NEW ACS install

I am installing ACS (3.3) for the first time - ever.
I get through all the splash screens, but when I try to creat a user or a group or a sys admin, I get "error on page". I current do NOT have it on a network - other than the big I... what am I doing wrong?

I downloaded and installed Sun's version of JAVA. That seemed to do the trick...now on to building the DB. Thanks for the input, I'll double check current servce packs installed against what Cisco recommends.

Similar Messages

New ACS appliance not showing FQDN hostname in GUI

I've installed two new ACS appliances in our environment running 5.3. I've just configured the basics to get it on the network (ie DNS, default GW, IP address). Looking at both running configs, they are identical with exception to the IP addresses. On one appliance in the GUI next to the user name in the top right hand corner, the hostname is "acs01". In the GUI on the other appliance, it shows "acs02.corp.mycompany.com". This is a minor issue but its bugging me. Anyone have an idea what is going on?
In both appliances, this statement is identical in the show run:
ip domain-name corp.mycompany.com

Hi,
So you are using a hardware RAID5 in storage pool as a hard disk. Now you added one more hard disk to the RAID5 with the tool "Dell Server Administrator" but it is not recognized in storage pool.
I think it will not work as hard disk size cannot be changed after storage pool is created. It is by default.
However why you use the hardware RAID in a storage pool? A hardware RAID seems enough for your storage requirement.
If you have any feedback on our support, please send to [email protected]

New Infinity install and Philips Smart TV

Any ideas on how to resolve my connection issue. I have a Philips smart TV which until I had Infinity and the new HH3 installed on Thurs(7th Feb.) connected without any issues with my previous supplier's BB (Sky). Tv is connected and finding net ok but cant/wont connect to Smart Tv. I've enabled Port clamping as advised in other posts but still no joy. Any other suggestions appreciated. I pretty sure its not a TV issue as It worked no problems pre Infinity and TV is as up to date as you can get,Software update etc.
Thanks
Solved!
Go to Solution.

Hi,
I have the same problem with a Philips 40pfl8605 and a home hub 3 (but not the infinity package). the tv connects to the router, either wirelessly or via ethernet, but will not load Net TV. I get an error message which says 'Philips server not found. Try again later).
Keith, I'm on my home network now but you're link wouldn't open a few minutes ago. I can't work out how to message you directly on this forum, but if you can send me the content of that link on the thread, i'd be grateful. I'm pretty sure this problem stems from the router as the Net TV has connected in the past, when I've had a netgear router. Philips have been useless and after running through standard checklists such as clearing the Net TV memory, reinstalling software (which is up-to-date) etc, simply advised to send the (3yr-old) tv for repair.
Looking forward to hearing from you.

Can the new pre installed apps in iPad 2. Like garage band, iMovie be sync back to i tune, and then sync these new apps from ipad2 to the old iPad 1?

Can the new pre installed apps in iPad 2. Like garage band, iMovie be sync back to i tune, and then sync these new apps from ipad2 to the old iPad 1?

GB and iMovie pre installed?
http://www.apple.com/ipad/built-in-apps/
Click: Browser All Built In Apps
iMovie and GB must be purchased.
If you have installed GB and iMovie on the iPad 1 and synced using iTunes, just sync the those apps to the newer iPad with iTunes. No re purchase necessary with the same iTunes account.

How do I get the old Apple ID off of my iPhone and the new one installed?

I got a MacBook Pro and decided to create a new Apple ID different from the one I previously had. How do I get the old Apple ID off my iPhone and the new one installed?

When I tried this, my music stayed the same whereas my new iTunes has only about half the music it used to. How can I get all the music to clear out so that it can sync my new music to it. Simply connecting it to the MacBook Pro and pressing Sync has not worked.

My hard drive crashed on my macbook pro and I had a new one installed and they were unable to get my pictures off of it. Is there anyone who could help? I'm going to lose all my memories of my kids! I got my old hard drive

My hard drive crashed on my macbook pro so i had a new one installed and they couldn't get my pictures off. I dont want to lose all my memories! They gave me back my old hard drive. Is there anyone that could help me?

I think how you understand the value of having backups. All you can do is:
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.
You will need an external enclosure for the old drive so you can connect it to the computer in order to try the recovery software before you buy it. But if they don't work then you will need to send the drive to a recovery service such as Drive Savers.

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard. After a few weeks the HDD failed. New Leopard install reports: "insufficient memory". I need Tiger install disks so I can install

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the install fails reporting "insufficient memory".
I assume the installation requires more memory than the OS actually needs to be able to run.
I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.

Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
You need much more RAM than that.
Leopard system requirements:
http://support.apple.com/kb/SP517

Tried to update iPod, failed, no new drivers installed. Now iPod does not show in my computer or in iTunes.

Anyone know how I can update/unbrick this iPod? It's useless. It's stuck on the screen that says connect to iTunes. iTunes doesn't know it's there. My computer doesn't know it's there. It's not the USB port.
Please don't direct me here - http://support.apple.com/kb/HT1808 - already tried, no results.
Last time it was a missing driver for iTunes but iTunes says nothing new is needed. Help appreciated.

