New 27" iMac (2012) with Thunderbolt Display = Bezel Alignment?

I know the previous generation iMacs (16:10 screen aspect ratio) did not physically align with LED/Thunderbolt displays when placed side-by-side. Since the new iMacs have a matching 16:9 screen, I am wondering if the two screens would physically align properly when used as dual displays?

There is nothing wrong with Apple's refurbished machines, you're assuming they are returned with problems. These machines come with the same 1 year warranty as a new machines and are also eligible for AppleCare the same as a new machine. These machine are tested more than a new machine and if any issues are found they are fixed and re-tested. Apple puts machine into the refurb program for many many reasons, these can be new models were introduced and they're clearing old inventory, or scenarios like a husband bought new machine and the wife made him return it for spending money, or a possible defect. Don't take my word for it though search and you'll see Apple's refurbished machines have a terrific reputation.
However I'm getting from reading your posts you are looking for reasons to not get a Mac and stay with Windows. If that's the case they by all means stay with what you know.

Similar Messages

  • IMac 27" with Thunderbolt Display connected, Boot Camp Problem

    Hi everyone.
    Let me start off by saying that I'm using a late 2012 iMac 27", 3.4 GHz i7, 680MX, 32 GB RAM, 1 TB Fusion, with a Thunderbolt Display connected.
    I installed Windows 8 via Boot Camp, and it works just fine. Here comes my problem:
    I have dual screens and I play Minecraft. Minecraft's full screen is basically crap, and therefore I disabled the iMac display. I used Windows-button+P to use only the secondary display. This turns the iMac display off entirely, and leaves the Thunderbolt Display on. Note: This is not possible in Mac OS X. Then I played a little Minecraft. When I was done, i wanted the main iMac display to come on again. I then used Windows-button+P again, to turn both displays on. Then bam, totally looked like the iMac display was broken. See the images below, to see how it looks:
    1) http://cl.ly/image/1p2e3c1Z1z1C
    2) http://cl.ly/image/2g0n1M1Y0t0g
    3) http://cl.ly/image/2Q2P1c1J220d
    4) http://cl.ly/image/113b3K2O1Z43
    5) http://cl.ly/image/1q2v1s1n3w1f
    This image-retention-like stuff stays there, even if I reboot into Mac OS X, and then it eventually disappears. I can reproduce this, by doing the same thing again, (windows-button+p) but only in Windows, because that you cannot turn of the main display in Mac OS X. Maybe this is the reason why you can't?
    Anyone can tell me what I can do? I guess I could try reinstalling, but it seems more like a hardware issue, than a software issue.
    Thank you for your time, and thanks in advance.
    Another note: I'll try doing the opposite, and see if it happens on the Thunderbolt Display as well. (Windows-button+P, and then only using the main display)
    //ifraaank

    Ok, I am marking this as "answered", as I have solved it myself, while I still have no clue what lead to the problem in the first place.
    I've been on the phone with Apple Care today, and they were as clueless as I was and had never heard of this before.
    After we tried the usual stuff (unplugging all wires, PRAM Reset, SMC Reset), to no avail, I was told it could well be a hardware problem and that I should have the iMac examined at the Genius Bar, so an appointment was made.
    I'll cancel that one though, as I was able to cure it by myself for now (and carrying around a 27" iMac in Munich's busy downtown pedestrian zone is not really fun).
    This is what I did (and I'm so happy I tried):
    In Display Settings, I switched the external display back to landscape mode and selected "mirror displays".
    Then I rebooted, and voilà, the problem was gone (Apple logo on white background was showing).
    I switched it back to 90 degrees rotation and no mirroring, and it's still all ok.
    I booted Windows 7 in Bootcamp, then back to Snow Leopard, and it's all still fine.
    I can still only wonder what messed this up in the first place, but for now I'm happy.

  • Can I conect iMac 2012 with thundelbolt to iMac 2008 mini display port use this iMac like second monitor.

