New Acer Aspire v17 Black Edition GTX 960m Overheating Problems?

I just bought and received Acer Aspire v17 Black Edition and started playing some games on it.I always check the bottom of the laptop once in a while with my hand to make sure it isn't overheating.When I checked after some gaming today, the surface was extremely hot so I downloaded the Core Temp software to check what the exact temperatures were. I found out that the temperature of all 4 cores ranged from 85 Degrees to 95 degrees celsius when gaming. I've done some research online and was informed that temperature at this range have the risk of causing internal damage. CoolBoost is on, Active cooling is on. Core Temp might be displaying the wrong temperature anways. Is this normal or abnormal?

I have to agree with Pocopony22.  I think the main issue in cooling effectiveness here is the form factor of the case.  Being so thin I imagine there isn't much space to allow cooler ambient air to convey the heat out of the system.  Although I often wonder why manufacturers don't utilize some dynamics like air multiplication and a "jet" engine effect to use the thinness to create a more forceful air flow... I'm sure there is some reason I am not thinking of since I do not design notebooks for a living. LOL.  Anyhow based the data sheets for the 4720hq, the safe max operating temp is 100C and while the 960M is not listed in data sheets I suspect it could handle 90/95C safely.  While I personally do not condone such temperatures nor would I settle for those, in theory the processors are safe, the only thing I question is the boards and other components near these since everything is so tight.   In the end would I run my CPU at 100C for 4 or 5 hours?  No way, I would do like blackice55, throttle the CPU myself (since that way I can adjust my efforts based on a controlled throttling, rather than having to adjust on the fly if the CPU throttles on it's own) and keep the temps down a bit. Follow these simple guidelines to extend the longevity of your device: Play in area with cool ambient temps, not outside on a summer day.Use a cooler unit. Find one with fans that you can adjust the airflow (if you use your cooler on more than one device) or buy with an appropriate air flow direction based on the system cooling flow.Utilize CPU throttling in a controlled manner.Give your computer a rest once every few hours.  Let the CPU idle and cool before shutting off.  It doesn't take long with the fans running, but can remain hot significantly longer if shut down immediately.BUY ADH warranty.  Spend a few hundred bucks now so you don't have to spend another 1-2k later...Device dies from not following 1-5, always have a contingency plan. Regards,-Eli Note: Edited safe temp for GTX-960M since it's temps are not listed in the data sheets.

Similar Messages

  • Acer Aspire V17 Nitro Black Number Lock

    I know this has been asked before but the answers given have not worked.1.  Edit the registery.2.  Disable fast startup.I have an Acer Aspire V17 Nitro Black (VN7-791G) with Windows 8.1.  I want Num Lock on always.  When I boot the machine in the morning it is off.  When I wake the machine after a period of inactivity it is off.  I have edited the registry under the keyboard settings per other replys in these forums with no change.  I have disabled fast startup per replys in these forums again with no change.  I contacted Microsux because I think it is a windows issue but they said to contact Acer.  Acer chat is of no use they want you to pay them to modify the registry.  So here I and I believe others are stuck with a machine that does its own thing.

    I'm having the same issue. Changing the registry values fixes the num-lock status at startup, but makes no difference when the computer goes to sleep. As soon as it goes to sleep, num lock is turned off. Microsoft support says "Check with your System/Mortherboard Maker's Support, their on-line documentation, and ask
    in their forums.
    Some makers will have settings in the BIOS, others will provide utilities to do it, and others may
    have methods in place which prevent doing it in Windows." Is there any such utility/setting that can fix this issue?It is my only complaint about this laptop.

  • RAM and SSD for my new Acer Aspire R7 752-5893

    You will need RAM in the 204-pin SO-DIMM format for your laptop. DDR3-1600 (also known as PC3-12800) should work a treat. Your SSD should have a MSATA interface, so depending on what is in there at the moment, you could put in a Plextor M6M disk. There are some hidden screws on the R7 chassis - you can take a look here and see how to open it, and then you'll know what drives and RAM slots you have available.

