bit.
Any Ideas on how to stop my linux server from seeing "parkwebwin-v02.prod.mesa1.secureserver.net ?
and IP: 68.178.232.99
Thanks
68.178.232.99 is not in either of my RAC nodes /etc/hosts files
During the Clusterware install the "Product-Specific Prerequisite Checks" are successful
At the "Specify Cluster Configuration" I have
rac1.domain.com rac1-priv.domain.com rac1-vip.domain.com and I add the following:
rac2.domain.com rac2-priv.domain.com rac2-vip.domain.com
THanks
Similar Messages
-
New 11g RAC Install (Linux-64)
I would like to get some advice.
I keep getting conflicting arguments - however my plans are to
first install Clusterware, next install ASM and then finally the database in an 8 node cluster.
Is this the best sequence ?
On another topic. An associate suggested we use ASM for voting disks and I thought that was
not recommended. Any thoughts ?
Thanks in advance for your kind indugence with me.
Brianhttp://download.oracle.com/docs/cd/B28359_01/install.111/b32285/toc.htm
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnLinuxUsingNFS.php
Is this the best sequence ? - Setup Disk share Storage for OCR(280M), VOTE(280), SPFILE+ASM (50M), ASM(diskgroups)
- Make Pass Phrase and make node01 can connect all nodes(no ark password)
- install Oracle Clusterware
- Install Oracle Database at ASM_HOME (for asm)
(may Create ASM DISK groups)
- Install Oracle Database at Oracle database Home (for rdbms)
- if not create ASM Disk Groups, create them from use ORACLE_HOME=ASM HOME
- Create database (ORACLE_HOME= Oracle database Home)
- Create Database Service
By the way, read oracle document, that can help
Good Luck -
Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
If possible, Kindly provide me the website link.Pl do not post duplicates
Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
Continue the discussions in your original threads -
Oracle 11g clusterware VIP failover failed
I installed Oracle 11g Clusterware succesfully, without any errors as per link:
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnRHEL5UsingVMwareESXAndNFS.php
After that,I did vip failover test
I rebooted the node-2
Before reboot,
[root@advansrac1 bin]# ./crs_stat -t
Name Type Target State Host
ora....ac1.gsd application ONLINE ONLINE rac1
ora....ac1.ons application ONLINE ONLINE rac1
ora....ac1.vip application ONLINE ONLINE rac1
ora....ac2.gsd application ONLINE ONLINE rac2
ora....ac2.ons application ONLINE ONLINE rac2
ora....ac2.vip application ONLINE ONLINE rac2
After reboot,
Name Type Target State Host
ora....ac1.gsd application ONLINE ONLINE rac1
ora....ac1.ons application ONLINE ONLINE rac1
ora....ac1.vip application ONLINE ONLINE rac1
ora....ac2.gsd application ONLINE ONLINE rac2
ora....ac2.ons application ONLINE ONLINE rac2
ora....ac2.vip application ONLINE UNKNOWN rac1
[root@rac1 bin]# ./crs_stop ora.rac2.vip
Attempting to stop `ora.rac2.vip` on member `advansrac1`
Stop of `ora.rac2.vip` on member `advansrac1` succeeded.
[root@rac1 bin]# ./crs_stat -t
Name Type Target State Host
ora....ac1.gsd application ONLINE ONLINE rac1
ora....ac1.ons application ONLINE ONLINE rac1
ora....ac1.vip application ONLINE ONLINE rac1
ora....ac2.gsd application ONLINE ONLINE rac2
ora....ac2.ons application ONLINE ONLINE rac2
ora....ac2.vip application OFFLINE OFFLINE
[root@rac1 bin]# ./crs_start ora.rac2.vip
Attempting to start `ora.rac2.vip` on member `rac2`
Start of `ora.rac2.vip` on member `rac2` succeeded.
[root@rac1 bin]# ./crs_stat -t
Name Type Target State Host
ora....ac1.gsd application ONLINE ONLINE rac1
ora....ac1.ons application ONLINE ONLINE rac1
ora....ac1.vip application ONLINE ONLINE rac1
ora....ac2.gsd application ONLINE ONLINE rac2
ora....ac2.ons application ONLINE ONLINE rac2
ora....ac2.vip application ONLINE ONLINE rac2
I have only 1.5G on each node
Here the issue is,
1. Actual Result: # During failover why it is showing UNKNOWN state for ora.rac2.vip on member rac1
Expected Result: # During failover,it have to be ONLINE state for ora.rac2.vip on member rac1
2. I have to start ora.rac2.vip manually, when node-2 is up.I want VIP fail over have to happen automatically when node-2 is up to normal online state.
Help me out from this issueVMware is unsupported but that is likely not your issue.
1. Run cluster verify and report the results
2. Did you create a failover service? How?
3. Post your TNSNAMES.ORA -
11g Clusterware installation VIPCA Exception error on linux
Hi,
I'm trying to build a 11g RAC on OEL5.1 with vmware for education purposes.
