New Access Sequence for Tax based on material Group

Hello All,
Our requirement is that we tax our employees on apparel only if the value is greater than $50.00.
To achieve this, we created a new tax condition table (953 which is copied from 053) and assigned it to access 09 in the access sequence ZTX1 (created w/ref from TAXJ). We added material group (MATKL) to the condition table and selected exclusion indicator for the access.
We created the condition record in FV11.
When we created the sales order, the new access sequence (09) is not being accessed. It gives a message "Access not made (initialized field)" Message 102(VE).
Please advise if we are missing something.
Thanks,
Leela

Hi Leela,
Are you creating sales order in the same system like
You have created table in Development system in same system your are creating sales order
If you are creating here you just go to V/07 transaction then slect your access sequence go in to the tables detail screen here you select your table 953 then click on fields here you check all the fields are available correctly or not then save the changes.
Now try
or
You transported these confugaration to other system like Quality or Production here and you are creating the sales order,
If you are creating here you need to create condition table again then try.
I hope it will help you,
Regards,
Murali.

Similar Messages

  • Create New Access Sequence for Free Goods

    Hi Guru,
    please help me, I need to do a new Access Sequence for Free Goods, different from standard SAP. (Vendor/Material/Purch. organization)
    The new sequence of access for "Vendor/Plant/Material", I have already created, but at the time that the use in condition, being created PO not shoot the discount goods. (despite having loaded a record condition with MBN1)
    Please help me, to create a condition of discount goods that shots for "Vendor/Plant/Material".
    Tank you
    Miki

    Thank you for your interest,
    but unfortunately I have already made this assignment Field.
    Please help me, there must be a way to run the discount goods.
    Tank you
    Miki

  • New Access Sequence for Free Goods Determination

    Hi Guru's,
    I Have  a scenario wherein i have to maintain the free Goods Condition records in VBN1 with a new access sequence namely Customer/Distribution Channel/Plant/material.
    I have maintained all the necessary settings such as Free Goods Activation for Item Category, Assignment of free goods pricing procedure to my sales area,Positioning of R100 condition type in my pricing procedure with relevenat routines.
    At my Sale order level after maintaining the free goods condition record in VBN1 in new access sequence, my free goods determination is not happening and at the sme time if i maintain it in the standard access sequence i.e. in Sales Org/Dist.Channel/Customer/material the free goods are getting determined.
    Can anybody help me out in this..
    Regards
    Bhushan

    Hi
    There arew 2 things to be done or checked
    1. Position your access sequence before the standard one by giving step nos accordingly
    2.In the existing sequence check for the exclusive indicator in the standard sequence and i think that is ticked in your case
    Hence after getting the condition record in the standard sequence the system stops searching for the new records in your new access sequence
    If that is the casethen remove exclusive indicator from the standard one and tick the same in your new access sequence
    By this you can get the condition records of your new access sequence without positioning
    Pls reply whether mu suggestion has helped you
    Raja

  • Access Sequence for Plant/Tax code Combination  for JTAX

    Dear All
    i want to create a new access sequence for "Plant/Tax code" Combination.
    Please let me know the process for the same
    Regards
    Amey

    Hi,
    Goto- M/05.
    Create the condition table by selecting the fields Plant & Tax code.
    Assign this condition table in the Access sequence JTAX as per ur requirement.
    Create condition records (FV11) by choosing the requirec access sequence.
    Regards,
    Satpal

  • Error with Material type/Tax code access sequence in Tax procedure

    Hi,
    I am trying to create an access sequence with Material type/tax code combination for my tax procedure. While I can generate the condition table successfully, I cannot create an access sequence. The access sequence gives me the pop up message " select a document field for MTART". I searched in the field catalog and its absent. However MTART exists in the table KOMG.
    How can I include the field MTART ( material type) in the field catalog. The tax code field is shown as green. Please help.
    Thanks and regards,
    Soumya.

    The field MTART was included as standard in the table . I didn't have to add anything. Further, i couldn't find any standard access sequence for tax procedures that include material type.
    I am really stuck with this!!
    Regards,
    Soumya

  • How to create the Access sequence for the Vendor+material+plant combination

    Hi all
    Please let me know How to create the Access sequence for the Vendormaterialplant combination..
    Whats the use? What its effect in purhcase and taxe..
    brief me please

    Hi,
    you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
    goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
    find the tax condition type. see in it which access sequence is attached.
    if there is none then use JTAX used for taxes in India.
    or you can create the similar one for your.
    to create the same goto OBQ2.
    new entry or copy JTAX.
    and assign the access sequence to condition type.
    this will resolve your problem if you just need to assign the access sequence.
    regards,
    Adwait Bachuwar

