New 9 Cell S10 Battery-Advcie For First Time Charge and After?
Did search on first time charge for laptop batteries. I just picked up a 9 cell laptop battery for my S10. What is the best way to keep the life of these battries long. Read discharge fully then charge for 12 hours. Read charge fully then discharge 3 x's.
Any one know for sure? Please advise!-Thanks.
PS- the battery came charged at 81%.
Hi ... i did the first 3 x times charged full / empty .. later you can charge if you want / need the battery ... if you use long period of time plugged with psu (week, month) ... its better to eject the battery ..
store at cool & dry place... and use it when you want mobile
thats only my suggestion
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1
Similar Messages
-
My refurbished iPad 3 charged for first time it and charger got very hot is that normal
just replaced my refurbished iPad 3 with another. Tried to charge it for first time. Noticed it got very hot and so did charger. I don't recall my other iPad doing this is this a defect in the ipad?
Define "hot".
If fully drained both the battery (that essentially fills up most of the body of the device) and the charger will get quite warm, though not unbearable. Time to charge will vary according to device: my iPad 4 takes about 6 hours if almost flat, but takes about 40 min if at 75%.
Be sure to use ONLY its original charger OR chargers that are rated for iPads. They draw twice the current as phones and will cause phone chargers to get much warmer than usual. -
It asks me, in apple tv when I go to my "Library" to turn on home sharing. It's on. When I turn it off and back on I can access my itunes stuff fine for a day or two and then it doesn't work again. I've tried unplugging appletv, reboot the router (att uverse), and then plug in apple tv again and it doesn't help. it's still give me the message. the only thing that works, temporarily, is to turn off home sharing and turn it back on.
I'm using itunes version 10.5.0 on windows 7. can someone help me with this? I can't run up and down the stairs all the time. I have bad knees and other conditions that stop me from doing that. Please help.
Thanks.
Jim.Hey all,
I've been having similar problems so I put a packet analyzer on the network to see what's really happening. (Apologies in advance if this post is too techno-babbly...)
Some background:
How do Apple devices find each other over the network?
iTunes with home shaing turned on sends out a message to a special IP address called a multicast (224.0.0.251, in this case.) All your Apple devices listen to this multicast address and respond over that same address. This process applies to iTunes, AppleTV and Apple Remote at least (those are the things I've been testing with.)
How do Apple devices communicate with each other once they're found?
Once they find each other, they establish a Transmission Control Protocol (TCP) communication session. This connection is only between two devices. In this case, iTunes and AppleTV or Apple Remote and AppleTV. The TCP session is how data gets transferred between devices.
The problem:
I captured the protocol traffic between my PC and AppleTV first with the firewall software turned off. In my case, I use Norton 360. What I see is iTunes and AppleTV communicating over the multicast address every 100 seconds. My iTunes usually 'disappears' from AppleTV and the Apple Remotes within about 5 minutes so I left the firewall off for half an hour and everything worked fine. I turned the firewall software back on and then restarted everything. iTunes then did the device discovery and all the devices found each other. Then, after a period of about five minutes of inactivity, the multicast discovery protocol stopped being sent by my PC. Why? I really don't know. From watching the apple protocol's timing, contents and behavior, I see nothing wrong with the implementation. I've done troubleshooting on other location-based multicast protocols for work and have seen some dumb things but Apple's protocol is done correctly and behaves exactly as I would expect.
The solution:
I put a rule into my firewall software explicitly allowing the multicast IP address and also the local subnet that my devices use. I then moved the new firewall rules to the top of the list to ensure that they will be 'hit' before any of the other rules in the list. After that, I left the firewall on and tested for a while then left everything idle for an hour. When I came back, everything still worked. I would suggest that replacing your firewall software won't necessarily help you here. You just need to make sure that the rules for the Apple stuff are put in manually and are at the very top so that another deny rule in the list doesn't trigger before the new permit rules. Hopefully it goes without saying but doing the above leaves your PC completely wide open on the local network so, if you use wireless, please be sure to use encryption on it.
Hope that helps... -
Triggering an event when the new AIR application installation has done for first time in machine
I am installing AIR application from web page by using a badge.Is it possible to call a function once the installation of AIR app was finished[once we click finish button in the installer] to update the AIR application version dynamically inside our code.If so please share. Any suggestion would be appreciated.
Hi Rizwana,
So as you said that you had created a event linkage between change document object and Business object you can now switch on the event trace SWELS and go to the particular transaction by which the event of this Business Object gets triggered ( the event you mentioned in SWEC). Switch of the event trace (SWELS) and check the Business object that had triggered in SWEL transaction.
Hope this would help you.
Any clarification.. then please revert back.
Good luck
Narin -
How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.
