New AirPort Express Mac iTunes Music Streaming Issues

Hello All,
I purchased the "new" AirPort Express today from the Apple store and set it up as a client to my existing wireless network to stream music to some speakers via the phono cable.  I am running a Linksys E3200 Dual-Band Wireless N Router connected to Comcast via a Motorola SB6121 DOCSIS 3.0 modem.  I can stream music just fine from two iPhones and a Windows 7 64 bit PC (with iTunes), but can't via my Late 2011 MacBook Pro running Lion and iTunes 10.6.3.  I also tried another Late 2008 Uni-Body MacBook running Lion and iTunes 10.6.1, which also doesn't work correctly.  The MacBooks will connect successfully via iTunes to AirPlay, but the music skips about every 1-2 seconds.
I've rebooted all pieces of the network (including the MacBooks) and still no sucess.  Called into Apple Support and the tech requested I split off my WiFi networks to a 2.4 GHz and a 5 GHz networks via different SSIDs.  We connected both the MacBooks and factory reset then reconnected the AirPort to the "new" 5 GHz network.  Same issues as we saw before.  Moved the AirPort into the same room as the wireless router (maybe 5-10 feet away) and still same issues.  Apple tier two wasn't real sure, but I don't blame her since she said she didn't get to order her new AirPort until last night.  They're bumping the ticket to engineering to see what they say... but wanted to see if anyone has found a fix for it.
Thanks!
Jeff

It went all the way up the chain with Apple to engineering and they had to setup the AirPort as a standalone router.  The music played without issue from my PC, iPhone and Mac.  Upon resetting it backup as an AirPlay client it does the same skipping problem on just the Mac (however AirFoil works just fine on the same Mac).  The response I got from engineering this afternoon was-
"Jeff,
I heard back from Engineering today. Their advice is: Since this issue only occurs when the Airport Express is connected to your Linksys router, our best advice is to update the Linksys router firmware (contact Linksys) or use a different wireless router.
I apologize for all this inconvenience.
Thank you for calling AppleCare and have a great day!"
Not exactly the reply I was looking for...

Similar Messages

  • New Airport Express: Stream from iOS5 devices to multiple AEs?

    Hi all,
    is it possible to stream music from iOS5 devices (iPhone4/iPad3/Apple TV 3) to multiple (new) Airport Express devices?
    Thanks.

    Streaming music to Airplay simultaneously on/with iTunes is 100% clear.
    But as mentioned, at the German Apple website it's a bit vaguely described for the new Airports.
    Since iOS5 I can stream music to my existing Airport Express (pre the new release) from my iPhone/iPad only to one Airport at the same time. Of course I can choose a single Airport one by one, but music plays only on one at the same time.
    Apple increased the Airport selling prices by some 10$/€, so I hope it's the "fee" for the functionality to stream music to all new Airports simultaneously from the iOS devices :-D

  • I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. any soln ?

    I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing wireless network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. I am using a set of speakers from kenwood connected to the airport express. The operating system on my macbook is mac os X 10.5.8. i am sure it is not a problem of streaming music online because i have even tried playing music which are stored in my macbook.
    Is there any problem with the setting in itunes or quicktime ? Kindly reply...... I am waiting for your valuable suggestion.
    Thank you a lot in advance.

    I am shocked to have found this same AX audio dropout problem starting TODAY, every few seconds the audio just drops for a couple seconds and then resumes:  Latest software versions of everything.  No iPad, iPhone or Touch.  Internet hardwired to D-Link DES1105 (1000baseT Switch) hardwired to new 80211N AX, AX optical to stereo, AX Wi-Fi internet to basic 1st-gen MacBook operating at 80211G, and an older 'G' AX extender at the far end of the house, away from all this.  The MacBook streaming iTunes is usually 12 feet from AX.  I've used this setup for years of trouble-free AirTunes / Airplay until today.  Today I also found 2 very reliable fixes and 1 way to force a dropout, but first, I read some posts and tried ALL following settings one-at-a-time and restored them ALL because NONE of them helped:  Turned off IPV6.  Streamed to multiple speakers 'Computer' and 'AX' (restored to just AX).  Turned off 'Ask to Join new (WiFi) Networks'.  Turned off Bluetooth (can't live without Magic Trackpad, so glad that wasn't it).  Here's my discoveries:  Lo and behold, each time I click the Airport icon in the Menu (you know it shows you've got 4 bars from AX) when the status switches to 'Looking for Networks' for a second it CAUSES the AX audio to drop out for a couple seconds (it never did that before today.)  iTunes still playing, streaming, AX laser still lit, but the 'PCM' light on stereo and the sound GOES OUT EVERY time I click the Airport icon in the menubar, just like the regular, annoying dropouts.  So, to reduce traffic I quit Safari (3 tabs, no streaming, just Gmail, Google, and Netflix browsing).  Lo and behold, the dropouts stopped altogether.  No other Web apps going (not iTunes Store, Genius, Ping, nothing), so I launched Chrome to the same 3 tabs and the dropouts HAVE NOT RETURNED.  That's right, not only did simply QUITTING SAFARI cure it, and Chrome doesn't contribute to it, but I can demonstrate it just by forcing my Airport to re-scan.  Works for me, written using Chrome.  The other reliable fix is to hardwire MacBook to the Switch.  This is obviously not ideal, but Airplay audio doesn't drop out over Ethernet.  Also, in all my tests, it made no difference whether iTunes did the streaming, or Airfoil did.