Software used:
- Oracle Enterprise Linux 5.1
- 11g clusterware for linux
- 11g Enterprise Edition database software for linux
- VMware 1.0.8 for linux
Hardware:
- Intel 2.3GHz quadcore with 4GB RAM and 250GB harddisk
I have successfully setup:
- host machine using OEL5.1 and installed VMware 1.0.8
- 2 nodes with guest OS using OEL5.1
When installing 11g clusterware, at the last part when we need to run orainst.sh and root.sh as root user on both nodes, I am able to run orainst.sh successfully on both nodes.
However, root.sh is only able to run successfully on node 1 but had VIPCA error on node 2.
Excerpt of the root.sh error message on node 2:
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
rac1
rac2
Cluster Synchronization Services is active on all the nodes.
Waiting for the Oracle CRSD and EVMD to start
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps+
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ewt/wizard/WizardFrame+
Executing crs_stat -t as root user on both nodes only show 2 crs processes (CRSD and EVMD).
I did try invoking vipca manually as root user, but keep getting the same Exception error:
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ewt/wizard/WizardFrame+
I have tried installing clusterware more than 3 times and keep getting the same errors.
Has anyone experienced this vipca error before?
Regards
Jim
Edited by: user6442011 on Jul 7, 2009 11:39 PMCheck vipca.jar file at $ORA_CRS_HOME/srvm/jlib/vipca.jar
$ORA_CRS_HOME/jdk/bin/jar -tvf $ORA_CRS_HOME/srvm/jlib/vipca.jar
Or
find $ORA_CRS_HOME -name vipca.jar -type f
Example: test...
# mv $ORA_CRS_HOME/srvm/jlib/vipca.jar $ORA_CRS_HOME/srvm/jlib/vipca.jar-bak
# $ORA_CRS_HOME/bin/vipca
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ops/vipca/VipCAStep:
- find vipca.jar
# find $ORA_CRS_HOME -name vipca.jar -type f
it should be at $ORA_CRS_HOME/srvm/jlib PATH
if not find... you can copy from other patch or ... (Or check why don'tfind ... it can happen if we patch, so find from old version )
If find ..
Check
$ORA_CRS_HOME/jdk/bin/jar -tvf $ORA_CRS_HOME/srvm/jlib/vipca.jar | grep Wizard
;) check you can read it (vipca.jar)
Or ... Example
# type vipca
/u01/oracle/crs/bin/vipca
# ls /u01/oracle/crs/srvm/jlib/vipca.jar
# /u01/oracle/crs/jdk/bin/jar -tvf /u01/oracle/crs/srvm/jlib/vipca.jarEdited by: Surachart Opun (HunterX) on Jul 8, 2009 5:22 PM
Edited by: Surachart Opun (HunterX) on Jul 8, 2009 5:36 PM -
Seeking confirmation - SQL Dev now in 11g RDBMS install
Hi gang
Can somebody confirm the following for me please? I'd confirm this for myself but it requires me to download the 11g RDBMS tarball for Linux -- which could take me weeks on my current internet connection.
Is it correct that SQL Developer is now included in the 11g RDBMS install?
Is it the intention SQL Developer will be included in every edition of the RDBMS (eg. Standard, Enterprise and XE etc)?
Will SQL Developer be included for every RDBMS platform (eg. Linux, Windows etc)?
...and am I correct in saying that SQL Developer was not included in any earlier RDBMS release (eg. 10g)?
Thanks for your help.
Regards,
CM.That's great, except you say that 1.2 is included by default. It's 1.1.3 that's included. (i.e. just a release earlier.
Yes, the SQL Developer team will be at OOW in San Francisco. We have 2 papers and a hands-on session. I'm really pleased about the hands-on session. Even though it's only an hour long, we are offering users a choice or tasks to work on, so hoping to give everyone an chance to get their hands onto the product, from beginners doing an overview to those wanting to get into more on the PL/SQL debugging to those wanting build XML extensions.
We'll also have a demo stand where we're planning to show off some new stuff and of course meet all the forum readers and contributors.
See you there.
Sue -
itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adamitunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam -
How to restore music on computer after new hard drive installed?
had new hard drive installed and am not able to retrieve/find music that was backed up on my computer before new hard drive was installed. Only music that was in the "cloud" was able to be retrieved. Any idea where it could be?
Thanks!Did you reinstalled iTunes ? It looks like you had a newer version of iTunes with the corresponding database, and now your iTunes seem to be an older version. If you are a little patient, you might easily fix this with iTunes 10.5 which should come out very very soon since iOS 5 has been annonced for tomorrow.
-
I had a new hard drive installed on my IMac. Now I am trying to reload everything back on. I do have time machine. How do I find all my pictures on TIme Machine to load back on IPhoto. I hope I haven't lost all my family photos. Help! Thanks a bunch!
