New Airport Extreme (2014) does not see USB Drive

Just fired up my new 2014 Airport Extreme and attached a Toshiba 3 TB USB Drive. My new (late 2013 iMac) does not see the new drive in Disk Utility.
The Extreme works in all other ways; ie, as a router, as a wireless node.
It came to me formated as a Windows drive, so I attached it directly to my MacBook Pro (which saw the drive) and reformated it as a Mac Drive (Journaled, GUILD). It showed up just fine on the MacBook Pro desktop.
When I reattach it to the Airport Extreme, it still does NOT show up in Disk Utility on the iMac.
Help Please

When I reattach it to the Airport Extreme, it still does NOT show up in Disk Utility on the iMac.
That drive will not show up in Disk Utility on the Mac.....since the Toshiba hard drive becomes a network drive when it is attached the AirPort Extreme.
Disk Utility will not display a network drive. It will only display drives that are connected directly to your iMac via USB, FireWire, etc.
Check using AirPort Utility to see if the AirPort Exteme recognizes the drive.
Open AirPort Utility, click the AirPort Extreme icon, then click Edit
Click the Disks tab at the top of the next window that appears
The drive will appear here if it is recognized by the AirPort Extreme.
In the example below, my WD Drive is connected to the USB port on the AirPort Extreme.

Similar Messages

My new mac mini does not see usb drives, but in hardware info the usb is visible

my new mac mini does not see usb drives, but in hardware info the usb is visible
i'tried several usb flash drives even brand new ones, they are visible onder hardware info but they are not on the desktop nor in the finder.
what is wrong and doe anyone has a solution ?

It does not show up in disk utility, its only visible through systeminformation.
When you plug in the USB flash drive and then refresh systeminformation it becomes visible.
To remove it I shut down the computer because I cannot eject the USB device anywhere.
After starting up again when I have removed the flash drive it has gone from the systeminfo USB list.
By the way my USB mouse and keyboard are working fine, I also changed ports of these and they still keep on working so I don't think the USB ports are defect.
I guess it some kind software problem, and because I'm new to Apple I do not know much about it how to solve this.

AirPort Extreme Does Not See USB Drive

I've had no luck getting my AirPort Extreme (802.11n) to see a USB hard drive. Using a WD MyBook, there's simply no response from the AirPort. Is there some trick to getting the AirPort to see the drive? Clearly this product isn't working as described! There's no mention in any of the marketing materials of needing to do anything but plug in the drive to the USB port.

This whole 'mount USB drive' feature appears to be VERY problematic. I cannot get the drive attached to my Airport Extreme to be visible to the iBook which runs its net connection thru the AE unit.
Has anyone submitted a bug to developer.apple.com?
If you have not - it is possible to acquire a free developer's account - just fill out the forms - and then you can add your voice to the chorus of bugs posted - which is WAY more likely to get attention by Apple engineers than just posting on this forum.
If anyone has any news about how to systematically solve this problem, please let me know.
Thanks!
Lance Drake
G5 DP 2GHz Mac OS X (10.4.8) G4 iBook Airport Extreme Iomega USB 160GB drive

Airport Extreme card does not see any networks...help!

I have a home network that is working fine - 2 linksys routers with WDS set up... it all works great - an Ibook g4 running 10.3 and has an Airport Extreme card connects flawlessly everyday. As does an old G4 powerbook with an old airport card.
however, I have this dual g4 with 10.4.3 running, and a recently-installed airport extreme card.
When I turn airport "on" it never sees our network. And it doesn't see my neighbors' networks, either, which are also always visible.
I can, howevr, connect via ethernet to the router that is somewhat nearby. that networking is fine...I can get on wired, but not wirelessly.
I've installed the 2005-1 update, and have run Software Update as well to see if there are any other patches/updates necesary. so as far as I can tell, I am up to date.
system profiler says:
Wireless Card Type: AirPort Extreme
Wireless Card Locale: USA
Wireless Card Firmware Version: 404.2 (3.90.34.0.p16)
Current Wireless Network: wireless network not available
and in the extensions section for the airport, it says:
Version: 4.0.4
Last Modified: 11/20/05 9:55 AM
Get Info String: 4.0.4, Copyright © 2002 - 2005 Apple Computer, Inc., All Rights Reserved
Location: /System/Library/Extensions/AppleAirPort2.kext
kext Version: 404.2
Load Address: 0x39738000
Valid: Yes
Authentic: Yes
Dependencies: Satisfied
Integrity: Correct
I am at a loss. Is there anything else I can do before writing off the card as a bad card - or perhaps the logic board is faulty?
I hope there is a simple solution to this. I appreciate your expert help.

