New airport express doesn't work with Nintendo DS

I just picked up a new Airport Express. The WEP setting doesn't seem to be standard. Instead it is this Transitional Security Network that doesn't work with the Nintendo DS or the Netgear WG511T card I have. Any ideas on how to get it to work?
15" MacBook Pro 2.16GHz Mac OS X (10.4.9) 7200 RPM HD

yeah, the DS just ***** like that. Nintendo should have given it firmware upgradability.

Similar Messages

Airport Express doesn't work with Mountain Lion

I installed Mountain Lion and now my airport express doesn't work as a way to play itunes through another set of speakers.
Not only that... but the airport utility doesn't support my airport express.
Time Machine doesn't work either....
I want my snow leopard back!!!
Any insight????

I understand that Airport Utility 5.6 must be used to configure it... but that being an older version... I can't install it with the new OS... RRRGGGGGHHHH Mountain Lion!!! I'm not liking the switch at all. I've spent more time fixing problems with this ... how can I go back???

AirPort Express doesn't work with SB5100

I'm helping a friend set up a new AirPort Express MC414LL/A Model A1392 (802.11n) with her existing Motorola SB5100 DOCSIS 2.0 cable modem. I was able to setup the AirPort Express from her iPad with a network name and password. Also upgraded the firmware in the AirPort Express. However, the Airport Utility App on my iPad and iPhone connected to the AiPort Express, but showed no connection to the Internet. Furthermore, the PC that had been working fine when connected directly to the SB5100 could not make an Internet connection when connected to the AirPort Express.
I brought the AirPort Express home and connected it to my Verizon FiOS Actiontec modem and it works fine - my iPhone and iPad connect to it and through it to the Internet.
I'm wondering if the SB5100 is incompatible with the AirPort Express??

It should work.
Power down the modem and leave it powered down for a long time, as much as a half hour or longer is sometimes required. While it is powered down, disconnect its coaxial cable. Literally unscrew it and leave it that way.
Connect the Express to your modem, leave them connected, and do not disconnect them from one another without powering down the modem again.
Re-connect everything including power and let the devices complete their startup sequences. This usually takes a moment or two.
If that does not result in success, "hard reset" the Extreme or Express according to the instructions below and start over from the beginning.
If you still have trouble, contact AppleCare because you have done everything reasonable to get it to work.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Airport Express Doesn't Work With Leopard?

I upgraded to Leopard, and am trying to install my new Airport Express. I get an error message saying that Airport Express doesn't support the current OS. Anyone else encountering that?

You shouldn't need to install software unless you buy a base station released -after- the OS you're using was released. Leopard already contains a newer version of software for configuring the Express, AFAIK.

Airport Express doesn't work with password

I've been having a bizarre problem with my Airport Express lately. One day the internet stopped working so I restarted it a few times with no change. Then I did a hard reset. The internet starting working right after this. Then I tried to configure it to apply a password and all, and when it restarted the internet stopped working again. I've realized it only works when it's in "factory settings" mode, which is ok for now, but I need to put a password on it eventually.
What's going on here?

I understand that Airport Utility 5.6 must be used to configure it... but that being an older version... I can't install it with the new OS... RRRGGGGGHHHH Mountain Lion!!! I'm not liking the switch at all. I've spent more time fixing problems with this ... how can I go back???

I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. any soln ?

I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing wireless network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. I am using a set of speakers from kenwood connected to the airport express. The operating system on my macbook is mac os X 10.5.8. i am sure it is not a problem of streaming music online because i have even tried playing music which are stored in my macbook.
Is there any problem with the setting in itunes or quicktime ? Kindly reply...... I am waiting for your valuable suggestion.
Thank you a lot in advance.

