New and need help with replace harddrive M45-s265

Hello,
I am not sure were to post this had a hard time trying to find were to post this message.
(I also upgraded to 2g memory with out a problem)
I replaced the board and get a message as if it has none
part of message
PXE-E61: Media test failure, check cable
PXE-MOF: Exiting PXE ROM
The new board is from newegg and is a western digital wd scorpio ATA 250 gb wd2500beve-00wzto, I was told this is what i needed.
The key in and pins are the same as old board.
Thank you so much for any help I can get

That's the correct drive. What is your question? To do the replacement, you flip the unit over, remove the hard drive cover, slip the drive out, remove the 'caddy' and put it on the new drive, slide the new drive back in, replace the cover and boot from your recovery disks to restore the original disk image.

Similar Messages

Urgent: im new and need help with this task!

I need help with converting the pseudo code to java code, Any help will b greatly appreciated!
// Declare a variable of type int, called "choice".
// Generate a random number between 0 inclusive and 7
// exclusive, and store that number into the variable
// "choice". (How do you generate a random number? Use the
// nextInt(int) method inside the random object, which takes
// a single int parameter. You can read about this method
// here:
// http://java.sun.com/j2se/1.5.0/docs/api/java/util/Random.html
// If "choice" is equal to 0, then create and return a new
// IBlock object, passing "game" as the parameter to IBlock's
// constructor.
// Otherwise, if "choice" is equal to 1, then create and
// return a new TBlock object, passing "game" as the
// parameter.
// Otherwise, if "choice" is equal to 2, then create and
// return a new OBlock object, passing "game" as the
// parameter.
// Otherwise, .... etc ....
// (please continue to do this for all of the 7 kinds of block
// that can be created)

import java.util.*;
public class Echo{
     public static void main(String[] args)     {
          //System.out.println("enter ur choice");
Random r=new Random();
int choice=r.nextInt(6);
     switch(choice)
     case 0:
          IBlock object0=new IBlock("games");
          break;
     case 1:
          TBlock object1=new TBlock("games");
          break;
     case 2:
          OBlock object2=new OBlock("games");
          break;
     case 3:
          LBlock object3=new LBlock("games");
          break;
     case 4:
          JBlock object4=new JBlock("games");
          break;
     case 5:
          SBlock object5=new SBlock("games");
          break;
     case 6:
          ZBlock object6=new ZBlock("games");
          break;
class TBlock
     TBlock(String s)
          System.out.print("TBlock called"+"\n value passed is "+s);
class IBlock
     IBlock(String s)
          System.out.print("IBlock called"+"\n value passed is "+s);
class JBlock
     JBlock(String s)
          System.out.print("JBlock called"+"\n value passed is "+s);
class OBlock
     OBlock(String s)
          System.out.print("OBlock called"+"\n value passed is "+s);
class LBlock
     LBlock(String s)
          System.out.print("LBlock called"+"\n value passed is "+s);
class SBlock
     SBlock(String s)
          System.out.print("SBlock called"+"\n value passed is "+s);
class ZBlock
     ZBlock(String s)
          System.out.print("ZBlock called"+"\n value passed is "+s);
}

New and need help with keithley 2700 GPIB threw labview 2010

Hello everyone,
I have the drivers for the keithley 2700 dmm and its ok with labview idntifying the device.
but when im trying to run the "Keithley 27XX Single Measurement.vi" and take a single resistance measurment
I always get this error, (pic related)
can anyone help please?
btw, where can i start learn from zero how to program in labview in GPIB protocol (not visa) ?
thanks alot.
E.
Attachments:
Error.jpg ‏500 KB

Zerez,
Definately search the forums as I found another forum wher they tried troubleshooting a 2700 that was locking up. Unfortunately a resolution wasn't determined.
http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/keithley-2700-7700-4-wire-Measurement-GPIB/td...
Can you use max to request values from the device? Using visa test panels. It should reply to the identification command if it is functioning properly.
Kyle Hartley
RIO Product Support Engineer
National Instruments

I am really new and need help with internet

Hi. I am really excited about the new MACS and want one really bad. First, I need to know what I would need to get for wireless internet. Next, are Macs compatible for Internet like MSN?
iBookG4 Windows XP I want to get an iBookG4

I have a PowerBook G4 17 with a gig of ram that I absolutely couldn't live without. I use a Verizon aircard for internet access, and it's proven to be about 90% as fast as a high speed cable connection. I routinely send pics up to 3M in size with no problem. The only thing I have found that it really doesn't do very well is downloading software. And the Verizon card is really affordable--I have an unlimited plan that doesn't hurt each month at all. Hope this helps.

I'm new and need help with lists.

I'm writing an app in java (duh, thats why im here), and using NetBeans. I need to know how to add items to an awt list at run time. Thanks for your help in advance. ;)

Try the APIs. I am assuming that you are not using the GUI editing part of NetBeans to make your app, but if you are, again.... make the action and then look at the APIs .
Good Luck,
Edward S. Rice

Hi - new and need help with christmas pressie plea...