    Thank you, JimIt's quite commendable your concern for others in the Acer community and for replying so quickly and accurately. It's my first Acer as I still have two Lenovos (x200t and x220t) which I use connected to a 19 in tablet/monitor. I was attracted to Acer R7's large screen as it will enable me to  work outside my studio, even if it just means in my livingroom.  I am a professional illustrator and rely heavily on these machines. Anyway, thank you for your input. I wondered whether the Plextor M6M was recommended considering that the M5M is harder to find and your answer was right on.Wish you the very best,SDrum

  • Acer Aspire One, modules load failed and autologin problem

    Hi,
    I am having problem with modules loading. I haven't updated my netbook for a month or so (my motherboard was broken and it took me that long to finally repair it). After updating, which took ages and the installation size was about 2,2 GBs I have come across two problems.
    First one is modules loading being failed. On boot, everything is said to be DONE in green but with modules I get red FAIL. I am not an advanced user, so I don't really know what to paste, so I'll paste errors.log
    Oct 20 20:18:26 localhost kernel: [ 0.217828] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    Oct 20 20:18:26 localhost kernel: [ 0.217907] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
    Oct 20 20:18:36 localhost kernel: [ 18.740305] pciehp 0000:00:1c.1:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.740321] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:02:00
    Oct 20 20:18:36 localhost kernel: [ 18.849318] pciehp 0000:00:1c.2:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.849332] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:03:00
    Oct 20 20:18:36 localhost kernel: [ 18.956303] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.956318] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00
    Oct 20 20:18:37 localhost dhcpcd[3196]: dhcpcd not running
    Oct 20 20:18:38 localhost dhcpcd[3202]: dhcpcd not running
    Oct 20 20:18:38 localhost dhcpcd[3209]: dhcpcd not running
    Another problem is with SLiM, or at least logging. I have my /home partition on my SD card. From time to time when I turn my computer on, I am being logged as root, not as my user. When I logout and login again, everything is fine. My slim.log
    /usr/bin/xauth: file /var/run/slim.auth does not exist
    slim: waiting for X server to begin accepting connections
    X.Org X Server 1.10.4
    Release Date: 2011-08-19
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.0-ARCH i686
    Current Operating System: Linux archone 2.6.34-netbook #3 SMP Sat Jul 17 19:18:04 UTC 2010 i686
    Kernel command line: root=/dev/sda1 ro rootfstype=ext4 checkdisk quiet
    Build Date: 17 September 2011 07:40:13AM
    Current version of pixman: 0.22.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 20 20:18:25 2011
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (EE) Logitech USB Receiver: failed to initialize for relative axes.
    /usr/bin/xauth: file /home/archone/.Xauthority does not exist
    which: no hsetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
    which: no esetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    tint2 : nb monitor 1, nb monitor used 1, nb desktop 1
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-X-utilities.c:cairo_dock_support_X_extension:581) [0m
    The dock was not compiled with the X extensions (XComposite, xinerama, xtst, XDamage, etc).
    ** (gsynaptics-init:3145): WARNING **: Using synclient
    ERROR: openbox-xdg-autostart requires PyXDG to be installed
    ============================================================================
    Cairo-Dock version: 2.3.0~2
    Compiled date: May 9 2011 21:48:33
    Running with OpenGL: 0
    ============================================================================
    tint2 : pixmap background detection failed
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-module-manager.c:cairo_dock_load_module:167) [0m
    while opening module '/usr/lib/cairo-dock/libcd-weblets.so' : (libwebkitgtk-1.0.so.0: cannot open shared object file: No such file or directory)
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-applications-manager.c:get_config:1485) [0m
    Sorry but either your X server does not have the XComposite extension, or your version of Cairo-Dock was not built with the support of XComposite.
    You can't have window thumbnails in the dock
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:699) [0m
    while listing user packages in '/home/archone/.config/cairo-dock/third-party' : Error opening directory '/home/archone/.config/cairo-dock/third-party': No such file or directory
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_get_url_data_with_post:327) [0m
    an error occured while downloading 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0/list.conf' : Couldn't resolve host name
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_net_packages:646) [0m
    empty packages list on http://download.tuxfamily.org/glxdock/themes (check that your connection is alive, or retry later)
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:710) [0m
    while listing distant packages in 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0' : empty packages list on http://download.tuxfamily.org/glxdock/themes
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 776
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 777
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 778
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 1973
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 1974
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 1975
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 7574
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 7575
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 7576
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 9114
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 9115
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 9116
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 17878
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 17879
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 17880
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 23238
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 23239
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 23240
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 84117
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 84118
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 84119
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 86307
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 86308
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 86309
    Months ago I have had problem with my SD card and did what it was said in this topic https://bbs.archlinux.org/viewtopic.php?id=115386. I don't know if it makes any difference, but it is worth saying. The problem from that topic still exists, when I put my /home into fstab, I am still getting error, that's why I have my mount in rc.local.

