New 8100 to replace 8600

Hello - bought new 8100 to replace 8600 pro printer - (print system failure - 3 months out of warranty) - after replacing new ink cartridges for 8600. Put new 8600 cartridges into new 8100 didn't work. I have now put setup cartiridges into 8100 and now "unprotected". What can I do?

The Officejet 8600 defaults to "protecting" the cartrdiges. Once a cartridge has been "protected" it cannot be used in a different printer. I do not know of any workaround for this.
There are a few things to try - you might contact HP and see if they can exchange the cartridges given the circumstances. If you are in the US call 1-800-HPINVENt, elsewhere see the contact information here.
Do you still have the 8600? It may be possible to fix the unit. Have you gone through the troubleshooting steps in this document?
Please post your results here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Why is it that when I add a new bookmark, it replaces one of my old ones?

I have a good number of bookmarks in Firefox. I want to add more, but each time I add a new one, it replaces the last bookmark I added with the new one. That old bookmark is then gone from my list.
Also, normally when I hit "bookmark this page," the box that pops up will automatically be populated with the page title I am trying to bookmark...however, now when I try to add a new bookmark, the box is populated with information from the last bookmark I added.
I have version 3.0.7 for Mac. I really don't want to lose my old bookmarks, and I have a lot of windows I keep open now because there are pages I want to bookmark, but can't.
Any advice is appreciated.

This can be caused by a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

Welcome to the Apple Community.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

I have over 16,000 songs in my iTunes library so I manually manage the music on all my devices. I bought a new iPod to replace an older one. I'd like to transfer all 900 songs to my new device without having to handpick each song. Is there a way to do it?

I have over 16,000 songs in my iTunes library so I manually manage the music on all my devices. I bought a new iPod to replace an older one. I'd like to transfer all 900 songs to my new device without having to handpick each song from my music library. Is there a way to do it?

No. I have quite a few more 16,000, so I don't manually manage. Making playlists for each device makes things much easier to organize. You can create regular lists of essential tracks and smart playlists to automatically catch new content, top rated, most played etc. If you'd done it this way all along configuring a new or restored device would be the work of moments.
tt2

I have just purchased a new ipad2 to replace my old ipad. How do i sync all the data in my apps I am worried about losing my data?

I have just purchased a new ipad2 to replace my old ipad. How do i sync all the data in my apps I am worried about losing my data?

iPad settings and data created and stored by a 3rd party party app along with app settings are included with the iPad's backup along with other data.
If you are syncing your iPad direct with iTunes on your computer via USB, the iPad's backup is updated as the first step during the iTunes sync process.
The first time you connect a new iPad or iOS device to iTunes that is used to sync with another iOS device, you are prompted to transfer the backup for the other iOS device to the new device. This is followed by a sync to transfer the same content from your computer that is on the old iPad to the new iPad such as music, movies, tv shows, 3rd party apps, photos, audio and print books, etc.

RE: Syncing to a "New" Computer or replacing a "crashed" Hard Drive by wjosten

I really appreciate the detail that wjosten provides on the User Tip entitled "Syncing to a New Computer or Replacing a crashed hard drive". I do have a follow up question though about my wife's iPhone 4 running iOS 5.1.1. All her calendar and contacts are on the Cloud - not running through anything like Outlook or Windows Address Book, as far as I can tell. In the past, we previously synched with a PC.
Since the calendar and contacts are on the Cloud, can we synch using the steps wjosten details on a new PC and not lose the calendar / contacts? If not, do you have any advise? Thanks.

If she doesn't want to sync her calendar and contacts with a supported program on her computer such as Outlook, just uncheck Sync Calendar and Sync Contacts on the Info tab of her iTunes sync setting before syncing (which I assume is what she was doing before). She can continue to sync these with iCloud if that what she prefers by going to Settings>iCloud and turning Contacts and Calendars to On).

My mac has10.5.8 and should be compatible with new HP officejet pro 8600. I can't get it to install for wireless, nor to work with USB cable. Have tried downloading HP install directly from HP and it still doesn't work.

I just bought a new HP OfficeJet Pro 8600 printer. I have been unable to download the installation for wireless connection even though have had the assistance of Costco tech, HP tech and some advice from Apple. Because the system is MacOs 10.5.8 the error says it is incompatible, even though the product lists compatiblilty with 10.5, 10.6. I was advised 1 option might be to obtain Snow Leopard for installation, however am somewhat reluctant as the bo states 10.5 should work and Snow Leopard is 10.6, which is also listed as compatible. I am unable to get the printer to work even with USB cable. Too much time spent on this and I hate to start over with another printer because I'm afraid I might have the same trouble. Is Snow Leopard something I should get anyway? Help!

Snow Leopard has more compatible Java.
https://discussions.apple.com/docs/DOC-2455
explains more about upgrading to Snow Leopard.
If that doesn't work to fix the problem, then see my FAQ* on printing:
http://www.macmaps.com/printersx.html

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

New Tab is replacing the Excise Invoice tab on MIGO Header

Hi All,
I have Added new tab in MIGO Header,it is working fine, if i am doing MIGO for Excisable PO , then Excise Details tab is not appearing In my MIGO header (New Tab is replacing the Excise Detils Tab) and at my item level Exise item tab is dispaying.
I have Used BADI : MB_MIGO_BADI
At PBO_HEADER,
data: gf_class_id type migo_class_id.
gf_class_id = 'MIGO_BADI_IMPLEMENTATION_CIN'.
E_CPROG = 'ZMIGO_VENDTAB'.
E_DYNNR = '0001'.
E_HEADING = 'Vendor Details'.
Please help me.