Hi
I was given the BT Graphite 2500 answering machine phone with 2 extra handsets.
I have charged them all up and put them in situ today. I have got the caller display facility, and when i test the phone with my mobile, only the base unit (with the answer phone) rings. The other two handsets show who is calling, but neither of the handsets ring. What should i do?
Thanks

All i can suggest is recheck the user guide and after that call the help line If you experience any problems, please call the Helpline on Freephone 0808 100 6556 tomorrow because of the christmas holiday period
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

New and need help with $ value in a sell

I just bump into this product and h
ave fall in love with. how do I format
starting pay field to $0.00 in
the numeric field instead of just 18
any free tutuorial is appreciated

Set the display pattern for the Date/ Time Field to "date{MM/YY}" to display like 08/10..
Thanks
Srini

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Moved to new server and needing help with feed

My website www.gothamknightsonline.com has been moved to a new server and I am needing to keep the feed updated with new and old podcasts. I have reposted some of the old episodes as well as a new one I just posted. I have not been able to get the feed to show up. When I view our podcasts itunes page all of the info on each individual podcast is now gone with just the episodes listed and no more information.
Here is the feed URL: http://gothamknightsonline.com/category/podcast/feed/ (I have verified the feed) but I am not certain if this is the same feed URL that was listed before. Either way the plugin i used for my podcasts in wordpress has this in the feed as well as our iTunes id and URL ( http://itunes.apple.com/us/podcast/batman-gotham-knights-online/id315370686)
I am doing all of this on a Wordpress blog using the podpress plugin.
Any help would be appreciated. Thank you
-Garrey

iTunes is looking for a feed at http://www.gothamknightsonline.com/feed/?cat=10 and not finding it - checking this I don't get 'file not found' but if there is a file there it contains no data whatever.
I assume this is your original feed URL. The method for redirecting iTunes to another feed URL involves placing a special tag in the original feed, and is described in detail here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
Your new feed contains this tag (effectively redirecting to itself); you need to place a copy of the feed, with the redirect tag, at the original URL and leave it there for a couple of weeks. If you are unable to do this the two alternatives are described in my article.

New here and need help with design

Hello all, I am working on my son's first birthday thank you cards. I need help removing the line in between the blue and green background. Thanks. Stacey

You also have a narrow black line on the lower left side.
Increase the the magnification to 500% and select the black and the white lines with the Magic Wand (Continuous checked). Feather by one pixel. Sample the green right under the white line, make it the Foreground Color and fill the selection with it.
Juergen

New to Blackberry and need help with calendar

Hi all,
Just got my very first BB and could do with some help with my laptop and calendar (don't know if what I want is possible or available, so sorry it its not )
I got my BB for my personel use and want to be able to sync it with a calendar on my laptop. I don't have microsoft outlook, so I was wondering if anyone knew of a application or download I can get that will give me a calendar on my Laptop that I can sync with my BB.
Many thanks
Abi
Solved!
Go to Solution.

Abi, welcome to the Forums.
Google Calendar sync is a perfect option.
http://www.google.com/mobile/blackberry/sync.html
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Going to Australia and need help with Power converters

Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.

godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Just Switched To Mac's and Need Help With A Few Issues!

Hi All,
I finally did it and switched to a Mac!! Never thought it would happen as I always felt guilty about the cost but after 5 laptops crashing on me - well, I just could not take it anymore! I managed to get a fairly good deal on a 15" Macbook Pro - 2.2/120GB version. I still don't know much about the mac way but am trying to learn so any help would be appreciated!
1). Is there any kind of video tutorial (preferably free!) that I can use that will help me learn the Ma OS X? I have Tiger 10.4.11 on my MBP (Did you hear that - MY MBP!!!)
2). AOL Assured me that they fully support Mac before I purchased (only 5 times!) but after I had bought it - they then told me that they do not! I got the AOL disk for Mac but it kind of ***** - features are missing etc. Does anyone in the UK run their Mac's with AOL and does it run as per normal? Any advice with AOL & Mac?
3). AOL also told me - hey, no probs - of course you can transfer all your old emails, favourites folders, personal filing cabinet from a PC to a Mac - but then, after I bought it - the so called dedicated Mac Experts at AOL tell me that simply is not possible - What advice can anyone give me who has switched from PC to Mac with AOL and who needed to transfer all their stuff over? AOL tells you totally different things depending on who you talk to and even from what their web page state! I am really fed up with them!
4). If I am ever successful in getting all my many years worth of data from AOL on a PC to a Mac, I am really intent of changing ISP's - what are the best ones for Mac that offer good Mac support, good deals and no charges for telephone support?
5). I was initially happy with Tiger as again, AOL assured me they supported it but not Leopard (even their website says so) and as I stupidly thought that it must be true (we are talking AOL here!). Now I know that they don't support anything Mac, I am contemplating moving to Leopard - I am a little cautious as I heard there were/are many bugs and unhappy leopard experiences - have the majority of these been solved yet and is it advisable to change to Leopard or should I wait until an updated version comes out?
6). My MBP was originally bought in the US but is registered to my name in the UK. it has 6 months Apple warranty left and I wish to buy Applecare. Apple says it 'recommends' buying Applecare in the country at which the item is registered (not bought, as I understand it). Does that mean, if I buy Applecare in the USA, Apple UK will still accept it and service my MBP as they would do any other or will I have to have the hassle of sending the thing to the USA if it needs attention? Applecare USA T&C's state only for the 50 States & Canada and Applecare UK state only for the UK & EU. Both however state international servicing?! I am a bit confused on this one. I travel a lot and need to know, that any Applecare I buy will not then be limited to just the places they state in the T&C's. As It reads to me, Applecare purchased in the USA/Canada will not cover the UK/Europe/ROTW and vice versa. Is this true or am I missing something or just plain thick?
5). I really wish to upgrade the 120GB HDD. My understanding is that it must be done by either Apple (who charge really silly money) or if correct, at an "Authorized Apple Service Provider" who of course will be much cheaper. If true, does this mean at ANY authorized apple service provider on the planet or just ones in which the item is registered? If I do the upgrade with a service provider, will Apple then also service the new HDD if something goes wrong as per normal anywhere in the world or will they then say, sorry, will not service the new HDD and you have to go back to the place where you had it installed, even though it was one of their authorized service centers? (that would really suck)!
6). The spelling and dictionary (and a few other things) are set to US English - how can I set to UK English? I have tried but to no avail so far.
7) What and how should I set the Firewall settings so I will not get attacks by any form of malware? (I do not know much about this area and what the implications mean)!
Well, that's it so far - please bear my ignorance, I am so new to Mac's and hope this to be one of the smarter decisions I have made in life! Already I have strange sensation that I never had with all those years of Microsoft & PC's - I kinda feel reassured, safe, that if I have problems, they will get sorted, My life will now be easier and not having to worry so much about crashes, viruses, trojans etc, gives me a sense of liberation and contentment almost - very strange feeling but a **** good one! (if only the women in my life were like that)!
Thank You All From A PC to Mac Switcher (and NO! I do not feel guilty or scared anymore)!
SuaveBhav!

