New ABAP ENGINE NSP 6.40 and BSP error

Hi,
after a clean new install that went nearly perfect, I'll managed to get a license and a developer key (Kudo's to all who worked on the new release, the new system looks really like a smooth runner).
I'll activated the BSP services with SICF, still cool.
I'll try now to get the BSP-Examples running (SE80, BSP application SBSPEXT_TABLE). When I try to test default.htm , I do get the message
'URL not fully qualified, it is xyz instead xyz.com.'
Since this is an intranet install, I do not use dns names in the network.
Any hints where to set up to use no DNS in the BSP?
Message was edited by: Holger Stumm

Hello Holger,
to get the Test Button work in SE80 go to Utilities -> Settings... -> Tab: Business Server Pages and enter this:
Log                  HTTP
Application Server   LOCALHOST
Port Number          8000
You can run BSP Pages directly without further configuration if you are working on the same computer as the server runs.
Regards
Gregor

Similar Messages

I am trying to upload new version iTunes into Windows 7 and getting error message that runtime is loading incorrectly. Cannot connect to online support. Any ideas please?

I am trying to upload new version iTunes into Windows 7 and getting error message that runtime is loading incorrectly. Cannot connect to online support. Any ideas please?

See Troubleshooting issues with iTunes for Windows updates.
tt2

CRM 7.0 - New mailform in the email profile causing BSP error

Hi all,
I want to start to use standard responses in IC to make it more easier to reply to incoming emails... and also the tracking service ticket ID text in replies...
I followed John Burton's ERMS guide, but after I created new mailform via txt CRM_ERMS_MAILFORMS it was not possible to select it in e-mail profile... So I went to the webclient and created one more new mailform via webclient page . Afterwards this mailform was visible and able to select in the e-mail profile.
I tested to create new email, but page was not displayed and it all ended in BSP error stating that error MAIL_NOT_FOUND exception... It seems like this mailform is not recognized by ERMS ...
Same error happens when I select this mailform as one of the standard responses in response group and do not want it as automatic tracking text in the email reply...
Can you please help me with this issue? what's wrong with this mailform or do I miss some additional ERMS customizing?
Thanks a lot for help.

Seems like the problem is the format of mailform (I changed it to "plain" text from HTML and it works correctly)... I need to test it also on different enviroment before I will close it...

Performance of XSL Mapping in the ABAP Engine

Hi All,
Is the performance of XSL Mapping in the ABAP Engine better than java and graphical mapping. XSLT on the java stack has performance issue handling large documents.I want to know how far XSL Mapping in the ABAP Engine performs when compared to java/graphical mapping in the context of large inputs(>1MB).
Anticipating your valuable inputs.
Regards,
Sudharshan N A

Hi Sudarshan,
Please go through the below link for a very clear understanding of the performance of the Mapping techniques...
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
Hope this helps
Regards
Kiran..

WPA2 Security and Recv Errors.

Copy of a post I posted a couple of hours ago in the Airport Extreme 802.11n forum. As the issue could be MBP related I thought I'd post here too. Any (relevant) suggestions most welcome. Thanks.
In the ongoing quest to try and find out as much as I can about what was causing my AEBS to crash I noticed while looking at the Network Utility Info tab (Utilities/Network Utility/Network Interface (en1) that there were a large number of recv errors and they were increasing as I watched. It was rather like watching a ticker.
I did a bit of research and noticed that some people related the issue to WPA so I did a test.
I stopped the AEBS. Network Utility Reported
Sent Packets 5617335
Send Errors 4
Recv Packets 32254109
Recv Errors 46323
Collisions 0
I'd been watching the recv errors creep up.
I turned off security on the AEBS
An hour later I had
Sent Packets 5821527
Send Errors 4
Recv Packets 32860781
Recv Errors 46323
Collisions 0
So in an hour of hard use, no errors - they just stopped.
I then stopped the AEBS and turned WPA2 back on.
I got this about a minute or perhaps two after re-starting the router.
Sent Packets 5823694
Send Errors 4
Recv Packets 32864168
Recv Errors 46377
Collisions 0
That was about 20 mins ago. Errors are now at 46728 sorry 46729, sorrry 46754, Sorry 46784
You get the idea.
I wonder if anyone has any ideas? My concern is that it could be that the high error rate could be related to the AEBS crashes.
Thanks for reading.
Cheers.
POST -http://discussions.apple.com/thread.jspa?threadID=1134458&tstart=0

