New 80GB Video Problems-TV Shows

My wife got me an 80GB Video Ipod for Christmas. I bought the entire season of the Office from Itunes. After I watch a specific episode, it seems to not be on the TV Show menu on my Ipod anymore. If I sync up to Itunes, it doesn't get replaced on my Ipod.
Any idea why my shows are disappearing?
Thanks
Dell E1705 Windows XP

Make sure the episodes you wish to sync have checkmarks.
Also make sure your iPod (click in iTunes) says sync only checked.

Similar Messages

New 80GB Video Ipod having all sorts of problems!!!

I just got the 80GB for christmas and I have had nothing but problems. I actually haven't gotten it to play continuously without freezing:
-It freezes often and I have to let the battery completely die and recharge it in order for it to respond.
-I fully charge the battery and then when I turn it on it says that the battery is really low.
-Sometimes my computer recognizes it and sometimes it doesn't?
Last night i charged it for over four hours. When I went to turn it on today, it turned on and then immediately froze on the main menu. I managed to reset it but the battery is at only 50% after fully charging it last night and not using it?
Did I get a lemon or is everyone else having these problems? Having a brand new ipod freeze on an 8 hour plane flight is a real drag.
Thanks,
Dezmond
G4 Powerbook Mac OS X (10.4.4)
G4 Powerbook Mac OS X (10.4.4)

As far as freezing up....have you tried restoring your iPod to resolve this issue? Where is your music from.....CD? iTunes Music Store?
Do note that if your computer is set to go to to sleep then it will not pass a charge to your iPod. Although you think it is charging all night long, really it's not. So check System Preferences > Energy Saver for your sleep settings and turn sleep off.
A good tip about charging. When you are done charging and disconnect the iPod from the power source you should reset it..Hold the Menu+Select button for about 5-10 seconds and it will restart. Upon restart the iPod goes thru certain checks with one of those being to update the battery icon. Sometimes you just aren't really seeing the proper battery status. So just reset it next time and see what it shows then.

Apple aware of video problem in the new Intel iMacs

Macworld Daily News
Thursday - February 09, 2006
Apple investigates Intel iMac Front Row problems
By Macworld staff
Apple has confirmed it is aware of, and investigating, reports of video problems in the new Intel iMacs.
Recent reports claimed that some users had experienced random horizontal lines and other video playback problems when playing video in Front Row.
"Apple is aware of this issue and is looking into it," the company said in an email to a web-based pressure group that has been gathering information on the problem. "If a customer has any technical issues, they should contact AppleCare."
The problem is allegedly software-based.

"Sure, I'd be more understanding had it been an issue that required a very special set of conditions to trigger"
Apparently it does as this issue is not affecting all users.
"As I was told, affected owners would not be proactively notified"
Where you you prefer them to use their limited resources, trying to figure out who MAY be affected and sending them some sort of detailed action plan, or spending the resources determining the cause of the issue and developing a solution that can be distributed to the ones who need it not only now, but those that may discover the issue next week?
I can understand that you are frustrated, and don't blame you for feeling that way, but this is an all new piece of technology and bugs are going to come up that were missed in testing. No company can afford to test at a 100% level. To do so would drive the costs so high as to make it impossible to sell the product, especially to the market the iMac is aimed at. Apple has a pretty darned good track record of resolving issues quickly when they appear. Until they do you only have a few choices. Use the workaround until the solution appears, waste time complaining about it, or sell the iMac and purchase a different product. That's really about all you can do!
It was good of you to spend your valuable time, and yes it is valuable, trying to help the engineers or service reps solve the issue. That they spent that much time with you should show their commitment to solving this issue.
Be patient, give them a chance, they have not had long to try and figure this out.

New video clips only show bottom half of frame

Video clips shot with my new video camera only show the bottom half of the frame in Premiere Elements 3.0. Older video clips show up just fine.

goshawk28776
You say that this 1/2 video display is related to video from your new camera and Premiere Elements 3.
The problem of the 1/2 video display has been associated specifically with .wmv format and a recent Windows Update kb file.
But, I would ask, just whar brand/model camera do you have that is shooting .wmv video?
By the way, what computer operating system are you running Premiere Elements 3 on....Windows 7 32 or 64 bit or Windows XP 32 bit?
The Announcement that we have post at the top of this forum is as follows:
Announcement: Windows Update Causes Half of Display to Be Blacked Out
Hide Details
MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
"MS bulliten MS13-057. Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
For us, it occurs when decoding WMV9 files. Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
You can uninstall these windows updates to resolve your problem."
There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
This notice suggests deleting Windows Update kb 2834904 for Windows XP, and Windows Update kb 2803821 for Windows 7. So, please let us know your situation and whether any of this applies to you and whether your problem was solved by taking one of these actions.
Thank you.
ATR

