New 3D Postcard from Layer option suddenly disabled

I just discovered that nearly all of the options in my Photoshop's 3D menu are disabled. It's been a few weeks since I tried to use them, but during that time I upgraded from Production Premium CS4 to Production Premium CS5. Both have Photoshop Extended, so the 3D options should be enabled. Thinking that it might be a CS5 issue, I opened the project in CS4 and saw that the 3D options that worked a few weeks back were now disabled too. Any ideas as to why this is happening and what I might be able to do to fix it?
I read somewhere that it might be an issue with outdated drivers for the graphics card, so I downloaded the newest ones and installed them. Unfortunately it did not help. The graphics card is an NVIDIA Quadro FX 3700.
Any help would be greatly appreciated!
-E

Eric D 2010 wrote:
I read somewhere that it might be an issue with outdated drivers for the graphics card, so I downloaded the newest ones and installed them. Unfortunately it did not help. The graphics card is an NVIDIA Quadro FX 3700.
Did you get them specifically from nVidia.com? What version do you have now?
What OpenGL settings are showing in Edit - Preferences - Performance in Photoshop?
-Noel

Similar Messages

I have a new iPad 4 from Christmas and suddenly the sound stops. I have to shut down the iPad to restore it. Has anyone else had this problem?

I am interested in knowing if anyone else has had a sound problem with a news ipad4. In the last two days, my IPad sound has just stopped. I can get it back by doing a complete shutdown of the iPad. I will be returning it to the store since I am certain this should not happen. Just wondered if this is a common problem. Thanks!

Is it formatted Mac OS Extended (journaled)? If not do so using Disk Utility.
P.S. If you store live fies on an external disk you need to back it up just like data on your internal disk or if and when that disk crashed then, poof, all your music will be gone.
If you do not already have one, purchase an external drive to dedicate to Time Machine backups. Then in the Time Machine exclusions list, remove the image of the music offload disk. Then both your internal and external live drives will be backed up to the Time Machine disk.

Disable "Import From Enterprise" Option

Hi All,
I am using trial version of Xcelsius Engase Server 2008. There are some issue with this.
1) I want to connect this with Live Office. While In Manage Connection option i am not getting Live Office connectivity.
2) In file Menu "Open From Enterprise" option is disabled.
3) In Data Menu "Import From Enterprise" option is disabled.
To enable the "Any Map Add-on" option I have used this version.
Now can anyone tell me in which trial version, i got all these feature?
Or is there anything that i was missing to enable all options.
Thanks in Advance,
Rishit Kamdar

Rishit,
1) I want to connect this with Live Office. While In Manage Connection option i am not getting Live Office connectivity.
Anil - You need to have BusinessObjects Xcelsius Enterprise installed to work on Query as a Web Service (QaaWS) or LiveOffice...
2) In file Menu "Open From Enterprise" option is disabled.
3) In Data Menu "Import From Enterprise" option is disabled.
Anil - Install BO Enterprise server, and check if it is enabled...
-Anil

Option to Disable 4G on Q10 (and use 3G in lieu)

The new iphone 5 has an option to disable 4G and allow the phone to work in 3G mode. This disable button can be helpful for situations when the 4G service is weak.
I work in midtown Manhattan and the 4G/LTE service is weak in both my office and my commuting hub (Port Authority). Because the radio on the phone can find a whiff of 4G, it meakly attempts to use that to no avail. Emails get stuck in outbox, searching for webpages goes nowhere and the phone thinks there is no connection.
This is clearly a 4G issue. My old BB never had a problem with this. My friends who can disable their 4G do so for situations such as mine.
I spoke to the folks at BlackBerry and they said this was a "carrier decision" not to have a network connection listed as "3G only" in the Network Technology section of the Mobile Network. They told me other carriers did offer such an option.
When I spoke the tech support team at Verizon, they said a software update would need to be implemented to allow this "feature."
I understand that us BB users are akin to unicorns. However, those of us who use them like the new technology.
I strongly urge the Verizon customer support team to implement the software update that would allow Q10/Z10 users the ability to turn off the 4G. It would be the fair and right thing to do.
The favor of a Verizon response is requested.
Thank you.