Go back and recheck the Airport Extreme card installation. Make sure you plugged the connector for the internal Airport antenna into its socket on the Airport Extreme card itself - and make sure the plug is fully seated into its socket (none of the metal sleave should be showing).

Airport Express (n) does not reconnect USB drives after reset

I've looked high and low for an answer to this but haven't found anything. I have a USB drive connected to my Airport Express (n). My router "recovers" itself fairly often, probably because of an unreliable DSL link. Once the router has recovered from the dropped outside connection, the attached USB drive no longer appears as shared. I have to go unplug the drive, then plug it in again to make it active. Is this really the expected behaviour? If a drive (or printer?) is attached when the router resets, shouldn't it find and mount the attached device again? Is there setting to control this behaviour?

The AirPort Express base station is only 802.11b/g.
The square AirPort Extreme base station is 802.11b/g/n.

Airport Extreme utility does not see base station.

The utility doesn't see the base station, yet I can connect and surf the internet. I have noticed that the light is flashing yellow, but I don't know how to stop it or turn it to green. I am using XP.

If you have wireless turned on and you do not have security enabled, it will flash amber. You can over ride the flashing amber in the utility, or if you are hardwired, just turn the wireless function off.

TS1741 Remote isn't recognising my new AirPort Extreme but does pick up an old appleTV and ap express and extreme.anyone know why? It does pick it up from the Music app

Remote isn't recognising my new AirPort Extreme but does pick up an old appleTV and ap express and extreme.Anyone know why? It does pick it up the new AP express from the Music app and plays through a single speaker

Remote isn't recognising my new AirPort Extreme but does pick up an old appleTV and ap express and extreme.Anyone know why? It does pick it up the new AP express from the Music app and plays through a single speaker

Windows 8 does not see hard drive on Satellite A200

Windows 8 does not see hard drive on A200.
How to install?

> with Vista works fine,
Does this mean that Vista is still installed or is HDD visible while Vista installation setup?
Some notebooks HDD controller needs SATA driver in order to be able to install system.
Sat A200 is a little bit older but I dont think the SATA driver is needed here to install Win 8.
I guess you didnt any SATA drivers to install the Vista right?
Set the BIOS to default and try to boot again using Win 8.

[SOLVED] New install does not see SSD drive

Ok, I have a DFI motherboard which at first did not recognize my new Intel SSD drive I have installed. After updating the BIOS, it now correctly recognizes it. However when I run the 2009.2 cd and try to prepare the drives, it does not show any drives listed?
/sbin/fdisk -l
does not show any drives either so it looks like arch cant see any installed HD's which makes since, but the motherboard does show the new Intel SSD as a Sata drive right under my DVD player?
Any help?
Edit: I hooked up my old Seagate drive and it shows up fine. Any idea on why this SSD is not playing nice?
Solved: I have come to the conclusion this has nothing to do with the Arch install, but is simply a hardware issue with my motherboard. I installed the SSD drive in my wifes pc, it seen the ssd as a sata drive while booting, it seen it when arch was initializing, it seen it when I did a fdisk, and when i finally tried to install, it was there too!!
So there must be some issue with my old DFI MB. I will work on that or upgrade..Thanks to everyone who helped out...
Last edited by banshee28 (2009-02-28 16:48:07)