    Hi,
    I am having problem with modules loading. I haven't updated my netbook for a month or so (my motherboard was broken and it took me that long to finally repair it). After updating, which took ages and the installation size was about 2,2 GBs I have come across two problems.
    First one is modules loading being failed. On boot, everything is said to be DONE in green but with modules I get red FAIL. I am not an advanced user, so I don't really know what to paste, so I'll paste errors.log
    Oct 20 20:18:26 localhost kernel: [ 0.217828] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    Oct 20 20:18:26 localhost kernel: [ 0.217907] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
    Oct 20 20:18:36 localhost kernel: [ 18.740305] pciehp 0000:00:1c.1:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.740321] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:02:00
    Oct 20 20:18:36 localhost kernel: [ 18.849318] pciehp 0000:00:1c.2:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.849332] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:03:00
    Oct 20 20:18:36 localhost kernel: [ 18.956303] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.956318] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00
    Oct 20 20:18:37 localhost dhcpcd[3196]: dhcpcd not running
    Oct 20 20:18:38 localhost dhcpcd[3202]: dhcpcd not running
    Oct 20 20:18:38 localhost dhcpcd[3209]: dhcpcd not running
    Another problem is with SLiM, or at least logging. I have my /home partition on my SD card. From time to time when I turn my computer on, I am being logged as root, not as my user. When I logout and login again, everything is fine. My slim.log
    /usr/bin/xauth: file /var/run/slim.auth does not exist
    slim: waiting for X server to begin accepting connections
    X.Org X Server 1.10.4
    Release Date: 2011-08-19
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.0-ARCH i686
    Current Operating System: Linux archone 2.6.34-netbook #3 SMP Sat Jul 17 19:18:04 UTC 2010 i686
    Kernel command line: root=/dev/sda1 ro rootfstype=ext4 checkdisk quiet
    Build Date: 17 September 2011 07:40:13AM
    Current version of pixman: 0.22.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 20 20:18:25 2011
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (EE) Logitech USB Receiver: failed to initialize for relative axes.
    /usr/bin/xauth: file /home/archone/.Xauthority does not exist
    which: no hsetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
    which: no esetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    tint2 : nb monitor 1, nb monitor used 1, nb desktop 1
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-X-utilities.c:cairo_dock_support_X_extension:581) [0m
    The dock was not compiled with the X extensions (XComposite, xinerama, xtst, XDamage, etc).
    ** (gsynaptics-init:3145): WARNING **: Using synclient
    ERROR: openbox-xdg-autostart requires PyXDG to be installed
    ============================================================================
    Cairo-Dock version: 2.3.0~2
    Compiled date: May 9 2011 21:48:33
    Running with OpenGL: 0
    ============================================================================
    tint2 : pixmap background detection failed
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-module-manager.c:cairo_dock_load_module:167) [0m
    while opening module '/usr/lib/cairo-dock/libcd-weblets.so' : (libwebkitgtk-1.0.so.0: cannot open shared object file: No such file or directory)
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-applications-manager.c:get_config:1485) [0m
    Sorry but either your X server does not have the XComposite extension, or your version of Cairo-Dock was not built with the support of XComposite.
    You can't have window thumbnails in the dock
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:699) [0m
    while listing user packages in '/home/archone/.config/cairo-dock/third-party' : Error opening directory '/home/archone/.config/cairo-dock/third-party': No such file or directory
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_get_url_data_with_post:327) [0m
    an error occured while downloading 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0/list.conf' : Couldn't resolve host name
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_net_packages:646) [0m
    empty packages list on http://download.tuxfamily.org/glxdock/themes (check that your connection is alive, or retry later)
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:710) [0m
    while listing distant packages in 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0' : empty packages list on http://download.tuxfamily.org/glxdock/themes
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 776
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 777
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 778
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 1973
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 1974
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 1975
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 7574
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 7575
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 7576
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 9114
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 9115
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 9116
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 17878
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 17879
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 17880
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 23238
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 23239
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 23240
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 84117
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 84118
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 84119
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 86307
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 86308
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 86309
    Months ago I have had problem with my SD card and did what it was said in this topic https://bbs.archlinux.org/viewtopic.php?id=115386. I don't know if it makes any difference, but it is worth saying. The problem from that topic still exists, when I put my /home into fstab, I am still getting error, that's why I have my mount in rc.local.

