New Airport Extreme (vs Dec 06 model - 54 Mbps)

Bought an Airport Extreme (54 Mbps) two months ago and only last week the new model (which is supposedly faster) has been released.
Yet apart from appearance, I can't see what the real difference is.
Q: is it worth returning the old Airport for the newer model? I only intend to run Apple TV and my laptop through the Airport.

hi Ro.bear:
This is the iMovie HD Forum...we just make movies here.
You might want to repeat that question in the Airport Extreme Forum:
http://discussions.apple.com/category.jspa?categoryID=140
Sue

Similar Messages

  • New Airport Extreme -802.11 ac model is not detecting my USB Hard drive

    My new Airport Extreme -802.11ac model is not detecing my External USB HDD when connected via the USB port in the Airport Extreme.
    I'm using a Seagate USB HDD 3TB, and it's working when i connect my previous generation Airport Extreme router.
    Looks like the new version is not detecting my HDD.
    Please help.
    Cheers
    SK

    What version of firmware are you running on the 802.11ac?
    There is a 7.7.1 update with USB fixes - http://support.apple.com/kb/DL1665
    After my update to 7.7.1, I still cannot see the Seagate 3TB HDD.
    The disk works on a 2nd Gen 802.11n Extreme.
    This is

  • New Airport Extreme, internet on some devices, not others

    To All:
    I bought one of the new Airport Extreme routers (the verticle model) for my home wifi system yesterday and installed it.  Although the performance is obviously much better on those devices that have been able to connect to the system, I have only been able to consistently connect with three out of the eight devices in our home.  All of the devices "see" the network, they just can't connect.  When you try to connect the device seems to go into a feedback loop where you can see it transmitting and receiving information, but nothing happens. A census of the devices is as follows:
    1 2007 Mac running Mtn. Lion ver: 10.8.4 (connects, that is what I am writing this on)
    2 ipads both running system 6.1.3 (10b329), (one connects, the other doesn't--the one that connects I upgraded the system software yesterday)
    2 iPhones, 1 iphone 4s running 6.1.3 (10b329) which connects, 1 iphone 3 (unknown software) which does not connect
    2 Windows laptops, 1 running Windows 7, 1 running Windows 8, neither connect
    Xbox, doesn't connect
    The system that I have is a modem that comes off of a high speed wireless (WiMax type of service) antenna that directly connects to the Airport router which is on the main floor of the house with very good signal strength throughout our home.
    I have searched many message boards and tried all of the "wifi tricks" for getting the system to run including:
    Disconnecting and rebooting devices in sequence
    Renaming network and establishing new passwords
    Renewing the DHCP lease
    Upgrading OS software to current versions (this computer and one iPad
    Can anyone help me with this problem?
    Regards,
    Garet

    Hi there otsegony,
    You may find the article below helpful.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    -Griff W.

  • Help setting up Open DNS with new airport extreme

    I cant seem to get Open DNS to work with a new airport extreme. The status says I am not using Open DNS and its not filtering anything. I have followed the exact steps for set up listed on their website, checked the dns settings, cleared both caches and restarted the computer, modem and router with no success. I set the airport up in bridged mode, although I tried the other option under setup, but not sure what I was doing? I picked up this router because I wanted easy set up and the apple store assured me it would work with Open DNS. Oh, and I also downloaded the latest firmware update on the router. Can anyone help me with the settings or what else I need to check?