I can help you with your questions about AppleCare, and can also reassure you that both the macbook pro and Leopard will be worth your investment and the time you are putting into figuring out how to get your data across. I switched from windows when I bought my macbook a year and a half ago and would not use any other system now. The other day I completed the transition by erasing parallels and Windows from my system entirely.
As for AppleCare, you can get warranty care anywhere in the world, no matter where you buy your AppleCare. Mine was bought and is registered in the US, I live in Slovakia, and have had it serviced several times in Austria and Slovakia under the warranty without any problems at all. There are differences, however, in exactly what the warranty covers from place to place, in accordance with the law in each place that AppleCare is issued. Even though I live in the EU, my agreement with Apple is an American one, and the American guarantees hold. If EU law would demand that Apple fix more things, for instance, than American law does, I could not get those things repaired under my agreement, and vice versa.
Basically, though, I understand my agreement with AppleCare to be that they will fix all problems/damage that are not my fault free of charge for two years after my initial one-year warranty runs out, and that is good enough for me.

Just coming from Win and need Help with bootcamp/parallels+general osx stuf

Well I absolutely love my Mac. I'm just having some problems affording it financially, but when I compare this new MacBook Pro to other like computers, there's a very very small difference in the hardware, and Im usually building laptops that are similiar to this for around 2k anyways. So I'm not 100% sure if I'll keep this or not, and maybe settle for cheaper PC that's under 1.5k (because Apple charges you a 10% open box fee) and buy a mac when I'm in a better position, or just keep this and see what I can do.
But a few of the things that are making me miss a PC might push me toward a cheaper PC. And so maybe someone here can help me out before I make a decision.
First off, is there anything that's the equivalent to a disk defragmentor for OSX?
Second, is the graphics card really powerful in this Macbook 15 inch 2.4 ghz (the newest one)
Im also having a problem with this keyboard and my favorite game. Basically I need to hold down certain keys (control, alt, shift and space) in order to use skills. But for some reason when I hold down any of these buttons, it only reads it once. So I have to push it every time I'd say, want to heal myself or hit a monster... and that might not seem like a lot but if you play a game for 1 hour + (I'd usually play around 4 hours) it's going to absolutely kill my fingers and make playing the game take a lot longer.
Now I'm using parallels (the only way to play my game) and whenever I try to install a new KB, because I've found out that the way a KB is wired will determine whether or not you can spam a key or not (Like a cheap USB one wont work, but a more expensive logitech one allows you to) but it either
1) Crashes Parallels and my Win VM
or
2) It sets up whatever kb I use to be used with Mac OSX's drivers which means no matter what the KB is, ctrl alt space and shift cant be spammed.
I'm also unable to use FRAPS, a PC video capturing program used for games while running parallels. My FPS constantly dips to 0 which lags me in the game, and I can't find a good recording program thats OSX side and that works while Parallels is running (I emailed parallels about what vid they used in their demo but no response)
Now if use bootcamp, will I have nothing to worry about? Will all of the hardware act like it should act natively on a PC? As in will my nVidia graphics card act like it normally would on a PC instead of it being some kind of virtualized hardware or something like on parallels?
Thanks for the help guys... 2 weeks to decide on whether or not I keep th is laptop....
Wii code: 2053-8430-7334-7335
MGO Name: Crim, [BBB]Crim, Pacifist, Kaze, oSoiFong, A NOOB.

