New 27 inch iMac used as monitor for PS3

Greetings!
I am trying to use my 27 inch iMac as a display for the Play Station 3. I have a Mini DisplayPort to HDMI cord connected to both and the iMac does't do anything. I looked at the display in system preferances and there is no AirPlay Mirroring device connected. I also tried to press Command+f2 and there was no change. Is there anything else to try? Thanks.

Hello, sorry to report...
Mid 2011s & up need Thunderbolt!???
http://support.apple.com/kb/TS3775

Similar Messages

  • Can i use my new 2011 21.5 inch imac as a monitor for my ps3?

    hey guys well i really want to use my 21.5 inch imac as a monitor for my ps3 i know that there are devices such as the kanex xd and some belkin thingy that converts hdmi to mini display port, but guys i really want to know
    thanks for your help!!
    much appreciated

    Have a read at this thread with almost same questionhttps://discussions.apple.com/message/16550956#16550956
    Currently no solution but hopefully in the future.
    The Kanex XD only works with earlier iMacs not with ThunderBolt until Kanex updates it.
    Stefan

  • Can I use 24 inch iMac as a monitor for MBP

    I have a Mid 2007 iMac and want to use it as a monitor for a MacBook Pro or a Mac Air, is this possible??

    Yes, all Intel Macs can at some point offer screen sharing.  The faster the connection, the better the screen sharing speed.   Mac OS X 10.5 iChat offers screen sharing.  Mac OS X 10.6 and higher Sharing System Preferences offers Screen Sharing.   VNC is an alternative.  But it must initially be configured when both machines have working displays attached.  Once done, the machines that have their display shared don't need an external display.

  • Flickering on new 55 inch TV used as monitor for MacPro 3.1 VGA connection

    I have a Mac Pro 3.1. as the main home computer connected to the TV.
    It worked fine with my old Samsung 42 inch TV as a display using a VGA connector with the standard included apple convertor.
    I recently purchased a new Samsung hd 55 inch screen, and, whatever the settings, I get a terrible flicker on the screen, when using the VGA PC connection.
    I am using a 1280 x 1024, 60 hz resolution which should be supported. although I have tried all the other ones too.
    looking at the back of the Macpro, it looks like the panel where the connectors are in could be replaced, ideally with a new HDMI outlet which would doubtless solve the problem. Can this be done?
    Otherwise is there any way to solve the problem using the existing setup. IS there something else on the MacPro that I can replace upgrade repair to solve the problem?
    Is there a piece of software that would help?
    I use the main screen for slide shows, movies, iTunes generally and also for other computing functions so this is really irritating...
    Any susggestions greatly appreciated

    this is what is in my Slot 1
    NVIDIA GeForce 8800 GT:
    Chipset Model: NVIDIA GeForce 8800 GT
    Type: Display
    Bus: PCIe
    Slot: Slot-1
    PCIe Lane Width: x16
    VRAM (Total): 512 MB
    Vendor: NVIDIA (0x10de)
    Device ID: 0x0602
    Revision ID: 0x00a2
    ROM Revision: 3233
    Displays:
    Display Connector:
    Status: No Display Connected
    VGA Display:
    Resolution: 1280 x 1024 @ 60 Hz
    Depth: 32-Bit Color
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported

  • Hi. Can I use a new 27 iMac as a monitor for my PC?...

    ... Not as a dual setup, but as a sole monitor to flick between the two?
    I have a PC running windows 7 with a Nvidia 560ti GPU.
    Due to lack of space, I would like to use the iMac as both an iMac, and then flip to the PC for gaming. Is this possible?
    I have googled it and only found answers for dual screen setups. Thanks
    Scott

    Depends on the iMac.  What you need is something that supports video input into the Thunderbolt ports.  If you can find that, then you can view it in the iMac.   http://support.apple.com/kb/HT3924 explains it further.
    Mind you, I still think it can be just as fast directly on the iMac, since there is no hardware being emulated as software.

  • HT1338 is there a way to use an iMac as a monitor for a Mac Book?

    I want to use my new 27" iMac as a monitor for my MacBook Pro. How can I do this?

    It's very easy. You just need a Thunderbolt wire and then connect your MBP with your iMac. That's it.

  • Using iMac 21.5" 2009 model as a monitor for PS3

    Hello Apple people,
    I have a new iMac 21.5" released Oct 2009.
    The thing is, I want to use the iMac as a monitor for my PS3 (while the wife uses the HD TV).
    I know there are devices for the 27" iMac, but does anyone know of any devices/software that would allow me to do this?
    Many thanks in advance.
    Kieran

    Fortuny answered your question. No, there is no such device for the 21.5" iMacs. They do not have any sort of video in-port.
    The only method for getting video into most Macs is with some sort of FireWire or USB device. I have not heard of such a device for using a Mac's display with 3rd party video devices such a SPS3, Xbox, etc.
    Dah•veed

  • Using new iMac as a monitor for PC Laptop

    Greetings,
    I am trying to use my new iMac as a monitor for my work laptop (compaq). Can this be done? If so, how do I do it? Thanks in advance for any help.
    M.