    Sorry, I am not familiar with this product, so I checked online to pick up some information.  Here I am referring to the information found here:
    http://www.dslreports.com/faq/6096
    I found that your device is mentioned as follows in the intro under Section 1 of this document:
    The BellSouth supplied Westell 2100, 2200 and 6100 models (Models A90-210030-04, B90-220030-04, and B90-610030-06/C90-610030-06, respectively) share many features and functions.
    Next, I am referring to the information under Section 2, under the heading of Standard Default Mode Connection (separate hub or switch present).  Unless you have changed the configuration on the Westell, this is how your device is operating. In this mode, the Westell device is acting both as a modem and router in one unit.
    So, an attached router (AirPort Extreme) must be configured as a switch to work correctly. That is what Bridge Mode is....the AirPort Extreme is operating as a switch when it is in Bridge Mode (which would be the correct setting to use when the Westell is set to its Standard Default Mode).
    Any changes that you want to make regarding DNS settings would need to be made on the Westell device, since it is acting as the main router on your network.
    In Bridge Mode, the AirPort Extreme simply passes that information through to its connected devices. You will not be able to make any DNS related changes on the AirPort Extreme since it receives that info from the Westel device. Some service providers force you to use their DNS servers, so you might want to check with Bell South or AT&T for more information in this regard.
    If you want to be able to configure the AirPort Extreme as the main router on your network, and instruct it to use the DNS information that you want, you will need to refer to the section under the heading of Bridged Ethernet Mode ( separate router present).
    Please note that the first item under this heading specifies that "This is the preferred configuration when using a separate external router..." (which would be the AirPort Extreme in your case)
    So, it appears to me that this would be the way that you must reconfigure the Westell device to allow the AirPort Extreme to function as the "main" router on your network. In this type of setup, you will be able to enter the DNS information that you want to use under the setup for the AirPort Extreme and it will act as you instruct.
    The AirPort Extreme would not be configured in Bridge Mode for this....it would be configured to "Share a public IP address".
    The next item in the article specifies that you "Must use a PPPoE client on the Router." This means that the AirPort Extreme would be configured to Connect Using = PPPoE as follows:
    AirPort Utility - Manual Setup
    Click the Internet icon
    Click the Internet Connection tab
    Connect Using = PPPoE
    You would enter your user name (probably your email address), password, etc in this area. Leave the Service Area box completely blank. Set Connection to Always On, and Disconnect if Idle to Never
    Click Update to save the new settings. Power off the Westell device after this and then restart it so that it will pick up the new information that you have programmed into the AirPort Extreme.
    I want to stress that this is how I would try to configure the Westell and AirPort Extreme. But, as I said, have not used a Westell device, so I cannot say that this will work correctly for you.
    It might be an excellent idea to contact Bell South or AT&T Support to ask for their opinion on this before you decide to change the configuration of the Westel device and the AirPort Extreme.
    This type of thing can be intimidating for users, so you might elect to use the services of someone like the Geek Squad at Best Buy, or a similar service from a local computer firm. Perhaps the Apple store could help as well.
    If it is not critical that you use Open DNS, you might want to simply leave things "as is", with the AirPort Extreme in Bridge Mode.

  • New Airport Extreme only connected with N protocol

    I just got a brand new Airport Extreme. I disabled wifi on my verizon fios router, plugged in the ethernet, and went through the Airport's setup. I'm connected on all my devices and the range is so much better, but it doesn't seem like my MBP has connected using AC. Below, I have included some information about my computer and the router. Could anyone advise me on how to connect using AC? Do I need to do anything other than the default setup? I noticed in advanced options on the router, that 5ghz is not enabled by default? Also, I'm sitting about 10 feet from the router with no obstructions.
    My Computer:
    Model Name: MacBook Pro, Late 2013
      Processor Name: Intel Core i7
      Processor Speed: 2.3 GHz
    My Airport Extreme:
    Card Type: AirPort Extreme  (0x14E4, 0x134)
    Firmware Version: Broadcom BCM43xx 1.0 (6.30.223.154.65)
    Locale: FCC
      Country Code: US
      Supported PHY Modes: 802.11 a/b/g/n/ac
    My Network:
    Network Utility Link Speed: 217 MBit/sec
    PHY Mode: 802.11n
      Channel: 1
      Country Code: US
      Network Type: Infrastructure
      Security: WPA2 Personal
      Signal / Noise: -41 dBm / -92 dBm
      Transmit Rate: 156
      MCS Index: 21

    5ghz wireless is in fact working.. but the Mac is setup to connect to the strongest signal not the fastest.. so you have actually connected to 2.4ghz N wireless..
    The way to fix this is simple.. change the wireless name for 5ghz in wireless options of airport utility.. ie.
    Make the name short and sweet.. no spaces.. no apostrophe.. just simple.
    Mine doesn't show as much because I refuse to buy the AC model..
    But you can make sure your country is set correctly.. and all the rest can be left on auto.
    Then in the laptop force the connection to AE5ghz or whatever you name it.