Brand new Ipod Classic 80Gb - Synching Problems - Ipod ejecting itself

Bought a new 80Gb Ipod last week after my old one crapped out. Computer also crapped out so had to load all my CD's to another laptop on newly downloaded Itunes 7.5. Hooked the new ipod up to the laptop and immediately had problems with the Ipod 'ejecting' itself before any songs were loaded. Furthest I managed to get was name the darn thing before it ejected. So, tried the 5R's with no success - still kept on 'ejecting' - sometimes straight away, sometimes part of the way through synching the library always with the end result of no songs on the ipod. Tried updating windows, updating Itunes, restarting computer, using different cables, different USB ports (all 2.0) with no success. Took the Ipod to the Apple Genius Bar where they restored it and managed to successfully synch a few tracks. Thinking the problem was solved - took it home and it is doing exactly the same thing again. AAAARRRRGGGHHH. Trawled the forum boards all day yesterday found a few suggestions I hadn't tried - setting it to enable disk use etc etc. When I hooked the ipod up last night it was ejecting immediately after connecting so not even giving me a chance to try the new fixes. Plugged it in this morning for a last ditch attempt and it connected long enough for me to switch on the manual synching and I successfully loaded 32 songs out of 4000 (yippee!!) before it started the same carry on again - disconnecting itself..
This is so frustrating - what has happened to the ipod??? I had no trouble at all with my old one. A new piece of kit such as this should not be so time consuming and stressful. After this experience there is no way I will buy another ipod.
Has anyone got any suggestions?

I had over two weeks of frustration getting the right collection of fixes installed (iTunes 7.5 and 1.0.2 on the iPod; 1.0.3 should be OK). My symptom was that iTunes starts to go spacey on me when I plug the iPod classic into the USb port. There are long delays that I can't find a good cause for.
Start up iTunes on your PC.
Before you connect the iPod to your PC, try putting the iPod into Disk Mode (don't know the article info but there is one on this site; just search for "Disk Mode". There will be a check mark on the iPod screen when you have successfully arrived there.) Then plug it into the USB port on your PC.
It may take several seconds/minutes for the iPod to be recognized in iTunes (I get some help with this by clicking on the Windows Start button, which overlays part of the iTunes screen, and waiting for iTunes to refresh its screen.)
Before you click the Sync button, be sure you have chosen all the tabs you want to sync; since my music library is over 40GB, I choose this one first and let iTunes copy over my whole music library. I also check the Enable Disk Use box on the Summary screen. I then go out for coffee or to the bathroom (it takes a while).
Once everything is copied over, be sure to press the Eject button in iTunes to be sure it is releasing the iPod.(Try my Windows Start button trick above to get positive feedback when it is safe to disconnect.) When it disappears from the list on the left-hand side and the screen is refreshed, it is safe to disconnect the iPod. (I'm not sure this is absolutely necessary, but it works for me.)
It can be a little dicey to get the iPod out of Disk Mode or even to just turn off the iPod, but keep trying and you should be able to get it back into normal mode with all your music, video, podcasts and photos (haven't tried Contacts or Games) playable.
Getting
When all the information has been copied over,

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

I just downloaded the new Firefox 4, rebooted, and viewed you videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

I just downloaded the new Firefox 4, rebooted, and viewed your videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

The Firefox icon is the default feature for Windows Vista and 7 only, it does not apply to Windows XP users.
To have the Firefox icon instead of the Menu Bar:
View > Toolbars and UNCHECK the Menu Bar.
After that, click on the Firefox icon and you'll have the Menu Bar appear again.
http://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing

Cant sync iTunes Videos to my NEW 80gb Classic!

Just hooked up my new 80gb classic to iTunes for the first time and all my music loads just fine. However, I bought a handful of music vids and a couple episodes of Entourage from iTunes and they refuse to sync. Itunes gives me the "not the correct format" error. Did I just throw away $20? What can I do to resolve this?