lilsirecho wrote:
I had trouble with my throttle device not making contact with the data lines when connected to USB.
I assume the SSD has the same connector as the motherboard and the cable can be reversed end to end to test for performance.
I use a multimeter to verify the presence of power to the device.
Sata cables are known to be flaky.
Throttle devices use 5vdc power from USB connector and are connected to esata cables at the same time since sata ports do not supply power. The connections for throttle are on opposite ends of the device.
I am not familiar with the SSD power setup but assume it is 5vdc as well.
No other suggestions here..................
Yes, the cable should be able to be reversed as the ssd drives are identical compared to normal sata drives in respect to the cable connections: one sata data connection and one power. I will try some different cables and see if that helps. I did try a new port on the mb which did not work, and when i used the current cables on my older seagate drive it worked fine
Last edited by banshee28 (2009-02-26 13:15:52)

New airport extreme card is not detected

I brought a new airport extreme card and installed as instructed but my computer is not detecting it at all. Im new to using a Mac, so please can someone let me know what I'm doing wrong? If you need more info please ask.
emac Mac OS X (10.3.9)

this is definately the correct card...
How do you know? To identify which eMac you have, you can use KB 86325, eMac: How to locate the serial number and identify your model. Then you will be able to determine if you need the AirPort card or AirPort Extreme card.
What kind of keyboard are you using?
The command key probably has an Apple symbol.
Here are some other symbols for those keys:

After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

Hello, chocotac0.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
Cheers,
Jason H.

HT1481 bought new shuffle but mac does not see it why not?

bought new shuffle but the mac does not see it in itunes please tell me why?

My battery is not quite flush, but I use mine on soft surfaces (as I'm not supposed to), so I haven't noticed any rocking. Have you tried taking your battery out and trying to get a better fit?

Bridge CS4 Does Not See External Drive

Very suddenly, Bridge is not seeing the external USB connected driver I use to store recent photos. I read a similar message here and the writer was told to add the drive to favorites. That appeared to work for him, but I could not do that since the folder doesn't appear under Computer in the favorites section either. The drive appears in Windows Explorer. I am using Vista 32. Any suggestions?
Fran

Did you power up or connect the external drive after Bridge had been started? I've observed that Bridge only includes drives that were attached and active when Bridge was launched; it does not add a drive to its folders list if that drive is started after Bridge is active. With your external drive on (and appearing in explorer) try exiting and relauching Bridge.

HP Notebook 9628nr does not see DVD Drive no optical drive in device manager

for some reason it does not see the dvd drive this happen after I flash the bios which was recommended from the HP website can anybody tell me how to fix this problem

Im having a problem like this, DVD not appeare in my computer and system devices, after that a webcam will broken also( unknow device USB); solve: damaged motherboard, one of bridges- north probably
regards
and watch your motherboard properly

G4 disk utility does not see hard drive

I am helping someone with a G4 Quicksilver. She is running 10.4 but only has disks for 10.1 and 10.2. When I boot with the 10.2 CD, disk utility does not see the hard drive. I was thinking of connecting her computer to my MacBookPro (Intel, 10.5) via target disk mode and then running Disk Utility. Is that crazy? She is suffering from slow startup and grey screen. I've disconnected the periferals, safe booted, reset PRAM. She really needs Disk Utility.

with the 10.2 CD, disk utility does not see the hard drive.
Disk Utility from 10.2 should see the hard drive (the drive name should appear in the left box). If it does not, the drive is malfunctioning or has a loose cable.
If you attempt to Verify, it will complain that there are illegal values in reserved fields in several different record types. Using this older Disk Utility to repair a 10.4 disk may cause more problems than it solves.
As Tom \[Texas Mac Man] says, you should only repair 10.4 and later disks with 10.4 and later Disk Utility:
HT2648- Only use Mac OS X 10.4-compatible disk utilities with Mac OS X 10.4 volumes
• If you boot the regular Hard Drive (no CD/DVD required) while holding down the Shift key, it will do a quick check of the Hard Drive, then boot up in "Safe Mode". This will fix any simple Disk problems.
• 10.4.3 and later can do a Disk Utility Verify of the Boot drive, "live" (but cannot Repair "live").

New Airport Extreme (2014) does not see USB Drive

Similar Messages

Maybe you are looking for