    Can I conect iMac 2012 with thundelbolt to iMac 2008 mini display port use this iMac like second monitor.

    This Apple article:
    What are the requirements for TDM?
    suggests that older iMac do not support Target Dispaly Mode.

  • Is it possible to use a new iMAC 2011 (with thunderbolt port) as a passive screen with a Macbook (MacBook5,1 - End 2008) ?

    s it possible to use a new iMAC 2011 (with thunderbolt port) as a passive screen with a Macbook (MacBook5,1 - End 2008) ?

    No, you would need to upgrade the MacBook to a 2011 MacBook Pro that also has Thunderbolt.
    Roger

  • What is the difference between the new ipad and ipad with retina display?

    what is the difference between the new ipad and ipad with retina display???

    This compares the two new iPads with the previous Retina iPad:
    http://www.engadget.com/2012/10/23/ipad-mini-vs-2012-ipad-whats-different/
    Regards.

  • What display is more suitable for a macbook pro, an iMac or a Thunderbolt Display?

    I am currently deployed in Afghanistan and will be purchasing a Macbook Pro upon my return. This will be my first time owning a mac as I have always been a Windows user so I am unaware of which product works the best with one another. I am curious to know though which display will work the best with a macbook pro; an iMac or a Thunderbolt Display? Any guidance or advice anybody could offer would be greatly appreciated, thank you.

    Both work very well with the MBP.
    In essence the iMac is the ThunderBolt Display with an added Mac computer inside.
    If you don't need a second Mac computer save the money, get the Display and invest the money in more RAm or a bigger harddisk for the MBP.
    Stefan

  • Need wireless monochrome laser printer for home office to use with new mac book pro with retina display. I also have to have networking capability. Suggestions for economic printers?

    HI, I need to buy an economic monochrome laser that will work wirelessly with new Mac Book Pro with Retina Display inmy home office. Any suggestions? I was considering the HP 1102W or Brothers HL22700W but have heard that they do not work with Mac 10.6.1 or upgrade. Need to try to get his done asap so I will appreciate any and all feedback!

    http://www.shopping.hp.com/en_US/home-office/-/products/Printers/Printers

  • I can't add printers to my new mac book pro with retina display

    I am trying to set up my HP wireless printer to my new mac book pro with retina display.   I can't get it to work!  I have down loaded the latest driver for my printer, and when I go into the printer area and try and add the printer, nothing shows up and it won't let me even add it.   I can't seem to connect my mac directly to my printer either as I must need a different cord as there does not seem to be a port for the "phone like jack" that I could fall back on with my old Mac.    My printer prints great so I hate to just buy a new printer, but I can't get this to work.   My wireless router is located in the basement, far away from where I keep my printer so it also makes it hard to rest everything.  I even bought the blue tooth adaptor for the HP printer thinking that would solve it all, and nope!  Any help would be greatly appreciated!

    I have made some progress.... I can print wirelessly from my printer now, but I can't set the printer itself to be wireless.  I had to move my printer downstairs to where my router is...which is not that convient.   I printed up the page you asked about....and as expected, it says it is off line and there is no IP address.    So now I need to figure out how to make my printer itself wireless.  I did download the HP driver I needed...but I can't access it to do anything else.  It seems l like I am missing a step... or I need to hook up my computer itself to the printer to help get the printer to be wirelss, but I can't hook it up because there is no port for me to do that (no port that looks like a phone jack).  I am guessing I would need a different type of cord, but I am not sure what kind of cord that would be! Ugh!

  • I would like to convert my LPs to digital on my new mac book pro with retinal display . How can i do this?

    would like to convert my LPs to digital on my new mac book pro with retinal display
    . How can i do this?