I am shocked to have found this same AX audio dropout problem starting TODAY, every few seconds the audio just drops for a couple seconds and then resumes: Latest software versions of everything. No iPad, iPhone or Touch. Internet hardwired to D-Link DES1105 (1000baseT Switch) hardwired to new 80211N AX, AX optical to stereo, AX Wi-Fi internet to basic 1st-gen MacBook operating at 80211G, and an older 'G' AX extender at the far end of the house, away from all this. The MacBook streaming iTunes is usually 12 feet from AX. I've used this setup for years of trouble-free AirTunes / Airplay until today. Today I also found 2 very reliable fixes and 1 way to force a dropout, but first, I read some posts and tried ALL following settings one-at-a-time and restored them ALL because NONE of them helped: Turned off IPV6. Streamed to multiple speakers 'Computer' and 'AX' (restored to just AX). Turned off 'Ask to Join new (WiFi) Networks'. Turned off Bluetooth (can't live without Magic Trackpad, so glad that wasn't it). Here's my discoveries: Lo and behold, each time I click the Airport icon in the Menu (you know it shows you've got 4 bars from AX) when the status switches to 'Looking for Networks' for a second it CAUSES the AX audio to drop out for a couple seconds (it never did that before today.) iTunes still playing, streaming, AX laser still lit, but the 'PCM' light on stereo and the sound GOES OUT EVERY time I click the Airport icon in the menubar, just like the regular, annoying dropouts. So, to reduce traffic I quit Safari (3 tabs, no streaming, just Gmail, Google, and Netflix browsing). Lo and behold, the dropouts stopped altogether. No other Web apps going (not iTunes Store, Genius, Ping, nothing), so I launched Chrome to the same 3 tabs and the dropouts HAVE NOT RETURNED. That's right, not only did simply QUITTING SAFARI cure it, and Chrome doesn't contribute to it, but I can demonstrate it just by forcing my Airport to re-scan. Works for me, written using Chrome. The other reliable fix is to hardwire MacBook to the Switch. This is obviously not ideal, but Airplay audio doesn't drop out over Ethernet. Also, in all my tests, it made no difference whether iTunes did the streaming, or Airfoil did.

DSL to Cable Modem switch - now Airport express doesn't work

I just switched from DSL to Cable and now connecting to the internet via my Airport express doesn't work. It's fine direct connecting via ethernet.
Is there a known issue? I've tried various things but no dice.
Are my Airport expresses now married to the older modem?
Any help would be appreciated.

Okay I got a new Airport extreme since there was a chance that the new modem and the expresses weren't 100% compatible and the Extreme worked almost out of the box.
Truth is, I might have just had to hold down the reset buttons on the expresses longer so that they would revert to the manufacturer's default and they might have become functional since I did that later and my old expresses are now connected to the home network.
For anyone else with this issue, before giving up or if you don't need an excuse to buy an extreme, hold that airport reset button in a good two minutes before and then another two during the plug-in and you might get lucky.
Thanks.

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

AirPort Express won't work with 7.0.2

Everything was fine til I bought a new Shuffle. It made me upgrade to 7.0.2, now my Airport Express won't work. I have firmware 6.2 and just uploaded all of the newest updates from apple.com for it (AX). The security is off on my network and the AX is connected with a green light. Still no option to choose my home stereo which is hooked up to the AX. HELP! I have spent all day trying to get this to work!!!!

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
If I change this to Extend A Network it doesn't work properly.
This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

Publish for Approval - the new plug-in - doesn't work with Leopard

This aperture plug-in arrived for download just a few days before Leopard arrived. It worked great with Tiger. It doesn't work at all with Leopard. It appears that Leopard comes with a new version of Apache Server and it doesn't work with the Publish for Approval plugin. Does anyone know if and when an update will be released?

I'm not seeing the Java plugin in the plugins list in the System Details list.
Did you install the 32 bit Java version?
Do you see the Java plugin in "Firefox/Tools > Add-ons > Plugins"?
*https://support.mozilla.org/kb/Troubleshooting+plugins
*http://kb.mozillazine.org/Java

My 5 year old Airport Expresses don't work with the new Airport Time Capsule?