  • New airport extreme network very slow

    I just bought the latest AE base station dual band, but am having trouble with the speeds. We have on the network:
    1 macbook pro, 1 windows pc, 2 ipads, 1 ipad mini, 1 kindle fire, 2 iphones, 2 ipods (wow we have a lot of products I just realized now that I am writing them all down) a Wii console and 1 mac desktop computer. Oh and I have an airport express in another room set up to extend the netowrk.
    Not all of them are on the network simultaneously.
    Using the Airport utility (windows version) I have set up the network trying different configurations. Currently I have it set up as:
    Radio mode: automatic
    Radio channel selection: automatic
    wireless security: WPA2 Personal
    network options are 5 Ghz is unchecked
    country is US
    multicast rate: low
    transmit power: 100%
    WPA Group Key Timeout: 2 hours
    use wide channels is checked
    All devices can connect to the net, but speeds are at old dial up levels and that of course was NOT my intention in getting the latest router.
    Any advice from those who understand things like multicast rate?

    You either have a defective base station, it is not set up properly, or there is some form of Wi-Fi interference that is preventing your new AirPort Extreme from providing a clean signal.
    What make & model was the router that you are replacing with the 802.11ac AirPort Extreme?

  • Time Machine doesn't see new AirPort Extreme

    My old Time Capsule died. Hardware failure. Too bad. So I bought a new one, a 2TB AirPort Extreme. 'Upgraded' to OSX 10.9.1 (which crippled a lot of my software, and seems generally more buggy & slower than 10.6.8, but that's beside the point) just to be able to administer it. Setting up the WiFi network was easy. Fine.
    Now when I go into Time Machine preferences and click on the "select backup disk" button, the new AirPort Extreme is not listed. There is an option for "Other Time Capsule." If I click on that, the AirPort Extreme shows up. OK. If I click on it, I get a window with IP info, etc. There's an option to "edit". Clicked on that but found nothing about setting up the Time Capsule. I tried clicking on the disks tab, but that returns an empty list of partitions and file-sharing options. 
    I tried reseting the device with the little button on the back and starting again. Same story. What am I missing?
    To be clear, I am not trying to use an external disk. I am trying to use the 2TB disk I am told is inside the AirPort Extreme.

    Is it possible to know from the serial number whether I have a misbehaving Time Capsule presenting itself as an AP Extreme, unaware of the hard disk it conceals, or a perfectly functional AP Extreme?
    That would be a question for Apple Support.
    http://www.apple.com/support/contact/
    If you can locate a model number on the device....it might be on the bottom in very small print.......it will start with an "A" followed by four numbers.....we can tell you what you have.
    But a clue might be that an AirPort Extreme sells for about $200.  A Time Capsule sells for $300-400 depending on the size of the internal hard drive.
    And to anyone from Apple reading this, could you please make your new software compatible with hardware you produced in last 3 yrs?
    It is extremely unlikely that anyone from Apple will ever see your post on a user-to-user support forum.  Best to contact Apple directly with your comments:
    Apple - Time Capsule - Feedback

