New 2014 iMac or refurb Late 2013 iMac?

Finally replacing my old iMac and read some conflicting reports on whether the latest refresh of 27" iMac were better or worse than the Late 2013 iMac. I will be getting the 3.4 with 1TB Fusion Drive. Does it matter or did they improve the latest revision.
It's not about the price, they are almost the same, it's about which is better.
Thanks!

Well, the support pages/tech specs only show the late 2013 27" iMacs - there is none listed for this year. The only 2014 is a 21":
Apple - Support - Technical Specifications
Compare those specs to the store's listings of 27" and you'll find they're the same, so I'd suggest getting a refurb as you should save some money. My last 3 Mac purchases were all refurbs. Great deals.

Similar Messages

New late 2013 iMac running slow

I purchased a new 21 in iMac in Dec 2013 (late 2013 model), and ever since, its been running very slow. Its slowness is mostly erratic and random, however very noticeable while running Office for Mac documents (Word & Excel), it takes anything from 30 sec - 1 min just to launch these apps. And equally slow while running Aperture (I am a photographer and this is my primary app). I usually end up restarting the iMac several times a day in the hope that it'll speed up. Every one who has seen me work on it has laughed that its slower than most ancient Windows machines.
Over the past few months, with support from Apple customer service, I have reformatted, re-partitioned and reinstalled Maverics on the iMac (and my MBP, which has the same issues), and done everything else that apple normally recommends as routine procedure, but no improvement in performance. The Apple support person has now stopped responding to my calls or emails.
What could be possible issues?
In my system preferences pane, there is 'Flash player' and 'Java' in the non-system apps installed. I guess we cant do without either of these.
Could there be a problem with my data? The data on my iMac is the same as on my MBP, as I transfered it via TimeMachine when i purchased the iMac.

hi Here is the report from EtreCheck generated on my iMac. Any suggestions on what the issue could be and how to resolve it are welcome. There is 200+ GB free space on the 1TB drive.
EtreCheck version: 1.9.11 (43) - report generated 4 June 2014 1:55:59 pm IST
Hardware Information:
          iMac (21.5-inch, Late 2013)
          iMac - model: iMac14,3
          1 2.9 GHz Intel Core i5 CPU: 4 cores
          8 GB RAM
Video Information:
          NVIDIA GeForce GT 750M - VRAM: 1024 MB
System Software:
          OS X 10.9.3 (13D65) - Uptime: 0 days 0:55:33
Disk Information:
          APPLE HDD HTS541010A9E662 disk0 : (1 TB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 999.35 GB (215.83 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. MacBook Air SuperDrive
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Anywhere
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.adobe.SwitchBoard.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [loaded] com.oracle.java.Helper-Tool.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.CS5ServiceManager.plist Support
          [loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [running] com.genieo.completer.download.plist Support
          [loaded] com.genieo.completer.update.plist Support
          [running] com.vladalexa.MagicPrefs.plist Support
User Login Items:
          None
Internet Plug-ins:
          AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
          FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
          AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.0.0 Support
          JavaAppletPlugin: Version: Java 7 Update 55 Check version
Safari Extensions:
          codec-M: Version: 1.0.0.1
          Evernote Web Clipper: Version: 5.9.15
          GoPhoto.it: Version: 1.10
          Omnibar: Version: 1.2
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
          Google Earth Web Plug-in: Version: 6.0 Support
3rd Party Preference Panes:
          CleanApp Logging Service Support
          Flash Player Support
          Java Support
          MagicPrefs Support
Time Machine:
          Mobile backups: OFF
          Auto backup: NO - Auto backup turned off
          Volumes being backed up:
                    Macintosh HD: Disk size: 930.71 GB Disk used: 729.70 GB
          Destinations:
                    Bhaven's 3TB [Local] (Last used)
                    Total size: 3
                    Total number of backups: 12
                    Oldest backup: 2013-12-02 22:51:14 +0000
                    Last backup: 2014-04-26 20:48:37 +0000
                    Size of backup disk: Excellent
                              Backup size 3 > (Disk size 930.71 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               1%          WindowServer
               1%          PluginProcess
               1%          fontd
               0%          System Events
               0%          imagent
Top Processes by Memory:
          180 MB          WindowServer
          139 MB          com.apple.WebKit.WebContent
          123 MB          PluginProcess
          106 MB          mds_stores
          82 MB          com.apple.IconServicesAgent
Virtual Memory Information:
          5.50 GB          Free RAM
          1.43 GB          Active RAM
          274 MB          Inactive RAM
          819 MB          Wired RAM
          365 MB          Page-ins
          0 B          Page-outs

I just bought the new late 2013 iMac. Can I get the new iWork for free?

