New Airport Extreme + Express. Will all run at 54Mbps?

Hi,
I have some Express base stations in my house to stream music. If I buy the new Airport Extreme Station with 802.11n standard will all my network run at 802.11g?
Or it is possible to connect different devices at different speed?
For example: if I connect to my network an AppleTV, a core2duo 24'' iMac (802.11n) and a G4 powerbook (802.11g), will the iMac run at 802.11g, too?
Thanks.

without actually using one it is hard to say for sure. Most wireless routers that i have used have an option to broadcast wireless B only, Wireless G only, or Both. I would assume that would also be the case with the Airport Extreme. The biggest downfall of the Extreme is not having 10/100/1000 Ethernet ports (only has 10/100)

Similar Messages

New Airport Extreme to replace an older one

Hi, I just looked back through many weeks of this group and did not see my situation. So this is my question: Is it a matter swapping out the cables from the old Extreme and putting the new one in its place? And then using Airport Utility from the supplied CD to configure the new Extreme to my existing network? The instructions seemed to imply that I had to set up a new network so I am just a little confused. Thanks for your help

Welcome to the discussions!
+Is it a matter swapping out the cables from the old Extreme and putting the new one in its place?+
This should work fine
+And then using Airport Utility from the supplied CD to configure the new Extreme to my existing network?+
Yes, you will need to install AirPort Utility on your computer from the CD and configure your network
+The instructions seemed to imply that I had to set up a new network so I am just a little confused.+
Since you have a new AirPort Extreme, you will be setting up a new network, but you could use the same wireless network name, password, etc that you used on your previous network. Or, you can establish a new network name and new password.

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

New AirPort Extreme will not connect to internet

Purchased AirPort Extreme to replace older D Link 655 router. All of my Apple gear has been plug and play except this
Extreme router. I cannot get an internet connection to save my soul. I tried connecting thru both my MacBook Pro and my HP Pavilion dv6. I just assumed I could move the ethernet cord from the DIR-655 to the AirPort and all would be fine. Not so. I have reset, unplugged and restarted so many times I lost count. Nothing works. What am I doing wrong. I even swapped out at store where I bought thinking I had defective router. any ideas? My wife works from home and I really need a better router with greater reach and thought this was it. Please help.

Simply restarting the modem will not always allow it to reset correctly so that it will issue a new valid IP address to the AirPort Extreme.
Power off the cable modem completely for at least 30 minutes....longer will not hurt. Be sure to unplug the power cord from the back of the modem or unplug the power cord at the AC wall jack. If the modem has an easily accessible battery, pull the battery.
Power off the AirPort Extreme as well.
After the modem power down period, insure that the Ethernet cable from the modem is connected to the WAN "O" port on the AirPort Extreme. Reinstall the modem battery if it was installed previously.
Power up the modem and let it run for 10 minutes by itself.
Then power up the AirPort Extreme and let it run for a few minutes. Check to see if the Internet connection is working correctly now.

New Airport Extreme and Older Airport Express No Longer Works

I recently bought a new Airport Extreme base station. Now the Airport Express that I've had for a number of years no longer works, flashing amber. It shows up under the Wi-Fi icon in the menu bar, but when I try to follow Apple's instructions for configuring it, I get this message:
"This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support."
I then tried downloading and installing Airport Utility 5.6 on my MacBook Pro (running OS X 10.7.4) and received this error message: "AirPort Utility can't be installed on this disk. The version of Mac OS X on this volume is not supported."
I then turned to my IPad, which also detected the Airport Express under Wi-Fi Settings but returned a message when I tried to set it up that the Airport Express couldn't be set by this software and re-directed me to the support web site.
While we have an Apple TV unit, I used the Airport Express to stream music directly to our stereo from my MacBook and IPad and Phone and would love to be able to continue to do so. Has anyone found a workaround for this problem, or will I be forced to buy a new Airport Express as well?
Thanks for any help you can offer,
Steve

I then tried downloading and installing Airport Utility 5.6 on my MacBook Pro (running OS X 10.7.4) and received this error message: "AirPort Utility can't be installed on this disk. The version of Mac OS X on this volume is not supported."
I just tried this on my MacBook Pro running 10.7.4 and had no problems downloading and installing AirPort Utility 5.6 for Mac OS X Lion
AirPort Utility 5.6.1 will not install on a Mac running Lion....only Snow Leopard or Leopard.
Can you check again to make sure that you are trying to install 5.6 and not 5.6.1?

