New 64GB playbook loading error

Hello,
I just bought this new 64GB playbook about 4 hours ago.. and I cannot get it to the Welcome page.
It is stuck on the loading screen.. please help!
I have tried rebooting it several times.

Thank you all for your help!
I forced update on it using desktop software, and I got past welcome page!

Similar Messages

Brand new E90 map loader error

When running the map loader first time it doesn't recognize neither the E90 in transfer mode or the memory directly connected to a usb port on my laptop. and map loader close up right away.
PC suite works fine and allows me to install any program in the phone memory or memory card.
Card is a 2GB which has more than 1.5 GB free.Message Edited by robmir on 28-Aug-200710:52 PM

Hi robmir
Have you run Maps application at least once with your memory card in E90 as this defines the folder structure that Maploader looks for to write data?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Getting Page Load Error while opening a Opportunity in new window

Hi All,
outbound SSO is enabled.
when i try to punch-in to my application from CRM through opportunity web link with Web Link Target as "open in custom tab" its working properly, but when i have Web Link Target as "open in new window" i am getting page load error. previously with out Outbounf SSO it is working properly.
Do i need enable any settings in CRM
thanks

when the web link target is "open in new window" or "open in current window" the request send to third party application from CRM ONDemand is HTTPS request as SSL is not enabled it is giving "page load error"(In the web link we are specifying http only) (User athentication type is "username & password/ SSO")
Is there any setting in CRM Ondemand to send Http request only instead of HTTPS?

Bought 64gb playbook from amazon and not sure if its new or refurbished.

Bought 64gb playbook from amazon for my daughter and not sure if its new or refurbished. Tablet has small fine scratches on the back, hair stuck in the casing, no screen protector, brown adaptor box has had label of some kind removed, adapter inside is loosely bound. Amazon supplier advises me to return but also that it isn't supplied with a screen protector or cover and adapter is new and packaged in a brown box. Not sure whether to accept a replacement or just get a refund. A bit concerned that this is a refurbished item being supplied as new.
Solved!
Go to Solution.

Definately sounds like it's not a new item, this isn't how they come packaged.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

I have an iPod nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod loading error message. The cable came with the car when I purchased it and the dealer was able to get it to work with his newer ipod. Please advise.

I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message. The cable works with the dealer's iPod which is a newer model. The cable came with the car when I purchased it. Please advise. Thanks.

Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'. How do I fix it (my husband's 2 devices work fine on the PC)

I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'. How do I fix it (my husband's 2 devices work fine on the PC). It's driving me mental and has stopped me putting anything new on for months. Help!!!

http://support.apple.com/kb/TS2690

New version wont load..Message Error 7 - Windows error 126

new version wont load..Message Error 7 - Windows error 126

Any update on this???? Still having the same problem.

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. pleas

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. please re install of repair the application and try again. I have done this and it's still not working

anomaly jade,
You only need to use the serial number during installation.
Have you, at least seemingly, been able to install, and then you are unable to start up?
If that is the case, you could try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Just trying out my new mac but email won't load, error says "The mail server denied access to the account because an administrator or other mail client was using it when Mail tried to log in. Try again later." A little lock is beside the email inbox

Just trying out my new mac but email won't load, error says "The mail server denied access to the account because an administrator or other mail client was using it when Mail tried to log in. Try again later." A little lock is beside the email inbox account, no password prompted and account is online and enabled... Thoughts?

Have you tried clicking on the lock to see it it will then ask for a passwored. Otherwise, try reblooting.

Keep receiving down load error try again later, when I try to download some previous music purchases for my new iphone

Keep receiving down load error try again later, when I try to download some previous music purchases for my new iphone

Hello JaseW,
The following article provides a number of steps which can help get your downloads moving again.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

Load error code 9: VI version (8.2) is newer than the LabVIEW version (8.2b23).

I am getting the error...
VI version is later than the current LabVIEW version. An error occurred loading VI 'CleanupCallback.vi'. LabVIEW load error code 9: VI version (8.2) is newer than the LabVIEW version (8.2b23).

