New Airport Extreme running at 80kps on 4MB/sec ADSL line

Hello
I would welcome any suggestions on the following problem. I have recently purchased a new airport extreme to replace an old Dlink 11mbps wireless router attached to an ADSL modem on a 4MB/s line. I have a 6 month old iBook and a new MiniMac both running Tiger and I have the latest drivers and firmware on the computers and the Airport base station.
By introducing the airport extreme I was expecting a small increase in speed (2 x?) but I find the Airport extreme network running more like an old dial up modem (measured at 80kps). I have tried moving the base station around (even standing it next to the mini Mac) I have tried with and without encryption, I have tried all 13 channels and running the airport at 54 and 11 mbps. Replacing the new airport extreme back with the old Dlink unit makes the network run like it always used to before the upgrade.
If anyone can think of some solution I would be most grateful.
Thanks
Konrad

Well, after another call with Apple support and the engineers, no success. After spending over 20 hours trying to debug this, I give up. Apple was basically fishing for a solution with trial-and-error settings on the iphone. Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
25 hours of my life I'll never get back.
Big bummer, and frustrating for all the obvious reasons.

Similar Messages

AIRPORT EXTREME RUNNING EXTREMELY SLOW., AIRPORT EXTREME RUNNING EXTREMELY SLOW.

why is a brand new airport extreme running extremely slow. Worked fine before the firmware update.

I nearly fainted when I just read your post. I bought the new airport extreme on June 24, 2011, just as the store was closing -- 8:45 PM. At home it worked well right out of the box, but the next morning it has been nothing but trouble. I wracked my brain to figure out what could change overnight, and your suggestion that it was updated by firmware is logical. Oddly, it works well with my desktop, which is less than two feet away (I don't use ethernet), but in the next room over it is fast only sporadically. I replaced the prior extreme because it suddenly quit, and the genius spent some time diagnosing it and concluded it no longer worked.

I want to replace a four year old Time Capsule for a new Airport Extreme, how difficult is it?

I want to replace a four year old Time Capsule for a new Airport Extreme, how difficult is it? The ADSL connection come from a Modern Router provide by the local Telephone company.

Reply back when you get the new device, but in short, you'll have to put your extreme in bridge mode and just connect the same wires as your current TC.
See here http://www.macobserver.com/tmo/answers/how-to-add-a-time-capsule-or-airport-extr eme-to-an-existing-network-with-br

I own an imac 2011 running osx 10.6.8. I want to the new airport extreme. but it says in the system requirements that it needs osx lion 1.7.5 or later. would it work with my older osx 10.6.8?

i own an imac 2011 running osx 10.6.8. I want to buy the new airport extreme but it says in the system requirements that it needs osx lion 10.7.5 or later. would it work with my older osx 10.6.8?

In order to set up and install the new AirPort Extreme:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
would it work with my older osx 10.6.8?
Yes, if you set up the new AirPort Extreme using the guidelines above. The 10.6.8 Mac will be able to connect to the AirPort Extreme, but it will not be able to make any configuration changes.
Only the devices listed above can be used to set up and make any changes to the new AirPort.

New Airport Extreme + Express. Will all run at 54Mbps?

Hi,
I have some Express base stations in my house to stream music. If I buy the new Airport Extreme Station with 802.11n standard will all my network run at 802.11g?
Or it is possible to connect different devices at different speed?
For example: if I connect to my network an AppleTV, a core2duo 24'' iMac (802.11n) and a G4 powerbook (802.11g), will the iMac run at 802.11g, too?
Thanks.

without actually using one it is hard to say for sure. Most wireless routers that i have used have an option to broadcast wireless B only, Wireless G only, or Both. I would assume that would also be the case with the Airport Extreme. The biggest downfall of the Extreme is not having 10/100/1000 Ethernet ports (only has 10/100)

New Airport Extreme works fine with everything except my husband's Toshiba running Windows 7

