New Amber block numbers filter not working on Lumi...

I have added two numbers to my blacklist using the long press on the numbers in my call history but I have received calls from both numbers since adding them and they did not get blocked.  These numbers are not in my contacts and I have rebooted since adding them and they were still not blocked an additional time.
Am I missing something or is anyone else having this problem?  My carrier is Verizon.

This is down to verzion most likely,they make money from blocking numbers,it could also be a software issue,ive read a few threads on this and the most likely cause is the operator.
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • Just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon

    just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon

    [Quote]
    Waiting for Tidbits and Elector to grace my post with there constant negativity and start a war of words as usual... since they love stirring the pot and angering the Windows Phone Community every time they reply to posts.  I just can't believe they spend that much time here on the forums replying if they are not a paid Verizon employee or a paid basher from a competing platform.
    [/Quote]
    Well I found nothing wrong in your post. So why even make a statement like the quote I included?
    Once more I am a retired government employee. So I have the time to post. Or has my rights been taken away to voice an opinion?
    Your posts was great you were not whining about your rights to file complaints to the FCC or FTC etc. One of the best I have read.
    And I am not trying to sway you from your phone choice. If you looked at my avitar it shows apple iphones. But I use and have used androids and not Windows phones.
    However your numbers of windows phone users all leaving over the issue is miniscule in the number of users of Android and iOS devices.
    I have written many times I wish all the devices get updated like iOS devices do. But at present that is not happening
    No bashing, no adversarial post just a little common sense is all I use.
    And again your post was great.
    Good Luck

  • Numbers 09 not working - I can open the program but only a few files are available, missing blank, checklist and many others. e.g  when I click on a file I get this error: The document "nmbtemplate is invalid. The index.xml file is missing. help.

    Please let me know what I can do to get my Numbers (iWork 09) working properly again.
    Here is what is going on:
    Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers.   I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
    The document "Blank.nmbtemplate" is invalid.  The index.xml file is missing.
    I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists.  Since then Numbers is not working right.
    I'm sure it's something simple to fix, but I've tried re installing it and that didn't work.  Appreciate any help.
    Thanks
    AppMare

    There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

  • Hi i have a ipod touch 4 generation 64gb and my camera is blocked and dose not work i cant update the ipod either

    hi i have a ipod touch 4 generation 64gb and my camera is blocked and dose not work i cant update the ipod either

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

    why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

    Here is a copy of my expressions and a copy of my data. The expressions match up going from left to right
    Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4"))
    sum(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
    count(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
    PUBLIC SHARED FUNCTION CalcPTD2(LookupArray AS OBJECT) AS INTEGER
         DIM i,Total AS INTEGER
         Total = 0
         FOR i = 0 to UBOUND(LookupArray)
               Total = Total + CINT(LookupArray(i))
         NEXT i
     NumberTimes  =   NumberTimes +1
    RETURN  Total
    END FUNCTION

  • HT204053 I have different icloud and iTunes id's and I want to do homesharing for all my devices. I'm trying to set up a new iMac but homesharing is not working. SHould it be the itunes or iCloud id?

    I have different icloud and iTunes id's and I want to do homesharing for all my devices. I'm trying to set up a new iMac but homesharing is not working. Should it be the itunes or iCloud id?

    Welcome to the Apple Community.
    Preferably your iTunes account, but it shouldn't really matter for getting homesharing turned on, as long as it's a valid ID.

  • I just got a new laptop and itunes is not working I have tryed to reinstall it and do alomst everything and it's still not working. Help?

    I just got a new laptop and itunes is not working I have tryed to reinstall it and do alomst everything and it's still not working. Help?

    What do you mean "not working"?  That could mean multiple different things.
    If help is desired, be as specific as possible.

  • TS3989 New MacAir but  photostream does not work.  Message though everything is on. "In order to use Photo Stream, you have to be signed into your iCloud account in System Preferences." And,

    New computer but Photostream does not work.  I am signed into my account but get the following message:  In order to use Photo Stream, you have to be signed into your iCloud account in System Preferences.  I go to system preferences and then get a message that says that my account cannot be accessed.  However, I am using my icloud account for email and other items and it works fine.  Any thoughts?