  • I have set up my airport express to play music on my tv.  However, I can only stream music to it via "music" app on my iphone, neither itunes on my laptop, nor the "remote" app display the alternate speaker symbol.  What am I doing wrong?

    I have set up my airport express to play music on my tv.  However, I can only stream music to it via "music" app on my iphone, neither itunes on my laptop, nor the "remote" app display the alternate speaker symbol.  What am I doing wrong?

    I have a HP Pavillion dv6000 running Windows Vista.  Itunes is up to date.  I have power cycled the router several times   it is a Surfboard sbg6580.  still no luck with seeing the airplay symbol on itunes, but Isee it on my phone and can stream music via the airport with my phone.  I can see both airports on the airport utility on my laptop.  I'm stumped...

  • I can stream from ios to new airport express but not from windows 7 or powermac G5

    I have new airport express and older apple tv on my network.  Both are connected and found by all devices - Windows 7 laptop, Powermac G5 and all ios devices.  I can stream music via airplay to both airport express and apple tv from ios devices (one at a time of course).  I can stream from itunes to Apple TV but cannot connect to the airport express!  It shows up and I get the dredded error: An error occured while trying to connect...
    I tried some of the many ipv6 suggestions that I've seen here but nothing is working. 
    Anyone have the setup?  Is this an airport express setup issue?  Please help!!!

    OK, I'm tipping my hat to Apple's (new) online experts. Great job.
    They might be able to solve YOUR problem, too. Find them at:
    http://www.apple.com/support/expert/

  • Can the airport express be used to stream music and act as network "extender" at the same time?

    I have a time capsule as my base station but need to improve network coverage in the other end of the house. Have a new airport express that I use for music streaming. Can this airport express be used for both music streaming and "network extension" at the same time, or do I need to buy another product?

    Yes, it can. You can either:
    Extend a wireless network. The Express needs to be positioned half way between the TC and the area without network coverage, and can be flakey. This is wireless only.
    Use Ethernet/Powerline. This is the preferred option (called a roaming network in Apple terminology). This allows for the Express to be placed wherever you want, as long as it reaches the other end of the house.

  • Issues Connecting to internet with new Airport Express

    Running a Macbook pro 15" - 10.4.11
    I just bought a brand new Airport Express a few days ago. I just recently got my internet service through Comcast restored and am eager to get a wireless network up so I can play Xbox Live again.
    So issue is this: I plug the ethernet cable from the Cable modem into the airport, the light goes green. The computer is registering a strong signal, Network preferences says Airport is connected to my network. However, Safari keeps saying its not connected to the internet. When i run system diagnostics, I get a green light on Airport, Network settings, system settings, and ISP. But the light on Internet and Server stay red, and Diagnostics says it can't fix the problem and I need to contact my ISP. Comcast said they couldn't help, my connection was fine and they even refreshed it to no avail. When I plug my Ethernet cable directly into my Macbook pro, I get on the 'net no problem. I'm dumbfounded.
    I'd appreciate any sage wisdom offered. Thanks!
    p.s: Also, when I run a connection test on Xbox 360, it picks up my network, connects quickly, ISP confirms, but ultimately fails at DNS Server. Hmm.

    bl4ckr4bbit, Welcome to the discussion area!
    Most cable modems require that you power them off when you switch the Ethernet connection from one device to another. Until you reset the modem it will not communicate with the new device. When the modem is powered on it detects the new device and starts talking to it.
    Some cable modems have a reset button on the back for this reset.
    Some cable modems have a small internal battery which must be removed for this reset to occur.
    Sometimes the cable modems must be unplugged several hours or even overnight to allow equipment back at the ISP to reset.
    Did you power off the cable modem when switching the Ethernet connection?

  • Help with new airport express on older MAC

    How can I use a new airport express on an older MAC?  I am not able to install the new airport utility software because the MAC software is too old.  Can I install the airport software on my newer PC.  Will the older MAC be able to fist it and use it with AirPlay?