The graphics card is a higher performance GPU than the X1600 in the previous MBP models. As for "really powerful" you don't provide any basis for comparison. Visit the ATI site to find out the specifications for the model.
Well I understand that much. I just mean as far as a graphics card in general goes, is it strong enough to support a variety of games (both PC and Mac)? This is my first computer without a crappy intergrated graphics card which could barely handle games from the late 1990s.
As for keyboard shortcuts I'm not sure if you're referring a Mac or a PC game. However, this reference may help. If the game is a Mac version you'll need to contact the game's developer about any problems with how to use the game on a Mac. If you read the Parallels documentation it will explain how to generate any special keyboard characters when in Windows.
Umm it's not that. Like I first figured out this problem with all electronics in general when I was a kid playing with one of those press and speak books. What I found out was that, let's pretend there were 3 buttons. One was cow going moo, one was a cat meowing and one was a dog barking. If you held down the Cow button and pressed the Cat button, the cow would still Moo. If you held down the Cow and press the dog button, the cow would still moo. However if you pressed and held the cat button, then pressed the cow button the cat would stop meowing, and the moo would override it.
That same principle applies to keyboards from what I've seen. I know there are some keyboards where I can use the control button and the alt button at the same time, and some keyboard I can't use. I can't blame the game, because there ARE keyboards that work the way I want it to. And I'm not talking about keyboard shortcuts. Pressing Control+Alt isn't a shortcut in a game, just two different commands. Like one is jump, one is attack. In the game you can Jump and Attack with some keyboards, some keyboards only let you jump or attack.
Another example is if I put my jump key on the letter "a" and if I hold a, I jump over and over until I let go. but if I put jump to my space bar, I jump once then stop. For some reason it won't repeat keys while in a game. Same goes for other buttons, ctrl, shift, and alt.
Does that make things a little more clear?
but what I'm going to do is try my mac keyboard on a PC and see if it has the same limitations.
If Parallels is crashing either you have a faulty installation, your OS X installation is corrupted, or you have not allocated sufficient RAM for the VM. You need at least 2 GBs of installed RAM to use virtualization software and should allocate at least 384 MBs or RAM to Windows XP and 512 MBs to Vista. If you have only 1 GB of RAM installed your system won't be very stable when you try to run Parallels with Windows on 384 or 512 MBs of RAM.
I have the newest 15 inch which has gigs. And I've tried setting Parallels to both 1 and 512 (windows xp) and I worded the problem wrong. Parallels doesnt crash, parallels runs fine. What happens is Windows XP gets the blue screen of death whenever I try to install a usb device. Since I can't find a logitech keyboard that has drivers/software for a mac, I tried using a Windows one and tried installing it on my XP... and thats when I got the BSOD
Parallels uses all the native Mac hardware via the virtualization software. No special Mac drivers are required nor special Windows drivers.
If you cannot run a Windows program in Parallels it's not a problem with OS X. Complain to Parallels.
It's not that a program isn't running. It's running fine, it's just my FPS gets really low. What I'm trying to figure out is if my graphics card isn't good enough in general, or if it's not good enough to handle parallels and osx and a game with a video capture all at once.
Boot Camp runs Windows natively on the hardware just as if you were using any other dedicated Windows hardware. "Will I have nothing to worry about?" I don't know. Boot Camp provides the necessary Windows drivers for all currently produced Intel Macs. You can install Windows XP with Service Pak 2 or Vista. Read the Boot Camp documentation to find out more.
Well I meant will I have nothing to worry about as in, will my graphics card be as effective on my bootcamped win XP as it would be if it was a native XP laptop, or will it be slightly less effective since it was based for a mac intel computer... does that make sense or do I need to reword it?

I am new and need help --- Streaming live video

Hello,
I am attempting to stream live video from my Trendnet TV-IP 201 cameras through my web site. We have been able to embed the xplug.class applet into the page, but we can not remove the controls. If someone has any knowledge on this, please help us out. Thanks in advance for the help.
Edited by: bill23stevens on Oct 15, 2007 11:28 AM