This is true. the 'b' indicates that it is a beta version of labview 8 (.2 in this case). I am surprised your beta version is still working. You need to upgrade to 8.2 or have the vi downgraded to 8.0
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Stor.e TV+ No Loader error keeps coming up when switching on

I have been experiencing continual problems accessing the hard drive. "No Loader" error message keeps coming up when switching on.
The so-called "solution" to this problem posted on this forum is to open up the box and fiddle with the cables. Whilst I have had some success with this method initially, dismantling the box 10 times a week is not on.
I tried something else in desperation.
When the No Loader message comes up, I switch the box off and on again from the remote.
After 2 or 3 times or so the HDD folder usually appears.
I have been doing this consistently now with great success. This however suggests that the No Loader error message is NOT a mechanical connector problem with the hard drive but (as usual) poor software (what else?).
Dismantling the unit is tantamount to switching it off for an extended period of time so may explain why this technique works.
Switching the unit on and off several times also solves the problem of the D folder not appearing on the network even though Win7 shows Store-TV-Plus as a mapped NTFS drive (but can't find the D folder).
See the similarity?
Another thing that exacerbates problems is the unit's poor ventilation. The first thing that happens with this unit is that the rubbish stick-on rubber feet fall off.
Whilst this may seem innocuous, the ventilation slots are underneath the unit and will be blocked if there are no feet. I live in a hot country so this device gets pretty hot and behaves even more erratically unless well ventilated.
Ideally keep it well away from other units and preferably sit it on a small box by itself with the vents underneath well exposed.
I also still experience problems playing FLAC and MKV files. The unit occasionally loses synch with FLAC files which generally otherwise play OK and locks up or causes loud bangs or white noise on the speakers (dangerous).
Some MKV files just don't play at all even though VLC plays them. There are a myriad other inconsistencies but these are the most annoying.
Is anyone else experiencing these problems or does anyone have any other solutions to prevent these problems?
I don't suppose we can expect another software upgrade from Toshiba? In your dreams, pal.

OK, so I took the risk and updated the firmware of my Stor.e TV+ to the Noontec V8S latest firmware V3.0816.13_V8S from noontec website.
The update went fine without a hitch (took about 2 minutes from an old 256MB flash drive plugged into the back USB port of the unit, which I formatted before using), and some of the irritating shortcomings of the Toshiba firmware was solved. Samba worked in some fashion, but I was still not able to download songs directly to the Stor.e over wireless, which is the only other feature I currently need. The irritating remote control buttons were changed to the way any sane person would use them (I had changed my universal remote control to correct this, so would have to change the settings if I kept the updated firmware) The new firmware seems solid, but I DON'T USE THE VIDEO CAPABLITIES, so I can't comment on this.
One major drawback of this update for me is that the small display on the unit becomes much less readable. Seems like there is a problem with the font on the new firmware. I use my Stor.e exclusively as a flac music player, and since I don't have it connected to a tv the small display is crucial for me to select tracks or disks. I have 300+ discs, so the Stor.e is an excellent cheap media player which I connect to my HIFI system via a DAC.
I thus had to change back to the Toshiba firmware to correct this problem. Seems like I would still have to use USB to download music to the Stor.e when I buy new CDs. What a pity.
Incidentally, the new Toshiba firmware is very much like the old firmware, in that it lacks the capability to switch on Samba. In the readme Toshiba states that the new firmware fixes a network problem, but I think that this is probably the smallest issue most users have with the Toshiba firmware.
So, my advice to anyone having video, control or other issues with the Toshiba firmware is to flash to the Noontec firmware to see if it resolves their issues. If it doesn't one can always revert to the official Toshiba firmware as I did.
You do this at your own risk though, if you brick your unit don't blame me...

