New airport extreme and printer issues

OK here is the deal
I have the new airport and a hp psc 750 printer. I have a new macbook which can not print on this printer. It will recognize it thru bonjour but will not install the driver - the odd thing is that I have a pc connected directly and a windows based wireless laptop which both are able to print via this airport. I also have an external hard drive that is connected to the airport. All of the computers are able access this drive. So all appears in order except for the macbook-printer issue. I contacted tech support and they claimed driver issue. Anyone have any ideas - I have updated the most recent drivers for this computer and I was able to install this printer via a usb connection. Thanks

There have been a few posts about issues with HP printers working or not working as the case may be through the extreme. I can't remember what they say, but a search for HP in this forum may well help you.
Sorry to be so vague, just thought it might be a start for you.

Similar Messages

  • New Airport Extreme and iPhone Issues

    I've had the networking day from ****. I previously had a 3rd Gen Time Capsule at our restaurant, connected to a Cisco 26port gigabit POE switch and Comcast digital voice and internet. Over the past few days, employees have reported trouble accessing the the Wifi network. After several restarts and firmware upgrades (including the dreaded "firmware problem" to fine update), nothing worked. I changed channels, back to auto, back to specific channels, back to auto. Made open guest networks. Nothing worked consistently. My iPhone might connect and my friend's might not. Nor his laptop consistently. Our Axis network cameras might take a bit extra time to connect. All quite random and quite frustrating.
    So I swap out an older Airport Extreme (4th gen I believe) using the same configuration as the TC (Time Capsule). It works fine, except for the last port not working as expected. No matter, I plug the mac mini into the Cisco switch and off we go. Nevertheless, I'm still told we are suffering random Wifi issues. So I buy a brand new AE (5th gen) today to replace that one. Should work like a charm I thought. Right....    
    Several hours later, I finally have the new AE working, but only after doing several hard resets/factory restores, the works. For some reason, the mac mini could not successfully update any of the connected AEs - whether connected directly into the same AE, or if the Mini was connected to the switch. Nothing worked. Every time I tried to update the AE, it would hang and force me to unplug and plug it back in. It would also never save setting changes. I finally resorted to a friend's macbook to be able to restore it successfully. And once that worked, the mini was able to update the AE flawlessly. Our Point of Sales (POS) machines connect fine, our cameras connect fine, wifi printer connects, and the mini connects, and everything has internet.
    Except my iPhone 5. Of course. It gets a signal fine (full bars). It gets an IP address. But I can't surf the web. Or download email. Or iMessages. Anything. No internet access. I try hard restarts on my iphone. I try assigning IP addresses by MAC address. I try resetting the AE. I try renaming the WiFi name. Nothing. I can make a guest network that works (on a different IP table, btw - 172, not 192.) But other than that, no access. Grrrr.
    So I have a "working" AE router where some devices successfully connect (through wifi and ethernet) and some dont' (wifi iPhone). My iPhone connects fine to my home TC. So shouldn't be anything to do with that. But I'm at a loss. I'm going to go back and restore everything and power cycle everything tonight or tomorrow night. I don't know if that will help, but it's worth a try. Lord knows it feels like I've tried everything else.
    Anyone have any good ideas of where to start besides voodoo dolls and baseball bats?

    I took mine back, because I was having these very same issues. We use contivity too. I was able to connect only to one of three of the servers we manage (in Europe). I couldn't connect to the servers in Asia or here in the USA.
    Replaced the Airport Extreme with my trusty old d-link 624, and no issues connecting to any of the three hubs.
    Otherwise, I liked the Airport Extreme, and I'll consider buying it again when and if they address this VPN issue. I work at home so its obviously a "deal breaker" for me.

  • I have a new Airport Extreme and an old airport express.  I am getting an amber light on the new Extreme and a green light on the Express.   I have internet no problem but the status light is blinking amber

    I have a new Airport Extreme and and old airport express.  I am getting an amber status light on the Extreme and a green light on the Express.  The Extreme is blinking amber all the time.
    I have internet and everything seems to be working.
    I have reset and pulled the power cord on both the extreme and the internet block
    How do I make it Green?

    If things seem to be working OK, but the amber light is flashing......the AirPort Extreme has a message for you. To see what that might be......
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon
    Click on the amber dot in the small window
    It might be a message that a firmware update is available for your AirPort Extreme.