I have the same problem, need to show and capture the video from Trendnet IP-camera and the same xplug.jar that sits in the camera is decompiled here:
// Decompiled by DJ v3.9.9.91 Copyright 2005 Atanas Neshkov Date: 17.12.2007 11:20:28
// Home Page : http://members.fortunecity.com/neshkov/dj.html - Check often for new version!
// Decompiler options: packimports(3)
// Source File Name:   xplug.java
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.net.*;
import java.text.DateFormat;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.Properties;
import javax.sound.sampled.*;
import javax.swing.JFileChooser;
import javax.swing.JOptionPane;
public class xplug extends Applet
    implements ItemListener, ActionListener, Runnable
    class TStreaming
        public void seturl(String s, String s1)
            try
                if(s.indexOf(":") > 0)
                    m_urlRemoteHost = new URL("http://" + s);
                else
                    m_urlRemoteHost = new URL("http://" + s + ":" + s1);
            catch(MalformedURLException malformedurlexception)
                System.err.println("MalformedURLException : " + malformedurlexception);
        public void init(xplug xplug1)
            m_urlRemoteHost = xplug1.getCodeBase();
            m_sRemoteHost = m_urlRemoteHost.getHost();
            if(m_urlRemoteHost.getPort() <= 0)
                m_iRemotePort = new Integer(80);
            else
                m_iRemotePort = new Integer(m_urlRemoteHost.getPort());
            m_iTimeout = Integer.valueOf(xplug1.getParameter("Timeout"));
        public void init(String s, String s1, int i)
            m_iRemotePort = new Integer(s1);
            m_sRemoteHost = s;
            m_iTimeout = new Integer(i);
        public boolean InitRequest(String s)
            if(s.equals("/goform/video2"))
                m_stream_type = 1;
            else
            if(s.equals("/goform/audio2"))
                m_stream_type = 2;
            else
                return false;
            m_sRequest = "";
            m_sRequest = m_sRequest + "GET " + s + " HTTP/1.0\r\n";
            m_sRequest = m_sRequest + "User-Agent: java-mobile\r\n";
            m_sRequest = m_sRequest + "Authorization: Basic " + xplug.DeviceSerialNo + "\r\n";
            m_sRequest = m_sRequest + "\r\n";
            m_bIsConnect = false;
            return true;
        public boolean OpenSession()
            try
                m_sktClient = new Socket(m_sRemoteHost, m_iRemotePort.intValue());
                m_sktClient.setSoTimeout(m_iTimeout.intValue());
                m_Input = new DataInputStream(m_sktClient.getInputStream());
                m_Output = new DataOutputStream(m_sktClient.getOutputStream());
                m_bIsConnect = true;
            catch(IOException ioexception)
                m_bIsConnect = false;
            return m_bIsConnect;
        public void CloseSession()
            try
                m_Input.close();
                m_Output.close();
                m_sktClient.close();
                m_bIsConnect = false;
            catch(Exception exception) { }
        public boolean SendRequest()
            try
                if(m_numsend < 3)
                    m_Output.write(m_sRequest.getBytes(m_charset));
                    m_numsend++;
            catch(Exception exception)
                System.err.println("<err>:SendRequest =" + exception);
                return false;
            return true;
        public int subParameter(String s)
            String s1 = s;
            int k1 = 0;
            String s8 = "\r\n\r\n";
            String s9 = "\r\n";
            String s10 = "";
            String s11 = "";
            String s13 = "";
            do
                int j1 = s1.indexOf(s8);
                int i1 = s1.indexOf(s9);
                if(j1 == i1)
                    String s2 = s1.substring(0, i1);
                    int i = s2.indexOf(":");
                    if(i > 0)
                        String s4 = s2.substring(0, i).toLowerCase();
                        String s6;
                        if(s4.compareTo("content-type") == 0)
                            s6 = s2.substring(i + 1, i1).trim();
                        else
                        if(s4.compareTo("content-length") == 0)
                            String s15 = s2.substring(i + 1, i1).trim();
                            Integer integer2 = new Integer(Integer.parseInt(s15));
                            m_len = integer2.intValue();
                    } else
                    if(s2.indexOf("HTTP") >= 0)
                        int j = s2.indexOf(" ");
                        s2 = s2.substring(j + 1, i1);
                        j = s2.indexOf(" ");
                        s2 = s2.substring(0, j);
                        Integer integer = new Integer(Integer.parseInt(s2));
                        k1 = integer.intValue();
                    break;
                String s3 = s1.substring(0, i1);