How to resolve "Internal error: ABAP Report cannot be loaded" error

Hi All,
I am new to SAP.Please help me out from this problem.
When I am trying to debug BSP page, in debugging mode it shows "Internal error: ABAP Report cannot be loaded" error and then dumps.
In transaction ST22 it shows this dump something like this
Runtime Errors         MESSAGE_TYPE_X
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
    1 FUNCTION AC_SYSTEM_FLUSH .
    2 *"----
    3 ""Lokale Schnittstelle:
    4 *" IMPORTING
    5 *"     VALUE(CALLED_BY_SYSTEM) TYPE C OPTIONAL
    6 *" EXCEPTIONS
    7 *"      CNTL_SYSTEM_ERROR
    8 *"      CNTL_ERROR
    9 *"----
   10   data: sysubrc like sy-subrc.
   11
   12   CALL FUNCTION 'AC_FLUSH_CALL'
   13        EXPORTING
   14             SYSTEM_FLUSH = 'X'
   15             CALLED_BY_SYSTEM = CALLED_BY_SYSTEM
   16        IMPORTING
   17             MESSAGE_NR   = sysubrc
   18             MESSAGE_TEXT = SY-MSGLI.
   19
   20   sy-subrc = sysubrc.
   21
   22   CASE SY-SUBRC.
   23     WHEN 0.
   24     WHEN 1.
   25 *     system_error
   26       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
   27     WHEN 2.
   28 *     method_call_error
>>>>>       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   30     WHEN 3.
   31 *     property_set_error
   32       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   33     WHEN 4.
   34 *     property_get_error
   35       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   36     WHEN OTHERS.
   37       RAISE CNTL_ERROR.
   38   ENDCASE.
   39
   40 ENDFUNCTION.
Thanks in advance
Sunil Choudhury

Hi Sunil,
The reason for this could be anything, anyways look up for an OSS note with the error message first.
As a workaround, you can try to use the classic debugger instead of the new ABAP debugger and see if it works.
You should be logged into SAP via SAP GUI when you are debugging BSP.
Regards
Chen

Crystal Reports 2008 - Report Load error - Memory Leak Error?

Hello
 
We have a problem with Crystal Reports 2008 with .NET 2.0.
 
CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304
 
The problem is that during high amount of report producing, errors in eventlog pops up and the production of reports using 
Crystal Reports stops.
 
Below are examples of the three most common event logs.
 
We have tried to implement a cleanup method both as a destructor (with a global ReportDocument rdoc variable) and using direct call to cleanUpDoc() method when finished with loading doc:
 
~IOServerClass()
 
 
 cleanupDoc();
 
 
 
 private void cleanupDoc()
 
 
 try
 
 
 if (rdoc != null)
 
 
 rdoc.Close();
 
 rdoc.Dispose();
 
 rdoc = null;
 
 
 this.CleanGlobalEvents();
 
 System.GC.Collect();
 
 
 
 
The doc is loading using the "normal" method (in-process).
 
 
try
 
 
 rdoc = new ReportDocument();
 
 rdoc.Load(fullpathandreport);
 
 
 catch (Exception ex)
 
 
 cleanupDoc();
 
 
...process doc....
 
cleanupDoc();
 
 
Furthermore we have tried during Scalable tests of the system - but cannot produce the below errors ourselves. Only the customer can.
 
Please help with solving this problem.
Is the above advisable to do?
Should the document be loaded in another way?
Is it a memory leak?
 
Regards
Kristian
 
 
event logs:
 
 
#1
 
 
Event Type: Error
Event Category: None
Event ID: 1102
Date: 12-02-2010
Time: 10:22:05
User: N/A
Description:
IO_ServerClass.IO_ServerPrepareReportBeforeExecute() Report load Error:
Loading reportfile=C:\Inetpub\wwwroot\xxx\Reports\321.rpt
Source=CrystalDecisions.CrystalReports.Engine
Message=Load report failed.
Stacktrace= at
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
 at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename,
OpenReportMethod openMethod, Int16 parentJob)
 at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
 at xxx.IOServer2.IOServerClass.IO_ServerPrepareReportBeforeExecute(String
WebRootRelPathNameRepName, String init, Hashtable ParmsVals, Int32 JobId, Int32 JobStep,
Page webpage) in C:\Documents and Settings\xxx\My Documents\Visual Studio 2008\Projects\xxx.IOServer2\IOServerClassClassic.cs:line 290
InnerSource:Analysis Server
InnerMes:
Error in File 321 {19463E3B-D404-45EB-88AE-5722A7FF9E90}.rpt:
The request could not be submitted for background processing.
InnerStack:
 at
CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object&
DocumentPath, Int32 Options)
 at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object&
DocumentPath, Int32 Options)
 at
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
 