Hello
Refer to below Code.
METHOD IF_EX_MB_MIGO_BADI~PBO_HEADER.
       CHECK I_CLASS_ID = GF_CLASS_ID.
       IF MIGO_HTAB = 'GR'.
         IF G_NO_INPUT IS INITIAL.
           E_CPROG   = 'SAPLZMIGBADI'.
           E_DYNNR   = '9000'.                     "External fields: Input
           E_HEADING = 'EXTRA GR'(001).
         ELSE.
           E_CPROG   = 'SAPLZMIGBADI'.
           E_DYNNR   = '9000'.                     "External fields: Input
           E_HEADING = 'EXTRA GR'(001).
         ENDIF.
       ENDIF.
       IF MIGO_HTAB = 'GI'.
         IF G_NO_INPUT IS INITIAL.
           E_CPROG   = 'SAPLZGDRCV'.
           E_DYNNR   = '9000'.                     "External fields: Input
           E_HEADING = 'EXTRA GI'(002).
         ELSE.
           E_CPROG   = 'SAPLZGDRCV'.
           E_DYNNR   = '9000'.                     "External fields: Input
           E_HEADING = 'EXTRA GI'(002).
         ENDIF.
       ENDIF.
       IF MIGO_HTAB = 'GR'.
         CALL FUNCTION 'ZMIGO_BADI_PUT_HEADER'
           EXPORTING
             IS_MIGO_BADI_HEADER_FIELDS = GS_EXDATA_HEADER.
       ENDIF.
       IF MIGO_HTAB = 'GI'.
         CALL FUNCTION 'ZMIGO_BADI_PUT_HEADER_GI'
           EXPORTING
             IS_MIGO_BADI_HEADER_FIELDS = GS_EXDATA_HEADER.
       ENDIF.
ENDMETHOD.
Abhinav Singh

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks

sgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

I have photoshop CC and lightroom on my computer for 9.99/mo ...i just purchased a new computer to replace my existing computer and need to know how to download photoshop CC and lightroom onto my new computer using my current account so i don't have to pa

i have photoshop CC and lightroom on my computer for 9.99/mo ...i just purchased a new computer to replace my existing computer and need to know how to download photoshop CC and lightroom onto my new computer using my current account so i don't have to pay again

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

Hi howe.sc,
When I checked for how signatures in Yosemite work, I found this.
Mail (Yosemite): Include signatures in messages
Delete a signature from a message: Select the signature, then press the Delete key.
Replace a signature in a message: Delete the existing signature, then add a different signature.
That sounds similar to what you are describing.
Take care,
Nubz

New hp office jet 8600 was perfect until error message appeared

new hp office jet 8600 was perfect until this weekend when message appeared that the printhead was either missing, incorrectly installed, incompatible or not detected.. Windows XP. N911A Series

Follow the instructions on this page to remove and re-seat the printhead: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03096304&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Not able to print to HP 8100 or HP 8600 from mobile device

When I try to print from a tablet to an HP 8100 or HP 8600, the printer just prints one page of junk and then a bunch of blank pages.
In the iPrint Mobile log (/var/opt/novell/log/iprintmobile/iprintmobile0.log) I saw entries such as:
WARNING: Waiting, conversion thread returned without error but converted data still not available.
WARNING: Not converted file: 41.1 ps.
I changed the default rendering PPD as documented in resolution 1 of TID 7013074. The printer result is the same, however, now there are no entries regarding the print job in the iPrint Mobile log.
Since these are HP printers, I attempted to install hplip on the appliance as documented in the additional information portion of the TID. Unfortunately, the FTP download results in "No such file or directory". I sent feedback to novell regarding the TID but have not heard a resolution yet.
Appliance version: 1.0.377.2
Any help would be appreciated.

chris briscoe wrote:
>
> When I try to print from a tablet to an HP 8100 or HP 8600, the
> printer just prints one page of junk and then a bunch of blank pages.
>
> In the iPrint Mobile log
> (/var/opt/novell/log/iprintmobile/iprintmobile0.log) I saw entries
> such as:
> WARNING: Waiting, conversion thread returned without error but
> converted data still not available.
> WARNING: Not converted file: 41.1 ps.
>
>
> I changed the default rendering PPD as documented in resolution 1 of
> TID 7013074. The printer result is the same, however, now there are no
> entries regarding the print job in the iPrint Mobile log.
>
> Since these are HP printers, I attempted to install hplip on the
> appliance as documented in the additional information portion of the
> TID. Unfortunately, the FTP download results in "No such file or
> directory". I sent feedback to novell regarding the TID but have not
> heard a resolution yet.
>
> Appliance version: 1.0.377.2
When you say you are trying to print from a tablet, do you mean an iPad
or an Android tablet? If it's an iPad, are you using Airprint or the
iPrint app? Are you using the internal renderer or external renderer?
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

I just purchased a new iMac to replace our older one We are giving our older one to parents and want to wipe the HD. The discs I have for my old iMac is for version 10.5 but I have 10.6.8 currently. Is there a way to wipe the HD and keep 10.6.8?

I just purchased a new iMac to replace our older one. We are giving our older one to parents and want to wipe the HD. The discs I have for my old iMac is for version 10.5 but I'm currently running 10.6.8. Is there a way to wipe the HD and keep 10.6.8?

No. Wiping the HD will erase the OS on it.
(95074)

New 8100 to replace 8600

Similar Messages

Maybe you are looking for