  • PROBLEM with new Airport Extreme

    i just bought the new airport extreme and what was supposed to be a simple setup process has taken longer than 10 hours!
    please help!
    i have 3 computers.
    2 are macs, they will be using wireless. 1 is a PC, which will be wired to the airport extreme.
    the airport extreme is connected to a VOIP router, which is then connected to the DSL router.
    i have always used my old airport extreme without issues, but because i want to connect the PC as well, i must ditch the airport express in favour for one with LAN ports. hence, the troublesome airport extreme.
    it doesn't work.
    none of my computers can recognize the new network. (even though i've established one, with passwords and everything)
    the router flashes amber - internet works, but not wireless.
    the router periodically flashes green - ironically, nothing works then!!!!
    please help!!!
    EDIT: DIAGRAM
    1. WHEN IT WORKED:
    INTERNET --> PROVIDER ROUTER --> VOIP ROUTER --> AIRPORT EXPRESS --> MAC 1, MAC 2 (WIRELESS)
    2. WHEN IT DOESN'T WORK:
    INTERNET --> PROVIDER ROUTER --> VOIP ROUTER --> AIRPORT EXTREME --> MAC 1, MAC 2 (WIRELESS), PC (WIRED)

    It appears to me that you may possibly have sever conflict issues as well as maybe not having the Network confiqured correctly.
    I have a 3 story OLD VICTORIAN and I am using the Old Airport Extreme Base and have expierianced NO PROBLEMS at all.
    If I may suggest a different approach.
    Try to start from scratch.
    SHUT EVERYTHING OFF.
    Run an ethernet cable from your Internet Service Providers MODEM to the WAN port of the Airport Extreme Base
    Set it up DHCP and you want the Airport to distribute IP's
    use the Airport setup assistant and Airport Admin Utility.
    Using 2 Routers in the mix unless you have ony one the main to distribute the IP's, IF you have 2 Routers and they are both set up to distribute the IP's there is your problem.
    The New Airport Extreme Base is far better then the older model and you shouldn't need another router in the mix at all to get the coverage of your entire house.
    Take the Netgear clear out and use the Airport Extreme and the Expresses as you had them before. There is a very good possibility that you will need to do evrything one at a time and step by step.
    Do not just plug everything in, and turn everything on and expect it to work. Do everthing step by step with all security disabled to begin with.
    Be sure when you do your system reset that you start by powering up the MODEM 1st and wait for it to acquire the signal before you power up the Airport Extreme and again you must wait for it to acquire the signal. You can use the LAN Ports for anyyhing you need HARDWIRED. If you don't wait and do things in the proper order you will have problems, I can't stress enough that it must be done in the proper sequence. Have a look at the Paperwork of either the Netgear's Yellow Phamplet or the Booklet that came with the Extreme to bear out what I explained on the sequence.
    Don

  • Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router

    Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router
    1. I’m writing from a rural town in Southern Nepal, very close to India. I’m planning to create a new WI-FI network at a small monastery here.  Ideally, we will have two parallel wireless networks: the first network produced by an ADSL router/modem and a second network produced by another router in “repeater” mode.
    2. Earlier, someone suggested that, when I post a question, I should provide as many details as possible about the situation here.  Forgive me if there is “too much information”.  I have to make a trip to the US to buy new networking equipment, so I very much want to get this right.  Once I return here, I’ll be pretty much stuck with whatever I get in the US.
    3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go).  We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging).  Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
    4. If my dreams come true, the second router would be an Apple Airport Extreme (AX).  An Apple router would be ideal because my experience with Apple routers is happy: they are easy to set up, reliable, and secure. Moreover, we use Apple computers and iOS devices here (and the new AX has the “ac” thing which will be preferable as we replace old machines with new ones).
    5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
    6. Our current, super-crappy 2wire 2701hg-t (ADSL modem/router) covers the 100-foot distance without a problem when it is working and there is Ethernet flowing to us.  Frequently, our connection is very bad, and I may be unfairly judging the 2wire 2701hg-t.  But, based on user reviews on the America Amazon.com, the 2wire 2701hg-t is pretty terrible: first it is simply old and second, among other problems, it seems to have a poor quality power supply unit.  I do observe that it frequently seems to be recycling from scratch as if it had turned off and restarted.  In any case, we are replacing it since it may be about 4 or 5 years old.
    7. In previous posts on this forum, “LaPastenague” responded to some of my earlier questions about AX and ADSL.  Among other things, he pointed out that (1) line-attenuation may be contributing to our poor connection and (2) we must choose a modem/router that is suitable for “long lines.”  I’ve looked at our current modem/router statistics page; however, there are no statistics for line-attenuation or noise.  (As you will see below, my strategy is to get the “better” modem/router that is suitable for long lines.)
    8. Concerning our ADSL service, these are the facts I’ve gleaned from looking at the current router’s configuration pages:
    Connection Type: PPPoE
    Currently, the router is configured to use WPA-PSK security.
    Connection Speed: Incoming: 1024 kbps & Outgoing: 509 kbps
    (The following information may be unimportant at this time.)
    Broadband Link Diagnostics:
    DSL Synchronization: UP
    G.DMT Signal: UP
    PVC Connection: UP
    PPPoE Service: UP
    PPP Authentication: UP
    IP Connection: UP
    DNS Communication: UP
    9. The ISP (Nepal Telecom) doesn’t supply a modem/router; however, they do have a list of (at times ancient) hardware and hardware vendors:
    http://www.ntc.net.np/internet/adsl/adsl_vendersConf.php
    10. Concerning what equipment is available here, what I have observed is that generally the ADSL modem/routers for sale locally, and in the far-away capital Kathmandu, and in nearby India are often also available in the United States, but they are the cheaper, older models.  I will have to buy the new equipment in the US this year.  At a different institution nearby, they are using the TP-Link modem/router td-w89016 which they purchased locally, I believe.
    11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
    Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described?  That is, connecting the two with a cable and creating two WI-FI networks.
    12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755 
    13. In fact, does connecting them with a cable help alleviate some of the problems that can occur between the Apple device and the ADSL modem/router?
    14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)?  I have heard of the “repeater”, “roaming” , and “bridge” modes.
    15.  Are there two levels of passwords which need to be considered?  Of course, there is the network and network passwords which we create here and which will be different.  But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
    16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
    I think there are a lot of good reasons to use an AX router. Of course, if it is just going to be very cumbersome then, we would be loosing one of the best parts of using Apple products.  So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple.   Apple can rest assured that I will buy other things from them!
    In that case, I’d likely buy a second TP-Link device to create a second network:
    TL-Wa801NP [AP Mode Multi-SSID Mode AP Client Mode Repeater Mode (WDS / Universal) AP+ Bridge mode (point-to-point / point to Multi-point)].
    Thank you in advance. Long live Apple!
    Message was edited by: Jess1911