Proper way to mix new Airport Extreme with Airport Express, wired and wirel

I currently have several macs. Two of them have 1000 airport (macbook pro and macpro), the other 3 have 100 speed.
I have one Airport Express I'm using now. I'd like a faster setup though.
Here's how I've got it wired up now:
1. I go from my cable modem into a 10/100 Linksys wired router
2. A Net gear 10/100/1000 4-port switch is hooked to the router
3. My airport Express is hooked to the switch
4. my 4 other macs then are hard wired with regular ethernet cable to the switch.
So, my wireless is only for the device(s) that need it, and all other macs go through wires to the switch.
Now, I want to buy a new Airport Extreme to increase my wireless speed when copying files and sharing my iTunes library.
Will having the Express on the network make the Extreme jump down to 100 speed? Or, should I buy a new router, a 10/100/1000 router, and just plug the new Extreme right into it, thereby separating it technically from the slower Express/wired stuff?
I guess I won't even need the Express anymore unless I use it for my older macs that don't have the new n speed airport cards, right?
any insight would be helpful, I'd hate to buy stuff I don't need, and vice versa.

Please try taking the readings again using iStumbler's Inspector feature (select Edit > Inspector from iStumbler's menu) to determine the Signal-to-Noise Ratio (SNR) at your iMac for the following two cases:
o Case_#1: Just the AEBSn. (Temporarily unplug the AX for this reading.)
o Case_#2: When the network is configured for WDS.
Within the Inspector, on the Properties tab, note the values for "signal" & "noise" for each of these cases. These values should be negative.
SNR is the signal level (in dBm) minus the noise level (in dBm). For example, a signal level of -53dBm measured near an access point and typical noise level of -90dBm yields a SNR of 37dB, a healthy value for wireless LANs.
SNR Guideline
o 40dB+ SNR = Excellent signal
o 25dB to 40dB SNR = Very good signal
o 15dB to 25dB SNR = Low signal
o 10dB to 15dB SNR = Very low signal
o 5dB to 10dB SNR = No signal
For Case_#1, if the SNR is 20+dB, you may consider not using a WDS as this SNR value would represent decent Wi-Fi performance at your iMac's location from the AEBSn alone. If it's less than 20dB, then the WDS would be required. ... and, if this is the case, you would want to place the AX within the 20+dB range of the AEBSn to make sure it has the strongest signal to repeat.

Do older basestations and express downgrade the speeds of the newer Airport Extreme?

In the past a device on an Airport network running at a slower speed would downgrade the entire wireless network.
I just purchased a New Airport Extreme. I also have an older Airport Extreme (g) and n Airport Express on my network.
My question is, are these devices downgrading my network speeds?

The new AirPort Extreme is dual-band, which means it simultaneously broadcasts a new (n) network and an old (b/g) network. Devices on the old network will not slow down devices on the new one.
http://www.apple.com/airportextreme/features/frequency.html

Does new Airport Extreme slow down when used with Airport Express?

Maybe this is self-evident.
If get the new Airport extreme and use an old airport express to extend it, will signal slow down to the old speed?
Does the AE have a greater range? Perhaps I don't need the Express to extend.
I live in NYC and there are so many signals in the air. It seems like having the additional airport helps keep me connected.
Thanks.

The airport express is g technology not n technology, so it will be at least as slow as your old network. Also, I'm not sure but I think the the range will be a bit longer than with the old g system, but does not have the full potential of an n system.
I've set up my new system but none of my machines are n capable. I extended the system using my old expresses. The speed of the system is no greater than what it was before the n.
I bought the system to upgrade my technology because everytime my Applecare runs out, I get a new computer which isn't too far down the road. I've purchased an Apple TV which will also work better with the n technology when I upgrade. It's either buy it now or buy it later. I'm also hoping that some third party like Belkin will develop a PCIX card to provide n technology to those of my computers that aren't currently n capable. I'm sure there is many like me out there.

Old Airport Express, New Airport Extreme, Air Tunes - No joy

I'll try to be brief:
Have a Mini, that was running 10.3, and using an old Airport extreme to enable Air Tunes to a stereo in another room. All was well.
Updated the Mini to Leopard. Installed a new Airport Extreme. Did this so a new Macbook in the family could have a wireless internet connection. The new Macbook sees the new Airport extreme and is happy.
Open iTunes on the Mini, try to Air Tunes the music to the stereo.... No joy. iTunes says it can't find the Airport Express.
So I begin a LONG string of stuff to try to get the Express to be seen by something, anything...
Failing all attempts, I do a factory reset. The express now wants a password, won't take "public", does take the old password (which you would think would not be the case with a factory reset), but after churning a while the set up utility tosses and error that it can't connect. I even hooked the little buzzard up to the Extreme with a cable. Can't configure the Express.
Tried updating the Express's firmware. (its on 6.1). The updater sees it, but fails when trying the update.
Any suggestions would be helpful.

Did you try hooking it up with your mini (with cable)?
Richard.