  • Just bought a brand new Airport Extreme and having trouble with it being recognized. I have a Mac version 10.5.8. Is my computer compatible?  I have the Airport Express now and it works fine.

    Just bought a brand new airport extreme and having trouble with it being recognized.  My mac is version 10.5.8.  What should I do?

    The new AirPort Extreme needs the 6.x version of AirPort Utility, which comes packed in with Lion 10.7.5 or Mountain Lion 10.8.x......or......you can also configure the device using an iPhone or iPad running a recent iOS.
    From Apple's Specifications:
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
    A few options.....
    Borrow another Mac running Lion or Mountain Lion for 10-15 minutes and set it up. The Mac running 10.5.8 will be able to connect to the wireless....but it will not be able to make any changes to the configuration of the Extreme.
    Update to Lion or Mountain Lion.....but check first to make sure that your Mac will support the operating system first.
    Use....or borrow an iPhone or iPad to set up the Extreme

  • Can I add a WiFi printer through WPS with the new AirPort Extreme and AirPort Utility 6.3?

    It says here that AirPort Utility 6.2 supports WPS-capable WiFi printers, but on the new AirPort Extreme techs pecs Apple insists that the way printing is shared is by connecting the printer to the AirPort Extreme with a USB cable, which really defeats the whole purpose of WiFi printing doesn't it?
    Does the new Airport Extreme support WPS-capable printing? Does AirPort Utility 6.3 support it?

    Does the new Airport Extreme support WPS-capable printing?
    Yes
    Does AirPort Utility 6.3 support it?
    Yes

  • New Airport Extreme Set Up Issues

    I purchased a new Airport Extreme 802.11n Wi-Fi Wireless Base Station today. I followed the instruction and set it up. My problem is I can not get the networking capability across my family members machines.
    My set up is that I have Two Compaq PCs running Windows XP connected via ethernet to the AEBS and I have a Third Compaq PC connected wirelessly. They all can see the network and are getting an IP addreess assigned by DHCP (10.0.1.199, 10.0.1.200 and 10.0.1.197). The problem is they can't see each other when I try to visit workgroup (All have same workgroup name 'MSHOME') computers or the USB printer I have plugged into the AEBS. I have been at this for 4 hours reading posts / rebooting PCs & AEBS and changing setting with no luck. Any help wouldbe greatly appreciated.

    I have gotten the Printer on the USB connection work thru the Bonjour connection. Still have not been able to view my PCs on the Network or in the Workgroup still.

  • Setting up my new Airport Extreme and it cannot find the IP address?  The modem works fine when I bypass the Airport.

    Setting up my new Airport Extremem and it cannot find the IP address.

    Re: Airport Extreme IP Address Issue
    After hours of trying everything else, this worked!!!
    From: Comcast Networking/Router/Wifi Gateway:
    Re: Airport Extreme IP Address Issue
    11-20-2012 07:11 PM
    MyComputerGuyJo:
    I just wanted to add what Apple Support walked me through. Worked perfectly. Similar to some of the posts here. This assumes you have finished the setup of the Airport using DHCP to obtain the IP automatically from Comcast and it says the IP is invalid.
    Power off\on Sequence
    1, Power off Comcast Modem. Remove Battery back up, if it has one. Disconnect the coax cable.
    2. Power off Airport Extreme
    3. Let both sit for 3 minutes.
    4. Reconnect coax cable to Comcast modem and replace battery and power up.
    5. Wait a minute or two to make sure the Comcast modem is completely up and then Power on the Airport Extreme.
    (When AP asks for DNS, Type in both addresses below)
    Re: Airport Extreme IP Address Issue
    11-01-2012 03:07 PM
    Freyfisher: I had the same problem whenn I switched to the Airport Extreme yesterday.  Here is what I did:
    1:  uplugged modem for 30 sec. and detached all ethernet cables.  Plugged back in and reattached airport extreme cable after all lights were solid on the modem. Then, I went into Airport Utility and selected, "Base Station"> "restore default settings".  Then" Base Station"> Restart.  Then go through setup assistant again.  If no luck, try setting IPv4 to 10.0.1.2, subnet to 255.255.255.0, router to 10.0.1.1. IPv6 set to OFF if having trouble.  DNS adresses: 75.75.75.75, 75.75.76.76, search domain hsd1.ST.comcast.net where "ST" is your two-letter State abbrev.  Hope this helps someone....

