New AC router, new MBair, not picking up AC signal?

I found this post and followed the instructions:
https://discussions.apple.com/message/22250690#22250690
Here is a shot of what I see:
But when I go to the system info, I see that I do have an AC card. The router is brand new (got it today special delivery from Comcast, (THANK YOU GOOGLE FIBER FOR ADDING COMPETITION!) so I know I have all the AC stuff, but for some reason my computer doesn't grab the AC signal from the router (which is also the modem)
thoughts? Thanks for your help!

There is nothing in the User Guide that tells me that this Cisco product is "ac" capable, nor can I find any other specifications that indicate that it has "ac" capability.
The specifications below indicate 802.11a/b/g/n capabilities. I see no "ac" listed.
http://www.alibaba.com/product-gs/1320790584/Cisco_voice_gateway_3939_Model_DPC3 939.html
Do you have some other specifications to indicate that this model has "ac" capability?

Similar Messages

Airport card not picking up any signals after IP configuration changed

Just had cable internet installed in my apartment, and in the course of setting up the IP configuration for the built-in ethernet connection, my airport card has stopped recognizing wireless networks in my building. Before I changed these settings, the card was working, and there are several networks in the building that it recognized. Now, it recognizes none. The menu appears in the top bar, and I can turn the airport on and off, but it simply is not picking up any signals whatsoever.
I have tried a handful of tactics, including changing the Airport TCP/IP configuration in several different ways, rebooting several times, and even removing and reinserting the Airport card.
For info: I'm using an iBook G3 with OS 10.2.8. (I know, pretty old, but it's still chugging along...)
Any help you can offer would be greatly appreciated!

Not sure. What's strange is that the very same computer was picking up signals (not accessing them b/c they were all password protected), recognizing networks in the area at least, before I played with the other IP configuration settings. Now it picks up none. It shows that there are none in the area, even though I know that there are.
Also, often, when I click on the Airport icon in the menu bar, the computer hangs for up to a minute before the menu actually pops up.
I have an Airport Express unit that I have hooked up to the cable modem, and my Airport card won't even recognize that signal. I'm just not sure what I changed that made it go haywire. I've been using this computer on wireless networks for the entire time I've owned it. Never had this problem before yesterday.
Thanks for any additional suggestions anyone can offer.

HT201412 My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail

My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail

Try resseting the network settings in settings>general then go to reset a the bottom.
Then reset NETWORK settings.

TS4148 I have an iphone 4s version 6.1 carrier o2-uk but it will not pick up any signal what do i do?

i have an iphone 4s version 6.1 carrier o2-uk but it will not pick up any signal what do i do?

I got my real add-on work on FF4 now. Here is what needs to do (on VS2005)
In project property 
C++ 
General/Additional Include Directories - xulrunner-2.0.en-US.win32.sdk\xulrunner-sdk\include 
Preprocessor/Preprocessor Definitions - MOZ_NO_MOZALLOC;XP_WIN;XP_WIN32
Linker 
General/Additional Library Directories - xulrunner-2.0.en-US.win32.sdk\xulrunner-sdk\lib 
Input/Additonal Dependencies- nspr4.lib xpcom.lib xpcomglue_s_nomozalloc.lib
Update module cpp by following the sample 
http://mxr.mozilla.org/mozilla-central/source/xpcom/sample/nsSampleModule.cpp
Add two extra directives on chrome.manifest 
interfaces <path/to/your/xpt> 
binary-component <path/to/your/dll>
Add unpack property to install.rdf if needed
https://developer.mozilla.org/en/Install_Manifests#unpack

Exchg rate from new exch type X is not picked up in Treasury transactions

Dear All,
I am maintaining a new exchange rate type for treasury transactions called "x". I have made all the settings required for this. Following is the series of steps configured to pick up the exchange rate maintained for type "x" for a Interest rate instrument foreign currency transaction.
*Genaral Settings*
1) Define exchange Rate(E Rt) type 'X'.
2) Define translation ratios for curr translation
     X     usd     inr     1:1
     X     inr     usd     1:1
3) Define new doc type "ZF" with exch rate type "X"
4) Define Exch rate calculation indicator
     02     X     X
*Treasury settings*
5) Define company code additional data
     Rate Calculated     02
     Rate type(Debit)     X
     Rate type(crdit)     X
6) Assignment of valuation areas to accounting codes
     ER type      X
7) Define account determination
Doctype "ZF" assigned to the relevant posting specs
Document Splitting
8) Classify doc types for doc splitting
     ZF     0000     0001
9) Exch Rate of "X"
X     01.01.2006     usd     47.36     inr
after maintaining all these details I am trying to post an FC transactio using tcode TBB1. Everything is fine no errors nothing I can post the document also but THE EXCHANGE RATE MAINTAINED FOR TYPE X IS NOT PICKED INSTEAD RATE FOR TYPE M IS PICKED UP".
please advise if i missed something. I am not able to trace why the SAP is picking rate from type M when I made settings to pick the rate from type X.
Rgds
Komal

Hi
Generally for posting FI documents (which is what this T Code does) , M alone is used which is the standard SAP system functionality. For other purposes like valuation, translation, etc. we can have different exchange rate types.
Jayaram

New super router now shoutcast not working in firefox but does in chrome. Problem?