                int k = s3.indexOf(":");
                if(k > 0)
                    String s5 = s3.substring(0, k).toLowerCase();
                    String s7;
                    if(s5.compareTo("content-type") == 0)
                        s7 = s3.substring(k + 1, i1).trim();
                    else
                    if(s5.compareTo("content-length") == 0)
                        String s16 = s3.substring(k + 1, i1).trim();
                        Integer integer3 = new Integer(Integer.parseInt(s16));
                        m_len = integer3.intValue();
                    } else
                    if(s5.compareTo("time") == 0)
                        s10 = s3.substring(k + 1, i1).trim();
                    else
                    if(s5.compareTo("usec") == 0)
                        String s12 = s3.substring(k + 1, i1).trim();
                        if(s12.length() < 6)
                            s12 = "0" + s12;
                        Long long1 = new Long(Long.parseLong(s10 + s12));
                        Date date = new Date(long1.longValue() / 1000L);
                        m_sDate = df.format(date);
                    } else
                    if(s5.compareTo("userdata") == 0)
                        String s14 = s3.substring(k + 1, i1).trim();
                        try
                            m_sStatus = Long.decode(s14).longValue();
                        catch(NumberFormatException numberformatexception)
                            System.err.println("m_sStatus decode failed");
                } else
                if(s3.indexOf("HTTP") >= 0)
                    int l = s3.indexOf(" ");
                    s3 = s3.substring(l + 1, i1);
                    l = s3.indexOf(" ");
                    s3 = s3.substring(0, l);
                    Integer integer1 = new Integer(Integer.parseInt(s3));
                    k1 = integer1.intValue();
                s1 = s1.substring(i1 + 2, s1.length());
            } while(true);
            return k1;
        public int ParseHttp()
            int j;
label0:
                j = 0;
                int k = 0;
                String s = "\r\n\r\n";
                String s1 = "\r\n";
                StringBuffer stringbuffer = new StringBuffer("");
                try
                    do
                        int i;
                        if((i = m_Input.read()) != -1)
                            k = 0;
                            stringbuffer.append((char)i);
                            continue;
                        if(k > 10)
                            j = subParameter(stringbuffer.toString());
                            System.err.println("<err>: ParseHttp Retry j>10 ret=" + j);
                            break label0;
                        Thread.currentThread();
                        Thread.sleep(50L);
                        k++;
                    } while(stringbuffer.toString().indexOf(s) <= 0);
                    j = subParameter(stringbuffer.toString());
                catch(Exception exception)
                    System.err.println("<err>: ParseHttp error " + exception);
                    m_numsend--;
                    return -1;
            m_numsend--;
            return j;
        public void GetAudioHead(byte abyte0[], TAUHeader tauheader)
            byte abyte1[] = new byte[4];
            byte abyte2[] = new byte[2];
            tauheader.depth = abyte0[0];
            tauheader.channel = abyte0[1];
            tauheader.adpcm = abyte0[2];
            for(int i = 0; i < 4; i++)
                abyte1[i] = abyte0[4 + i];
            tauheader.speed = xplug.byte2int(abyte1);
            tauheader.ref1 = abyte0[8];
            abyte2[0] = abyte0[10];
            abyte2[1] = abyte0[11];
            tauheader.ref2 = xplug.byte2short(abyte2);
            for(int j = 0; j < 4; j++)
                abyte1[j] = abyte0[12 + j];
            tauheader.size = xplug.byte2int(abyte1);
        public int ReadData(byte abyte0[])
            try
                m_Input.readFully(abyte0, 0, m_len);
            catch(Exception exception)
                return -1;
            return m_len;
        public int ReadData(byte abyte0[], TAUHeader tauheader)
            if(m_len < 16)
                return -1;
            try
                if(m_stream_type == 2)
                    m_Input.readFully(abyte0, 0, 16);
                    GetAudioHead(abyte0, tauheader);
                    m_Input.readFully(abyte0, 0, m_len - 16);
            catch(Exception exception)
                return -1;
            return m_len;
        public int uuencode(String s)
            char ac[];
            int i;
            int i1;
            int j1;
            char ac1[];
            String s1 = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
            ac = new char[s1.length()];
            ac = s1.toCharArray();
            boolean flag = false;
            boolean flag2 = false;