Hi JonathanK-
Maybe you misread my post? In it I mentioned that I work in midtown Manhattan and commute through the Port Authority.
To be specific though, the office zip code is 10017 (a block from Grand Central Terminal, another large commuting hub). The zip code for the Port Authority Bus Terminal (PABT) is 10018 (625 8th Ave., NY, NY).
BlackBerry specifically told me that Verizon is the blockage to a switch on my Q10 that would allow me to turn off 4G. Is that inaccurate?
If so, I would like to schedule a conference call between your team and the BlackBerry team to get to the bottom of this.
Thank you, in advance, for your assistance with this matter.

Wake From Sleep Option Dimmed DBT-120 ver. C1

The bluetooth wake from sleep option is disabled for my Apple wireless keyboard and mouse. I'm using the Apple recommended dlink DBT-120 adapter, version C1. Bluetooth firmware updater 1.2 says my hardware is up to date, so it won't install. Updater 1.2.1 will not run on either of my Macs (G4 MDD or G5 DP), which are both running 10.4.8.
Any ideas on getting the wake from sleep option working with the DBT-120 version C1 adapter?
G5 2GHZ DP Mac OS X (10.4.8)

Good news - I now have full bluetooth functionality with keyboard & mouse, including wake from sleep, as well as certain start-up key combos. Here's how it did it, after reading numerous related Discussion posts:
- I gave up on the DBT-120 version C1 adapter, and got an older D-Link DBT-120 version B3 on eBay. The collective experience in the Discussions, and my own, show that the current Apple bluetooth firmware updaters (1.2 & 1.2.1) do not work with the newer DBT-120 version C1. Too bad this isn't clearly explained on Apple's download pages, or in the updater readme files.
- To help ensure a successful firmware update, I unplugged all other USB devices except the wired mouse & keyboard, booted Panther 10.3.6 from a firewire backup drive, ran no other applications, and prevented the Mac from sleeping.
- I used bluetooth firmware updater 1.2 (not 1.2.1) to update the firmware on the version B3 adapter. It does indeed take about 15 minutes to complete the firmware update, and goes through several write and wait cycles during the process.
- After the update was completed, I shut down, and totally removed power from the computer & all peripherals for a few minutes before restarting.
- Upon restarting, I had to delete the old C1 adapter based keyboard & mouse pairings from Bluetooth Preferences, and create new pairings using the upgraded B3 adapter. (I also marked the keyboard & mouse as Favorites.) I'm guessing this was necessary because some of the bluetooth pairing information must be stored in the bluetooth adapter - it's not all stored in OS X's preferences.
Aside from being able to wake from sleep, the Apple-upgraded DBT-120 (B3) enables smoother mouse operation and more reliable right-clicking.
Guess I'll have to find another use for my new DBT-120 version C1 adapter, unless Apple eventually comes out with an updated bluetooth firmware upgrade for it. Hello, Cupertino?

3D New shape from layer in CC

In CS5 I could create 3D shapes from the 3D menu under 'New Shape From Layer'. I can't find this option in CC, Where has it gone?

Brilliant, thank you. I should have explored further. (Y)

I recently bought a new iphone 5s from UAE , but unfortunately i did not find the facetime on my new iphone, how come that i bought a new iphone with missing options , please help

i recently bought a new iphone 5s from UAE , but unfortunately i did not find the facetime on my new iphone, how come that i bought a new iphone with missing options , please help

Your earlier phone must have been originally intended for sale in another country and must have been purchased from somewhere other than an authorized Apple retailer. Phones that are intended to be sold in the UAE have FaceTime permanently disabled. The option is not there and cannot be made to work.