Updated my connection to Fibre so have new super router (still ADSL I think). Now my Internet access - no problem with all my other sites. Shoutcast displays OK but no sound, analyzer shows flat line. No other changes have been done on computer. What can be the problem?
cheers Omhie

Hi omhie2,
It is possible to check how Firefox connects to the internet: [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption]] specifically [https://support.mozilla.org/en-US/kb/advanced-settings-browsing-network-updates-encryption#w_network-tab this section] will help troubleshoot the network that may not be detected.
After trying each one, doe Firefox connect to the new connection?

*BOOT CAMP* Windows XP not picking up wireless signal on Lion

I just got a new iMac two days ago and was able to install Windows XP from my old Dell Latitude boot disk. Yes, I thought it was odd... But it worked. I do understand that Lion only provides Windows 7 drivers in Boot Camp Assistant, but I was able to install Boot Camp 3.0 and 3.1 drivers for XP, right from the Apple Support Boot Camp driver link.
Well... My main issue lies here... When I switch to the XP side, it wont pick up a wireless signal. That's all I need so that I can start updating Windows from the internet, but it is not picking anything up.
I'm assuming that I am just missing the driver, but like I said, I installed the drivers provided by Apple. This is very frustrating and am not sure what to do.
Can someone PLEASE point me in the right direction? Thanks in advance.
Brian

This appears to be a problem with some of the newest MacBooks. There are several posts on this issue. It is possible that, as you seem to have noticed, switching to an NTFS formatted partition will solve the problem. See e.g. http://discussions.apple.com/thread.jspa?messageID=5947955&#5947955

Addition of a new row in VO is not picked by EO.

Hi,
I have a page consisting of 2 table regions that fetch row data from a ParameterVO1 and ParameterVO2 ( 2 instances of same VO i.e. parameterVO).But, insertion of a row in ParameterVO1 doesn't make any change in no. of rows in paramterVO2.This may be happening because changes in ParameterVO1 is not reaching parameterEO.
Is there any way so that insertion of a row in VO updates EO too.
INSERION CODE:
Parameter1VOImpl paramVo1 = this.getParameter1VO1();
Parameter1VORowImpl row1 = (Parameter1VORowImpl)paramVo1.createRow();
row1.setName("TEST345");
row1.setType("HARDCODED");
row1.setServiceoperationid("Test20_Createtest20");
row1.setOperationid(operation);
row1.setParameterid(operation + "_TEST345");
paramVo1.insertRow(row1);
Regards,
Gyanendra Pandey

Hi Nibha,
Table maintenance generator screen is an automatically generated screen. You cannot to any changes in that and neither can you do the changes in the PBO and/or PAI.
You can do it but it will ask you for SAP key etc. So there's not need to do it that way.
What you could do is;
1. Go to the table maintenence generator from SE11, in Change Mode.
2. Click on change icon. The system will show the 'Change Generation Elements' screen where it sill ask you the resson
    for change.
3. Click on the New Field/Sec. table in struction (or whichever is appropriate/applicable in your case)
4. Press Ok (Tick sign).
5. Then it will show you the ''Change Generation Elements: Detail' screen.Here;
       => You will select the maintenance screen that you wish to change( Overview/Single).
       =>   And the Field Type. Whether it is a key field or normal field.
              Select which ever is applicable.
6. The system will then re-generate the screen for you and - You'll Smile! - that you got the answer!
Cheers!
Sanjiv

Not picking up N signal from router

I recently purchased a NetGear RangeMax Dual Band Wireless N Router. I live in a three-story townhome, with a Mac mini on the first floor and an Imac with Airport Extreme on the third floor. I hooked up the router to my Comcast modem and the router to the Mac mini, which supports G band, not N. However, I shut off airport at the mini so that it was receiving the signal directly through the cable. The router was set up manually, per the instructions for Mac and Linux users. I went upstairs to my Imac and only received a G signal. It also showed that I was only connected on Channel 11, not the higher channels usually subscribed to N standard routers. When I went to check the router, it showed it was set up for Channel 44/5.220GHz on JohnN and Channel 11/2.4GHz on JohnG. I've spent hours on the phone and e-mailing NetGear's tech support people, to no avail. I'm ready to take it back to the store and get my money back. I thought I would try going to other Apple users and see if they have had a similar problem. When I go online with the Imac and it shows available networks, it shows JohnG, along with other neighboring networks, but no evidence of JohnN. The router seems to be operating properly, from what I can, so I can only assume there is something missing at the Imac's end. Any thoughts, ideas or suggestions would be greatly appreciated. Although I have been using a Mac for years, it belonged to a friend and I went to his office to use it. He has since moved and I bought my own. This is my first time on Apple Discussions. Thanks for whatever help you can offer.

imonboard, Welcome to the discussion area!
...and an Imac with Airport Extreme on the third floor.
Which iMac do you have?
If the iMac has a "Core 2 Duo" processor it can connect to an 802.11n network.
If the iMac has a "Core Duo", G5, or G4 processor it can not connect to an 802.11n network.