    I am not sure if there are different interfaces but my 2wire does an excellent job with line info.
    I get into this from browser.. using main IP.. in my case 10.0.0.138/MDC
    In your case it should be whatever the IP of the 2wire is, followed by /mdc
    Give it a try.
    As you can see it shows vendor and loads of info about the line.
    I rate it the best domestic modem for line info.
    A good modem actually albeit a lousy router.
    MDC is the diagnostics and Management Console.
    3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go).  We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging).  Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
    You are not repeating.. you are simply setting up two routers which are interconnected, so one is dependent on the other.. ie one is your adsl modem router and that will take the main router function. Your second router is really not working as a router, but as wireless access point (and switch if you plug things in).
    That is perfectly fine. You are not roaming in this case since both routers are running different wireless names and networks.. but they are actually using same IP range.. all devices are on the one IP network with two different wireless access points.
    4. If my dreams come true, the second router would be an Apple Airport Extreme (AX). 
    Apple router is fine for this. Easy to configure out of the box.
    5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
    The problem arises when you try and interconnect using  wireless extend or repeater.. you are not using wireless to extend, you are using ethernet. Wired has no issues.
    11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
    Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described?  That is, connecting the two with a cable and creating two WI-FI networks.
    It is a good choice.. It should be fine considering how poor your line is.. this modem is proving to have a couple of bugs.. it does not handle torrents well but I would suggest your system is not being used for that purpose. It has some port forwarding issues. Again you are probably not going to overload it. 
    12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755
    Absolutely best.. only decent method. 
    14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)?  I have heard of the “repeater”, “roaming” , and “bridge” modes.
    Bridge. Although if it gives issues there is another method, although rather complex to setup.. not something to worry about now.
    15.  Are there two levels of passwords which need to be considered?  Of course, there is the network and network passwords which we create here and which will be different.  But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
    Only the adsl modem has the ISP authentication.. it is the box that does the link. The TC just piggy backs.
    The passwords on the TC are for its Admin, wireless and disk access.
    16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
    For ADSL you must have the PPPoE authentication username and password.
    So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple.
    hmmm.. I am biased because I see the issues not all the good stories..
    The latest airport and Time Capsule seem to have a few pretty severe bugs.. if they happen to hit you, they are extremely hard to fix if you are in the middle of Nepal. And Apple service centre is a long long way away.
    I cannot answer your question from the point of view of a person on the ground in remote area. If the economics of the purchase works for you, great. Go for it.
    In terms of wireless coverage.. the Asus AC models or Netgear R7000 kill the Apple. Sorry but it is just fact.
    See reviews here.
    http://www.smallnetbuilder.com/lanwan/router-charts/bar/113-5-ghz-dn-c
    That is average.. if you look at the apple router in the worst location by changing the filters, it comes out worse again.
    I cannot post the URL to our local forum here.. (apple doesn't allow it). But in testing with apple clients the asus still beat Apple router soundly.
    Pure wireless range is not the only consideration.. but in a mixed environment and since the wireless on the 8980N is not too bad.. then buy Apple router for apple client devices makes good sense.
    Maybe the older Gen5.. or two of them.. would do a better job.. with a bit more tested and known hardware.
    One thing you do need to check.
    Routers from every other brand allow you to select country. Any country from anywhere in the world. Apple routers do not.
    If you buy an airport in North America it is coded to North America and offers just a few countries.. USA, Canada I suppose.. what else is North America??
    You cannot change it to Nepal.
    To get the one for Nepal you must buy the model that covers, South Asia I guess.. I am not sure which it is.
    See what the license information is for wifi in Nepal as it might be very different to US and therefore illegal for you to run it in Nepal.
    If only the whole world would just bow to America.. we could all follow the FCC regs..
    http://en.wikipedia.org/wiki/List_of_WLAN_channels
    This only applies to the Apple.. the TP-Link etc allows you to choose Nepal or correct country regulations for wifi.
    Buying modems has one tricky bit.. that the actual adsl ATM channel is different in different parts of the world. No modem is usually impossible to setup but some can be difficult if it is pre-configured for US.. this is easy to overcome generally as you can download a firmware for another locality, so you can have local settings.

  • New Airport Extreme (6th Gen) Dropping Connection from Time to Time.

    Problem:
    6th Generation Airport Extreme drops connection intermittently at random times.
    Set Up:
    6th Generation Airport Extreme (main router - no hard drive/not a time capsule) located center of house on the main floor. 2 Range extenders each approximately 30+ feet away from main router. First range extender (Airport Express - newest generation) located on the third floor parallel to main. Second range extender (Airport Express - new generation) is located at the end of the kitchen (main floor).
    Main Router is connected straight from a Motorolla Surfboard modem on a foyer table at the center of the house.
    Range extenders connected to Main Router wirelessly and at wall outlett height.
    Previous Setup:
    Same setup as above but, with the 5th Generation Airport Extreme instead of the 6th Generation.
    Firmware:
    All current versions.
    Devices:
    1 SONY VAIO VGN-FW490J
    HP Notebook G60
    Several WEMO outlets
    1 iPad Mini
    1 iPad 2
    1 iPhone 5
    1 Motorolla RAZR MAXX
    Macbook Pro
    iMac (wired from main router on foyer table)
            Note: All of these routers/range extenders/modem/computers are plugged into surge protected outlets.
    Notes:
    With the new Airport Extreme my family and I have been experiencing intermettent connection drops. The amber light on the main router turns on and within a few minutes turns green and connection resumes again. This has been happening for a few days now ever since I purchased the new router. This has not happened before with the 5th generation router, which I donated to our church.
    I have not exchanged the product yet. I will be initiating a Complete Power Recycle after some suggested solutions in a bit. I have contacted my Internet Service Provider (Comcast) for a line check and found no problems.
    Has anyone found any solutions to resolve the intermittent connection drops? Is reverting to the previous firmware going to solve this?
    I would like some insights before trying to do all this. Thank you all for your time.
    P.s.
    I've done a detailed post since posts like these is frequently asked questions on set-up, devices, connections, etc:

