New 6534 pattern generator causes computer not to boot

We have a brand new 6534 pxi pattern generator. When we plug the card in the computer does not boot at all. As in nothing appears on the screen and only the fans in the chassis turn on. We have a PXI 1010 chassis with 2 other cards inside. I also tried it on another computer with an external pxi bus and the same thing happpened. Is the card blown or are we missing something?

Sounds blown!
Call NI and talk to tech support to get an RMA.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

  • Power outage caused laptop not to boot anymore

    I had my hp Pavillion dv9000 connected directly to the wall without the battery inside and was watching a movie. The power outlet suddenly died and consecquently my laptop turned off. Now when I try to turn it on, the fan runs but nothing shows up on the screen; not even the hp logo or BIOS. I noticed that the hard drive access LED never lit up so I assume it wasn't just the screen that broke but something is causing the whole computer not to boot up at all. Most likely something got fried but I'm not sure what. It's a shame because I really liked that laptop and would like to repair it if possible. Does anyone have any suggestion?

    Hello NTHQ,
    Sorry to hear you are having trouble with your HP notebook powering on.
    I have looked for information on your system and I do have a suggestion for you that might be helpful.
    You should check and see if you are getting a blink code from the caps lock and num lock keys.
    Here is a link explaining the blink codes.
    Can you provide your full model and product number?  Here is a link showing how to find that information.
    Let me know what happens.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Sleep light of new model coming on when computer not asleep

    I just got my new PB yesterday and one thing I noticed very quickly is that as soon as the screen shuts off the sleep light comes on. To be clear the computer is NOT asleep - in fact I turned off the "put hard disks to sleep" option just to confirm.
    This didn't happen with my old ibook and doesn't happen with my boyfriend last rev 17" powerbook.
    Any ideas?

    Alright so I just found this, which partially explains it:
    http://docs.info.apple.com/article.html?artnum=302586
    About the PowerBook G4 sleep indicator light status
    Starting with the PowerBook G4 Double-Layer SD models, the sleep indicator light in the lid button has a new behavior during startup.
    When you first press the power button to turn on the PowerBook G4, the sleep indicator will also turn on. As the computer starts up, the indicator stays on until the display turns on. You can use this light as a diagnostic visual to determine whether the computer is getting power at startup.

  • New version of itunes and computer not recognizing ipod nano

    I intalled Itunes - version 11 on my laptop.  The computer and Itunes does not recognize my Ipod Nano. However it works perfectly find on another computer with Itunes Version 10.  Help -- can't sync songs on my Ipod with Itunes.

    Hi Glenfromtn,
    If you are having issues with your iPod Shuffle not being recognized by iTunes on your Windows machine, you may find the following article helpful:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards.
    - Brenden

  • New monitor sleeps and causes computer shutdown

    My system was working fine until I purchased and installed a new HP Pavilion 23bw monitor. We've got the monitor set for maximum resolution (1920 x 1080), which should be well within the capability for the dual ATI Radeon HD 5670 graphic cards we have installed.
    The monitor has been going to sleep at strange times while the computer is up and running, often in the middle of a browsing session. The monitor loses a signal and cannot find one, cycling through them all and coming up empty even though it was JUST talking to the computer.  I haven't noticed any common thread as to when it loses the connection... it can be anytime while I'm doing anything.
    Probably a related issue... I've got an old game called Stalker that I was using to test the monitor, and if I run it long enough (in any resolution), the computer shuts down.  The monitor goes dark and then the computer powers down. Usually on reboot, the monitor initially works but "sleeps" and loses connection before the windows login screen is reached... a second reboot is necessary to bring the system back up properly.
    Let me be clear, this is behavior that wasn't happening two days ago with our old monitor... the odds are that something with the monitor is the issue, as that's the only piece of hardware that changed.  To clarify: the computer shuts down while playing a 1st person shooter game, and the monitor "goes to sleep" and loses signal during more normal operations.
    I originally attached the monitor using the VGA cable, but I have switched that to the DVI cable and am seeing the same behavior.
    I'm running Windows 7 SP1, and the driver information is as follows:  Driver date: 3/20/2013, Version 3.0.0.0 (monitor.sys version 6.1.7600.16385).  
    I would appreciate any help, as this is incredbily frustrating.  Thanks in advance...

    Hello,
    What computer model do you have?
    If you use your old monitor now, does this problems go away?
    Can you try to make a monitor reset on the menu of the monitor? Its called factory reset.
    Have  you installed HP Driver for the monitor and HP My Display that comes on the CD?
    If you havent install the driver, try to do it and if you have installed HP My Dispplay, do remove it.
    Let me know.
    THanks,
    I work for HP! Please remember to provide and if this helped click ON

  • Uninstall norton causes computer not to start up

    I have just bought a toshiba all in one PX30T-01Q today and trend security software. When I tried to install trend it says that norton is incompatible with trend. It asked if I wanted it uninstalled. I clicked yes so it went about uninstalling it. But then my screen freezes. I had to turn it off. Now I cant even start up my computer. HELP!!