Macbook and iPod Touch not picking up wireless signal

I have had some issues pertaining to the wireless internet in my house.
About a week and a half ago, I discovered that my iPod Touch and Macbook suddenly was not connecting to my wireless internet; I receive a message in the AirPort when trying to connect that states "Connection failed." I've tried several methods to resolving this issue, including simple things, but none have been successful. I have made no changes to any preferences, on my Macbook or the wireless internet, during the time it stopped connecting.
The strange thing that I discovered yesterday was that the wireless internet was working on my Wii.
Does anyone have any suggestions or ideas as to why I am unable to connect?
Thank you in advance.

Likely a loose antenna connection
Installing iPod Touch 4th Generation Wi-Fi Antenna - iFixit

Not picking up wifi signal on one of three Macs

We recently moved our computers, modem and airport to another room in our house. After the move one of our two desktop iMacs has been have trouble accessing the wi-fi. In order to get it to receive the wi-fi signal you must go to system preferences, network, assist me, then diagnostic. The network diagnostic box shows that the first three network status indicators, Airport, Airport Settings, and Network Settings all have green dots beside them. But the ISP, Internet, and Server are red. When you continue the three red ones then turn green and wifi access is restored but quite slow. The next time you return to the computer you have to go through the same process to access wifi. The airport signal strength bars are always full, so the computer is reading the wifi signal, just not able to access it. We have rebooted, changed the network name and password and other things as per our phone apple support session, and still it's not fixed. Interestingly, the other two computers in the house are not having any of these troubles. I'm wondering if something happened to the computer internally when it was carried, on it's side, from one room to the other. Any thoughts?

Is there anyone with any suggestions? PLEASE!

My ipone 4s is not picking up a signal from my Extreme when I go into another room in my hose

I'm not seeing my express show up on my 4s at all. The wifi on the phone shows a full signal if I'm in the same room as the express but the phone won't load a web page. When I walk out of the room I lose the signal. What's going on?

It is very possible that you may have some form of Wi-Fi interference in the the area that is preventing your 802.11n AirPort Extreme Base Station (AEBSn) from providing a clean RF signal to your iPhone.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

My airport card is not picking up a wireless signal?

Hi there,
I just bought an original Apple Airport card for my PowerMac G4 (mirrored doors)(1.25ghz). I installed a brand new D-Link wireless router w/ rangebooster on a PC located in the basement. The airport card is recognized by my mac, but it doesn't see any networks, even when I manually enter the name of the network I created when I installed the router to the PC. I'm wondering if it's not picking up a signal because the PC is located 2 floors below the mac. D-Link customer service say that shouldn't be the problem at all (with the model I have), and that it may be a problem with the installation/configuration of the AirPort card.
Is there a driver/update I should install along with the airport (original) card?
If anyone has any tips/knowledge on this matter, it would be greatly appreciated.
Thank You!

Hi-
You might take a look at the following help site:
http://www.macwireless.com/html/help/index.html
As Forrest mentioned, you may just have a location problem. If so, a booster may be your answer.
The following firmware may help:
http://www.apple.com/support/downloads/airportexpressfirmware611formacosx.html
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

TV isn't picking up VGA signal?

I just purchased a display port and i connected it to my tv.
How do I get it on my TV now?
Before on my PC i would just connct it ot my Samsung LCD and it would pick it up and I would change to PC from my HDMI source.
I guess my TV is not picking up the signal, what do i do?

SR7 wrote:
i clicked TUrn MIRROR on and it worked....it isn't the complete screen of my TV 46" but its about 2 inches short on each side.
is this the right way?
Yeah, that sounds about right.
Depending on the resolution of your TV v. Computer, the image will be changed a little on the TV (usually w/black bars on the side).
When I connect to a very old projector, I have a good deal of black bar on the sides b/c the resolution of the project cannot exactly mirror the 1280X1200 (i think) default resolution of the MB

EPrint does not work after new wifi router on Verizon DSL

I have been using ePrint on my iPod, iPad, and iPhone for a few months without a problem, but recently had to switch to a new wifi router on my Verizon DSL, as my wifi kept turning off and Verizon's solution was an updated wifi router. Since the switch, I cannot ePrint from my mobile devices. I can, after reconfiguration, print from my laptops. The ePrint app still finds the Deskjet 3050a, says "sending to printer", but will not print. The ePrint is turned on. I tried to delete the app and reinstall in hopes that I can start fresh, but it still does not work. I tried to add a new printer, with the email supplied on the ePrint screen on the printer, but nothing.
Any ideas?

Hi Honor Student
Is your printer connected to the new router as it sounds like it is still looking for the old one ? Maybe just disconnect it and reconnect it again to your new router and then the ePrint APP should pick it up.
I work for HP.
Thanks
Caroline
Although I am a HP employee, I am speaking for myself and not for HP.

New AC router, new MBair, not picking up AC signal?

Similar Messages

Maybe you are looking for