I just bought a new late 2013 iMac. Can I get the new iWork for free? I updated it to Mavericks also. The Mac App store is showing $19.99 for each iWork component (Pages, Numbers, Keynote). I also bought the previous iWork version, if that matters. Free updates for iPhoto and iMovie seemed to show up with no problems. Maybe these are just glitches that will clear up in a couple of days?

Hi. If you want it to get updated, this should take care of it.
1. Uninstall iWork from your Mac.
2. Do a fresh install of iWork from DVD.
3. Install iWork update from Apple Downloads (direct link here: http://support.apple.com/kb/DL1563)
4. Sign into the Mac App Store, and check for updates. It should now show up as a free update. You may have to give it a few minutes (i.e. 10-15 minutes).
I've been a Windows user for years, so I know all of the tricks by now. I had hoped I would not need this knowledge for a Mac, but oh well...
Good luck.

Why does my iPad keeps connecting and disconnecting from the new late 2013 iMac

Hi there,
I've recently bought a new late 2013 iMac and ever since then I'm not able to connect my iPad 2 to it. When I do connect it keeps connecting and disconnecting again and again for some reason. The cable is fine and I've tried it with other devices. Just wondered why this is and whether you guys can help me out.
Thanks a lot!
CitizenJohnny

Hi,
I had the same problem and just found a solution. I tryed restoring all content and settings on the iPad (Settings > General > Reset > Erase All Content and Settings). It took lots of time, however it didn´t work because when I connected the iPad and iMac the problem persisted.
Then I thought it wasn´t an iPad problem but iMac OSX problem. So I searched the web for "Reinstall Mavericks" and found this http://support.apple.com/kb/PH13871?viewlocale=en_US&locale=en_US.
It also takes like 6 hours with my internet speed. Next day I connected the iPad and everything is just fine.
I described both processes because I don´t know if in the end the iPad reset helped in the solution.
Hope that helps! good luck

IBooks Author VERY slow on new, late 2013 iMac

I have an iBook that is about 100mb that I am writing. The book is tediously slow to work on. Moving widgets around takes on inordinate amount of time and sometimes blows up the formatting of the book. On my old Mac Pro Late 2008, I never experienced this.
I am running Mavericks 10.9.1 on a late 2013 iMac 3.5GHz Core i7, 16gb RAM, 500GB SSD.
Has anyone else have this problem or know a solution?
Thanks

I'm in the same problem.
iBooks is became unusable.
I have published numerous ibooks, but an old update of iBooks (already with Mountain Lion, don'tv remember when), is became very very slow, with the same Mac.
Now I have update to Mavericks (now 10.9.1) hoping to solve the problem, in vain.
I have a MacBook pro 17" later 2011, 2,5 Ghz, Intel core i7, 16gb ram and i work only with iBooks Author and OpenOffice.
Who can help me?
Thanks