My question is after wasting hours trying to install my new Airport Time Capsule, Ive noticed that the "Airport Utility" doesn't recognize any of my 4 five year old Airport Expresses. An error message says " This version of Airport Utility doens not support this (these) base stations"? Does that mean that their is no work arounds which means I have to purchase 4 replacements?

You need the older airport utility.. that can be installed on Lion or Mountain Lion.. it cannot be installed on Mavericks.. do you have an older computer even a windows one.. or can access, borrow or bribe a friend over for drinks with laptop.. then you can configure your expresses.. !!
There is a rather complex workaround on Mavericks.. when I posted it in the past.. Apple deleted it.. go figure.
Kappy's post is still there.
https://discussions.apple.com/message/24338414#24338414
Perhaps they like him more than me.

Airport Express/AirTunes Not Working with New Verizon FIOS Connection

I was just set up with the new Verizon FIOS high speed internet, and now my Airport Express/AirTunes will not connect to my remote speakers like it did previously. The option for them is still there on iTunes, however when I select them, I get the horizontal barber pole for a minute, then the speaker selction goes back to computer.
In more detail:
Previously I had a Comcast internet connection which went through a Linksys wireless router. My Mini picked up the internet with this connection. Then I had an Airport Express hooked up to some remote speakers. They worked fine. Now, I have the Verizon wireless router hooked in directly to my Mini through the ethernet cable. I see the wireless network created by the Verizon router. I still see the wireless network created by the Linksys router. However, my iTunes can not connect to my AE/AirTunes speakers.
Note, I did reset the AE and then using Airport Setup Assistant, tried to locate it again, but it came up with nothing (other than my neighbor's new Verizon router).
Any help would be appreciated.
Thanks!

Still no luck. The green light is on for the AE.
Thanks in advance for the help.

Airport express G not working with new linksys N router

I just swapped a new linksys N router into my old G network and my old airport express is flashing amber and refusing to acknowledge the network. It does not seem to be picking up. What does this mean and how do i fix it? thank you in advance

someone posted this anyone , not sure i actually understand all of it
hours of digging through blogs and Apple help docs, with some luck and trial & error, have gotten it to work. This experience seals the deal...if a Mac can ever run Excel, I'm abandoning my PC.
For the benefit of anyone else in my situation, here's what I did:
You have to override Airport Express's default desire to make itself the hub of a new network, and force it to be added as a client to your own network.
First, plug the Airport Express into the wall, then reset it by holding down the reset button with a paper clip for about ten seconds. Plug in an ethernet cord that's attached to your wireless router.
Open the Airport utility which you should've installed from the cd in the package. It should now recognize your Airport Express and the light will turn green. Be patient...mine took awhile, and even started flashing amber before it worked.
You will need to manually configure the AE from the utility by typing in the name of your wireless network, setting AE to "join an existing network" instead of its default "create new network," and enable Airtunes.
You may need to add the "Airport ID" printed on the case of the unit to your router's MAC list. This allows the router to recognize the device. Type your router's IP address into the address bar of internet explorer to access the router settings.
If you don't see your speakers listed in a box at the bottom of iTunes, you will need to go to the settings window (in iTunes) and click "search for remote speakers connected to Airtunes."
gonna try it out, cause nothing else has worked

Older model Airport Express won't work with Mountain Lion Airport Utility

just upgraded to Mountain Lion and noticed that of my network of three airport expresses connected to various stereo speaker systems throughout the house, one of the older models won't work with the supplied version of Airport Utility (v 6.1). Here is the message it gives in the utility when I attempt to select this particular Airport Express:
"This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support."
Well, I go to download v 5.6 and none of the versions available will install on Mountain Lion! (even the version for Lion) Catch 22.
Any resolution to this (other than having to go out and buy a newer version Airport Express)?
Michael

Learn how to install AirPort Utility 5.6 on Mountain Lion here:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

New airport express doesn't work with Nintendo DS

Similar Messages

Maybe you are looking for