 
#2
 
 
IO_ServerClass.IO_ServerPrepareReportBeforeExecute() Report load Error:
Loading reportfile=C:\Inetpub\wwwroot\xxx\Reports\321.rpt
Source=CrystalDecisions.CrystalReports.Engine
Message=Creating an instance of the COM
component with CLSID {D7F5D7C3-B06C-4CAC-BC47-A06E66D2EE9B} from the IClassFactory failed
due to the following error: 8007000e.
Stacktrace= at
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.CreateRptDoc()
 at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper..ctor()
 at CrystalDecisions.CrystalReports.Engine.ReportDocument.Initialize()
 at CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor()
 at Kimik.IOServer2.IOServerClass.IO_ServerPrepareReportBeforeExecute(String
WebRootRelPathNameRepName, String init, Hashtable ParmsVals, Int32 JobId, Int32 JobStep, Page webpage) in C:\Documents and Settings\xxx\My Documents\Visual Studio 2008\Projects\xxx.IOServer2\IOServerClassClassic.cs:line 289
 
#3
 
 
IO_ServerClass.IO_ServerPrepareReportBeforeExecute() Report load Error:
Loading reportfile=C:\Inetpub\wwwroot\xxx\reports\340.rpt
Source=CrystalDecisions.CrystalReports.Engine
Message=Load report failed.
Stacktrace= at
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
 at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename,
OpenReportMethod openMethod, Int16 parentJob)
 at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
 at Kimik.IOServer2.IOServerClass.IO_ServerPrepareReportBeforeExecute(String
WebRootRelPathNameRepName, String init, Hashtable ParmsVals, Int32 JobId, Int32 JobStep,
Page webpage) in C:\Documents and Settings\xxx\My Documents\Visual Studio 2008
\Projects\xxx.IOServer2\IOServerClassClassic.cs:line 290
InnerSource:CrystalDecisions.ReportAppServer.ClientDoc
InnerMes:
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
InnerStack:
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object&
DocumentPath, Int32 Options)
 at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object&
DocumentPath, Int32 Options)
 at
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
Edited by: kristians on Feb 16, 2010 2:57 PM

Hi;
First, ensure you have the latest service pack / hot fix for your version of Crystal Reports, and that the client has the same updates as well. Fix Pack 2.4 is the current latest, and can be downloaded from our downloads section.
One of the errors is the Background Processing error, so have a look at the following article:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33&overridelayout=true
Regards,
Jonathan
Follow us on Twitter u2013 http://twitter.com/SAPCRNetSup

How do I get iPhoto on new iPad to load all Facebook albums to select where to upload?

How do I get iPhoto on new iPad to load all Facebook albums to select where to upload?
Besides 'new album' , 'wall photos', or 'iPhoto Uploads' ... it only shows 24 pre-existing albums to choose. I need to see the other 50, 60, etc albums I have.
I've also noticed that iPhoto fails to load to certain albums with some 'Domin Exception' error of some kind (not sure the exact message).

You need to make the new Mac iTunes library your syncing library. iTunes on the Mac sees your iPad as a new device because you have never synced with this computer before. You can make the Mac your syncing computer by following the instructions in this user tip. You will be able to transfer the purchased music on the iPad into iTunes when you follow this procedure.
Syncing to a new computer.
https://discussions.apple.com/docs/DOC-3141

New 64GB playbook loading error

Similar Messages

Maybe you are looking for