Late 2013 iMac running very slow

EVERYTHING is running slow. My iphoto screensaver keeps freezing, all apps open super slow (wheel spins and spins) and iCal is not syncing properly with google calendar anymore. I'm not sure what happened in the past few weeks but it has gotten bad! My computer is only a couple months old. I ran etrecheck in hopes someone can tell me what's going on. I also ran disc utility and it found nothing wrong with my hard drive. I'm running 10.9.1, 2,7 GHz Intel Core i5, 8GB memory.
Thanks in advance!! If all else fails I will head to the nearest Genius Bar.
Here is the etrecheck report:
Hardware Information:
          iMac (21.5-inch, Late 2013)
          iMac - model: iMac14,1
          1 2.7 GHz Intel Core i5 CPU: 4 cores
          8 GB RAM
Video Information:
          Intel Iris Pro - VRAM: 1024 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 3:30:26
Disk Information:
          APPLE HDD HTS541010A9E662 disk0 : (1 TB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 999.35 GB (796.12 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Inc. iPad
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.leapfrog.connect.authdaemon.plist 3rd-Party support link
          [System] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
Launch Agents:
          [System] com.citrix.AuthManager_Mac.plist 3rd-Party support link
          [System] com.citrix.ReceiverHelper.plist 3rd-Party support link
          [System] com.citrix.ServiceRecords.plist 3rd-Party support link
          [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.google.Chrome.framework.plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
          [not loaded] com.leapfrog.connect.monitor.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
User Login Items:
          None
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 3rd-Party support link
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
          Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          Java 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          /Applications/Microsoft Office 2011/Office
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Setup Assistant:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               5%          ReportCrash
               4%          CalendarAgent
               1%          WindowServer
               0%          EtreCheck
               0%          coresymbolicationd
Top Processes by Memory:
          890 MB          CalendarAgent
          49 MB          Google Chrome
          28 MB          com.apple.WebKit.WebContent
          25 MB          Safari
          25 MB          iTunes
Virtual Memory Information:
          17 MB          Free RAM
          1.22 GB          Active RAM
          1.21 GB          Inactive RAM
          1.03 GB          Wired RAM
          993 MB          Page-ins
          97 MB          Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fr='\nRAM details:\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */   /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | sed -n '1d; /:$/{s/ *:$//;x;s/\n//p;}; /V.*[(]/{s/^[^(]*/ /;H;}; /Apple/{s/.//g;h;}'`; Pm "USB"; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia*; for f in *; do [[ "$f" =~ h$ ]] && grep -ql "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec sh
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Problem with not enough resolutions Late 2013 iMac 27"

Hi guys.
Last friday arrive to my home my new top iMac --> i7 / 16Gb / 3Tb FusionDrive / GTX 780
I always use 1920x1080 resolution display in my older iMac Mid 2010 27" but in my new iMac say this:
I need 1920x180. Is it possible change the resolution with scrips or edit one file...?
Thanks

baltwoJul 21, 2014 10:07 PM
Re: Re: Problem with not enough resolutions Late 2013 iMac 27"in response to GoldFran
Might be primitive, but free, and does the job.
the truth is you're right. Sometimes we search any solutions but this is some complicated when the best fix normally, It´s easy solution... "Okam's razor"

How I Managed to Install Windows 8.1 Pro on an iMac 27-inch, Late 2013

As is typical with many of my Boot Camp installs, this one did *not* goes as smoothly as planned. This installation was particularly troublesome, so I thought I would share how I managed to set up Boot Camp on a brand new iMac (27-inch, Late 2013) using a Windows 8.1 Pro DVD and an external Apple SuperDrive. These are the steps I took:
Download Boot Camp Support Software 5.1.5640 (http://support.apple.com/kb/DL1721)
Copy Boot Camp Support Software to empty MS-DOS (FAT)-formatted USB key
Run Boot Camp Assistant and select third option only (Install Windows 7 or later version)
Computer would reboot after Boot Camp Assistant finished but would boot back into Mac environment and not continue Windows installation
Boot computer holding down option key and select Windows (with DVD icon) and go through initial setup process (could go as far as trying to format Boot Camp partition as NTFS and then got stuck)
Quit Windows installer and reboot computer holding down option key and select EFI Boot
Run Windows installer
These same steps worked for another iMac (same model) that I set up later the same day.

Note: These types of discs or activities are not supported by DVD or CD sharing:
DVD movies.
Audio CDs.
Copy protected discs such as game discs.
Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
Burn a CD or DVD

Problem installing Windows 7 64-bit on late 2013 iMac 27"

Is Windows 7 64-bit compatible with this computer?
Hardware and software:
• Late 2013 iMac 27", 3.5 GHz I7, 16 GB memory, 1 TB hard drive (no fusion drive)
• Mac OS 10.9.1
• USB thumb drive
• Boot Camp Assistant 5.1.0
• Windows 7 64-bit install disk iso image downloaded from Microsoft
Install steps:
1. Use Boot Camp Assistant to install Windows 7 install (from iso image) and Apple Support Software (creates WININSTALL USB drive)
2. Use Boot Camp Assistant to create 50 GB Windows partition on iMac internal drive and start Windows install
3. Complete initial install steps until given option to select install partition
4. Select 50 GB partition. Error message that partition is not formatted correctly. Use Advance Options to format (presumably to NTFS)
5. Select 50 GB partition again and click "Next"
6. Get error message "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information."
7. Install quits at this point
I have successfully installed Win 7 on another computer (2010 Mac Pro) using these steps. I also tried installation on the iMac using an iso image created from my original Win 7 64-bit install disk, with the same installation error as above.
I'm wondering if Windows 7 and/or Boot Camp is compatible with this iMac. Any suggestions will be appreciated.