  • New Access Sequence

    Dear Team,
    I have created New Access Sequence ZJTX copy of JTAX. As below
    1. Query-1
    No.               table               Description                             
    10     363     Plant/Vendor/Material
    20     900     Plant/Tax Code
    30     910     Plant/Vendor/Matl Group
    50     930     Plant/Vendor
    Having exclusive indicator to 10, 20 & 30.
    But when I maintain condition in FV11 like JVRD & create Purchase order. It DOES NOT show me taxes.
    2. Query-2
    I am not able to Create combination Plant/vendor/country/region. For Region Doc field is Empty. Status Indicator is Red.
    Pls suggest
    Thanks
    Tushar

    Dear TEam,
    I have created new Condition Table 960: tax code/plant/vendor/mateiral
    1. When I maintain any table created by me in Access Sequence ZJTX, warning message comes
    The field assignment has not yet been made
    Message no. VK376
    Diagnosis
    Field assignment has not yet been carried out.
    System Response
    When using this access sequence, the system can never find a record for this access (sequential number 04 table 960)
    Procedure
    Branch to field level and make the field assignment.
    Pls suggest urgently whats wrong
    Regards

  • Create a new condition type for tax... and assign in the Tax determniation

    Hi,
    I need to add custom condition tax type, i tried creating the condition in OBQ1 and add that condtion in FI pricing OBQ3, now I want to confirm what is basic conept means whenever we create on condtion in OQB1 and add in OBQ3.
    i need to add that in Sales order and need to maunally populate that in the sales order.
    could anybody suggest to create a new condition type for tax.(full process).
    Thanks
    shankar

    Hi,
    Goto the T.Code "V/06".Create one new "Z" condition type.
    Maintain the Condition Class as "D(Taxes)".
    Calculation type as "A(percentage)".
    Cond. Category as "D(Tax)".
    Select the tick mark for "Group Condition" if it is applicable for you.
    In the next step assign this condition type to your pricing procedure by using the T.Code "V/08".
    Also maintain access sequence by using the T.Code "V/07" and assign it to your Condition type.
    Now this condition type will appeared in your sales order after maintain teh condition records.
    Regards,
    Krishna.

  • Help required with Access Sequence for output of Delivery

    Hi
    I have created new conditon table for shipping point and storage location
    Created new access sequence , with this new condition table as the 1st sequence - the others being Sales org/ Customer and then Shipping point.
    Applied this Access sequence to Output type
    I created condition record against 1st access sequence, Shipping point and storage location
    Yet when I created Stock Transport Order and subsequent delivery for this STO.
    The first access sequence against Shipping point and Storage location was not found
    The fields used against shipping point and storage location in my access sequence are as follows:-
    VSTEL     KOMKBV2    VSTEL
    LGORT    KOMPBV2    LGORT
    I also tried with a condition for shipping point and material , but this was not found either
    Any ideas ?
    Please advise
    Many thanks
    Tony

    HI
    checked the config and the delivery type is assigned to output determination procedure for shipping output.
    we have two outputs for deliveries, one for delivery schedule note and the other for despatch note, once PGI has been done.
    Delivery schedule note is first in the determination procedure so delivery type NL replenishment delivery is assigned to the first output in this procedure
    is something amiss here ??
    Thanks
    Tony

  • Step to create new access sequence

    Hi SAP gurus,
    Can anyone teach me how to create new access sequence?
    I am zero knowledge on this. Need help from A to Z.
    I only know how to maintain the pricing VK11.
    If the info already discuss before, kindly need ur kindness to link it for me...

    Hi you can define access seq. in T-code v/07
    You can define prices, discounts, and surcharges at various levels. Each level
    is defined by a condition table. An access sequence consists of one or more
    condition tables. The order of the entries in an access sequence defines the
    hierarchy of the various levels. The system determines the condition records
    in the sequence specified.
    Within each access of an access sequence, you can specify the document field
    or source field with which an access is performed. You can make access
    dependent  on requirement to avoid unnecessary access, thus reducing the
    system load.
    For better understanding go through pricing procedure.
    Reg pricing procedure.
    1. Use transaction code v/07 to create a access sequence and assign tables based on which you want to carry on 
        pricing as accesses.
    2. Use transaction code v/06 to define condition type. It can be for base price, discount, freight etc.,
        (Do assign relevant access sequence)
    3. Use transaction code v/08 to define pricing procedure.
    4. Assign this to your relevant sales area+ dpp+cupp.
    I hink it will help u.
    Best Regards
    Sainath

  • Access sequence for stock transfer order

    Hi,
    My client is a paper industry. client is procuring raw materials from forest center. We are considering forest center as plant 1800 and paper mill as plant 1100. several depots has been created under forest center and considering them as storage location. goods receipt at forest center is happening through scheduling agreements. stock is transfered from forest center depots to mill through stock transport order.
    For each depots, freight value per MT is fixed for transporting goods from forest center to mill. Clients requirement is to maintain the rates for freight for each depots so that it will pick from condition records. No need to enter freight value in stock transport order.
    I have created an access sequence for combination of plant (1800) and forest center depots and maintained condition table. but it is not working as in stock transport order, there is no storage location option for supplying plant. In stock transport order supplying plant is forest center (1800) and receiving plant is mill (1100).
    Please guide me where to maintain the freight rate as this is mandatory for my client.
    Thanks
    Prasant

    Access seq with depot will not work becuse you don't have the storage location field in the header
    Rather create the diff pruchase group for each depot and assign them in STO based on your depot(storage location)
    and create the access sequence based on the palnt and purchase group than it will work.

