New 2011 MB Air 4,2 - Spurious trackpad clicks (many)

Hi, I just upgraded from my old Macbook Air 2,1 (late 2008) to a new 2011 Macbook Air 4,2 (13").
This new unit has the glass trackpad which acts as a button when you press it.
I have been getting a great many spurious mouse clicks while swiping over the pad, that cause me to inappropriately select files and buttons, accidentally pick up files and folders and drop them into the folder next to them, yadda yadda.
I tried the obvious thing, which is to go to "Trackpad" in System Preferences, and to uncheck "Tap to click."  All the current system updates as of today are indtalled.  I am still getting spurious mouse clicks when I have fingers on the trackpad, even though the underlying button is never depressed and hence there has been no "clicking" sound.  This occurs with even light touch, and is totally unpredictable.  It happens about once or twice per minute.  It's a royal pain.  Is this a known issue?  Or do I need to bring my mac to a store to have it checked out?
Thanks,
K

Just FYI, I was able to resolve this issue.  I took the Air into the Apple store a couple times, but we weren't able to figure out what was wrong.
Then, while at home, I tried fiddling with the trackpad for the umpteent time (I had tried this before but had not had any luck reproducing the issue).  This time however, I notived that if I pressed down vry carefully with increasing pressure, slowly on the lower edge of the trackpad, I could get the mouseclick to register without actually mechanically "clicking" the trackpad.  E.g. the switch could be activated without the mechanism mechanically registering a click.  I did not notice this was possible the first many times I checked it, because it is actually very hard to do intentionally and requires a *very* steady hand applying gradual increasing pressure.
Apparently, as one is swiping, moving the pointer, and doing various other maneuvers on the trackpad, in this situation, the trackpad registers spurious clicks. If the normal pressure on the pad varies a lot during daily use, you will occasionally get spurious clicks when just the right pressure is there on the pad transiently.
I went into the Apple Store to try this out on the floor models, and found that this was not possible on any of the floor models.  Once I showed this to the Genius representative, he agreed that there must be something wrong with the trackpad.  He said that in addition, there are some screws on the trackpad that can be used to adjust the "spring" or amount of pressure to apply to the pad before it depresses, which he could try to see if it helps, but he felt it was better in this circumstance to just switch out the trackpad, which he did.
Since switching out the trackpad, I have not had a single spurious mouse click so I am very happy with the change.

Similar Messages

  • Endless Boot loop on the new 2011 MacBook Air

    Has anyone experienced the Endless Boot loop syndrome on the new 2011 MacBook Air?
    Mine is the 13" 4/128 model.
    Tried the SMC reset but to no avail!
    Am I the first one on earth?
    Please help, Apple world!

    It's not a hard core gaming rig, but it plays all the FPS games I like, quite well. It handles hi-def video, just fine. I use it for Photoshop, and it is quite fast. For web browsing, it has no equal. The 2010 maxed out 11" would do it all, except for some hi-def video (1080P), which it would stutter. But my new 2011 maxed 13", is perfect for video (1080P=no problem).
    I really don't think a MBP will give you as much, on a daily basis. It (the MBP) has only a few advantages, and except for the built in optical drive (which you can still go external, if need be), none of the advantages you will miss even slightly.
    I think the MBP would only serve me, if it spent most of the time deskbound, but I would still need an SSD. Once you have had an SSD, you can't go back. Then, you would have a really pricey MBP.

  • Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

    I have a Mid 2011 Macbook Air.
    Upgraded to Yosemite last week.
    Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
    I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
    After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
    If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
    I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
    I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
    I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
    I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
    I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
    Thanks,
    John

    Hi!
    I have exactly the same problem, and I can't find any solution.
    I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
    I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
    Any suggestion is greatly appreciated!

  • Is the new (2011) macbook air better than the mac book pro?