I am awaiting delivery on the exact model you have and have been researching how much trouble it will be to put 64 bit windows 7 ultimate on my machine when it gets here. I'm not pleased at what I've been reading so far. I have not seen the two other posts but yours is enough to concern me.
Have you also seen that 10.9.1 update may be responsible for this? I've seen where 10.9 caused some problems with the bootcamp app but then the process was completely hosed with the 10.9.1 update. Are you seeing this as well?
Being a life-long mac dude, it pains me when their stuff just doesn't work because it usually just does. ****, that's why I started on a mac in the first place.
The support site says that they come with 90 days of complimentary support. Is this not an issue they should be responsible for addressing via support? Or is that just one long wait on hold waiting to talk to somebody that won't consider this a pure apple issue?
I was also curious if your install .iso contains both 32 and 64 bit versions?

Installing Windows 7 on Late 2013 iMac w/ Fusion Drive

Sorry in advance for the long post, but I have tried to exhaust all possibilities, and bring as much knowledge about our environment to the table to avoid confusion.
Here's our goal: Install Mac & Windows on a Late 2013 iMac with a 1TB Fusion Drive
Install our Mac Image with Deepfreeze on Partition 1
Install our Windows 7 x64 Image with DeepFreeze on Partition 2
Here's why our goal cannot work out of the box:
Deepfreeze for Mac, is not supported on a Fusion Drive. Now before anyone says "just don't use deepfreeze"...we are using it, and that is that.
In order to get our existing image to work on the iMac, we had to split the Fusion Drive.
Splitting Up the Fusion Drive
We booted into Recovery, Opened up terminal, retrieved the LvGUID, deleted it, and split up the SSD from the HD.
So now, we have a 128GB SSD, and 1TB HD showing up under Diskutilitiy.
We then partitioned the 1TB HD, into two, 500GB Partitions. One for Mac OSX 10.9.4, and the other for Windows.
The 128GB SSD is going to be used for scratch space, temp, etc. And is irrelevant at this time.
Deploying our Mac Image
After splitting the Fusion Drive, we netbooted and installed a "NetRestore" of our image. Worked completely fine, no issues. DeepFreeze Works fine, the 128GB SSD shows up just fine, and the other 500GB Windows Partition shows up fine. All drives / partitions can be written to with no problem.
Deploying our Windows Image
Deployed our Windows Partition image as we have done in the past, by booting into a windows PE Disk. (We have other various 2009, 2010, and 2011 iMacs across campus, with NO FUSION DRIVES installed, and dual boot them successfully using the same procedure. Minus the splitting of the fusion drive part of course) After the Windows image is deployed to the windows partition, we then boot it up to a Windows 7 Install disk to fix the MBR, Bootrec, and BCD options to allow it to boot properly. Here's where we run into issues: Upon getting the Windows 7 Install screen, the USB Keyboard and Mouse, DO NOT WORK.
Here's the options we've tried to get them to work properly
1. Tried another known working Mac USB Keyboard & Mouse = Failed
2. Tried a known working Windows Keyboard & Mouse = Failed
3. Plugged Just a known working Mac Keyboard into each USB Port to see if recognized = Failed
4. Plugged Just a known working Windows Keyboard into each USB Port to see if recognized = Failed
5. Plugged Just a known working Mac Mouse into each USB Port to see if recognized = Failed
6. Plugged Just a known working Windows Mouse into each USB Port to see if recognized = Failed
7. A Windows 8.1 Recovery USB will boot and the USB Mouse & Keyboard are recognized and installed! (YAY!!) However, we cannot repair a Windows 7 install with Windows 8.1..
BootCamp Drivers & Support Media
Downloaded the Current BootCamp Support drivers to enable the USB and other various drivers to be loaded during setup (Placed the $WinPEDriver$ and AutoUnattend.xml, and BootCamp folder on the Root of a USB, and modified a Windows7 Installation disk and placed on the root as well) The drivers do not load. Have also placed on a brand new USB2, and USB3 flash drive formatted at FAT32, to see if that made a difference, which it did not. The BootCamp USB made within Mac, it loads saying "Now booting into Boot Camp Assistant Created USB Drive..." or something like that (Don't remember the exact Message)
Side Note:
Restored Fusion Drive to its original State, and booted from the BootCamp USB drive, still no usb Mouse & Keyboard Support.