Unable to see "New from Par" option while creating Custom portal layout

Hi All,
I am unable to see "New from Par" option in Content Administrator. I am trying to create a custom page Layout for which I am need create layout using new par file. I am not able to see this menu option. Does anyone know from where to enable this option?
Nitesh

There is no option like "new from par" from ep 7.
Create an iview based upon portal components.
check the below link for creation
http://help.sap.com/saphelp_nw04/helpdata/en/f5/eb50360e6a11d7b84900047582c9f7/frameset.htm
Koti Reddy

How do i disable iMessage from my mac, i have looked at other comments and there is no option to disable it when messages are open

how do i disable iMessage from my mac, i have looked at other comments and there is no option to disable it when messages are open

Solution may be found if you search in the "More Like This" section over in the right column.

While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps back.

While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps and music back. Do I need to set the phone up as new again?

Hi Vidbrent,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden

Could not complete the new 3D extrusion from selected layer command because the path is too complex.

I was trying to do a photo of mine like in this video but its not working help needed. thanks.
http://www.youtube.com/watch?v=egyLY78H7nE
When I tried the 3D I got an error message that said (could not complete the new 3D extrusion from selected layer command because the path is too complex.) what does this mean and how can i fix it?

There was a bug at one time where really simple paths (like a triangle, for example) could cause that error.
Is your path really simple (I don't plan to go watch the video)? If so, have you installed the latest update for Photoshop? That bug may have been fixed already.
If it's not that, it's possible that if your path is really complex and simply exceeding Photoshop's capability.
-Noel

I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
I would suggest trying a different firewire cable.
You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
Here is a link.
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
Other things to check:
Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

HT1212 I just bought a new ipod touch from a friend but she didn't reset it and everytime that I try to rest it, it keeps saying "Ipod is disable, connect to Itunes" but I'am connected to Itunes and it also says put in correct passcode?? how do I reset it

I just bought a new Ipod ios from a friend and she didn't reset it before she gave it to me and when I try to connect it to my laptop it keeps saying "Ipod is disable, connect to itunes"and it says to put in the correct passcode but I don't know what the passcode is and now I can't get ahold of my friend that sold it to me. So my question is: How do I reset the passcode and the Ipod touch so that I can sync it to my laptop and so that I can enjoy my new Ipod Touch?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Blackberry Desktop Software - Request Option to Disable Software from Loading During Start-Up

After Blackberry Desktop Software automatic updates. Software become part of Start-Up option or menu. I do not want Blackberry Desktop Software to automatically load during Start-Up. The Desktop Software does not have a user friendly option to disable the desktop software from loading during start-up. Am writing you to add this feature to your desktop software. I've just completed loading v5.0.1 and again I need to hunt and peck a way through windows to delete this software from loading during start-up. This software needs to have a user friendly option to disable the desktop software from loading during start-up. When I loaded v4.x.x when I bought my blackberry your set-up wizard had this disable option, but all your subsequent software upgrades change my windows start-up to load blackberry desktop manager software. Please add this feature to your software.

Hello and Welcome to the Forums!
In regards to your hope that RIM will see your message -- these forums are a user-to-user support channel, not a user-to-RIM conduit. As such, it is unlikely that they will see what you have written. However, if you have specific and constructive ideas for them, I have heard that they accept such via email to [email protected]
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I'm currently using 3gs. My 'Personal Hotspot' option suddenly dissapear from my 'Settings'. How can i get my 'Personal Hotspot' option back?

i'm currently using 3gs. My 'Personal Hotspot' option suddenly dissapear from my 'Settings'. How can i get my 'Personal Hotspot' option back?

The iOS5 upgrade for the iphone allowed network operators to control the availability of the 'personal hotspot' feature. If your operator is one of those who charge extra for tethering (and most do) then by upgrading to ios5 you've facilitated them to remove the option for you.
Apple bowed to the demands of the opertators on this one.
I am with Tesco(O2) and as soon as I upgraded to ios5 I lost the 'personal hotspot' option.
I have the last laugh though; They cant control my Android phone so I put the Tesco mobile sim into that when I want to use tethering.
Get an Android phone or if you're in the UK use Three mobile who allow tethering.

New 3D Postcard from Layer option suddenly disabled

Similar Messages

Maybe you are looking for