    Hi,
    I am a university student and Im thinking of going from my macbook pro 13" (2008) to the new macbook air i7 notebook but i'm not sure if I should get the new air, it appeals to me alot because of the fact that its so light and portable but im not sure if it will be enough for the programs I may run on it as I am a multimedia computing student I will be running software such as Photoshop, After Effects, Premier pro as well as flash and I dont know if the air will be as good as my pro has been.
    Before I take the leap I wanted to know if it was really worth me getting the new air, I love it because its portable, when i take my pro to uni it weighs a ton and the fact that the air is so light makes me want to get it, but if it wont be able to handle the work I need to do on it theres no point in me getting the air .
    I was thinking of getting the top of the range air:
    1.8GHz Dual-Core Intel Core i7
    4GB 1333MHz DDR3 SDRAM
    256GB flash storage
    the spec for my current pro is:
      2 GHz Intel Core 2 Duo
      4 GB 1067 MHz DDR3
    Is it really worth getting the air or would i be better off getting the new pros? Would really appreciate some advice.
    Thanks

    It's not a hard core gaming rig, but it plays all the FPS games I like, quite well. It handles hi-def video, just fine. I use it for Photoshop, and it is quite fast. For web browsing, it has no equal. The 2010 maxed out 11" would do it all, except for some hi-def video (1080P), which it would stutter. But my new 2011 maxed 13", is perfect for video (1080P=no problem).
    I really don't think a MBP will give you as much, on a daily basis. It (the MBP) has only a few advantages, and except for the built in optical drive (which you can still go external, if need be), none of the advantages you will miss even slightly.
    I think the MBP would only serve me, if it spent most of the time deskbound, but I would still need an SSD. Once you have had an SSD, you can't go back. Then, you would have a really pricey MBP.

  • Any screen problems or kernel panics on the new 2011 mac air? Help!

    I want to buy a macbook air but i now that the old one (2010 late) has some problems - screen flickering, kernel panics and eventually death. I want the new ait but also i want a computer to work fine, not with problems. Thanks guys.

    reinstalled the OS from the original CD with the wireless USB adapter attached and got a kernel panic, while booted from the original Mac install CD...
    Apple states that no external devices are can be attached to the Macbook when doing an install. I suggest an SMC reset and then reinstall your system exactly according to Apple guidelines. When you get to the point of wanting to attach your wireless USB device - don't. It's entirely possible there are issues with the system and this USB product that have not been documented.

  • New (2011) 13" Air in for repairs for 2 weeks - "on hold, part on order"

    Not sure if anyone can offer advice, but my typical fanboy attitude toward Apple is losing some of its enthusiasm.
    I got one of the just released 13" MacBook Airs which I was loving until it started developing problems with the keyboard  (either bluetooth or the built-in one) becoming randomly unresponsive, necessitating a reboot.  As the problem persisted I took it in to an Apple store where they determined it probably needed a new logic board.  It was sent to their repair facility.
    Two weeks later, the status of my repair remains "on hold -- part on order."  I've contacted Apple Care a couple of times and after checking with the "repair dispatcher" for additional details, I'm told the part's on order and should be in any day now...for two weeks.
    How can a part, for a new computer that's in full production be so difficult to get?
    At what point should I start demanding a new computer? 

    Not a defective Air..well defective in that it had the sound fluctuation and the photoshop brush problem. Then I got a 2nd Air and same thing. The retina does certain things like opening folders, especially shared ones on a network faster than the Haswell Airs. I've had two of the Air's now and it was the same behavior. I've also now had the 13" rMBP and a 15" rMBP (which I'm typing on now). Do you have any sources showing the Air to be faster than the rMBP? A quick search shows this -
    http://www.primatelabs.com/blog/2012/10/13-inch-retina-macbook-pro-benchmarks/
    showing the Air's slower than the retinas.
    We are not talking about a huge difference in any case but it's noticeable. I still have a cpl of days on the 2nd Air to return it. BTW, the update from Apple this week fixed the Photoshop and Sound fluctuation problems that many of the Air's have.

  • Macbook Air 2011, trackpad clicks but pointer doesn't move.

    Hi, I have got a mid 2011 Macbook Air.  It's trackpad is not responding, besides clicking any object on the screen it doesn't do anything else.
    The trackpad can't move at all for some reason. And I know for a fact that it's not the trackpad itself as I had it replaced, and it does the same with the new one.
    Upon opening the macbook air up, i noticed there was a little corrosion build up on the trackpad ribbon slot on the logic board. Now, the computer still works fine (i'm typing this on it). I have hooked up an external mouse and that works. And so does every single other thing, except the trackpad touch...
    Is my logicboard done? or could it be that the ribbon has gone bad due to corrosion?
    Thanks

    ALSO, I just checked and my right speaker doesn't work either. Its around the same spot where the ribbon connects to the logic board and it also had some corrosion on it. I have cleaned it all with 99% isopropyl alcohol but no avail.