            long l = 0L;
            boolean flag3 = false;
            i1 = 0;
            j1 = 0;
            buf.setLength(0);
            if(s.length() < 2)
                return -1;
            i = s.length();
            ac1 = new char;
ac1 = s.toCharArray();
_L6:
boolean flag1;
int j;
long l1;
int k;
flag1 = false;
j = 0;
l1 = 0L;
k = 0;
_L2:
if(i <= 0 && j == 0)
break MISSING_BLOCK_LABEL_256;
long l4;
if(i > 0 && !flag1)
l4 = ac1[i1++];
if(--i < 0)
flag1 = true;
j1 = j;
l4 = 0L;
} else
flag1 = true;
j1 = j;
l4 = 0L;
if(!flag1 || j != 0)
long l2 = l4;
l1 = l1 << 8 & 65535L;
j += 8;
l1 = (l1 | l2) & 65535L;
_L4:
if(j < 6) goto L2; else goto L1
_L1:
long l5;
j -= 6;
long l3 = l1 >> j & 63L;
int k1 = (int)l3;
l5 = ac[k1];
if(k <= 1020) goto L3; else goto L2
_L3:
buf.append((char)(int)l5);
if(flag1)
j = 0;
goto _L4
if(j1 == 2)
buf.append('=');
buf.append('=');
} else
if(j1 == 4)
buf.append('=');
if(i <= 0)
return 1;
if(true) goto L6; else goto L5
_L5:
final int ST_VIDEO = 1;
final int ST_AUDIO = 2;
private String m_charset;
private String m_sRequest;
public String m_sRemoteHost;
private URL m_urlRemoteHost;
public Integer m_iRemotePort;
private Integer m_iTimeout;
private Socket m_sktClient;
private DataInputStream m_Input;
private DataOutputStream m_Output;
public boolean m_bIsConnect;
public int m_numsend;
public int m_len;
public String m_sDate;
public long m_sStatus;
private DateFormat df;
private int m_stream_type;
public StringBuffer buf;
TStreaming()
df = DateFormat.getDateTimeInstance(1, 1);
buf = new StringBuffer("");
m_stream_type = 0;
m_numsend = 0;
m_charset = "8859_1";
m_sRemoteHost = "";
class TAUHeader
byte depth;
byte channel;
byte adpcm;
int speed;
byte ref1;
short ref2;
int size;
TAUHeader()
depth = 0;
channel = 0;
adpcm = 0;
speed = 0;
ref1 = 0;
ref2 = 0;
size = 0;
public class Adpcm
public class AdpcmState
int valprev;
int index;
public AdpcmState()
public String codecName()
return "DVI ADPCM";
public int getSampleRate()
return 8000;
public Object createState()
return new AdpcmState();
public void initState(Object obj)
((AdpcmState)obj).valprev = 0;
((AdpcmState)obj).index = 0;
public int decode(Object obj, byte abyte0[], int i, short aword0[], int j, int k, byte byte0,
short word0)
byte byte1 = 0;
boolean flag = false;
int k1;
int l1;
if(byte0 < 0)
l1 = ((AdpcmState)obj).valprev;
k1 = ((AdpcmState)obj).index;
} else
l1 = word0;
k1 = byte0;
int i2 = stepsizeTable[k1];
k *= 2;
for(int j2 = k; j2-- > 0;)
int i1;
if(!flag)
byte1 = abyte0[i++];
i1 = byte1 >> 4 & 0xf;
flag = true;
} else
i1 = byte1 & 0xf;
flag = false;
k1 += indexTable[i1];
if(k1 < 0)
k1 = 0;
else
if(k1 > 88)
k1 = 88;
int l = i1 & 8;
i1 &= 7;
int j1 = i2 >> 1;
if((i1 & 4) == 4)
j1 += i2 << 2;
if((i1 & 2) == 2)
j1 += i2 << 1;
if((i1 & 1) == 1)
j1 += i2;
j1 >>= 2;
if(0 != l)
l1 -= j1;
else
l1 += j1;
if(l1 > 32767)
l1 = 32767;
else
if(l1 < -32768)
l1 = -32768;
i2 = stepsizeTable[k1];
aword0[j++] = (short)l1;
((AdpcmState)obj).valprev = l1;
((AdpcmState)obj).index = k1;
return k;
private final int indexTable[] = {
-1, -1, -1, -1, 2, 4, 6, 8, -1, -1,
-1, -1, 2, 4, 6, 8
private final int stepsizeTable[] = {
7, 8, 9, 10, 11, 12, 13, 14, 16, 17,
19, 21, 23, 25, 28, 31, 34, 37, 41, 45,
50, 55, 60, 66, 73, 80, 88, 97, 107, 118,
130, 143, 157, 173, 190, 209, 230, 253, 279, 307,
337, 371, 408, 449, 494, 544, 598, 658, 724, 796,
876, 963, 1060, 1166, 1282, 1411, 1552, 1707, 1878, 2066,
2272, 2499, 2749, 3024, 3327, 3660, 4026, 4428, 4871, 5358,
5894, 6484, 7132, 7845, 8630, 9493, 10442, 11487, 12635, 13899,
15289, 16818, 18500, 20350, 22385, 24623, 27086, 29794, 32767
public Adpcm()
public class CgiIO
public boolean isConnect()
return true;
private int opensock(String s, String s1)
try
URL url = new URL(s + s1);
int i = url.getPort() == -1 ? 80 : url.getPort();
if(!s.equals(gurl) || inet == null)
inet = InetAddress.getByName(url.getHost());
fw_sktClient = new Socket(inet, i);
catch(Exception exception)
System.err.println("<err>: create socket error" + exception);
return 0;
return -1;
public void CgiIO()
public void CgiIO(String s, String s1)
gurl = s;
guri = s1;
opensock(gurl, guri);
public void seturl(String s, String s1)
String s2;
if(s.indexOf(":") > 0)
s2 = "http://" + s;
else
s2 = "http://" + s + ":" + s1;
if(!s2.equals(gurl))
gurl = s2;
opensock(gurl, guri);
public void seturi(String s)
guri = s;
public String getContent()
return ini.content;
public int get()
try
URL url = new URL(gurl + guri);
HttpURLConnection httpurlconnection = (HttpURLConnection)url.openConnection();
httpurlconnection.setRequestProperty("Authorization", "Basic " + xplug.DeviceSerialNo);
httpurlconnection.connect();
if((conlen = httpurlconnection.getContentLength()) > 0)
m_Input = new DataInputStream(httpurlconnection.getInputStream());
m_Input.readFully(buf, 0, conlen);
tStr = new String(buf, 0, conlen);
ini.content = tStr;
httpurlconnection.disconnect();
catch(Exception exception)
System.err.println(exception);