    The new Mac's do not have analog audio in so you will have to go with a USB audio in device or else if you do not yet own a turntable (or are looking to upgrade) you could get a turntable that has USB out.
    The Griffin Technology iMic USB Audio Device is a low cost consumer grade solution if you already have a turntable.
    For recording I use Audacity: Free Audio Editor and Recorder which does a good job and has the ability to run the audio signal through various filters.

  • I have a mac Book Pro and and iMac, both with Thunderbolt. I connect my thunderbolt cable to each and each tells me that it is connected to the other, but when I try secondary screen in Aperture it is still grey and not available, what do I have to do to?

    I have a Mac Pro and an Imac, both with thunderbolt. When I connect the two together with a thunderbolt cable each recognises the other as shown in the system report, but when I try to use second screen in Aperture, the option is still grey and unavailable. What do i have to do to activate second screen in Aperture via thunderbolt?

    In actual fact this seems a bigger problem than I thought. Linking the two computers via the Thundernolt cable and selecting cmd F2 no longer shares the screen at all and Apple say it may not be able too in Mointain Lion - What are they playing at, hundreds of customers link computers together and share the screens - Lets hope they are wrong and tell us what we need to do other than move back to Windows.

  • Major Issues with Thunderbolt Display in Yosemite

    I have a MacBook Pro (Retina, 13-inch, Early 2013). I'm having issues with thunderbolt display connectivity despite recent Thunderbolt Firmware update. The sleep wake function is not working and display with shut off sporadically.
    MacBookPro10,2   Processor Name: Intel Core i7   Processor Speed: 3 GHz   Number of Processors: 1   Total Number of Cores: 2   L2 Cache (per Core): 256 KB   L3 Cache: 4 MB   Memory: 8 GB

    Same problem here. I was so excited to see a firmware update this morning for my mac pro, and sure enough as i sat here, the display went black again.

  • OS X 10.7.2.2 issues with Thunderbolt Display

    Help! With Thunderbolt display, Mac-mini and OS X 10.7.2.2 I get a blank screen when mini reawakens from sleep. Moving the cursor around like a paint brush reveals a portion of the underlying log-in screen. Once I uncover my user icon and log-in, my desktop will appear and function normally!!!
    IS this caused by (1) the Thunderbolt display, (2) the latest Lion update or a combination of both ? I experienced no problems with older display and Lion 10.7 !!
    Any solutions/recommendations?

    Hello Drew,
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

  • Is there a new 2013 Macbook Pro with Retina Display being released anytime soon ?

    Is there a new 2013 Macbook Pro with Retina Display being released anytime soon ?

    no one here knows anymore than you.  We'll find out when Apple announces it.

  • Can new MacBook Air power 2 Thunderbolt displays?

    Can new MacBook Air power 2 Thunderbolt displays?

    Asked a similar question elsewhere. According to Apple Japan pre-purchase support, the answer is 'No, it doesn't have enough power in the graphics card". Big pity.

  • Does the new 2011 iMac come with a osx lion preinstalled or a osx lion USB drive

    Does the new 2011 iMac come with a osx lion preinstalled or a osx lion USB drive

    I just bought the 17" MacBookPro the other day with Lion preinstalled and wanted to install Lion on my iMac. It makes sense that I should be able to upgrade for free you spend all this money on Apple products, give us apple supporters a break. Maybe this is something that Apple overlooked and in the future there will be a fix.
    I read up on forums and I finally called AppleCare they said that I should be able to install Lion on 5 other computers but only if purchased in the store, this doesn't make any sense. I feel like I already purchased a copy and that copy should be able to be installed on another computer. It should be as simple as logging in app store with the same apple ID and it be there to install on my iMac. If apple is trying to make everything user friendly, device syncying and convenient well it's not; this is just something they think of. I refuse to pay $30 for another copy. Fix this issue APPPLE!!!
    Because if those who bought computers in July that didn't have Lion preinstalled can obtain a free copy to install in 5 computers. I should be able to do the same with the Lion that I bought preinstalled it's just make sense to me.

Maybe you are looking for