    You can run Airport Express on v10.4 or later.
    http://store.apple.com/us/product/MB321LL/A/AirPort-Express-AirTunes?mco=MTY3ODQ 5OTY
    I use mine with two older laptops, one running Tiger, one running Leopard, as well as newer Macs running Snow Leopard.
    Try installing the software from the CD. If there's a problem, you should see a dialog box.
    http://manuals.info.apple.com/en_US/AirPort_Express_Setup_Guide.pdf

  • Where do I find the MAC address on my new Airport Express?

    Where do I find the MAC address on my new Airport Express?  There's no label like there was on my Time Capsule (now dead).  I need to supply it to my ISP in order to get hooked up.  Thanks.

    If you use AirPort Utility 5.6, you will find the MAC addresses under Manual Setup>AirPort>Summary.
    There should be three MAC IDs: one for each of the wireless channels and one for Ethernet.

  • I am trying to sync Go Rock TRMS03SR Bluetooth Portable 3D Surround Speakers with my Airport Express or iTunes So I can play Music in Multiple rooms. I have a WiFi network, my living room speakers are connected directly to Airport Express.

    I am trying to sync Go Rock TRMS03SR Bluetooth Portable 3D Surround Speakers with my Airport Express or iTunes So I can play Music in Multiple rooms. I have a WiFi network, my living room speakers are connected directly to Airport Express, so how can I get the wireless bluetooth speakers to play at the same time in my bedroom?

    Did you ever get this to work?  My guess is that the speakers are out of bluetooth range at that distance.

  • I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
    If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
    If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

  • Airport Express 802.11g Airplay Connection Issues

    My dad has had an AirPort Express 802.11g hooked up to his stereo for a couple of years now. Uses it only to stream music. Our WiFi network is run by an older AirPort Extreme 802.11n (2nd Generation). Express firmware is at 6.3, as high as it can go for the g models.
    2 months ago, I got my dad an iPhone 5 running iOS 6, and upgraded his MacBook to run OS X 10.7 Lion so he could sync and use iCloud and all that stuff. From that moment forward, connections to the AirPort Express are awful or nonexistent for most devices. Many times after you tell iTunes or the Music app to connect to it, when you hit play nothing will happen. Sometimes the progress bar will move, but no sound will play. Other times the sound will start, go for ~5 seconds, and then cut out. No issues with staying on the WiFi network.
    Devices AirPlay DOES NOT work properly with:
    - Dad's MacBook (final-gen plastic model) running OS X 10.7
    - Dad's iPhone 5 (iOS 6)
    - My iPhone 4S (iOS 6)
    Devices AirPlay DOES work with:
    - Dad's older iMac running OS X 10.6.8 Snow Leopard
    - My MacBook Air running OS X 10.8.4 Mountain Lion
    None of his music is on the iMac, and the concept of doing a VNC to make it work would be far out of his level of understanding.
    Is this a case of me just needing to get him a new AirPort Express for full compatibility, or is there another workaround? Eventually I'm going to get him off of his MacBook and up to something more currently, like my Air in September when I upgrade.
    This is practically the only thing my dad uses his computer for, so any help I can receive to get this working would be MUCH appreciated.

    Hello niclake,
    I found an article for you that would be a good place to start troubleshooting Airplay on the AppleTV.
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Troubleshooting performance issues with AirPlay or AirPlay Mirroring
    If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
    Ensure that other devices are not trying to stream to the same Apple TV at the same time.
    Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
    Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
    Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
    If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
    If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
    If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
    Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
    All the best,
    Sterling

  • Buzzing sound when connecting my new airport express to bose system

    I recently purchased the new Airport express with the purpose of streaming my music from itunes to my bose system. As soon as I connect my stereo to the Airport express a loud buzzin sound comes out even if the stereo volume is low.
    I've tried the same cable plugged straight from the stereo to my ipad or laptop and this buzzing sound is not there at all. This only happens when I connect the stereo to the new Airport express.
    Please help, before I have no option but to return it.
    The device firmware is up to date.

    Temporarily, plug a pair of headphones into the audio jack on the AirPort Express and test to see if you still hear the buzzing.
    If no, then the Express is operating correctly. The issue is somewhere else....either an intermittent connection in your audio cable, or the jack on the Bose system is defective.
    If you still hear the buzzing when you test the AirPort Express with a pair of headphones, the Express is defective and will need to be returned.

  • New time capsule+new airport express=daily dropped connections

    I have a new 2 TB Time Capsule and a new Airport Express that I puchased to update my old set-up of an Airport Express and Airport Extreme.
    I have the TC set-up as the primary base station in the back of the house and the airport express set-up to extend the network in the front of the house. I was getting constant disconnects up front for the first several days so I finally exchanged the new AX for another one thinking maybe the first one was faulty. I reset the TC back to factory defaults for good measure and re-set up my network the same way with the new AX.
    Two days with no disconnects, thought it was fixed, and then it started again...no joy. Not as often as with the first AX, but still it happens 2-3 times a day and always up in the front of the house while we're on our MacBook Pro or MacBook Air. When this happens both the AX and the TC have green lights and full bars of connectivity show in the menu bar, but yet no internet access. The only way to reconnect is to restart the AX. I have noticed too, that when this happens, the Airport Utility does not show the TC at all...even though it's light is fully green and it should be there, it just shows the AX until I restart and then both show up again.
    I've tried changing the channel from automatic to a specific channel but this really doesn't change things much. Now I'm starting to wonder if something is awry with the TC. I've also noticed that it sometimes fails to back up because it can't find a connection to my iMac which is right next to it in the back of the house.
    So far this upgrade has been more of a downgrade. Any help would be greatly appreciated!