New Airport Extreme running at 80kps on 4MB/sec ADSL line

Hello
I would welcome any suggestions on the following problem. I have recently purchased a new airport extreme to replace an old Dlink 11mbps wireless router attached to an ADSL modem on a 4MB/s line. I have a 6 month old iBook and a new MiniMac both running Tiger and I have the latest drivers and firmware on the computers and the Airport base station.
By introducing the airport extreme I was expecting a small increase in speed (2 x?) but I find the Airport extreme network running more like an old dial up modem (measured at 80kps). I have tried moving the base station around (even standing it next to the mini Mac) I have tried with and without encryption, I have tried all 13 channels and running the airport at 54 and 11 mbps. Replacing the new airport extreme back with the old Dlink unit makes the network run like it always used to before the upgrade.
If anyone can think of some solution I would be most grateful.
Thanks
Konrad

Well, after another call with Apple support and the engineers, no success. After spending over 20 hours trying to debug this, I give up. Apple was basically fishing for a solution with trial-and-error settings on the iphone. Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
25 hours of my life I'll never get back.
Big bummer, and frustrating for all the obvious reasons.

I own an imac 2011 running osx 10.6.8. I want to the new airport extreme. but it says in the system requirements that it needs osx lion 1.7.5 or later. would it work with my older osx 10.6.8?

i own an imac 2011 running osx 10.6.8. I want to buy the new airport extreme but it says in the system requirements that it needs osx lion 10.7.5 or later. would it work with my older osx 10.6.8?

In order to set up and install the new AirPort Extreme:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
would it work with my older osx 10.6.8?
Yes, if you set up the new AirPort Extreme using the guidelines above. The 10.6.8 Mac will be able to connect to the AirPort Extreme, but it will not be able to make any configuration changes.
Only the devices listed above can be used to set up and make any changes to the new AirPort.

Do I need to get all new hardware to enjoy benefits of New Airport Extreme 802.11ac protocol?

Do I need to get all new hardware to enjoy the benefits of new Airport Extreme 802.11ac protocol?

You will need hardware capable of using 802.11ac, which at present is limited to the new MacBook Air models.

My old Time capsule was not working well. I replaced it with a new Airport Extreme. Now I can see the other airport express stations. I tried resetting them, but it did not work. What do I do?

I replaced my old time capsule with a new airport extreme. I have 3 airport express stations that I have all around the house. (2 1st generation, 1 second generation). I can't see them with airport utility. I tried resetting, but no luck. Any suggestions?

Bring all the express to the same room as the mac you are using to setup the network..
One by one, plug them in and do full factory reset on them.. they should then show up in the Airport utility as Other Wi-Fi devices (1) and you can select them and continue the setup.
If that fails try using the airport utility on ipad or iphone as they are far less problematic than Yosemite in particular.

I have a new Airport Extreme and an old airport express. I am getting an amber light on the new Extreme and a green light on the Express. I have internet no problem but the status light is blinking amber

I have a new Airport Extreme and and old airport express. I am getting an amber status light on the Extreme and a green light on the Express. The Extreme is blinking amber all the time.
I have internet and everything seems to be working.
I have reset and pulled the power cord on both the extreme and the internet block
How do I make it Green?

If things seem to be working OK, but the amber light is flashing......the AirPort Extreme has a message for you. To see what that might be......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon
Click on the amber dot in the small window
It might be a message that a firmware update is available for your AirPort Extreme.

CAN"T EXTEND RANGE OF NEW AIRPORT EXTREME WITH OLD AIRPORT EXPRESS

Hello Everyone,
I am having a heck of a time getting my new network setup with this new 802.11n Airport Extreme... Here is what I currently have going on:
I have a G5 1.8 it is my main computer and in ROOM #1... Connected to it is my NEW AIRPORT EXTREME via an Ethernet cable to one of the available ports. Also connected to the NEW AIRPORT EXTREME is my CABLE MODEM... This works great, It is setup and I have internet via Ethernet... I CAN EVEN CONNECT IN ROOM #2 with a PC and an Apacer wireless adapter...
Here is the problem
When I try to add an Airport Express V6.3 to extended the range of my network it can NEVER seem to connect to the network. I have checked the option to allow extension of the NEW AIRPORT in AIRPORT UTILITY and tried both with WEP security and with NO SECURITY... I cannot get the Express to extend the range of my network period... It has an error when joining the network???
Can Anyone Please Help Me?
PS. The reason to extend the network is so I can use the Notebooks in ROOM #3 and so a TIVO can see the Network! It is not far away!
G5 1.8 (2003) Mac OS X (10.4.8)

Also am having problems with my roomates HP Laptop... It connects for only a few seconds/minutes then has an issue... Really shady??? Any Ideas? He is Running Windows XP
G5 1.8 (2003) Mac OS X (10.4.8)

New Airport Extreme + Express. Will all run at 54Mbps?

Similar Messages

Maybe you are looking for