  • Which Microphone for New Mid 2011 Macbook Air 13"

    Please recommend a few USB condensor microphones for voice/vocal recordings that is sure to work with the New Mid 2011 Macbook Air.
    My 3.5mm to USB adapters that work on my 2009 Macbook Pro with Leopard OS, no longer works with Lion OS
    Ill be using this with GarageBand, iMovie & Audacity. Previously I'd use my Azden SMX-10 with the adapter. (the Azden is also used with my Canon DSLR).
    Thanks in advance.

    It is entirely possible, as many have known from day one (as ifixit's first teardown revealed). Unlike the unupgradeable memory, the SSD is a discrete expansion card that is removeable with just one screw, after removing the case cover. It is however debateable as to whether such an expansion is worth the possible risk of making demonstrable changes to the MBA whilst still under warranty. So you may want to stave off consideration for a while.
    I made the upgrade recently on my older 2010 MBA, and it was easier than upgrading the HDD on my old MacBook Pro.
    Here OWC/Mac Sales has kits and instruction videos.

  • No AirPlay icon on mid 2011 macbook air with a new Apple TV

    Hi. I just bought a brand new Apple TV. I own a mid 2011 macbook air on which I've installed mountain lion OS X. both the apple TV and my macbook air are connected to the same wireless network, yet i dont have the AirPlay icon on my macbook. I'm able to play music from my mac's iTunes library, and even tough the homesharing on iTunes is on, I dont have the airplay icon so I can't stream movies\videos\pictures which are not in my iTunes library.

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • Magic Trackpad won't work with Magic Mouse on brand new 2011 27" i5 iMac

    I have a brand new 2011 27" i5 iMac which I bought with Snow Leopard pre-loaded. Naturally, I included the new Magic Trackpad in my purchase, and though there were some problems with the device in SL - such as it going haywire without explanation - it generally worked, although battery levels were erratic (one day 80%, then an hour later 42%, then 80% again).
    When I installed Lion I did a clean install after backing up to Time Machine - and a Super Dupered external drive. I had some difficulties trying to install Lion from an external flash drive so I deleted again and reinstalled SL, then reinstalled over the SL install I did (with no other software except Mac OS X 10.6.8 and other system updates to facilitate install). Rather than copying apps from my old SL drive, I downloaded fresh copies and reinstalled one by one. I don't use a lot of apps apart from Microsoft Office, browsers and iLife and have not installed any additional scripts, extensions or add-ons (like USB Overdrive). It's a pretty clean install.
    Since then, although I'm generally happy with Lion, the Magic Trackpad won't work! It does work for a little while with basic gestures - mainly moving the cursor and scrolling - then it gives up the ghost and loses connectivity. I have done the following:
    Disconnected and reconnected the MTP after turning it on and off. MTP works for about two minutes, goes crazy then no response.
    Shut the computer down, pulled out the plug, waited two minutes, then started up again. MTP works for about two minutes, goes crazy then no response.
    Run Onyx, shut down computer, then pulled out plug (see above).
    Checked options in Universal Access, shut off "Ignore other devices when trackpad in use" (or whatever the option is). MTP works for about two minutes, goes crazy then no response.
    Turned off the Magic Mouse. MTP works for about two minutes, goes crazy then no response.
    But none of this seems to work! I know the MTP is connected because I can see it in the BT menu in the menu bar and also in System Preferences. I have noticed since upgrading that my permissions - which when I bought the computer were totally clean - now run lines and lines about "Library/Core Services" so I am unsure whether this is related. I also notice a lot of people are in the same boat as me, which makes me wonder if it's either a hardware issue or a release issue - after a week or so of totally silent running, my 2TB Hitachi HDD started up with the grumbly tum. I'd really appreciate any tips from anyone out there!

    Hi, marksaner
    You could try installing the latest version of the Synaptics driver. Synaptics is the company that makes the UltraNav driver and drivers for many other computer brands. This driver should have the same functionality as the UltraNav driver, so there's no worry there. You can find the driver here. 
    Hope it helps,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed.  Is there an adapter available so that I can use it?

    I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed.  Is there an adapter available so that I can use it?

    Welcome to the Apple Support Communities
    Use the MagSafe to MagSafe 2 Converter > http://store.apple.com/us/product/MD504ZM/A/magsafe-to-magsafe-2-converter?fnode =51 However, note that the MacBook Air doesn't provide enough energy to charge the MacBook Pro with Retina display, so it could not work

  • How to install windows 7 on 2011 macbook air?