  • I cannot get my Canon MX410 to work with my new computer. Computer is Acer Aspire One.

    Cannot get my Canon MX410 to connect with my new Acer Aspire One. 

    Hello.
    Please download the latest Windows 8 drivers from our website.  You can visit the following link to download the drivers:
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx410#Dr...
    If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • ACER ASPIRE ES1-511-C83X WINDOWS 7 INSTALLATION

    For the last couple of days I've been trying to install Windows 7 64-bit on my new ACER Aspire E15 [es1-511-c83x] that came with Windows 8.1  preinstalled. It  supports UEFI and LEGACY boot options settings in BIOS utility.   When I try to boot it from the Win 7 DVD it’s hanging on “Starting Windows”  logo screen after the files are loaded and the system is halted.I tried to run it in “Safe mode with Command prompt” and it stops at:
    Loading Windows Files:
    Loaded: ...\system32\drivers\disk.sys
    When I start the installation from Win 8.1 interface and choose disk partition that was created with Win 8.1 I’m getting this message:
    “The partitions on the disk selected for installation are not in recommended order. For additional information about installing to GPT disks go to the Microsoft website and search for GPT. Do you want to proceed with installation?”
    If I go ahead it’s hanging again on “Loaded: ...\system32\drivers\disk.sys” after the system is rebooted.
    I want to install windows 7 along with my Win8.1 with UEFI and GPT. I thing from windows 7, these configuration will work.
    Do I have any other options?

    http://www.sevenforums.com/installation-setup/360135-win-7-install-uefi-gpt.html#post2997467

  • Hp2311x higher resolution with Acer Aspire TC-105

    Hello
    I have a new Acer Aspire TC-105 purchased, now do the following problem that my screen resolution can not be higher than 1366 x 768. In my previous PC had to choose. No problem for higher resolution
    I have the latest drivers geeinstalleerd, I get the message C: \ Monitors \ HP_2311_3.0 \ HPX64DRIVE.EXE access denied
    I press ok
    He just goes to the HP installer I press following normal message, click finish then nothing happens with my display adapters. The only thing I see is the Compaq W185q Wide LCD Monitor that's not him, and I can not select him for another montitor the HP2311x
    Higher resolution will be nice.
    What am I doing wrong
    Goos Mante

    Since you are reverting the patch, you need to indicate that the patch should be reversed on the command line. So if you saved the patch from git as constrain-cursor-harder.patch, for instance, you would need to modify the PKGBUILD so that:
    constrain-cursor-harder.patch is in the source array
    The patch's md5sum is in the md5sums array
    The patch command line specifies that it's a reverse patch (the -R is important):
    patch -RNp1 -i "${srcdir}/constrain-cursor-harder.patch"
    Unfortunately, the patch from git no longer reverses cleanly against xorg-server 1.11.4.
    I've made an updated version of the patch that should apply cleanly, without a need to be reversed, here: http://moe.isisview.org/patches/xorg-se … rder.patch

  • How to Install Windows 7 Home Premium (32bit) with No legacy option in BIOS setting. Just UEFI. in Acer Aspire E1-410 ?

    I just broke my older Acer Aspire 4752G.
    I just backup entire Partition my Windows 7 Home Premium (32bit) with Acronis True Image Home 2014 BootCD Premium.
    intend to restore in this brand new Acer Aspire E1-410.
    Acer Aspire E1-410 don't have Legacy Option only UEFI
    Acronis True Image Home 2014 BootCD Premium fully support EUFI but alas my Original Windows don't boot
    So I intend to use repair BootRec command prompt
    These CD Windows won't detect in these Acer
    So I call Acer Technical Support They said :
    there is NO OTHER WAY to change this UEFI to LEGACY MODE (Build-in Bios mode CANNOT change other than UEFI)
    you must install via DVD who FULLY SUPPORT UEFI -> Windows 8 or Windows 8.1 (ONLY in x64bit mode).
    I hope you can resolve these for me.
    Thank you.