Thanks Ned.
I just tried on a new Core 2 2.4 which I happened to have lying around
Same thing. Errors when WPA 2 enabled, none when WPA 2 turned off. This is running n at 5ghz. Mind you, the errors on the new machine were in the hundreds and the errors on mine are in the thousands.
At 10.18 I had 73820 errors
At 10.44 I had 78662 errors
At 10.55 I had 79263 errors - I turned off WPA2
At 11.05 I have 79263 errors - ie none since I turned off WPA2
With the Santa rosa machine, I moved a 7gb file from my Airport Disk and got 300 errors with WPA2
Moved the same file again without WPA2 and got none.
I haven't tried 11g yet - only have so much time, but to be honest - and I understand you mean for diagnostic purposes - if they stop at 11g it doesn't help much as I need 11n or I would have stuck with the 54g Belkin I bought 3 years ago for $10. I'll try it a little later though out of deference.
If you get a chance, if you could take a look at your recv errors (assuming you use WPA2) I'd be very grateful.
Cheers.

Sneak preview Was 6.20 and New Abap Editor

Hi to all,
i've just installed the MiniWas 6.20 on my home pc.
It works great (wowowow!!!) but ... i'd like to work with new Abap/4 editor (included in the NetWeaver Sneak preview 2004 's' Abap).
Is it possibile install editor (and use) on the miniwas 6.20 system? Is there a weblog/post that describes how to do that (possible a step-by-step procedure)??
Thx a lot for your answers/hints/comment (the most usefull, will be surely rewarded).
Andrea

Hi Andrea,
The only reason I could keep the 6.20 version is the memory requirement.
I installed 6.20 on 256MB, it was slow, but it was running. On 512MB it was quite fast.
7.00 won't work on 256MB, with 512MB is quite slow, with 1G it's OK.
Considering the default miniwas SP level, which is around 25 and the new editor would need 59, it would be a huge amount of work.
I'd suggest to save all of your work in transport requests and release it. Copy the data and cofile files to a save place and uninstall 6.20 and install 2004S/700. You can import all of your work back to release 700.
This way you would get a much more ABAP tool /6.40: Shared memory, Assertions and dynamic breakpoints, new debugger, Adobe forms, etc 7.00: New ABAP editor, Webdynpro ABAP, Enhancement Switchwork, Regex, etc /.
Never the less, I'd suggest to apply SPs on 700 as well, so you'd get the Regex demo toy and the New BSP editor and several cool features of the ABAP webdynpro /eg debuuger integration/.
Cheers,
Peter

When I go to google on firefox and search for a topic, I try to open a website and another website (morsearch, clickkick, etc) will open up instead into a new search engine with the same topic . What is this?

I go to google. I type in "plants". A lot of sites will pop up in google. I click on a site (does not matter which usually). The site will then start to switch to a new url from (click kick, morsearch, etc) turning into a new search engine with the same topic and more options. I never get to the page I want unless I type the url directly into the address box. It always comes back with a search engine. So far I have found this only happens while starting in a search engine. When I get into the actual page, everything is fine. I am using McAfee for security and it hasn't caught a virus or anything yet. Help please! Thanks!

Install, update, and run these programs in this order. They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. '''''(Not all programs detect the same Malware.)'''''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

Sneak Preview of WAS 640 and ABAP Engine

Hi all,
I installed the Sneak Preview of the WAS 6.40 on a WinXP system an tried out most of the examples and tutorials.
It is working fine and the developer studio is also very nice.
I am wondering whether the abap engine is also available in the sneak preview or is it restricted to the java side only?
Best Regards,
Steffen

Hi Steffen,
all you need for this type of communication is already included in the WAS. There's a lot of documentation available:
JCO (Java Connector for ABAP backends): http://help.sap.com/saphelp_nw04/helpdata/en/35/42e13d82fcfb34e10000000a114084/frameset.htm
Generating proxies "around" JCO (very useful feature of the developer studio):
http://help.sap.com/saphelp_nw04/helpdata/en/ed/897483ea5011d6b2e800508b6b8a93/frameset.htm
Using ABAP EIS in a transactional J2EE environment via J2EE connector architecture: http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5caa85b11d6b28500508b5d5211/frameset.htm
This should be sufficient for the beginning
Hope that helps.
Best regards
Stefan

Where are the buttons gone File upload and Download in New ABAP Editor

Where are the buttons gone of File upload and Download in New ABAP Editor in ECC 6.0.
Or some new utility added for this feature.
Kindly guide.
Thanks,
pradeep

Go to Utilities>more Utilities>upload/download is there.
Amresh.