I'm sorry, the error is actually something to the effect of "your iPod does not play videos"

My iMac keeps showing an install bar every time I reboot or restart since upgrading to OS X Yosemite. This never occurred in any of the previous OS. Is this new or a problem?

My iMac keeps showing an install bar every time I reboot or restart since upgrading to OS X Yosemite. This never occurred in any of the previous OS. Is this new or a problem? I have an iMac (27-inch Mid 2010), Mac OS X (10.6.7).

they moved to a progress bag instead of the spinning gear or beach ball

The new version of iTunes does not recognize my Ipod-prior to this version, had no problem, Ipod showed up as list under the Imac library. Now getting synch must erase setting! Help

The new version of iTunes does not recognize my Ipod-prior to this version, had no problem, Ipod showed up as list under the Imac library. Now getting synch must erase setting! Help

well nobody bothered to give me a hint on what to do, maybe because the problems with the new version of iTunes are really a lot, there is an enormous amount of people out there that have all sort of different problems including mine so I have decided to return to the previous version which works fine and wait untill the apple people come up with a decent product ....

I tried to restore my new ipad in my itunes but it keeping restore it to my old ipad. I did delete also all my backups in the iTunes, still the same problem is showing??? please I need a huge help to have my new iPad as I bought it???

i tried to restore my new ipad in my itunes but it keeping restore it to my old ipad. I did delete also all my backups in the iTunes, still the same problem is showing??? please I need a huge help to have my new iPad as I bought it???

pleeeeeeeeeeeeeeeeeeeeeeese I need an URGENT help,,, someone answer me back

Error message when connecting 80GB Video iPod

I'm getting this error message when trying to connect my 80GB Video iPod:
"The iPod (name) cannot be synced. An unknown error occurred (-48)."
Never seen this one before.
I haven't synced this iPod for a few weeks but it always behaved fine before, taking a few seconds to appear in iTunes (v7.5) then syncing perfectly when I hit the Sync button (I have it set to manually sync only because sometimes I want to change the contents or only sync music).
Before syncing on this occasion, I did an iPod software update via iTunes - iTunes said there was a newer version (1.2.3). After the update, I disconnected the iPod for a few minutes (somehting I wanted to check content before syncing), then reconnected it. At first iPod took about a minute to show up in iTunes - way too long. I Reset the iPod and tried again but still LONG delay to appear in iTunes (again about 1 minute). I did another Reset - same result. Then I did a complete Restore, after which syncing to restore the contents gave problems - it refused to finish the sync. I had to disconnect and start again, syncing the data one section per sync session - Contacts, music, videos, iCal - which seemed to work fine. Then I disconnected, waited a few minutes then reconnected the iPod to check. It wouldn't connect at all. Did a Reset, tried o connect again and it did connect but then proceeded to resync all my contacts taking almost 30 minutes (way too long) to do so (I had made NO changes in Address Book since that data was put in there). I tried to reconnect again but then got the error message (above). Did another total Restore and the same shenannigans happened. Now, I have an iPod with data on it and works fine, but iTunes won't recognise it - just gives this error message every time.
By the way, my 8GB Nano (software 1.1.3) seems to sync fine on the same system, same computer.
Could this be the 1.2.3 iPod software giving issues? I appreciate any help because I also use this iPod for recording for my work, which getting a little urgent now.
Many thanks.

Thanks Zevoneer, but no real success. I did all that but when I tried to sync after it, it got partially through the sync (about 10% I'd guess) and presented an error message saying that the disk couldn't be read form or written to (sorry but I forgot the error number). I disconnected the iPod, waited a few minutes then reconnected and again got the message but then the ipod continued to finish the sync, even though almost all of the music and 2 of my 4 videos didn't go over to the iPod. I'm now thinking that this just isn't satisfactory reliability from the device since I use it a lot in my work and rely on it. But this new iPod is only a few months old, had very little use and only made about 12 recordings - In comparison, I've used the Nano heaps but now want to move over to the bigger one, basically for more capacity and bigger screen for video. I wonder if it's a hard drive failure in this iPod?
null

There's video problems with my Zen Vision:M already (M video cable related) Please help