    It is possible to install Windows 7 Home Premium 32-bit from DVD to a UEFI based hardware, but must be done using an answer file. It may or may not work if you are using a recovery DVD. Either way, the OS is not supported on that hardware.
    Windows 8 32bit is supported on UEFI hardware.
    The problem with Win7 32bit on UEFI is a problem in the bootloader. The OS cannot boot because the bootloader cannot find the OS. I had suspected it may be possible to get the OS to boot by using BCDBoot, but since it isn't supported I have not put in any
    effort to determine the method of doing it.

  • Acer Aspire Switch 10 e keyboard dock problem

    Hi. I have this brand new Acer Aspire Switch 10 E which I just bought last month. I'm now having problems with the keyboard and the dock as when I connect the tablet/screen to the dock, the keyboard is not detected. It recognizeswhen I dock the tablet but it doesn't detect te hard drive nor the keyboard. Sometime, after a long while, it detects the keyboard and the hard drive but only for a few seconds then it disappears again. Other times, it just flips continually from working and then not working. The problem is so sudden. I would jokingly note that whenever I search for solutions to the keyboard problem, it very briefly fixes itself. On a serious note however, I do not know what causes this malfunction nor do I know what fixes it. As stated above, the problem is so sudden. I have been very, very careful with the use of my laptop including in the removal and docking of the tablet. I have inspected the docking pins, and physically, they look perfectly fine. The problem occurs even the tablet has been connected and left undisturbed for continuous periods of time. This has led me to believe that the problem could be software based and not hardware. I am also open to the possibility that it could be heat affecting the docking pins (heat can cause connection issues and this isn't the first time I have encountered one, nor the second) but like I said, the docking pins work perfectly and remain constantly in contact witch each other. As I have postulated that the problem is software based, I have gone through the hassles of searching for possibble drivers for the dock/keyboard. Unfortunately, (this might be due to the Aspire Switch 10 E being a fairly new model) there were no keyboard drivers on the Acer support page for the Aspire Switch 10 E. In my search, I encountered a video for the Aspire Switch 10 keyboard to fix the problem, a driver update for the Switch 10, NOT the Switch 10 E. I have tried the solution and it still does not work. I am not a fan of forums and if I am, I am usually just a reader kind of person. But in the light of recent events and the fact that there are virtually NO questions or posts about this brand new model of laptop, specfically the Aspire Switch 10 E, I have taken the responsibility of raising this question in the hopes that a knowledgeable person may provide assistance and that the others of my kind (the Aspire Switch 10 E users) may be enlightened as well. I would sincerely appreciate the assistance. God bless. TL;DR: Aspire Switch 10 E detects docking but keyboard and hard drive are inconsistently not working. Help. Reposted this topic on the laptops forum because I realized I posted the first one in desktops.

    Hi, I have a similar problem.  Sometimes after waking or after removing or reataching the keyboard it becomes unresponsive.  But if I then restart the computer it is fine.  I think, in my case at least, it can not be due to just a bad connection, as otherwise restarting it would not change anything.  Also, I don't think it is something that has been fixed as it is quite a recent purchase and I have recently updated windows and drivers.  The whole reason for choosing this pc was the ease with which it converts between tablet and laptop mode so any advice would be very welcome. Thanks,Tom

  • Acer Aspire Switch 12 noisy LCD backlight?

    Greetings, Got my brand new Acer Aspire Switch 12 the other day. I'm very satisifed with the form factor and with the device in general. Except for one thing. There is audible amount of noise coming from my unit when the backlight is set between 0% and 100%. The noise seems to emanate just under the "Acer" logo. This noise goes away when i set the backlight to 0% or to 100%. And it seems to be the loudest if i set the backlight to about 50% It is not very obvious but i can definitely hear it in a quiet room. Kind of defeates the whole point of a fanless design if you ask me. I think the noise is coming from the capacitors or coils in the backlight regulator circutry. I would like to know if this is a general problem with this model or is this just a problem with my unit. Fellow Aspire Switch 12 owners, do you have the same issue with your unit? Acer admins, is this a known problem with this model? I have to know, i have to decide whether i'm going to replace the unit, return the unit or just stick with it. I bought it from amazon.es.Part number of my unit: NT.L7FEB.004

    mkatic,
    I do not see anything in the documentation that talks about that issue, you can contact Acer technical support in your area to see what your options are, or you can seek them through Amazon; I believe that this might be their return policy if it helps steer you in the right direction.