    I'm planing to buy a mid 2011 macbook air. I want to install windows 7 using boot camp on it. can i install windows 7 without any external cd/dvd drive??

    If I want to remove mac os and keep only windows 7 which I did on new macbook air (2011) I run in to couple of issue
    First of all after install driver unable to login as CTRL+ALT+DEL don't work to let to get login screen, but after installing IntelHDGraphicsSetup64.exe from bootcamp driver CD it work some time not always.
    Secondly how to instal bootcamp so that I can enable rightclick on trackpad under windows 7 Ent 64 bit  from bootcamp control screen. and if don't install bootcamp how to enable right click on the trackpad?
    Can I get some help if I am doing some thing wrong? Thanks

  • Mid 2011 Macbook Air Painfully slow.

    Mid 2011 Macbook Air Painfully slow.
    Hey everyone.  I am writing about my 13 inch Mid 2011 Macbook Air. 
    Recently it has been extremely slow and on occasion has not started up.
    I have reset the PRAM and SMC already, yet it is still very slow.  I have a couple theories about what might have caused it, are they plausible?
    Theory 1:  It’s a software problem. I tried to upgrade to 10.8.2 but halfway through the upgrade the computer restarted and somehow I was still on 10.8.1.  For fear of a big issue happening I didn’t try to upgrade again. Perhaps it is a flaw in Apple’s software update? 
    The important thing to note about this update is that I tried to install 10.8.2 around a month or two weeks BEFORE I started having problems.  So if these issues were due to 10.8.2’s failed update then it certainly was a delayed reaction. 
    I would of course like to update to 10.8.2 BUT as my computer is acting EXTREMELY slow and having trouble turning on occasionally I am worried the software update will completely brick the machine.  Is that possible?  Should I actually finish through with the software update?
    Theory 2:  It was an electricity problem. 
    The computer died when I was sitting at a café plugged into their wall sockets.  A few days later when I came back to the same spot with my old macbook which is now being used in lieu of the Air it suddenly turned black for a little while. Sensing it might be an electricity surge or something with their system I unplugged the cable.  I am not sure if that was paranoia though. 
    Can an electricity surge or a bad outlet fry a computer?  Can it fry the ram so the computer is extremely slow? Does that theory hold any water? 
    Thanks for your help diagnosing this problem.
    All the best. 

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' 
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”. 
    Step 2 
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}' 
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}' 
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null 
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • My mid-2011 MacBook Air bricks itself after 10.7.2 update

    I have a new MacBook Air (11") that was working just great, until today.  Today, I used Software Update to install the updates, which included 10.7.2 as well as the recue partition update.
    I did everything you're supposed to do, and when it rebooted, the gray screen comes up, and it shows the spinny doohickey on the bottom showing that it's working.  Then, suddenly, up pops a big "no" icon (the circle with the slash through it) after about 60 seconds.
    It simply doesn't do anything after that.
    Hard-power-off, wait, power-on, repeat, same thing.
    So I reboot with cmd-R to get the rescue partition. It works fine; I ask it to re-install Mac OS X, which then takes about 45 minutes (argh).  Finally, Mac OS X is back, the machine is nicely booted up, all my files are there, everything is good.. But of course, the reinstall took me back to 10.7.1.
    All I want to do is upgrade my fricking iPhone to IOS 5.0, but I can't do that without knowing I can sync which requires iCloud which of course requires 10.7.2.  So I *have* to re-do the upgrade.
    Back to Software Update, back to installing 10.7.2. And .. 20 minutes later .. back to bricked MacBook Air.
    What a waste of my time. What a failure, Apple. I'm very very very very very unhappy that I've wasted so much time just to update my damned iPhone to IOS 5. I'm still without an update. Now I'm trying to figure out how to move my iTunes to another machine -- not nearly as obvious as it should be.  ARGH. I'm going to throw this MacBook Air off the balcony in about 10 minutes. :-(
    Thanks for listening.
      Steve