    Update:
    Before I went to exchange my 6th Gen Extreme, I ran through all possible solutions from complete power recycle to no devices connected. I even went out of my way to my cousin's house to test it out. The same problem still kept coming.
    I was able to exchange my 6th Gen Airprt Extreme with another 6th Gen Extreme the other day. I set it up how the instructions told me and within an hour it did the exact same problem as the previous 6th Gen Extreme. I gave up and decided to get the ASUS RT-AC66R (ASUS RT-AC66U is the same, just the 'R' is Best Buy's model.)
    The ASUS router is just as great as the 6th Gen Router. You can actually get it down to $180 by price matching to Amazon. The ASUS router has 3 antennas that you can adjust according to where the signal is used more. I pointed them more towards the backyard, upstairs, and the living room. The range is by far better than the Extreme because of this. I was able to drive down a good block (3-4 houses down) and still connected to my router. Also it has 2 USB ports which was fantastic for me so I can plug in my external hard drive and a non-wireless printer. It has many more features that I really liked that I didn't even know was possible. The router utility interface is a bit confusing at first but, it's pretty easy once you get the hang of it.
    Some features that I liked with the ASUS was the ability to have multiple guest network with time limits. 3 for 2.4gHz and 3 for 5gHz. I think that Airport guest accounts are only allowed 2.4gHz but not a 5gHz. Though I only needed 1 for each but, I can see this working well for businesses.
    Another feature is traffic manager. I am able to set specific bandwith for different types of use such as, high priority 80%-100% bandwith for gaming, medium priority badwith 70%-90% for HD media streaming/data transfer, and 50%-80% low bandwith for casual web surfing. It also has it's own "beamforming" so that data isn't free roamed.
    Lastly it has AiCloud sync which is basically like having a hard drive into your router but, much like having a Dropbox at the same time.
    More or less I think I'll stick with the ASUS router rather than going with the new Airport Extreme. I think that it's more on firmware issue than it is hardware. If you are not willing to switch to another brand and want to keep staying with Apple, I recommend going back to the 5th generation until a new firmware or rebuilt 6th gen extreme is out.
    I have not found any problem with the ASUS router and no intermittent connectivity issues.
    Now I am not trying to make you buy the ASUS router. I'm merely expressing how great the product is.
    I do have 60 days from Best Buy return policy to try out the ASUS (and report of any malfuntions) and if within that time a new firmware is out for the Extreme. I highly doubt I'll go back to the extreme though.
    Hope this helped!!

  • HP Color LaserJet 2500 and new Airport Extreme

    I have tried to connect my HP Color LaserJet 2500 to the new Airport Extreme USB port. Printer setup utility recognizes the printer but when I print I it always errors out. Any work around for this? I have noticed two other postiings for other HP models that are having the same problem. Is this a universal HP problem?

    I have tried to connect my HP Color LaserJet 2500 to
    the new Airport Extreme USB port. Printer setup
    utility recognizes the printer but when I print I it
    always errors out. Any work around for this? I have
    noticed two other postiings for other HP models that
    are having the same problem. Is this a universal HP
    problem?
    Futher information on the printing problem. The GIMP driver works. It is available at http://gutenprint.sourceforge.net/pSupportedPrinters.php3. This may be the answer for some folks with Inkjets or non-color LaserJets. It does not solve my problem because the GIMP driver only provides black and white support. No color.
    Anyone know of an alternative driver that supports color?