  • Acer Aspire E5-473-35TX or Acer Aspire V15 Nitro Black Edition VN7-571G-73ZJ ?

    Hi! I'm planning to buy a new laptop, i already browse some online store and found thishttp://www.lazada.com.ph/acer-aspire-switch-10-e-sw3-013-10w8-64gb-intel-101-2-in-1-touchscreen-laptop-shark-gray-534535.html 
    and 
    http://www.lazada.com.ph/acer-aspire-e5-473-35tx-4gb-intel-core-i3-4005u-14-laptop-with-free-acer-laptop-bag-and-smart-bro-4g-pocket-wi-fi-527127.html, just want to ask which one is a good catch? Any thoughts will be much appreciated. Thanks!

    Boy, those are two very different machines! The first one is very handy if you are carrying the laptop with you most of the time, especially if you are switching between carrying it, using it as a laptop and using it as a tablet fairly often. The detriment is that the screen is small, only 10 inch. The second one is a lot more powerful and larger, but it will be more of a hassle to carry (you will want a backpack or briefcase). It's better suited if you are traveling between locations and want to set it up for extended use at each destination. You are going to be less likely to want to pull it out for ten minutes of quick web surfing.

  • Acer Aspire m3985 new GPU cant boot, MBO see only half RAM memory

    Hi i have a lot of problems with Acer aspire m3985.Default PS is 300w, i upgrade it to coolermaster 500wi put new GPU povercolor r7 260x 1GB ddr5 128 bit, but cant boot pc (black screen and not hear beep from motherboard)i put another GPU ATi 5700 (same spec like prev. GPU) and system boot normal, i hear 1 beep, and work fine...I put again new GPU r7 260x, but again cant boot (gpu is new and work on another PC i tested it)so i try CLEAR CMOS, i finish thatr7 260x card dont boot again, i put ati again, and make date and time in BIOS, but i see another problem now:i have 16 GB paired kingston memory on computer but in BIOS see 8GB ???? (before reset CMOS is 16 GB)I test all memory modules one by one, i tested any slot one by one and all work, but when i put all 4 modules, bios and windows see only half 8gb see from 16 gb installed memory...In program CPUz , write 16 GB ram, and 4 modules installed, with serial numbers on modules, but in bios and windows see only 8 GB of ram...I reinstall system 3 times, windows 7 - nothing getinstall windows 8.1 - nothing getIn wondows 8.1 i upgrade BIOS from site p01.a1 to p01-a2 because last bios cant upgrade i got error message"ROM file size does not match existing BIOS size"I try upgrade UEFI firmware, i read manual on this forum, i work all step by step, and in my windows DONT HAVE OPTION UEFI firmware???also i try windows 10, all same nothing fixed, memory 8 gb, r7 GPU dont work...I remove battery from MB for 10 hours to empty electrolits, but again nothing get...On motherboard next JUMPER near CMOS is BIOS WP jumper (i read on forum this jumper is BIOS write protect jumper) i dont touch this jumper, because i dont know for what is use... (i think i need put in ON bios wp jumper and then upgrade bios, but i first ask what to doo and i hope i get anwser)...Please help me

    1. In BIOS have 16 gb ram, windows see 16 gb ram, motherboard name acer m3985 in bios and windows, GPU r7 260x dont boot PC2. I reset CMOS, BIOS see 8 gb ram, windows see 8 gb ram, CPUz and hwinfo see 16 gb ram, GPU r7 260x dont boot again, motherboard name in bios and windows is changed to acer m1935.3. I download last version bios p11.b1 from site, windows flash faild ROM size doesnt match bios size4. i donwload bios p11.a2 from acer site, windows flash, load default settings in bios, bios version p01.a2 write in bios page, motherboar name is m1935 (my pc is m3985), GPU r7 260x cant boot, 8 gb ram see in bios and windows...5. i try install windows in UEFI mode, format SSD to GPT format (someone told me that is wrong need make bootabile USB with windows because CD-DVD rom is not UEFI- in bios i see boot name : UEFI CD DVD drive and i boot from them, boot in windows 8.1 options option in settings UEFI firmware dont exist...6. can someone give me step by step manual how to flash bios in DOS mode, i have USB flash, and i format it in bootabile mode, and wish bios i put on usb last one UEFI (non working) or p01-a2???12 days i cant use PC because i cant solve this problems