I have same issue
Tried everything differend hdd,ssd as well
Basically when trying instal win 7 via iOS maverick when reboting and windows booting to the first scree everything freezing cant do much.
Also tried install clear ssd without any system, but soon after format ssd or hdd I have error that I cant use this disk to install windows!!!!!!!!!!!!!!!!!
What is funny Windows 8 installing without any problem!!!
what is going on APPLE??wher is support
This issue I have only on Late 2013 on my other Late 2012 this issue not exist and everything working as should.

IMac (27-inch, Late 2013) with iMac (27-inch, Late 2012) in TDM issue

With the late-2013 iMac 27" (3.5 GHz, 32 GB RAM, 3 TB Fusion, Mavericks 10.9.4) as the primary and the late-2012 iMac 27" (3.4 GHz, 16 GB RAM, 3 TB Fusion, Yosemite Beta 10.10) in TDM, the screen on the target display blinks off and on (goes black and comes right back after a split second). It happens intermittently, regardless of which Thunderbolt port is used to connect the two computers. The other Thunderbolt port on the primary is used to connect two external FW800 drives via a Thunderbolt-to-FW800 adapter.
Through exhaustive testing, and in constant consultation with AppleCare senior advisors, I have seemingly ruled out all obvious potential hardware or software culprits:
An AVR is feeding both computers consistent power.
Each computer's RAM and video cards have been tested with TechTool Pro 7: everything passed.
The Thunderbolt cable has been replaced.
Reset the NVRAM and SMC on both computers (though with all the testing I've done since, it might not hurt to do this again).
Both computers have been running the latest version of OS X (the target display is currently running Yosemite Beta).
Made sure to enable TDM after the primary iMac has completed its full startup process.
Turned down the display brightness on both computers.
Trashed the com.apple.windowserver.plist file on the late-2013 iMac.
None of these steps have resolved the problem and I am having NO other issues with either computer. I'm stumped, as are the AppleCare senior advisors I've been working with. This issue has been present since I first connected these two computers this way. Design flaw not revealed in testing? Problem part not revealed in testing?
Anyone here seen anything like this or have any ideas of what else I can try? Help would be greatly appreciated!
Thanks,
Dana

Purchase a Windows PC?? Gasp, indeed! No, after months of software and hardware troubleshooting with an AppleCare senior advisor, and me refusing to believe my brand new 2013 iMac could have a hardware defect, I finally took my entire configuration (both iMacs, voltage regulator, back-UPS) in to my local Apple Store. They were able to replicate the issue, but then misdiagnosed the problem and replaced an internal display cable. Within minutes of reconnecting everything at home, the problem returned. So AppleCare sent an authorized service tech to my home to replace the logic board. That seems to have finally solved the problem. Inconveniently, the tech didn't have what he needed to flash the new logic board with my serial number right then, so I had to wait two weeks to get that done. It did finally get done though, and now all is well.
Good luck with your issue!

Cannot install Win 8 on a late 2013 iMac using bootcamp on 10.9

I'm trying to install Win 8 on a late 2013 iMac (purchased a couple of months ago)
I have a win 8 pro DVD, but obviously there is no DVD in this iMac. I usally use the DVD drive in my older 2009 iMac for any disk based installs but I can't appear to use it here.
I followed the instructions and downloaded a Win 8 Pro ISO from Microsoft to use with my authentication code, created a bootable USB using bootcamp, created the partition and rebooted. Once I'd entered the code I get to the install location but it says I cannot install on the partition created by bootcamp. Even if I format the partition it says I need a GPT drive but I have MBR, so won't let me install.
I tried several suggestions including creating aprtitions in various other programs and once I even got past that screen, but as soon as it tried to install I got another error saying the MBR was formatted incorrectly and it failed.
I had no issues installing Win 7 via bootcamp on the older iMac, but this one has me stumped. I used to think I knew a bit about computers, but I'm fairly new to Mac related issues as the older iMac has always just worked.
Any help would be greatly appreciated.