    This is the site for U.S. Models only and yours appears to be an Australian model.  Your support including Tech Support phone numbers can be found HERE.  The first thing I would do would be take it back where I bought it.  If that is a problem, then call Tech Support.
    One thing you might try before doing all this is to turn the machine on and if it freezes as before, hold down the power switch for 10 seconds or until all lights are out and the fan stops.  Then turn it on again.  Good Luck!
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Inserting DMA causes Petalinux not to boot

    Hello,
    I'm experiencing a problem whenever I try to insert an AXI DMA IP into a Vivado Project: the resulting hdf, when applied to a petalinux project, inhibits the kernel from booting. All I see is a message ("Linux Kernel Starting...") and the system hangs.
    I've noticed that commenting, in the pl.dtsi geneated devicetree file, the following lines which relate to the Axi DMA, the kernel boots without any issue.
    axi_dma_0: dma@40400000 {
    compatible = "xlnx,axi-dma";
    reg = <0x40400000 0x10000>;
    dma-channel@40400000 {
    compatible = "xlnx,axi-dma-mm2s-channel";
    xlnx,datawidth = <0x20>;
    xlnx,device-id = <0x0>; };
    dma-channel@40400030 {
    compatible = "xlnx,axi-dma-s2mm-channel";
    xlnx,datawidth = <0x20>;
    xlnx,device-id = <0x0>;
    Anyone has overcome this issue?

    Yes, I loaded the PL correctly: I inserted a flickering LED connected to the clock to check that the Programmable Logic bitstream was correctly loaded. I think the problem must be somewhere else. PS: even trying to boot the QEMU emulator leads to the boot sequence hanging, and as soon as the DMA is removed from my PL it boots properly. I've also tried with a VDMA and it also boots without any issue.
    Giorgio

  • Can the hard disk named "\" cause it not to load?

    Hello Everyone,
    Machine will not load (G4 12" running 10.4. After it starts, the apple icon appears then the spinning progress wheel, and that is it. It will not finish loading.
    I used Disk Warrior, and drive genius and nothing worked. I booted the computer from the boot up disk utility disk. When the program was running I noticed the hard disk was named "\" which is the back slash symbol. I was wonder if having the hard disk named this could cause the computer not to boot up and if yes, then how do I change the name?
    Thank you.
    Marco

    You may be able to rename it by booting it in Target mode:
    http://docs.info.apple.com/article.html?artnum=58583
    Or booting another Mac and connecting it to that Mac using a hard drive case that supports that drive.

  • I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?

    I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?

    Right clicking on your ipod in the device list an d choosing "transfer purchases" will copy apps and bought media from iTunes to your computer. Due to the new iTunes library on your new HD, iTunes will erase your ipod during the first sync. To save your data to the computer take a look at this article about saving data from your device to a computer: http://support.apple.com/kb/HT4137
    Basically it's backing up manually, transferring her purchases (apps and bought music), letting iTunes erase the ipod due to the new iTunes library, and restoring from the manual backup again, to get all the data and settings back.
    Make sure your new computer account is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
    This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
    Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
    Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
    The rest of the data can be restored from the backup you made.
    Restoring: http://support.apple.com/kb/HT1414
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • HT4061 I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

    I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    I am in the same boat. I tried repeatedly to contact iTunes support, but was told each time that I had contacted the wrong deaprtment and they could not help me. There must be a way to still be able to use the iTunes store without paying for a system update. If not, I hope they will reimburse me the money I have in my acount.

  • How to transfer/sync my iphone 4 music to my new computer - not connected phone to computer at all yet

    How to transfer/sync my iPhone 4 music/photos etc  to my new computer - not connected phone to computer at all yet.
    Computer has Windows 8

    SEARCH!
    http://lmgtfy.com/?q=migrate+iphone+to+new+computer

  • TS1382 I have a ipod classic 160GB and it's not showing any music anymore, but there is still 7GB of memory being used, and I don't have it back up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that

    I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?

    What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
    The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
    Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
    If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
    if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
    If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often.

  • I have 4 devices on an iTunes whose computer hard drive is dead. How do I get my devices on a new iTunes on a different computer and not wipe out my contents?

    I have 4 devices (iPhone 3GS, iPhone 4s, iPad2, Mini iPad) on an iTunes whose computer hard drive is dead. How do I get my devices on a new iTunes on a different computer and not wipe out my contents?

    This should be of great help to you.
    https://discussions.apple.com/docs/DOC-3991
    Or this one.
    https://discussions.apple.com/docs/DOC-3141

  • New Adobe Photoshop elements 11-can not share pictures. I do use AOL email. Get error of "Elements 11 Organ. has stopped working,  I have looked into sharing tab and my only option is Adobe email settings.  I do have outlook set up to work on computer run

    New Adobe Photoshop elements 11-can not share pictures. I do use AOL email. Get error of "Elements 11 Organ. has stopped working,  I have looked into sharing tab and my only option is Adobe email settings.  I do have outlook set up to work on computer running windows 8.1  Please help, Mainly use to share pictures.  Thanks!

    One thing puzzles me:
    RedClayFarmer wrote:
    I then found one suggestion that the problem might involve permissions. The suggestion was to right click PhotoshopElementsOrganizer.exe in its installation folder (which on my computer is at at D:\Photo\Elements 11 Organizer) and run Organizer as an administrator. This also failed.
    I don't understand why running the exe from the installation folder would have worked.
    I would have simply tried to run that exe from its real location :
    Sorry, I can't help you more about permissions...

Maybe you are looking for