    Wow, you're right -- I can't believe it. I just really can't believe they would screw up so badly, yet when I search for "10.7.2 filevault" I don't find more than a couple of articles about it on the web (including this thread). Why on earth wouldn't Apple have put up some kind of warning about this? I can't believe it, really. It's insane.
    On my newly-functional 10.7.2 MBA, I wanted to test your theory and so I turned on filevault 2 and encrypted the main disk again.  It of course wanted me to reboot. So I rebooted. And *blammy* -- same error / boot failure.  Wow.  Also, interestingly, even on a working 10.7.2 system, you can't mount a USB drive that was encrypted using Filevault 2 encryption (in Disk Utility, e.g., as a "Mac OS X, journalled, encrypted" volume that was encrypted with DiskUtility on Lion 10.7.1).  I still have a 10.7.1 machine that I will not upgrade until I can at least decrypt the disk -- but right now, Disk Utility tells me it fails decrypting the external USB disk so I'm hosed!!! ARGH.
    Now, going back to the booting problem after upgrade -- for anyone's reference who's still keeping score -- you can easily recover from the booting problem with upgrading a Filevault 2 root drive: Power-cycle the machine and then hold down cmd-r to bring up the Lion Recovery application.  Within Lion Recovery, choose "Disk Utility", and then click on the (as yet unmounted, still encrypted) root hard drive to select it. Then go to the File menu, and choose "Turn off encryption" for this disk.  It then prompts you for the password, and if you enter it, *blammy* you're back up and running again.
    In my case, the disk had only just begun encrypting so the action was instant, and then once it confirmed the disk was now decrypted, I simply chose "Restart" from the Apple menu, and I was back in business (no hairy re-installs to deal with).  If this is an already-encrypted volume, presumably it'll take you a bit longer (the normal 45-minutes to 2 hours) to decrypt it.  But at least no more installing software -- it'll "just work".
    Maybe I'll go post a simpler version of these instructinos on the other threads, but this is the simplest fix -- just turn off filevault 2 from within Lion Recovery, basically, and that fixes the boot problems.
    Apple, if you're listening, you really really really need to say something to your users so they know. Many many many MBA users are likely to have still not upgraded. You can prevent them from hating you and your products by making sure they don't screw the pooch here.  Short version: Mid-2011 MacBook Airs running Filevault 2 WILL NOT BOOT after 10.7.2 update; so users should turn off Filevault2 before upgrading.
      Steve

  • My Mid-2011 Macbook Air becomes extremely hot when installing apps from the Mac App Store and when deleting apps

    My Mid-2011 Macbook Air 13-inch (OSX 10.8.1 Mountain Lion) becomes hot to the touch when trying to delete large documents, watching videos after waking it from sleep-mode and when installing applications from the Mac App Store. This has also been happening with OSX Lion before I upgraded it to Mountain Lion.

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    What needed to be done the day that you set up the new Mac was go into the Mac App Store (MAS), sign into your iTunes/MAS Apple ID, go to the Purchases pane and Accept the iLife apps that would have been there in a special section. That would have sent you Mac's unique identifier code to Apple's servers and verified that this Mac was eligible for the bundled iLife suite and then registered these apps into your MAS account.
    You might try going to  ~/Library/Caches/com.apple.appstore/adoption.plist, delete the adption plist, restart the Mac and then go to the Purchaes pane and see if you can Accept the apps into your account.

Maybe you are looking for

  • Best Scheme For Capturing For Best MPE Performance?

    So let's say I'm still capturing from MiniDV tape @ 720p24. What's the best scheme for capturing for best MPE performance? I have a new HP Z800 with (so far) one i7 4-core with 12 gigs of ram and an Nvidia GeForce GTX285. [moved from the FAQ forum]

  • Is Forms 10g certified with Database 11g?

    Hi: Does anybody know if Forms 10G is certified with Oracle Database 11g? Regards Ricardo

  • What languages are in the FontPack11000XtdALF_Land.msi?

    Hi, I am wondering what languages are included within that pack? There is no documentation available for this pack? FontPack11000XtdALF_Land.msi Especually interresting for me is arabic. I have the need to support arabic as language within the PDF te

  • CLASS BUILDER DOUBT

    Hi Experts, I am working on class builder.i've come across a situation.in a method i have to store  transaction number into a structure.where should i give the structure as tables statement is not allowed in oops.can anyone explain me how to do it? R

  • Search with contains where text contains a query operator such as NT

    I have a query that uses contains and the text I am searching for has the word 'NT' in it (ie CONTAINS(my_name, 'Windows NT') > 0). This and any other operator such as 'PT' causes the error ORA-29902: error in executing ODCIIndexStart() routine ORA-2