Hello,
I just installed Windows 8.1 on my Late 2013.
There are just a couple of things I had to do that deviated from the Boot Camp Installation Manual.
1. I downloaded my copy of Windows 8.1 as an ISO image AND as a bootable USB from the Microsoft site.
Not sure why I did that but it came in handy because Bootcamp was taking a very long time to copy the ISO onto the USB stick..
The ISO copying seemed to freeze up, but it's likely that it was just taking a long time, probably 20mins.
So, instead of waiting, I took the contents of the the USB startup stick and simply moved them over to the stick that Bootcamp had formatted for the ISO copy (I cancelled that copy function and deleted any files that had copied but didnt complete).
Once that was done, the machine rebooted from the USB stick and began the normal Windows setup process.
All went very smoothly except that my mouse was not working.
2. To get around the mouse issue, I simply plugged in a MS USB Mouse and it worked immediately.
The Bootcamp manual advised that the way around this was to 'click in upper right corner and search for Bootcamp'. Problem was, it was nowhere to be found.
So, using my MS mouse, I navigated to the 'DESKTOP' icon in Win 8.1 and found File Explorer, which showed my USB stick connected along with Bootcamp and the MS Support File (i.e. All the Apple Drivers).
I began manually clicking on all the driver files until realizing that there IS a Bootcamp executable which will automatically install the drivers for the Nvidia card, keyboard, camera, mouse, etc....
Once that was done, my installation was completed.
The entire process took about an hour, but now that I've done it, it really shouldnt take much more than 45 mins.
I have the late 2013 iMAC, with the GTX780M and 1TB Fusion Drive i5 Quad Core.
For those who are leery about doing this, please note that I'm a PC 'lifer' and this is my very first go-around with doing anything on an Apple product.
It all went much more smoothly than I could have imagined, but if you are not a PC person, you might be a little challenged finding the Bootcamp in File Explorer or doing anything in Win 8.1 to get over these minor hurdles.
Good luck!
I'm looking forward to getting STEAM up and running to see how this thing games!

Will Late 2013 iMac boot from Snow Leopard External Drive?

Hey gang-
Got a new late-2013 iMac for Christmas (yayyyy!!)
I plan on running Mavericks for day-to-day use, but there are a few old Power PC apps that I occasionally need to run. Does anyone know if the new iMacs will boot from an external drive running Snow Leopard? I have an external Firewire drive with Snow Leopard on it and I'm wondering if the new iMac will boot from it if needed.
Thanks!
Dave

Thanks gang. No worries- I keep an older Intel MacBook with Snow Leopard on it and I suppose it will do in a pinch.
Cheers!
Dave

More frequent Kernel Panics on late 2013 iMac

For the last couple of weeks I have been experiencing random iMac restarts with the kernel panic message (http://core0.staticworld.net/images/article/2013/02/kernel-panic-pre-ml_300-1000 24407-medium.png). I have not installed anything suspicious, I have verified the HDD, everything is ok, done the hardware test after a restart (the D button) with no issues found and when I go to the Library, Logs there is no kernel panic report nor any other information on the issue. It seems as the aforementioned message just appears, the iMac restarts and comes back to normal without any additional problems/problem information.
I have late 2013 iMac with os 10.10, everything up to date and fabric Ram memory with a lot of free space on the HDD.
I would really appreciate if someone could give me some pointers or let me know what this could be. Thanks a lot!