  • New Printer HP2540/301 Acer Aspire 1 laptop has no disk drive and an idiot user. PLEASE HELP....

    I bought myself a nice new 5240 all in one 301 printer on Wednesday.
    Since then i have done nothing but fight with it ever since.
    My laptop is an Acer Aspire one, one of the smaller ones, which unfortunately doesnt have a disk drive in it. My first thought went to downloading drivers. The web page didnt work and i realised then, that without the user manual (which i suspect is on the disk) i am totally lost.
    So could someone please help me.
    I have done a print out, which says.
    Check your HP printer network name (SSID) matches your wireless router network name (SSID) exactly.
    If they do not match exactly, run the wireless set up from the printer software to configure your HP printer.
    I am assuming this is the software on the disk. Is there a way of downloading the software from online?
    Any help would be gratefully accepted as i have no clue what i am doing atm. I am only just starting to learn how to use Windows 8 properly atm, up until now my whole computer skills hass been how to open a browser and office.
    Thank you.i should also add, i have downloaded the app too, but that doesnt recognise that there is a printer there at all.
    This question was solved.
    View Solution.

    Hi, here is the link for the driver.
    Link for the user's guide.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • HT1369 Microsoft Windows 8 x64 Home Premium Edition (Build 9200) Acer Aspire V5-552 iTunes 11.1.4.62 QuickTime 7.7.4 FairPlay 2.5.16 Apple Application Support 3.0 iPod Updater Library 11.1f5 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mobile Device 7.1.

    unable to contact my iphone or ipad to itunes
    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    Acer Aspire V5-552
    iTunes 11.1.4.62
    QuickTime 7.7.4
    FairPlay 2.5.16
    Apple Application Support 3.0
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.0.32
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 009DB88803B66C30
    Current user is not an administrator.
    The current local date and time is 2014-01-24 20:53:12.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.4.62 (x64) is currently running.
    iTunesHelper 11.1.4.62 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Device Sync Tests ****
    No iPod, iPhone or iPad found.

    i cant access to itunes store
    Can you walk us through what happens when you try to connect to the Store, please?

  • Solaris Express Developer Edition on Acer Aspire 9100

    I did some research and it appears that the latest edition or Solaris Express will install and work on the Acer Aspire 9100. It is a turion with a nvidia chipset, atheros wireless and an nvidia 6100 graphics chip set. Does anyone have experience with this install.

    Re research: You have tested Your hardware with Hardware_Detection_Tool? It seems to be more up to date than Install_Check. Install (or use already installed version) Windows, download this small tool and run it on-line (Internet connectionis necessary). Latest nevada version fills many gaps in previous releases.
    Good luck!

Maybe you are looking for

  • How can I burn a MP3 CD in itunes

    I bought an Asus DVD/CD burner to plug into my MBA in hopes that I could burn an MP3 CD for my car stereo. When I try to burn the CD iTunes tells me it can't find the burner. How do I mount, or setup, the burner so iTunes will see it. I can play a DV

  • Can't connect to internet even though Network prefs show all green lights

    I have 3 iMacs in our office with the same issue. I can get them to connect to the internet using Airport but not Ethernet. When I connect the ethernet the computers network preference screen shows that a green light and that an ip address has been a

  • Deprecation guessing game

    Good day, As per the title of this forum "New to Java Technology", I'm expecting to find information for the new comers Regardless how powerfull Java is/could be, finding clear and precise information is a real nightmare! I have an applet which attem

  • Change the Status to Open Items

    Hi How can we change the Status of GL Master to Open Item. We have balances in the GL Account Satish

  • Editing via iPhone

    HOw can I edit a pdf file, save properly, & share via iPhone?