I have no idea how to fix this problem. He scanned his computer (Windows 7) for viruses, and nothing came back. He deleted our home network from his laptop, then added it back.
His computer shows that he has "limited access" to our home network and NO internet access. It also shows he has four bars, so he has a good signal. Four other people in the house using macs, ipods, ipads, and kindle fires aren't having an issues.
Is the problem with his laptop or with my new Airport Extreme? We upgraded from a very old version (I think it was the 1st one), he never had a problem with the old Airport Extreme. He actually didn't have a problem with the new one until about a week after I had it up, which makes me think the problem is with his computer?
His Toshiba has no problem connecting to his Verizon mifi.
Could someone please offer me some advice?

I think I may have solved my own problem. I read somewhere online that he needs to hit his "F2" button. He hit it and his computer hooked right up to our network. Previously, we would have to restart Airport Extreme and his computer so he could connect. Even doing that the connection would last between five minutes and two days.
Very strange. Hopefully problem solved. Time will tell.

After we installed a new airport extreme, the imac running snow leopard displays black box msgs saying to hold down the power button and or the reset button and then restart your computer. Can anyone provide info that can help resolve this issue?

Experiencing similar issues on both imac and power book: after replacing an original airport extreme with a new airport extreme both computers display a black box msgs that reads: "...turn off your computer by holding down the power button and or the reset button for a few seconds and then restart your computer."...
one of the printers are usb'd to the imac. The printer is not "seeing" the imac nor will it print wireless from the powerbook which was the norm prior to the upgrade on the airport extreme.
Upon restart, the imac does not "see" the wireless keyboard or the mouse until it is "found" again.
At this time the imac or the powerbook can get on line.

It sounds like your computer is getting Kernel Panics. Please look at About "You need to restart your computer" (kernel panic) messages and if the message seen on your display is like the one in the link then you have confirmed you had a KP. KP's can be tough to track down because they can be caused by software or hardware. The first place to start is to post the complete crash log so we can look at it, often there are clues in the log. You can find it at:
/Library/Logs/DiagnosticReports

I just purchased a new airport extreme 802.11ac I set it up and runs fine when i put my mac to sleep i come back and it can not find my airport i have to restart

I PURCHASED THE NEW AIRPORT EXTREME 802.11AC I SET IT UP AFTER I PUT MY MAC TO SLEEP I COME BACK AND IT SAYS CAN NOT FIND AIRPORT EXTREME I HAVE TO RESTART AND IT FINDS IT.

Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

New AirPort Extreme backwards compatible with old Mac?

I have an old airport express from around 2004 and I made the mistake of upgrading directly from snow leopard to mountain lion. Subsequently I have been living with having to re enter my long WEP key every time I turn on my computer because of an incompatibility issue between the airport and my 2010 iMac. I want to get an AirPort Extreme to end this issue as well as increase the distance my computer and other wifi devices can be away from the base station.
The problem is that my parents have what i believe to be a 2006 intel iMac. I know the utility software for a new airport won't run on their old iMac. That's fine because I can run it on mine.
My question is, would my parent's old iMac have issues connecting to a network running on a new AirPort Extreme?
Thanks!

No, there would be no issues as WiFi is a standard.