Let me try this again. My computer said my iPod needed an update. I clicked ok. iTunes said it was doing the update. I browsed the internet. I came back to it after it was done, and it said update failed, no new drivers installed. Now my iPod touch is a brick. I cannot use it for anything. You know that screen that shows the usb cable, a white arrow, and iTunes? It's stuck there. No amount of pushing the sleep/wake button and home button will convince it to go to any other screen. When I go to 'My Computer', it does not recognize that there is anything there. It is not the USB port. Everything was fine until the update tried and failed.
I am not installing iTunes (piece of crap software that it is) on the other computer in my apartment.
I have exhausted the articles that sort of go with the problems I am having. They all assume a non brick iPod. Mine is a brick and therefore those articles, including the one you linked, are not relevant.
Not meaning to be rude, but I came into this not caring much for Apple's business model. I've had my iPod for .. a week? Maybe two, and nothing I've seen has convinced me to feel otherwise. Apple's products are supposed to just work. I am not finding that to be the case. Anyone with anything helpful please?

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

My hard drive crashed and I now have a new one installed. I have lost my purchased Adobe Creative Suite 6 Design Standard MAC OS. I have the reciept and product; can I reinstall it into the computer?

My hard drive crashed and I now have a new one installed. I have lost my purchased Adobe Creative Suite 6 Design Standard MAC OS. I have the receipt and product; can I reinstall it into the computer?

Download CS6 products
Mylenium

How much RAM should I get my new MacBook installed with?

How much RAM should I get my new MacBook installed with? I'm planning on getting a new Macbook sometime this fall. I'll probably be a light user, mostly internet, email, and your occasional Letter/Envelope.
Are their any other options that I'll want to make sure that I get?
Oh, and this will also be my very first Mac.
Thanks,
Jeff

In the link Alvin Ray posted it shows the different configurations that can be used in RAM. Officially Apple states that the MacBook supports 2 GB Ram. It can hold 4 GB but only uses 3 GB. The 4 GB would only benefit the matched pair use for optimum graphics. Unless you do a lot of very graphic intensive work 3 GB should be fine.

My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?

My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music on my ipod to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?
New itunes is trying to wipe the ipod. But have many many playlists (many hours making) which I want to save. Any help would be appreciated.

If you want to just extract the playlists from your iPod, plug it in iTunes. When it appears under devices, right->click on it and choose Export Playlists. Save them to a location such as your desktop and them import them into your library once you have copied and imported all of your music back into it.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Adobe Acrobat 9 Standard is still seeing my old scanner install. How to force it to see new scanner install.

Adobe Acrobat 9 Standard is still seeing my old scanner install. How to force it to see new scanner install? Scanner is recognized by and works fine in Windows. Acrobat however still sees Fujitsu fi-6130dj #3. I need it to see Fujitsu fi-6130dj which is what is listed in Device Manager. (Windows XP SP3).
Thank you for any suggestions.

To provide more detail and list what was done to resolve the issue but there may be a better way.
Background. When you install a USB device to a PC it is listed in Windows Device Manager as installed hardware. If you take the USB plug for any device and plug it into a different USB port on the PC the PC will install drivers again for that device. In Device Manager, if you set a system environment variable for device manager to show non-present devices you can see all of the times this may have occurred. In this specific instance there were five installations in Device Manager for one piece of hardware, a Fujitsu fi-6130 scanner. The first listing was Fujitsu fi-6130dj, then Fujitsu fi-6130dj #2, Fujitsu fi-6130dj #3 and so on. Adobe Acrobat only saw the third instance of these drivers being installed. Once I cleaned Device Manager of all Fujitsu scanner installs I was able to have a single set of drivers installed for this Fujitsu but Adobe still recognized the third instance of the driver install and I could not figure out how to force it to see what Device Manager was seeing, a single instance of the scanner being installed (with no #3 behind it).
Steps performed to try to resolve.
Repair install of Adobe - no luck - still sees the #3 instance of the scanner
Deactivation, uninstall, reboot, reinstall, reactivation of Adobe - no luck, same behavior as above
Complete removal of all scanner related software. This included the ISIS drivers in Add/Remove Programs and all other related software. This also included deleting the contents of the TWAIN_32 directory found within the root of the Windows directory and also included deleting the scanner from Device Manager.
Rebooted.
Reinstalled complete packages of both TWAIN and ISIS scanners - with the scanner disconnected. Powered the scanner back on and let Windows install the drivers for the hardware. Only at this point did Adobe see the new install of the Fujitsu scanner and no longer looked for the #3 instance of that scanner install.

My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

Sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again.

How to get existing library imported to new itunes install, old library was not backed up or exported

How to get existing library imported to new itunes install, old library was not backed up or exported. This occured due to Win 7 user profile was corrupt.

I know that in Mac OS X one can pick which library to use by holding down the option key while starting iTunes. What's the Windows equivalent?
Press the Shift key.
WIll the fact that the music is now on another physical drive make a difference
No.
I know the previous install is at least 7.0, but I have no idea about which point release.
Try checking the content of the iTunes Music Library.xml file.
Finally, what's the expected behaviour (or required procedure) with respect to reauthorization of this computer to use the same ITMS-purchased files?
You will be asked to reauthorize the computer.
(28446)

NEW ACS install

Similar Messages

Maybe you are looking for