Some background...
System:Windows XP with Service Pack 2.
Player: Brand new Creative Zen Vision: M with no firmware updates.
My Zen Vision:M has a problem (besides the scratch and fingerprint attracting top surface): It won't play videos on a TV screen when the M Video Cable (also from Creative) is linked to it anymore. It's only been a few hours...
I had the cable already, and got the player today. I let the player charge to /4th of a battery while I was setting up all the software. I ran the software programs just to take a peek, only changing the name of my player (to my name). I used Winamp 5.3 to put a music track on the player to test it. After that, I hooked it up to the VCR in my room through the white and yellow A/V plugs in front. It worked just fine. It to the tv a little large, but I was okay with it.
Later on today, the new AC charger I ordered came in the mail (Player came through UPS, charger through USPS). I looked at my old charger (Creative Zen Touch) and realized it would work with the plug-in part of the sync unit at the bottom. I tested it for a minute and it did. I still took it out and tried the new one. This is where, I think, something happened. I had to press the sides to get the thing in, and it was hard to come out. Everything still fit just right, and nothing seemed to be wrong. I used my old charger as I added more of my music library. Now it was on to videos. I had to convert the first two test vids (they were .wmv), but they played on my player fine. I put a bigger .wmv file onto the player to see if it had to convert it, and it did. It still played on the player. When I go to hook it to the TV with the A/V cord again, there was nothing but a black screen with the occasional diagonal scan line. The sound is still there.
Besides quirks with the navigational system, the player is still great for music and video. Still, I needed no video capability, and one of the things that made the ZVM a buy for me was watching my vids on the big screen. I'd return this for a second try, but I want to know if this is a recurring issue with you guys and if there's something I can do to fix it before a return. Did I mess with a setting? Should I get new firmware? Did I do wrong using my old charger? If any of you have an answer, or need more info on my situation, please let me know.
And BTW, does anyone know of some better software for organizing files on the ZVM? I used Winamp for my Zen Touch and the music on my ZVM, but videos are another ballpark. I can't transfer a video from one folder to another folder (assuming both folders are on the ZVM). Not to mention the music I transferred using Winamp isn't even showing up in Windows Media Player. I think I need a different program altogether.

I have got a new Creative Zen Vision W and getting the same problem....when i attach to the tv then i am able to hear the audio content and the video does not show.Are we missing something ? or is it a problem with the player. Also the software provided with the Zen converts small .vob files to .wmv when ever the size is large it gives an error 'conversion?unsucessful'.Any body facing similar problems please help.

After my last download I now have video adds that show up in the broswer from time to time. How can I get rid of them.

on my last down load of firefox, I not have two issues that occur, One every once and awhile I get a video ad that shows up in the lower left corn of the browser. I have uninstalled your software and reinstalled and it is still there. Also I get a web site of inksr.com that my trend micro blocks everytime I go to a new web site within firefox. Both of these have started after I was told to redownload your software in order to get the updates to work and not be blocked.

You probably have malware or adware installed on your computer.
I note from your system information you have ''TopArcadeHits 1.0 '' <br /> That is something a lot of users complain about.
Because some of this sort of software is sometimes installed intentionally it is often not detected by malware scans.
Please be aware that this sort of adware is not provided by or downloaded with Mozilla Firefox software.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
* [http://www.bleepingcomputer.com/download/adwcleaner/ AdwCleaner: (for adware)]
* [http://www.kaspersky.com/security-scan Kaspersky Free security scan]
You need to use multiple and up-to-date tools as they will not all pick up the same things.
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good FREE permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

TS3230 Images and Videos Won't Show Up In Safari?

Hi,
I've been having some trouble recently when I browse the web using Safari on my new mid-2012 MacBook Pro. Since sometime yesterday, all images have simply stopped loading on Safari, preventing me from viewing them at all. Websites only show up as text and some graphics (eg, boxes of color, outlines). I have recently been using some approved add-ons from the official Safari extensions gallery, but I have since uninstalled all of them. Is there any way I can prevent this from happening and be able to see these websites properly once again? Thanks! (PS I hope the images I uploaded are showing up, as I cannot see them myself)

Yes - I've been having this problem in Safari 6.0.1 for a while now. I did what you recommended & by trial & error found that:
AdBlock Plus &
Google Disconnect
were the 2 Extensions that were stopping video links from displaying & playing within the web pages. So I've now canned them. Had a similar experience recently with another Extension (forget which one it was but it was screwing up my abilty to use a particular company's services online so I had to S**Tcan it too). These extensions seem quite a bit flakey for my liking.
Anyway video problem all solved now & thanks for the solution!

New 80GB Video Problems-TV Shows

Similar Messages

Maybe you are looking for