  • I have a RCA media streamer that will not connect to my network with a new airport extreme.

    I have a RCA media streamer (Model # DSB872WR)  that will not connect to my network with a new airport extreme.I had to create a new network and  my computers are connected but media streamer will not. Can anyone help? Thank you

    Hi, papineaubill!
    Welcome to The Canon Forums, and thank you for your inquiry!
    We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.  If you live outside the United States, please click here and select your country or region for your support needs.
    Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
    Thanks for choosing Canon!

  • Do I need to get all new hardware to enjoy benefits of New Airport Extreme 802.11ac protocol?

    Do I need to get all new hardware to enjoy the benefits of new Airport Extreme 802.11ac protocol?

    You will need hardware capable of using 802.11ac, which at present is limited to the new MacBook Air models.

  • Extend new airport extreme with 2 additional airports

    Hi,
    Just got a brand new airport extreme (ac model) and this is now my setup:
    1. New Extreme is main router
    2. Older 4th gen Extreme is extending main Extreme
    3. Airport Express N (1st gen) is extending older Extreme
    Things seem to work but when using iStumber for testing (normally what I do) I only see 4 networks not 5.  I do not see a network for my Express although it seems that I have a connection there based on signal strength.  Both extenders have green lights (and of course the main), but I'm a bit confused by this.  I have my network with a different name for 5GHz (didn't realize older Extreme would extend both bands but seems to be the case), but I'm only intending to extend the 2.4GHz band with the Express.  Also funny thing is when I'm near my Express in iStumbler the strongest network seems to be the 2.4GHz band from my main router which should be impossible since I'm too far away.  Unless when being extended now the Express is being masked to appear as my main router?  But this was never the case before when I only had one extender...
    Ok hope this makes sense can someone please educate me on this thanks for your time,
    rc

    I thought you could put more than 2
    You can....but each extender must communicate directly to the main router.  Apple's extend feature works like the hub and spokes of a wheel.
    Your new AirPort Extreme is the "hub". The old Extreme resides at the end of a "spoke", and as such it communicates directly to the "hub".
    You can have other extenders at the ends of other "spokes", but each one of them communicates directly to the "hub"......not to another extender at the end of another "spoke".
    So even thought Extend is selected it just functions as Join?
    Yes, if you try to make it connect to another extender.
    Should I just change it to Join?
    Up to you. it does not matter.
    And now if I can only use the 2 Extremes since they are both dual-band there is no reason to really have separate names is there?
    Again, up to you. Things are a lot simpler though, if you use just one network name.
    in the Airport Utility overview sometimes all 3 airports are coming stacked on top of each other and sometimes my new Extreme is on top and the older ones are side by side underneath does this make a difference?
    First, I hope you are not using AirPort Utility on an iPhone or iPad, because things do not always appear accurately on those devices.
    The "new" Extreme" should be at the top of the stack. The old Extreme with a dotted line between the new and old indicates that the old Extreme is connecting using wireless and extending.
    If the Express appears side by side with old Extreme, it is extending. If it appears under the old Extreme, then it is connecting to the old Extreme and it is not extending.
    If you experiment with the location of the Express, you might be able to get it to extend the new AirPort Extreme. It will help if it is closer to the new Extreme than it is to the old Extreme.

  • Can I use my 2010 AirPort Extreme as a range extender with a new AirPort Extreme?

    I want to use an existing AirPort Extreme (2010 model) with a new AirPort Extreme to extend the range and signal strength into a shop. They are different designations, one n and the other ac. Are they compatible. I need to know before I buy the new router.

    The new AirPort Extreme will provide an ac,n,g,b compatible wireless signal.
    The existing AirPort Extreme can be configured to extend the n,g,b signal, but it cannot extend the ac signal.

Maybe you are looking for