OO ABAP and BSP coding standards

Hi,
Can anyone send me the documnet for OO ABAP and BSP coding standards.
Points will be rewarded.
Regards
Sandeep Reddy

Hi,
Can anyone send me the documnet for OO ABAP and BSP coding standards.
Points will be rewarded.
Regards
Sandeep Reddy

JSON with ABAP webservices and BSP

Hi All,
I am new to JSON,
Could you please provide information related JSON with web services and BSP services.
Thanks in advance,
Rajesh.
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Jan 9, 2012

The actual truth is that MVC (controllers) has nothing to do with frames or not.
Look at the problem from the browser side. Here you require a frameset (or you can look at iframes) to achieve what you want. So the browser must call an URL, let us call it default.htm, that will render out the frameset. This default.htm can be a page, a controller with print_string instructions or even a controller that calls a view that prints out the HTML. Personally, I simply use a page.
Default.htm will then have source about like this:
<frameset>
<frame src="applog.do" ... >
<frame src="personaldata.do" ...>
</frameset>
Please check HTML documentation to get <frameset> correct, including things like fixed sizes and scrolling. Also, frameset documents have a different page structure than normal HTML pages, and does not for example have a <body> sequence. Most people make mistakes here. HTML documentation is highly recommended. (There are no tags to render out framesets. You should just write the HTML directly.)
The important aspect here is that we are just using the URLs of the different controllers to load them into the different frames we require. From view of the browser, these are just URLs that will return HTML. Whether pages or controllers+views are executed to generate the HTML makes no difference to the browser.

ABAP and BSP

Hi,
I have an ABAP report and I want to diplay the output on BSP...
but from time to time I have to refresh the BSP data (for refreshing I don't have problem) refreshing is meaning that I have to bring the data from reprot to the BSP.
Basically, there is an interaction between ABAP report and BSP to exchange the data.
please, I need a help... this is an Urgent development....

many thanks for you... this is the one Exporting / Importing.
now almost my my first BSP is finished, the remaining problem is:
(1) how i can color the row based on the values in BSP page. for example,
int_employee-salary "is salary fields of employee record"
if int_employee-salary > 5000
colore the record with red
elseif int_employee-salary > 10000
colore the record with green
......... etc.
i found this link but i didn't understand...
http://help.sap.com/saphelp_nw70/helpdata/en/28/4bae407e69bc4ee10000000a1550b0/frameset.htm
Message was edited by:
Lezarazo Thoram

Problem to use new abap editor and new abap debug.

HI experts.
currently using 640(patch 19) and GUI 640(patch 23).
but when I activate new abap editor in se80 server dumps error
' Runtime Errors MESSAGE_TYPE_X
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).'
and new debug does not activating even though I switch to new debug.
it works well both new editor and debug if I turn on new options when I connect ECC6.0 with same GUI
guess 640 server has not propery installed new editor and debug or something has to be checked.
can anyone help me to activating these new functions?
thank you.
Lee

There is a separate forum for the SAP GUI, please post your question over there and close this thread here.
Thx

New Render engine and google

The new render engine seems faster and I like that. But I just for interest sake I tested the new render engine with Google page test. Now I thought that one of the thing people complained about was Google complaining about leveraging browser caching and spitting up warnings regarding no expiration date set. It is still doing this. Google seems to place large importance on this and the expiration date. Question is this relevant or something to ignore?

The thing is that the browser caching and information google page speed gives is a recommendation. It is based on certain methods NOT ALL of them. The way BC are doing it currently and even better with the new system is not one that will show up on something like that. I can give you a lot of sites that rank well but fail on this because the way their caching works is not one that is picked up by pagespeed.
There are other things like if you put the same site in Australia on the US DC and then run pagespeed - It will be better because that is where it is run from.

ABAP Engine Installation on AIX Cluster

Dear All,
I want to install ABAP Engine on Clustered IBM Server environment with O.S. AIX and Oracle DB. I am new to AIX and Cluster environment. Can anyone help me with the installation guide, or any related documents in this regard will be helpful..
If possible please mail me the procedure / guide on [email protected]
thanks.
Prashant.

Hi,
The required documents for installation are available on http://service.sap.com/instguides
Regards,
Siddhesh

New ABAP ENGINE NSP 6.40 and BSP error

Similar Messages

Maybe you are looking for