New Airport Extreme, internet on some devices, not others

To All:
I bought one of the new Airport Extreme routers (the verticle model) for my home wifi system yesterday and installed it. Although the performance is obviously much better on those devices that have been able to connect to the system, I have only been able to consistently connect with three out of the eight devices in our home. All of the devices "see" the network, they just can't connect. When you try to connect the device seems to go into a feedback loop where you can see it transmitting and receiving information, but nothing happens. A census of the devices is as follows:
1 2007 Mac running Mtn. Lion ver: 10.8.4 (connects, that is what I am writing this on)
2 ipads both running system 6.1.3 (10b329), (one connects, the other doesn't--the one that connects I upgraded the system software yesterday)
2 iPhones, 1 iphone 4s running 6.1.3 (10b329) which connects, 1 iphone 3 (unknown software) which does not connect
2 Windows laptops, 1 running Windows 7, 1 running Windows 8, neither connect
Xbox, doesn't connect
The system that I have is a modem that comes off of a high speed wireless (WiMax type of service) antenna that directly connects to the Airport router which is on the main floor of the house with very good signal strength throughout our home.
I have searched many message boards and tried all of the "wifi tricks" for getting the system to run including:
Disconnecting and rebooting devices in sequence
Renaming network and establishing new passwords
Renewing the DHCP lease
Upgrading OS software to current versions (this computer and one iPad
Can anyone help me with this problem?
Regards,
Garet

Hi there otsegony,
You may find the article below helpful.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
-Griff W.

New Airport Extreme Set Up Issues

I purchased a new Airport Extreme 802.11n Wi-Fi Wireless Base Station today. I followed the instruction and set it up. My problem is I can not get the networking capability across my family members machines.
My set up is that I have Two Compaq PCs running Windows XP connected via ethernet to the AEBS and I have a Third Compaq PC connected wirelessly. They all can see the network and are getting an IP addreess assigned by DHCP (10.0.1.199, 10.0.1.200 and 10.0.1.197). The problem is they can't see each other when I try to visit workgroup (All have same workgroup name 'MSHOME') computers or the USB printer I have plugged into the AEBS. I have been at this for 4 hours reading posts / rebooting PCs & AEBS and changing setting with no luck. Any help wouldbe greatly appreciated.

I have gotten the Printer on the USB connection work thru the Bonjour connection. Still have not been able to view my PCs on the Network or in the Workgroup still.

Open ports on new airport extreme to play online games

hey, i have the new airport extreme and i wanna play online games.
how do i open ports with the utily that came on disk.
i have no clue how to configure it.
i tried in bridge mode, but than the airport starts flashing amber and other users in house wanna surf on the net aswel.
kind regards

Airport Utility -> Manual setup (Cmd+L)
Internet -> NAT
Enable a default host
Then in Internet -> DHCP
permanently assign the default host IP to the machine you're going to play the games on.
This is what other routers call the "DMZ" address. Be sure to run a firewall on that machine!

Help!?! Can't read configuration of new Airport Extreme, Help!?! Can't read configuration of new Airport Extreme

Trying to set up to print with MacBook Pro, OSX 10.5.8, Canon MX870 series printer, and NEW AirPort Extreme. I get the message that "an error occurred while reading the confirguration (-6753)" At wit's end... tried using ethernet cable connection- MacBook Pro to Airport Extreme... same message. That was the suggestion from the Express Lane tech. That perhaps our WiFi at our physical location was interferring. Have tried ethernet cable to Airport... same. Also tried USB cable... same message. Used same MacBook Pro and Canon printer a year ago, but with an older Airport Extreme, and it worked perfectly... wirelessly. HELP please, please

Also am having problems with my roomates HP Laptop... It connects for only a few seconds/minutes then has an issue... Really shady??? Any Ideas? He is Running Windows XP
G5 1.8 (2003) Mac OS X (10.4.8)

Setting up New Airport Extreme with Verizon Fios Actiontec MI-424-WR Modem

I just purchased the new Airport Extreme to run my network at home. My internet provider is Verizon Fios. With their installs, they use an Actiontec MI424WR modem/router. I would like to disable the router part of the Actiontec and use the AEBS for my router. Any advice on how to accomplish this? Thanks.

ufbrad24, Welcome to the discussion area!
FiOS does not require a modem. The Actiontec device is a router only.
You could replace the Actiontec completely with the AirPort Extreme base station (AEBS). Many have discovered that this can be done by a quick call to Verizon.

New Airport Extreme running at 80kps on 4MB/sec ADSL line

Similar Messages

Maybe you are looking for