Hi, I never use TM, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
On my old iTunes sofwear iTune store would not open. I uninstalled iTunes and downloaded the new updates and installed it. Now I get a message that said " The file iTunes Libary.itl" cannot be read becouse it was created by a newer version of iTunes.I did everything it said to do inarticle HT1923 Removing and reinstalling iTunes, Quick Time, and other sofware components for Windows Vista or Windows 7. Now what?
Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2 -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
New Mac, fresh install of Mountain Lion
When I click to open a .Pdf from a web page,while in Safar, I get a black window
Nothing opens in Preview or in Acrobat
No option to downloadOpen the Finder. From the Finder menu bar click Go > Go to Folder
Type of copy paste the following:
/Library/Internet Plug-Ins
Click Go. If you see this file: AdobePDFViewer.plugin
Drag it to the Trash, empty the Trash.
Quit and relaunch Safari. -
Is it possible to have 64-bit 11g Full Install and 32-Client on 1 computer?
Here's why I ask:
I have installed a full 64-bit 11g R2 install on my Windows 7 D: drive, installed two DB's, worked great. Then I realized application I need to support (Cognos 10.1) requires 32-bit client (for drivers) so I installed the 11g client also on D: drive as well (for space reasons).
My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client.
My sqlplus in the 64-bit OH worked fine (D:\oracle\app\dock\product\11.2.0\dbhome_1\BIN\sqlplus.exe) whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) did not work. The error was:
SQL*Plus: Release 11.2.0.1.0 Production on Mon Sep 26 18:02:30 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: cognos
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
Any login id (sys, system, etc) gave same error. 64-bit sql-plus worked fine. If I opened a cmd prompt and navigated to the 32-bit sqlplus under the client this WOULD work to login (but then I noticed it was using the 64-bit ORACLE_HOME and PATH settings if I typed set). In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 to
ORACLE_HOME = D:\oracle\client\app\dock\product\11.2.0\client_1
PATH = D:\oracle\client\app\dock\product\11.2.0\client_1\bin;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\
Guess what? This stopped both the 64-bit and 32-bit sqlplus from working, even after bouncing the computer. Now the listener (64-bit) OracleOraDb11g_home1TNSListener will also not start either.
Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!? The Cognos application appears to use the default server settings (most likely from ORACLE_HOME and Path) and in it I just type the name of the database and connection string, there's no real way to point it anywhere to differentiate. If it doesn't find 32-bit drivers it throws an error hence the reason I need the client sqlplus, etc to work.
Thanks in advance for any help!
Dave
Edited by: lo**** on Sep 26, 2011 4:20 PMDuplicate post.
{thread:id=2290122} -
my pc crashed...and i purchased a new one and installed itunes...how can i sync my ipod touch 2 my pc? when i connect it 2 itunes on my new pc..by defualt it will rerase everthing on my ipod
The other responder gave you a program that will transfer stuff from your iPod to your new computer. You can transfer iTunes purchaces to your new computer by:
http://support.apple.com/kb/HT1848
After you move your stuff to your new computer you will have to let iTunes erase your iPod and then sync with the stuff that is now in your iTunes library. You will loose app data though. -
My old iMac broke so i got a new hard drive installed. How can i retrieve my old purchased items?
hiya
got a new hard drive installed and couldn't retreive anything off my old hard drive
can i get my old purchased items from itunes
thanksHi hopscotch,
Log into the iTunes store and do a search to find your previously purchased items. Click the "Buy" button, and put in the same iTunes id and password that you originally used to purchase. A dialogue box will come up indicating that you have already purchased this item and do you want to download it again for free....
Say yes, and it will be re-downloaded to your Mac.
Hope this helps!
Cheers,
GB
Maybe you are looking for
-
PS gallery linked to Dreamweaver does not show up once on pub. server
i created a photoshop gallery and linked it to my website (Dreamweaver) under construction (as im learning); it shows up fine when i preview it on browser from my computer location, however, it does not show up once on the public server. any help as
-
"Sent Messages" folder not receiving new sent mails after a server change
My provider just moved my account to another server. The IMAP accounts needed to be re-established on my wife's PC in her program. So we know the files are all there on the new server. Funny thing is that it's not working on Mail on my iBook. And whe
-
How we will pull the data from Sap-Bi to sap-Bpc
Dear Experts, Thanks for watching this thread.The whole data is available in SAP-BI. My system environment is SAP-BPC MS7.5. Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces. How we will pull the data from SAP-BI
-
What is the best way to port complete applications from DEV - Test - PROD
Hi, One of my customers recently asked me, Supposing I do the complete integrations and modelling in SOA Suite on the DEV Environment. Then, What is the best way to port complete applications from DEV -> Test -> PROD ?? Also, since the URLs in use in
-
How to call constructor in MXML?
Hi If I have created a custom component in ActionScript that has non-empty constructor, how do I create this component in MXML?