  • Access Sequence for PO output

    Hi experts,
    I have defined new PO output type in NACE by copying existing one.
    I have created New Condition Table for PO output (in SPRO).
    Now, i want to create new access sequence. But, i am facing following problems
    1. If i try to create new access sequence by copying existing one , i am not able to add Newly defined condition table.
    2.       if i try to create new access sequence without copying existing one , i am not able to enter access i.e.   10 ,20 , 30, 40 .... for  access sequence.
    Also , how to link this new access sequence to newly defined Condition table?
    Please, guide me to resolve it
    Regards,
    rahul
    Edited by: RahulNsk on May 9, 2009 9:34 AM

    David,
    I can't answer your question directly but I can propose an alternative:
    If you are looking for another field to trigger output determination, you may want to consider having an ABAP developer create a custom requirement for that output type. Requirements can make simple validation checks and if it passes (sysubrc = 0) then the output is proposed, if not, then output is not proposed.
    Create requirement @ Materials Management > Purchasing > Messages > Output Control > Maintain Requirements for Message Control
    Assign requirement to output type @ Materials Management > Purchasing > Messages > Output Control > Message Determination Schemas > Define Message Schema for Purchase Order.
    I hope this helps

  • Help required with Access Sequence for 'Delivery output' of Scheduling note

    Dear Gurus
    I need help with creation of an Access Sequence.
    I have created an access sequence for sales org and customer, where the communication is emailed or faxed to the CR party- Forwarding agent.
    BUT - some customers have more than 1 forwarding agent in their masterdata, and not all forwarding agents are wanting to receive fax/email, so if a condition record exists it will always try to send via the method set up against the customer.
    I need to create an access sequence which looks at the customer/ Forwarding agent combination, - I have created new condition tables and Access sequences to include Vendor, - but when i create delivery notes, - this is not working, - it is not recognising the access sequence at all, the vendor party/haulier is not being recognised at all- I keep getting access not made, Initialised field'     
    Please advise how i can get the customer/Forwarding agent scenario to work
    Many thanks
    Tony

    Hi Tony,
    The field SPDNR can not be entered directly in the feild catalog list.
    First it has to be included in the list through inculde or user exit......
    SPRO->Sales and Distribution>System Modifications->Create New Fields (Using Condition Technique)-->New Fields For Output Control---> Use INCLUDE for new fields in Dictionary (messages) or Use user exit for new fields (messages)  
    You ask your ABAP consultant to do this then it will be available in the field catalog list then u can select in the condition table then into access sequence and so on...
    Kindly Reward points if usefull.
    Regards
    vK

  • Define access sequence for purchase order

    Hi,
    Please can I get some advice on how to create an access sequence in MM (in IMG = define access sequence for purchase order)
    I have created a condition type for handling costs and want to assign a default value for each individual goods supplier.
    So for plant 1000 and goods supplier 40, assign a rate of 3% to the condition. For plant 1000 and goods supplier 50, assign a rate of 7% etc etc
    How do I go about doing this please
    Thank you

    hi,
    Steps,
    Customizing activities:
    1) Create the condition table for vendor and plant field.
    table no should be above 500 as its a customizing.
    2) create access sequence and assign the condition table to this access sequence.And activate the fields in table.
    3) create Z condition type and put this access sequence into the condition type.
    End user activities:
    4) maitain the condition record based on vendor and plant in MEK1 transaction
    regards,
    sujit

  • Why we cant have access sequence for header condition ?

    hi ,
    i have one query in pricing.
    Can we assign access sequence for header condition ? if yes how ?
    if not why ? please explain

    Hi there,
    It is always possible to have work around to solve issue without refer to OSS to change any programming coding.
    We want to have a freight charge appear on each sales order automatically according to some condition. Most of the time, this freight charge is a flat rate (if it is depend on qty or value, then we're so easy to set it in item level).
    In order to do so, we'll have one assumption. The item line number of sales order is auto running number, like 10, 20 and etc created by system and not manually input.
    Then we create a pricing condition type like other discount or charge in ITEM LEVEL with your selected condition like customer, sales office, country and etc. However, remember to add the sales item line as part of the condition of this pricing condition.
    Update the pricing procedure and create price condition record with say "10" for the sales item line. Since you'll have line number 10 for all sales order as first line (no mater it is a free of charge item or not). This new condition will generate a "freight cost" in the pricing procedure. And it is only apply to first line, therefore, we only get once of this charge for one order.
    Hope this is your case and it works with ours.
    Michael

Maybe you are looking for