If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/ -
if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is. -
What should I do to setup a new MacBook pro for first time when moving from a PC?
What should I do to setup a new MacBook pro for first time when moving from a PC?
you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
http://support.apple.com/kb/HT4796 -
i have set up my wifes ipad mini wirelesly, i am now connecting for first time to itunes it asks if i want to set up as new ipad or restore from previous backup (my iphone not ipad), i have backed ipad up to icloud when i connect back to itunes will it give me an option to restore from icloud, i dont want to lose the apps and data my wife has already installed through her account... any thoughts
1. set up as new
2. transfer you wife's purchases.
3. Just in case create one computer back up manually.
Enjoy. -
I start my new iPhone 5s 64 for first time , no hello screen , only white screen with black apple logo
How can I start my iPhone (I already did restart - it didn't help)Did you activate the phone already?
-
Just hooked up new apple tv for first time. able to connect to internet (netflix, youtube) but not able to connect to my itunes account via home sharing. apple tv tells me to make sure computer's itunes has home-sharing enabled, which it does. any advice?
Have done both suggestions, still not working. Could it have somehting to do with my local network? I am using a wireless Internet provided by my apartment building so not sure if apple tv and my computer are not technically on the same "local network?"
apple tv and main computer are connecting to Internet fine. Just cannot see my itunes on apple tv.
any other advice? My itunes is turned on to home sharing. i entered the same apple itunes account into aple tv. but appletv keeps saying my computer's home sharing is not turned on...but it is. -
Performance issue in browsing SSAS cube using Excel for first time after cube refresh
Hello Group Members,
This is a continuation of my earlier blog question -
https://social.msdn.microsoft.com/Forums/en-US/a1e424a2-f102-4165-a597-f464cf03ebb5/cache-and-performance-issue-in-browsing-ssas-cube-using-excel-for-first-time?forum=sqlanalysisservices
As that thread is marked as answer, but my issue is not resolved, I am creating a new thread.
I am facing a cache and performance issue for the first time when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users system (8 GB RAM but around
4GB available RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cube DB - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after daily cube
refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (32 GB RAM, around 4GB available RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
As mentioned in my previous thread, we have already implemented a cube wraming cache. But, there is no improvement.
Currently, the cumulative size of the all 4 cube DB are more than 9 GB in Production and each cube DB having 4 individual cubes in average with highest cube DB size is 3.5 GB. Now, the question is how excel works with SSAS cube after
daily cube refresh?
Is it Excel creates a cache of the schema and data after each time cube is refreshed and in doing so it need to download the cube schema in Excel's memory? Now to download the the schema and data of each cube database from server to client, it will take
a significant time based on the bandwidth of the network and connection.
Is it anyway dependent to client system RAM ? Today the bigest cube DB size is 3.5 GB, tomorrow it will be 5-6 GB. Now, though client system RAM is 8 GB, the available or free RAM would be around 4 GB. So, what will happen then ?
Best Regards, Arka Mitra.Could you run the following two DMV queries filling in the name of the cube you're connecting to. Then please post back the row count returned from each of them (by copying them into Excel and counting the rows).
I want to see if this is an issue I've run across before with thousands of dimension attributes and MDSCHEMA_CUBES performance.
select [HIERARCHY_UNIQUE_NAME]
from $system.mdschema_hierarchies
where CUBE_NAME = 'YourCubeName'
select [LEVEL_UNIQUE_NAME]
from $system.mdschema_levels
where CUBE_NAME = 'YourCubeName'
Also, what version of Analysis Services is it? If you connect Object Explorer in Management Studio to SSAS, what's the exact version number it says on the top server node?
http://artisconsulting.com/Blogs/GregGalloway -
Error when booting app server for first time
Hi All,
My OS is OEL 6,PT 8.53 and HCM9.2 after creating the app server domain and booting it for first time i am getting an error as below,
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 221921 -D TESTSERV - S PSWATCHSRV :
CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha ndler
exec tmshutdown -qy
Any help appreciated.
TUXEDO LOG Says,
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: client high water (0), total client (0)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162258.wipcoe1234!PSADMIN.5355: Begin attempt on domain HCMDM92
162302.wipcoe1234!tmadmin.5392.1509406464.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
162304.wipcoe1234!tmboot.5393.2297452288.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162306.wipcoe1234!BBL.5394.2180380416.0: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit, Patch Level (none)
162306.wipcoe1234!BBL.5394.2180380416.0: LIBTUX_CAT:262: INFO: Standard main starting
162308.wipcoe1234!tmboot.5397.3909768960.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162308.wipcoe1234!tmboot.5397.3909768960.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
162311.wipcoe1234!BBL.5394.2180380416.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
162314.wipcoe1234!PSADMIN.5355: End boot attempt on domain HCMDM92
Edited by: ajith on May 3, 2013 5:39 PMIf not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas. -
Itunes application error when attempting to open for first time. HELP
Running windows xp pro, just bought new ipod classic, installed itunes software. When attempting to open for first time i get an itunes.exe - application error, error message that reads "The instruction at "0x100001040" referenced memory at "0x100001040". The memory could not be "read". Click ok to terminate the propgram. Click on CANCEL to debug the program. I have tried re-installing several times, cleaned temp etc. Nothing. Please help, i really want to start using my new ipod.