    As tintinlad says there are software solutions that use VNC connections (link). Hardware solutions exisit but only at Standard Definition TV quality. 
    http://www.applefritter.com/holygrail
    BTW, Apple stopped selling iMac G5s in Jan 2006. Your new iMac is presumably an Intel iMac instead.
    mrtotes

  • HT3924 using a 24 inch imac as a monitor

    Can I use a 24 inch (early 2009) Imac as an additional display with the latest (2013) Imac??

    Welcome to the Apple Support Communities
    Only 27-inch iMacs and Mid 2011 and newer iMacs can be used as a monitor. However, you can use ScreenRecycler to use your 24-inch iMac as a monitor, but it works through the network, so it will be slow

  • Can you use your imac as a monitor for you mac book pro laptop?

    Can you use your imac as a monitor for you mac book pro laptop?
    I have two computer one being a new mac book pro and the other being a slightly older imac desktop. I am wanting to know if you can use the desktop as a screen for my mac book pro. I just to mirror the laptop onto the desktop because it is more powerful, instead of getting another display for my laptop.
    Is this possible and what connections do I need?
    Thanks

    Hello, we need more info on the iMac, not positive but I think it requires a 2010 or newer iMac & a Mini Display Port cable.
    So we know more about it...
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4

  • I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

    I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini with a thunderbolt cable. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

    Hi there,
    The simplest way is to drag it across wirelessly using the 'Airdrop' application once both computers are near one another. 'Airdrop' can be found near the top, on the left hand side menu, within 'Finder'.
    AJ

  • Can i use my imac as second monitor for my  pc / notebook

    Can i use my imac as second monitor for my  pc / notebook

    Without any knowledge of the year machines you have it's impossible to answer that question. iMacs adn MBA's have been around for many years now so we have no idea of the exact specs your machine have. Remember when posting you need to be complete and paint a picture for us as we aren't there to look for ourselves. Your question should be  posted something like:
    " I have a 2011 27" iMac and a 2009 MacBook Air, can I use the iMac as an external display for my MacBook Air?"
    BTW what you are referring to is called Target Display Mode. Apple does support that on some 2009-2011 iMacs. You can find additional information at:
    http://support.apple.com/kb/HT3924
    http://support.apple.com/kb/TS3775

  • Using my iMac as a monitor for Mac mini.

    I'd like to use my mid 2010 27" iMac as a monitor for my Mac mini. Is this possible with thunderbolt?

    You'll use the thunderbolt port on your mini and connect to the mini display port on the iMac. use a mini display to mini display cable.
    Target Display Mode: Frequently Asked Questions (FAQ)

  • Can I use my Imac as a monitor for my Macbook Air?

    Can I use my iMac as a monitor for my Macbook Air?

    Without any knowledge of the year machines you have it's impossible to answer that question. iMacs adn MBA's have been around for many years now so we have no idea of the exact specs your machine have. Remember when posting you need to be complete and paint a picture for us as we aren't there to look for ourselves. Your question should be  posted something like:
    " I have a 2011 27" iMac and a 2009 MacBook Air, can I use the iMac as an external display for my MacBook Air?"
    BTW what you are referring to is called Target Display Mode. Apple does support that on some 2009-2011 iMacs. You can find additional information at:
    http://support.apple.com/kb/HT3924
    http://support.apple.com/kb/TS3775

  • Can I use my iMac as a monitor for a PC? If yes, how

    Can I use my iMac as a monitor for a PC? If  yes, how?

    That is called Target Display Mode and you are lucky it's supported in the late 2009 & 2010 27" iMacs. Apple had directions in:
    http://support.apple.com/kb/ht3924

Maybe you are looking for

  • Importing xml driven swf file -- is it asking for too much?

    I want to import an ActionScript3 / xml driven swf file into Catalist, but it only imports the swf file. I have placed all the external images and the xml file that calls them into the same folder as the swf and the catalist files, but the playback s

  • Cross company codes CO area

    Hi, What are the pre-requisites to be taken care seriously for a setup where more than one company codes will be assigned to a single controlling area (business in europe and India). The assigned company codes will have different currency and differe

  • IOS 4.3 not showing multigestures

    Has anyone installed 4.3. And not see the multi gestures selection in settings. How can I fix the software to show it?

  • Problem With POV

    Hi,   when i am applying f4 search help I am getting error like SAP paging Overflow When Storing Data in ABAP /4 Memory.     here is code.. TOP. PROGRAM  SAPMZTEST1. TABLES : MSEG. CONTROLS : TBC1 TYPE TABLEVIEW USING SCREEN '0100'. TYPES :         B

  • In ESS we are getting SAP GUI screens instead of web screens??

    Hi, How the problem has come up--- We have transferred the production data and OS into test server and changed the test server IP address to production IP address after shutting down the production server. Which means that now ITS/ESS will be pointin