NEW ALUMINUM KEY BOARD

HEY ALL
I JUST BOUGHT THE NEW ALUMINUM KEYBOARD AND IT WORKS GREAT EXCEPT THAT IT WONT LET ME CHOOSE A BOOT OPTION. ON MY OLD KEYBOARD, I JUST HELD DOWN THE OPTION KEY AND WAS ABLE TO CHOOSE, NOW IT WONT LET ME.
ANY IDEAS ?
THANKS

Does your mac support the apple remote? If so, you can press and hold the "menu" button until a boot option appears.

Similar Messages

New key board eject key will not open Drive Door

I know this has been answered, but I cannot find it. I have added a new white key board (not the thin one) to an 800 Mhz iMac flat-panel and of course the CD drive door will not open with the eject key.
I'm considering removing the door and gluing a pull-handle on the tray! Seriously, why would Apple make the eject key incompatible on the newer keyboards?
Thanks
Message was edited by: Peter Mars

Odd, I had the A1048 (later white keyboard with USB1.1 ports on back) keyboard on my iMac G4, I've just plugged it in my Alu Intel iMac and the Eject Key ⏏ still functions as expected. Have you checked the keyboard shortcuts in  menu > System Preferences... > Keyboard & Mouse?
Alternatively pop the ⏏ key and the F12 key off the keyboard and swap them over.
cheers
mrtotes</foint>

How do I pair an apple key board to a brand new mac mini?

How do I pair an apple key board to a brand new mac mini?

Have you tried a wired keyboard to turn on the BT system? Macs can require some special key-combinations that *must* be seen before the OS starts and BT sometimes does not activate before the OS.

New aluminum keyboard for 24" iMac-10-key numbers not working??

I've got a new 24" intel aluminum iMac I've only had for 2 weeks.
Just today, the 10-key number pad stopped working & my programs froze up with no response from the might mouse plugged into the USB port on the keyboard.
The keyboard viewer shows all of the keys being recognized & Apple Hardware Test showed no issues.
I re-booted several times, did a permission repair & ran MacJanitor & when I rebooted again, I don't get any freeze-ups so far, but I do not have the function of the 10-key portion of my new aluminum iMac keyboard.
Very strange, but it does seem to be software related.
Something of interest: Only the 789-456+1230.enter keys are not working. Those above the 789 are working fine.
And to re-iterate, the keys are all being recognized by the keyboard viewer onscreen.
Any help would be greatly appreciated.
dave

I didn't end up taking it in - I created a new user account & there were no problems with my keyboard.
I transferred my home folder to the new account & started basically fresh.
I guess my old user account was corrupted or messed up somehow.
I have done this once before on my 1book g4 laptop & it also worked.
Thanks for the suggestion, I was getting ready to pack it up for a trip to the Apple Store & remembered to try this at the last minute!
Thanks again
dave

My husband has 1 of the newer macbook pros that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

my husband has 1 of the newer macbook pros that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

Hi...
Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
he cant use his key board
You'll need to use a wired (USB) keyboard.

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

New Aluminum Keyboard Keys Don't Work

Hi All,
I just brought home my new Aluminum Keyboard that was released along with New iMac. As you see I'm on PowerMac G5.
I've installed Keyboard Update 1.1 and I've got my Fn key working. However, for the life of me I can't figure out how to get f4 key to get to work. There is a new symbol (deshboard) on it and when I was at the apple store I was shown that by pressing the f4 (deshboard) key it would start the deshboard. Mine doesn't. Same thing with f3 (expend) all windows key.
Your help is greatly appreciated.
Thank you,

i have no problem with thes f3 or f4 keys or the Fn key.Plugged it in hit software update and then installed Keyboard update 1.1, works fine
I do have a problem with the right hand Shift key though, sometimes it works and sometimes it doesnt work at all.
Anybody else have this problem or is it all function key issues only/

HT1689 my ipad mini retina display is disabled. I believe I know the cause. I packed it with my blue tooth key board in my back pack. The key board likely entered various keys and the ipad believes these entries were invalid password attempts. I am tr

my ipad mini retina display is disabled because my blue tooth key board made number key entries while in my back pack. How do I re-enable?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

TS3276 I need feedback for the following issue. When I send email from this 27 inch iMac, the computer adds a string of characters in vertical column that represents the QWERTY key board, all alpha numeric characters are included. Yahoo mail, issue only o

Restating my issue / question...
When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
Hence, I have ruled out the issue is a yahoo mail matter.
Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
Any ideas?
GMc

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Is it possible to lock out the Key Board commands in Keynote?