You have to unhide your library folder and adjust the user permissions to allow write access.
Mylenium -
When itunes load for first time ,the ios operating system load automatically?
I connect my ipod for first time ,and download itunes, but an operating system doesnt show in settings /general/ doesnt appears software??
can somebody tell me what to do ? or if my ipod may be is not working properly? and any time I try to download an apps , read need ios5.What then does show?
Did you setup/activate the iPod? You have to do that via wifi (for newer ones) or conneft to iTunes and restore
iTunes: Restoring iOS software -
New IBM JDK 1.4.2 for SAP NetWeaver 2004 and 2004s
In May 2006 IBM System p brand and SAP announced the direction to enhance the IBM AIX 5L JDK 1.4.2 for SAP NetWeaver 2004 and SAP NetWeaver 2004s based applications. The new IBM JDK 1.4.2 for SAP NetWeaver applications on AIX 5L is 100% upward compatible for all SAP business applications and, compared to the classical AIX JDK, provides a more consistent runtime behavior, enhances memory management, and improves debugging capabilities.
<b>General Availability (GA) of the new IBM JDK 1.4.2 for SAP NetWeaver 2004 and 2004s on AIX 5L</b>
As part of a staged release process aligned between IBM and SAP a customer pilot program was started in August 2006 followed by a Controlled Availability (CA) program. Based on positive customer feedback resulting from real production usage and the very encouraging internal test results, the new IBM JDK on AIX 5L is/will be generally available
for SAP NetWeaver 2004 SP14 and above starting at 5th of February 2007
and
for SAP NetWeaver 2004s SP06 and above starting at 30th of March 2007.
This means systems running above SAP NetWeaver releases in an AIX 5L environment are allowed to use the new IBM JDK without restrictions.
This announcement does not affect the use and support of the classical AIX JDK outside SAP environments.
<b>Transition Plan to the new IBM JDK 1.4.2 on AIX 5L</b>
SAP will support the classical and the new JDK in parallel for a limited number of NetWeaver support packages. Afterwards only the new IBM JDK will be supported:
for SAP NetWeaver 2004 the first support package only supporting the new JDK will be SP21 (planned date for SP21 see http://service.sap.com/~sapidb/011000358700001130682005E),
for SAP NetWeaver 2004s it will be SP14 (planned date for SP14 see http://service.sap.com/~sapidb/011000358700004584092005E).
So please plan a transition to the new JDK prior to the upgrade to these support packages.
SAP and IBM strongly believe that the switch to the new JDK will improve your experience with JAVA based SAP applications on AIX 5L. Both companies recommend upgrading to the new IBM JDK 1.4.2 for SAP applications running on AIX 5L as soon as it matches your companys maintenance plans.You can download the JDK directly from the sun java website...
http://java.sun.com/products/archive/j2se/1.4.2_12/index.html
I don't think Ubuntu is supported...
Regards
Juan
Maybe you are looking for
-
Query on memory consumption during SQL
Hi SAP Gurus, Could I kindly request for your inputs concerning the following scenario? To put it quite simply, we have a program where we're required to retrieve all the fields from a lengthy custom table, i.e. the select statement uses an asterisk.
-
I am looking to make a trivia game as a special feature on my dvd for my kids...1 trivia game per each kid 10 questions each...After each question a track is going to with them saying YAY or NO and then it proceeds to the next question....The questio
-
External application input/output
Hi. I'm trying to communicate with an external shell program - this takes input, goes away and does stuff which includes generating a lot of output, and then requires more input. I need to know when the process is ready for input again, before I send
-
1 mac book and 2 touch on an diffrent name
hello I have an macbook and an ipod touch everything is working ok. Now my bestfriend have also an ipod touch but no pc. So we like to connect it with mine macbook. Can you have or does it work to have 2 touch with an different name on 1 macbook? i h
-
Photos must quit because the photo library has become unavailable or its data is corrupt
Hello, As many of you, I've installed photos. This is my problem: I am an enthusiastic photographer that keeps around 10K photos per year (approx. 60GB), and while I have several years of pictures, I've just get the last 5 years. To be honest, I neve