    Just an update and still seeking some advice for this situation...anybody?
    I tried re-setting both TC and AX to factory settings and re-configuring. Still get at least 3-4 dropped connections up front on a daily basis; however, TC has been connecting successfully and backing up my iMac, so at least that seems to be ok.
    Still the same situation with the TC not showing up in Airport Utility every time the network connection drops happen...just the AX is seen until I finally have to restart the AX and then both can be viewed in Airport Utility and the internet connection is restored. Sometimes I can restore connection by simply toggling my airport access on and off in the menu bar of my MacBook Pro, but more often then not, I have to restart the AX itself to get back online.
    Is it possible that this could be an issue with the TC? Somehow it might be dropping the connection to the AX? I can still exchange it for another if this may be the case. I'm already on my second AX thinking that the Express was the problem initially.
    So far, nothing seems to help the situation. About the only thing that I haven't done is configure the AX to just join the network rather than extend it...but that would be defeating the purpose of why I bought it in the first place (to stream iTunes and extend network).
    I never had issues with my old set-up, but then I had it configured as a WDS because I didn't have the option to "extend" the network as it was an older AX and Airport Express.

  • Using Airport Express for iTunes on a non-Apple router

    In the past, we used a Microsoft wireless router, and all of the Airport Express stations worked great (we have 3). You can start up iTunes, and iTunes showed all three Airport stations in the popup at the bottom, allowing us to pipe our iTunes music to anywhere in the house.
    The Microsoft router starting going bad (2 years old), and so we replaced it with a Linksys wireless router (the one that also supports a USB printer). The Linksys is working fine for printing on that USB printer from any computer in our LAN, and it provides all the LAN computers with internet connectivity; however, the Airport Express stations are flakey at best.
    At first they didn't even work (aka, didn't show up in iTunes anymore). I ran Airport Admin and connected each one of them to the iMac directly to configure them. After configuring each one, they did start to show up in iTunes. I restored them to their original locations through out the house using wireless connectivity, and they did show up in iTunes and allowed music to play through. Unfortunately, after a day or two, they dropped off, and they never came back. We never had these kinds of headaches with the Microsoft router, so I'm wondering if there is some incompatibility with the Linksys and Airport Express, or if there is some configuration parameter on the Linksys that I need to tweek. Anyone have any ideas?

    I have a similar issue with my Airport Express connected to a Linksys wired router (BEFSR41, the common Linksys 4-port router). My iMac is connected (wired) to one of the ports on the Linksys and the AP Express is connected to one of the other ports. Airport Admin on the iMac can't see it unless I manaully connect to it by specifying the IP address (having fixed its IP from my PowerBook via wireless) and (of course) iTunes on the iMac can't see it either.
    I had an older generation BEFSR41 and this setup worked great, but they must have changed something. I can't seem to figure out how to disable whatever port-to-port (network jack to network jack on the router that is) that they have added the "blocks" Airport Admin utility from seeing it.
    Airport Express   Mac OS X (10.4.8)   Aiport Express connected to a Linksys BEFSR41 wired router.

Maybe you are looking for

  • Application server read

    Hi Gurus, I have requirement to read the flie names from application server and upload to Ztable then accoring to time stamp it has to excute the infopackage ( for this routine in infopackge external data tab). I find some Function module "SUBST_GET_

  • Logic Express 8.0.2 available

    Get them while they're hot... http://www.apple.com/support/downloads/logicexpressupdate802.html (Usual disclaimers apply) Pete

  • Does anyone know if the Nomad muvo2 xtrainer will ever be upgraded to support secure

    A bit misleading, The "playsforsure" site says that the xtrainer will work on sites that require secure wma support (FYE Subscription service and Napster to go). I like the idea of renting my music instead of paying a buck a track for songs that wont

  • Come on abapers.....n have ur points

    Hi all, I m trying to use at cursor-selection in module pool. Some buddy suggested me to use, function code "CS" and function type "S" for fields.. but how can we define function codes for fields... it's strange... Ples let me know in simple ur writt

  • To do list date formats

    Some of my to do list's items show their date in the to do list as #/##/## (9/12/05 for example) while other show in this format: Sep 13, 2005. Any known reason for this? Andrew T.