  • New Airport Extreme and Older Airport Express No Longer Works

    I recently bought a new Airport Extreme base station.   Now the Airport Express that I've had for a number of years no longer works, flashing amber.  It shows up under the Wi-Fi icon in the menu bar, but when I try to follow Apple's instructions for configuring it, I get this message: 
    "This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support."
    I then tried downloading and installing Airport Utility 5.6 on my MacBook Pro (running OS X 10.7.4) and received this error message: "AirPort Utility can't be installed on this disk. The version of Mac OS X on this volume is not supported."
    I then turned to my IPad, which also detected the Airport Express under Wi-Fi Settings but returned a message when I tried to set it up that the Airport Express couldn't be set by this software and re-directed me to the support web site.
    While we have an Apple TV unit, I used the Airport Express to stream music directly to our stereo from my MacBook and IPad and Phone and would love to be able to continue to do so.  Has anyone found a workaround for this problem, or will I be forced to buy a new Airport Express as well?
    Thanks for any help you can offer,
    Steve

    I then tried downloading and installing Airport Utility 5.6 on my MacBook Pro (running OS X 10.7.4) and received this error message: "AirPort Utility can't be installed on this disk. The version of Mac OS X on this volume is not supported."
    I just tried this on my MacBook Pro running 10.7.4 and had no problems downloading and installing AirPort Utility 5.6 for Mac OS X Lion
    AirPort Utility 5.6.1 will not install on a Mac running Lion....only Snow Leopard or Leopard.
    Can you check again to make sure that you are trying to install 5.6 and not 5.6.1?

  • TS1253 i have airport extreme, and printer works with my imac, but not with my mac book pro??

    i tried setting up the printer under my wireless network only, and using the printer information, tried both and nothing works, my imac's same settings for the printer, and just cant get it to work.
    i am ussing airport extreme, and it shows printer conecting etc. but then it says not programed correctly and it fails.
    i dont know what else to try, i have followed every step on the manual, and nothing works..
    someone help me

    Could you open System Profiler on the iMac and the MBPro and select the Printers entry. Then in the top right pane you can select the printers entry and the bottom right pane will show information about your setup. Can you copy this information from both Mac's and paste back here.

  • IPads, Airport Extreme and Printing

    Hi all,
    I bought an Airport Extreme and have plugged a printer into the USB. The instructions imply anything on the Airport network should be able to use the printer.
    Both my desktop and laptop Macs can, but I was really surprised to find that our iPads can't see it. It is enabled in Airport, but I haven't done anything with Bonjour.
    I've looked through posts on here and it seems that for some reason iPads can't connect to a printer on Airport Extreme... this seems really, really odd!
    I have no intention of buying an HP printer, which seems to be the only straightforward option. I tried searching for an oft-mentioned App called "Printopia" but it's no longer on the (Canada) app store.
    This really does beggar belief.... it's only printing, for goodness sake! Surely it's just a matter of streaming data to a printer... which the iPad should surely be able to do over the air to the Airport Extreme??
    Does anyone have any ideas how I can print from an iPad, without buying another printer?
    All advice appreciated!

    Thanks both.
    I didn't think about drivers as I haven't had to install one for Mac for (probably) years! Things all just work when plugged in!
    I tried Canon but their software only works with their wireless printers, which doesn't help me.
    I didn't realise Printopia works just from a Mac.... in which case I might as well carry on doing what I'm doing now... emailing or synching docs through iTunes and print from the Mac.
    Lets hope other printer manufacturer's make AirPrint capable machines soon...

  • Airport extreme and printing on ipad

    I have an airport extreme and a usb printer connected to the airport extreme. I'm trying to print using the airport extreme to a non airport printer I don't see the printer on the ipad when I select printer. (nothing shows up)
    But when I add a printer on my mac that is connected to the airport extreme I can see the printer and it shows up as bonjour. (two entries show up, one with the location set as the base station the other nothing showing anything in the location option.
    Any idea's why the printer doesn't show up on the ipad or my iphone?
    Thanks

    Since you do not have an AirPrint compatible printer, you will need to install an App like Print Central to see if it might allow printing from the iPad and iPhone.  Most printers are supported, but you really will not know if it will work until you try.
    PrintCentral for iPad on the iTunes App Store
    Please post in the support area if you need more help in that regard. We are not iPad and iPhone experts here.
    Using iPad         Using iPhone       