Here it is:
Anonymous UUID:       C031B16F-4CEA-99A0-BCFF-4172A022A598
Fri Oct 24 22:52:20 2014
*** Panic Report ***
panic(cpu 2 caller 0xffffff800b41e80a): Kernel trap at 0xffffff7f8d1f80e8, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x0000000166b9b000, CR3: 0x000000024205503a, CR4: 0x00000000001626e0
RAX: 0xffffff801e813c00, RBX: 0xffffff801e813c00, RCX: 0x0000000000000000, RDX: 0x7fffffffffffffff
RSP: 0xffffff8115763cd0, RBP: 0xffffff8115763cf0, RSI: 0xffffff801e813c00, RDI: 0xffffff801e10ba08
R8: 0x00000000000019e4, R9: 0xffffff800fc68148, R10: 0x0000000000000000, R11: 0x000000000000063c
R12: 0x1000000000000000, R13: 0x0000000000000003, R14: 0xffffff801e10ba08, R15: 0xffffff802cd55000
RFL: 0x0000000000010206, RIP: 0xffffff7f8d1f80e8, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000166b9b000, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff810dee5e10 : 0xffffff800b33a811
0xffffff810dee5e90 : 0xffffff800b41e80a
0xffffff810dee6050 : 0xffffff800b43a443
0xffffff810dee6070 : 0xffffff7f8d1f80e8
0xffffff8115763cf0 : 0xffffff7f8d1f99b2
0xffffff8115763d20 : 0xffffff7f8d2041f1
0xffffff8115763d50 : 0xffffff7f8d29f940
0xffffff8115763d80 : 0xffffff7f8d202990
0xffffff8115763db0 : 0xffffff7f8d202a05
0xffffff8115763dd0 : 0xffffff800b8ff2eb
0xffffff8115763df0 : 0xffffff800b3ee455
0xffffff8115763e10 : 0xffffff800b33e91c
0xffffff8115763e40 : 0xffffff800b3235a3
0xffffff8115763e90 : 0xffffff800b333e8d
0xffffff8115763f10 : 0xffffff800b40a142
0xffffff8115763fb0 : 0xffffff800b43ac66
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAcceleratorFamily2(156.4)[20DDCE61-E3EC-3CC1-8B79-170CEF2B603 A]@0xffffff7f8d1e3000->0xffffff7f8d24ffff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f8bb24000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8bdec000
         com.apple.GeForce(10.0)[26D2EC64-4AF8-32C8-BF74-5B1E80772FAA]@0xffffff7f8d25e00 0->0xffffff7f8d2f3fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f8bb24000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7f8be33000
            dependency: com.apple.nvidia.driver.NVDAResman(10.0.0)[53CC0E05-7382-336C-8239-AE884D6CA71A ]@0xffffff7f8be49000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8bdec000
            dependency: com.apple.iokit.IOAcceleratorFamily2(156.4)[20DDCE61-E3EC-3CC1-8B79-170CEF2B603 A]@0xffffff7f8d1e3000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x000000000b000000
Kernel text base: 0xffffff800b200000
__HIB text base: 0xffffff800b100000
System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61)
System uptime in nanoseconds: 29948396975274
last loaded kext at 15673659043007: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f8dd7d000, size 69632)
last unloaded kext at 17607432106459: com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0 (addr 0xffffff7f8dd69000, size 81920)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.37
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleMikeyDriver 266.5
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleIntelHD5000Graphics 10.0.0
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 1.7.3
com.apple.GeForce 10.0.0
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleIntelFramebufferAzul 10.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AirPort.Brcm4360 900.19.8
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleBluetoothHIDKeyboard 175.5
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.kext.triggers 1.0
com.apple.driver.IOBluetoothHIDDriver 4.3.0f10
com.apple.driver.AppleMultitouchDriver 260.30
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.iokit.IOSurface 97
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleThunderboltEDMSink 4.0.2
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.nvidia.driver.NVDAGK100Hal 10.0.0
com.apple.nvidia.driver.NVDAResman 10.0.0
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
System Profile:
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Thunderbolt Bus: iMac, Apple Inc., 23.10
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463531323634485A2D314736453220
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463531323634485A2D314736453220
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: MT1836
USB Device: USB 2.0 Hub
Serial ATA Device: APPLE HDD ST1000DM003, 1 TB
Model: iMac14,2, BootROM IM142.0118.B07, 4 processors, Intel Core i5, 3.2 GHz, 8 GB, SMC 2.15f7
Network Service: Wi-Fi, AirPort, en1
Graphics: NVIDIA GeForce GT 755M, NVIDIA GeForce GT 755M, PCIe, 1024 MB

Late 2013 iMac and image retention issues

I just purchased a certified refurb Sept 2013 iMac 27" 3.5GHz i7 3tb. I've already read the image retention advice on the Apple website (http://support.apple.com/kb/HT5455) and the problem keeps showing up. Additionally, I don't feel that I should have to keep such a close eye on my screen on such a new machine. I'm running a screen saver when I'm not on the computer, and I shut the display down if I'm leaving the computer for the day. I can't even have a desktop picture without seeing a burnt in image of the picture on my screen. Any help would be appreciated.

Since it has the same warranty as a new machine, contact Apple's Support and let them deal with problem. If less than 14 days old, you can return it w/o any questions being asked.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

New 2014 iMac or refurb Late 2013 iMac?

Similar Messages

Maybe you are looking for