    Are you getting this messages in iPhoto? If so try the following (again?):
    Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane.  Then log back in and re-enable, respectively.  That should jump start Photo Stream.
    OT

  • I changed my email because I deleted the other one and I also forgot my security answers so I send a reset to my new email but it's not working it's going to the old one how do I send it to my new email

    I changed my email because I deleted the other one and I also forgot my security answers so I send a reset to my new email but it's not working it's going to the old one how do I send it to my new email

    You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
    (91761)

  • TS1702 i am using iphone 2G, i have updated IOS 3.1.3, but i am not able to use whatsapp. the newer version of whatsapp is not working in my phone. please give me the solution.

    i am using iphone 2G, i have updated IOS 3.1.3, but i am not able to use whatsapp. the newer version of whatsapp is not working in my phone. please give me the solution.

    As newer iPhones and iOS versions are made, apps start to drop support for the older versions of the iOS. It looks like you have fallen victim to this. I commend you for sticking with the original iPhone until now, but it looks like it's time for an upgrade if you want to use apps that have dropped support.
    Also the new iPhone provides hundreds of new features and spec upgrades from the original. Check it out! http://www.apple.com/iphone/

  • I moved Photoshop CS5 to my new computer.. Its not working.. What to do?

    I moved Photoshop CS5 to my new computer.. Its not working.. What to do?

    What is not working exactly?
    Did it install correctly? Accept the serial number OK? Activate OK?

  • The speaker of my brand new mac book pro are not working and I cannot plug in the earphones, the hole looks smaller than the pin or with an obstruction. anybody can help? thanks

    the speakers of my brand new mac book pro are not working and I cannot plug in the earphones, the hole looks smaller than the pin or with an obstruction. anybody can help? thanks

    Hi talero,
    Contact AppleCare or bring it into an Apple Store or AASP.

  • I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

    I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

    Hi there,
    It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    -Griff W.

  • I have updated my BRE with new rule but it is not working.

    Hi All,
    I have got a requirement to add one more rule into my existing BRE.
    Below are the points that I followed :
    1).Firstly, I created the new version for my BRE , and added my rule in that.
    2). Then I un-deployed the previous version of BRE and Deployed its new version.
    3). I did restarted host instances and Rule engine service also.
    3). Now, when I am testing the sample consisting of previous rule then it is executing,
    But on the other hand when i am testing the sample based on my new rule then BRE is not working.
    If BRE is Executing with previous rule then i believe it is working,
    Then why it is not working for my new Rule .
    4). When i am testing my policy then it is also working well enough .
    Note : The Schema path is also correct ,
    Any help and suggestion will be appreciated
    Kind Regards
    Rishi Gaur

    Hi Shankycheil,
    1). My policy version 1.0 was having 10 rules.
    2). Then i copied version 1.0  and added it to my new version 1.1 .
    3). Than i added my rule to it only.
    After all this I Undeploy version 1.0 and deployed my new version 1.1.
    In Admin console I am getting error like you mentioned   somewhere about policy not found?

  • HELP: My skype numbers do not work at all

    My skype numbers do not work at all. I am located in Norway, but have an US, UK, Irish, Swedish and Irish skype number for our business. And Skype premium.
    We loose millions on this problem: The clients only get a occupied tone when they call the numbers - AND YES, the privacy settings are set to anyone. I have also set a forwarding after 10 secconds to my Norwegian cell phone.
    Skype was ok before, but it has become **bleep** this last year. We can`t continue paying for a solution that makes us loose money.

    contact customer service
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Maybe you are looking for

  • Text catagory - Text item (TATX) in sales order

    In Sales order, we generaly use item catagory - TAN (standard item) or TANN (free of charge). - When should we use the item catagory - TATX (text item)? - Should we maintin the material master for text items? - Also please provide exaple of Text item

  • Dual ADC displays and a vid card w/ no ADC ?

    Hi. I've got a PowerMac G4 with an ATI Radeon 9800 Pro vid. card. I bought it when I purchased my 17" Apple display not knowing that the Apple display had its own connector that required me to but a $99 adaptor that also requires a power cord! Anyway

  • Problems with stacked bar chart in Java SDK and CRDesigner

    Hi @ll, I have an issue with the rendering of stacked bar charts through the Java SDK and the CRDesigner. unfortunately, my research in this forum and with the help of aunt google didn't lead to success. These are my problems: I have a  stacked bar c

  • How can I set the location of iChat dialogue box on my desktop?

    When I use iChat it always opens a chat box in the upper left corner of my screen. I then drag it down to the lower right, where I want it, but it doesn't remember that position when I close it and open a new box. Is there a way to get iChat to alway

  • Missing flex-pmd-1.0.RC3.pom in Maven repo

    Unlike for RC2, there is no pom in http://opensource.adobe.com/svn/opensource/flexpmd/maven-repository/release/com/adobe/ac/f lex-pmd/1.0.RC3/ Thi smake RC3 unsable with Maven, could you publish it please ?