  • Airport Extreme and Printing : is there a solution

    HI all,
    I have gone through many topics on printing with airport extreme and I have seen a lot of people like me having the same problem : the printer plugged to the usb port of the Airport Extreme is visible but can not print.
    People tried to change firmware, plug unplug the printer, etc... But it seems that there is no solution
    Is there really any solution ?
    It is the first time I see an Apple Product which such problems ... Is there anyone from Apple who can answer this problem ?
    Thanks in advance

    I HAVE THE SOLUTION (AT LEAST IT WORKS FOR ME !!)
    Thanks to another post (http://discussions.apple.com/thread.jspa?threadID=1201663&tstart=0) :
    I changed the USB Cable, and now it works perfectly.(souns so simple ... but it worked) (it is strange, because I was able to print through usb with my old cable ..)
    Many thanks for this help

  • Windows, Mac Non-wireless Mac, Airport Extreme and Printer

    I bought a Canon Pixma MP500 printer at the Tice's Corner Apple Store. We wanted to put this in the back of our Airport Extreme and did so. Here is our hook up:
    eMac Airport Extreme Cablevision Cable Modem
    Printer
    The eMac goes through the ethernet input, and the other ethernet input goes to the cable modem. We have a printer in the back hooked up as well. This Airport Extreme provides wireless security and working WiFi internet to the eMac, a wireless iBook G4 and a wireless HP-Compaq NC6220 Windows XP computer. We have the macs hooked up to printing correctly, just not the HP-Compaq. Thus it is wireless nad connects to our internet interface fine (yes, the wireless switch is on), it is a company computer with a VPN and firewall (that allows for printer installation). Note that the HP-Compaq nc6220 uses Intel ProSet Wireless as its wireless client. I tried installing Bonjour for Windows and the steps in the article in the link: http://docs.info.apple.com/article.html?artnum=107998and it did not work. Therefore, I cannot wirelessly print on all 3 computers. The main problem is the HP-Compaq. I am out of things to try.
    If anyone has any advice, I would apreciate them to post back. Check back soon,
    thatthaneguy
    HP-Compaq nc6220   Windows XP   Windows XP Professional

    If the PC is connected to the work VPN then it is part of the work network and can no longer access local resources on your network such as a printer.
    If the VPN is not operating then try these guides.
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
    http://www.ifelix.co.uk/tech/1004.html
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
    http://www.ifelix.co.uk/tech/1008.html
    Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
    http://www.ifelix.co.uk/tech/1012.html
    iFelix

  • I have a new airport extreme and can't set ip up

    Hello, first of all I have to say that I'm from Argentina so forgive my English mistakes.
    I recently bought an airport extreme and I can't set it up with the airport utility. I have windows 8, I download the Airport Utility and a message says that an error occurred while trying to access the apple device. The Airport has flashing amber light. And I read the manual in English and Spanish and could not find the solution.
    I can access internet but only with this laptop and in unsecured way.
    Please, someone can tell me what to do.
    Thanks.

    Be sure that you've installed Bonjour Print Services for Windows:
    http://support.apple.com/kb/DL999
    Connect the AirPort Extreme directly to your Windows 8 computer by Ethernet cable and then run AirPort Utility.

  • Installed my new Airport extreme and try to link it to airport express  but the wifi still very slow

    I installed my new Airport extreme today and try to link it to my airport express to expend my wifi coverage to my second floor  but the wifi si very slow on second florr not better then without express? what can I do??

    Hi Francois
    Any wired connection or WiFi network extension (using your AirPort Express) with your second floor will make your network signal stronger but not necessarly faster.  If your WiFi signal is so poor that internet connection keeps dropping, it will make a speed difference.  Otherwise the only difference you'll notice is that the range of the wireless network has increased.
    You say "wifi is very slow on the second floor".  Do you mean that the internet is slow?  Is it very fast on the first floor?
    Try checking your internet connection speed on a laptop on each floor:
    speedtest.net
    and press "begin test recommended server".
    The download speed should approximate your ISP contracted speed.  Upload speed will be a fraction of this.  Wifi will be slower but unless you have a super-fast internet connection, you probably shouldn't notice it.
    Peter

Maybe you are looking for