Is it possible to lock out your key board actions in Keynote? This happened all of a sudden. My keyboard has no effect on my trying to change text colors or enter characters. By using the mouse to add text the text box appears but I cannot change the character color.I can change it with the mouse and the new color is displayed but when I type nothing appears as the default color is white and the background is white. I did a copy and paste from a previous slide and I can enter the line to start editing but nothing appears. Nor can I delete anything with the Key board. This is only happening in Keynote. If I use the Key Board to send an email everything works fine. Can type and use the delete button so it seems that the Key Board is fine with other Apps, this is just happening in Keynote. It seems like the Key Board actions are not taking place, it is as if the Key Board is locked out of the Keynote functions.
Thanks in advance for any help
Rodger

Try resetting Keynote as follows:
remove Keynote version 6.5, you must use an application removal tool for this procedure to work: Appcleaner is free, I use Appzapper
empty the trash
Shut Down the Mac (Apple menu > Shut Down)
wait 10 seconds, then press the power button
Immediately after you hear the startup tone, hold down the Shift key, release the Shift key when you see the grey Apple screen
start up will take a few minutes longer than usual as the Mac is performing a repair routine
restart the Mac normally, (don’t hold down any keys during startup)
install Keynote from the Mac App Store

How to pair an apple TV with an Apple key board ?? Should be easy but ???

Hi out there...
Ive just bought an Apple TV and because I already have a Mac needed to buy a new key board to pair them up...but it's not happening !
So have a wasted $89.00 Aus for nothing because it should be fairly straight forward
Cheer Sal

If you have a recent model Apple wireless keyboard you should be able to pair it with the ATV very easily. Apple's Apple TV: Using the Apple Wireless Keyboard provides step by step instructions for doing this & a troubleshooting section if you encounter any problems.
In particular, note the "not paired or connected to another device" troubleshooting item. That was a "gotcha" for me because I had forgotten that I had paired my wireless keyboard with my iPhone to show someone how that works. Oops!
If you need to unpair your keyboard, you do that from the device it is currently paired with.

How do clean the new aluminum keyboard?

I have a new wireless aluminimum keyboard (the thin model) and recently spilt beer on it. Now the keys are all gummy. Does anyone know how to remove the keys to clean them? Or where I might be able to find some help?
I've seen some self-help sites for the older wireless keyboards, but not the new aluminum model. Any help at all would be appreciated as the keyboard is rather new still.
Thanks!
Sam

Just an FYI, I just recently cleaned one that had a mug of hot chocolate spilled into it. Half the keys didn't work after the spill.
I ran scalding hot water through it (basically it was 100% soaking) and then let it air dry for a few days. All the keys now work except one.
I'm tempted to rip off that key and manually fix it if I can (it's the f12/volume up).

Resetting PRAM with new aluminum keyboard

I just updated the firmware to my aluminum keyboard via Software Update. I still cannot reset the PRAM by the old tried-and-true method of holding down command, option, PR. Lately resetting the PRAM has been needed. Anyone have any idea on how to do this?

joshz -- I upgraded my memory from 1 to 2 G and then reset the PRAM 3 times using my old keyboard. This didn't help. I plugged my new aluminum keyboard back in and restarted holding down the option key. My Mini didn't know how to handle that! It got hung up at the blue screen and went no further. I had seen on another forum the suggestion of replacing the new aluminum keyboard. Apple gave me another which worked fine at my local Apple Store, but acted no different when I hooked it up to my Mini. So -- I still have my problem. I wonder how broad an issue this with folks that have upgraded to the new keyboard on their slightly older macs.

New aluminum keyboard - Zapping pram & bootcamp?

Hi,
I've just bought the new aluminum keyboard running on an iMac core 2 duo - Leopard with all current updates and I'm unable use key commands on booting, (alt=select a boot drive, command-option-p-r =Zap the pram etc)
The keyboard works fine once inside Leopard.
Any ideas on how I can fix this problem?
Regards,
Dave

It could be a firmware problem. The correct keyboard map may not be loading until the OS loads it, which means the old keyboard would be mapped at boot time. You might want to check the Apple knowledge base on this one.

New aluminum keyboard = G5 zombie?

Normally I use ctrloptioneject to put my G5 Quad to sleep. With the new aluminum keyboard and the software update, this key combo turns the computer into a zombie. The mouse cursor disappears as expected, but the drives don't spin down and the screen stays on. Nothing but a reboot will bring it out of this state. I tried the same key combo with my previous wireless keyboard and I get the same results, leading me to believe it's a software issue.
Anyone else getting this?
thx

Ah...it seems the computer didn't like that I plugged the keyboard into my PCI-E USB card. I unplugged my iPod Shuffle dock (which was plugged into the G5's last remaining native USB port) and swapped it out with the keyboard. Now the keyboard correctly puts the machine to sleep. Odd, because I knew there were issues with USB peripherals preventing sleep, but I thought it was limited to cameras and drives, not keyboards.
Of course, now I can't put the computer to sleep with the Shuffle docked, but at least I have control over that.

NEW ALUMINUM KEY BOARD

Similar Messages

Maybe you are looking for