return 0;
return -1;
public int post()
boolean flag = false;
String s = "";
s = s + "POST " + guri + " HTTP/1.0\r\n";
s = s + "User-Agent: java-mobile\r\n";
s = s + "Authorization: Basic " + xplug.DeviceSerialNo + "\r\n";
s = s + "Content-Length: " + ini.content.length() + "\r\n";
s = s + "\r\n";
if(fw_sktClient == null || fw_sktClient.isClosed())
opensock(gurl, guri);
fw_sktClient.setReuseAddress(true);
fw_sktClient.setKeepAlive(true);
fw_sktClient.setSoTimeout(5000);
DataOutputStream dataoutputstream = new DataOutputStream(fw_sktClient.getOutputStream());
BufferedReader bufferedreader = new BufferedReader(new InputStreamReader(fw_sktClient.getInputStream()));
dataoutputstream.write(s.getBytes());
dataoutputstream.write(ini.content.getBytes());
String s1;
if((s1 = bufferedreader.readLine()) != null)
if(s1.indexOf("200") > 0)
flag = true;
else
flag = false;
dataoutputstream.close();
bufferedreader.close();
return !flag ? 0 : -1;
Exception exception;
exception;
System.out.println("post exception:" + exception);
return 0;
public int postproblem()
HttpURLConnection httpurlconnection;
URL url = new URL(gurl + guri);
System.err.println("1post: ini.content " + ini.content);
httpurlconnection = (HttpURLConnection)url.openConnection();
System.err.println("2post: ini.content " + ini.content);
httpurlconnection.setRequestMethod("POST");
System.err.println("3post: ini.content " + ini.content);
httpurlconnection.setDoOutput(true);
httpurlconnection.setDoInput(true);
System.err.println("4post: ini.content " + ini.content);
m_Output = new DataOutputStream(httpurlconnection.getOutputStream());
System.err.println("5post: ini.content " + ini.content);
try
httpurlconnection.setRequestProperty("Authorization", "Basic " + xplug.DeviceSerialNo);
catch(IllegalStateException illegalstateexception)
System.err.println("<err><CgiIO>: ignore1 " + illegalstateexception);
System.err.println("6post: ini.content " + ini.content);
try
httpurlconnection.connect();
break MISSING_BLOCK_LABEL_348;
catch(IOException ioexception)
System.err.println("<err><CgiIO>: ignore1 " + ioexception);
return 0;
System.err.println("7post: ini.content " + ini.content);
m_Output.write(ini.content.getBytes());
httpurlconnection.getResponseCode();
if(httpurlconnection.getResponseCode() != 200)
break MISSING_BLOCK_LABEL_456;
httpurlconnection.disconnect();
System.err.println("8post: ini.content " + ini.content);
System.err.println("-1");
return -1;
httpurlconnection.disconnect();
System.err.println("0");
System.err.println(String.valueOf(httpurlconnection.getResponseCode()) + httpurlconnection.getResponseMessage());
return 0;
Exception exception;
exception;
System.err.println("<err><CgiIO>: " + exception);
return 0;
public int postfile(byte abyte0[], int i)
return 0;
public void ClearParameter()
ini.ClearParameter();
public String GetConfigValue(String s)
return ini.GetConfigValue(s);
public int SetConfigValue(String s, String s1)
return ini.SetConfigValue(s, s1);
public String GetConfigValueEx(String s, String s1)
return ini.GetConfigValueEx(s, s1);
public int SetConfigValueEx(String s, String s1, String s2)
return ini.SetConfigValueEx(s, s1, s2);
public String gurl;
public String guri;
private byte buf[];
private String m_charset;
private Ini ini;
private int conlen;
private String tStr;
InputStream in;
OutputStream out;
DataInputStream m_Input;
DataOutputStream m_Output;
private final int SUCCESS = -1;
private final int FAIL = 0;
Socket fw_sktClient;
InetAddress inet;
int err;
int ic;
public CgiIO()
gurl = "";
guri = "";
buf = new byte[3072];
m_charset = "8859_1";
ini = new Ini();
public class Ini
public void ClearParameter()
content = "";
public String GetConfigValueEx(String s, String s1)
if((i_hos = getSessionHead(s)) >= 0 && (i_tos = getSessionTail(s)) >= 0 && i_tos > i_hos)
return getItemValue(s1, i_hos, i_tos);
else
return "";
public int SetConfigValueEx(String s, String s1, String s2)
if((i_hos = getSessionHead(s)) >= 0 && (i_tos = getSessionTail(s)) >= 0 && i_tos > i_hos)
return setItemValue(s1, s2, i_hos, i_tos);
} else
insertString("[" + s + "]" + dlim + s1 + "=" + s2 + dlim, content.length());
return 0;
public String GetConfigValue(String s)
return getItemValue(s, 0, content.length());
public int SetConfigValue(String s, String s1)
return setItemValue(s, s1, 0, content.length());
private int getSessionHead(String s)
for(int i = 0; (i = getNextLeadingBracket(i)) >= 0;)
i_sepline = getNextClosingBracket(i);
t_session = content.substring(i, i_sepline).trim();
if(t_session.equals(s))
return i;
return -1;
private int getSessionTail(String s)
for(int i = 0; (i = getNextLeadingBracket(i)) >= 0;)
if((i_sepline = getNextClosingBracket(i)) >= 0)
t_session = content.substring(i, i_sepline).trim();
if(t_session.equals(s))
if((i = getNextLeadingBracket(i)) > 0)
return i;
else
return content.length();
return -1;
private int getNextLeadingBracket(int i)
i_hol = i;
for(i_tol = content.indexOf(dlim, i); i_tol < content.length() && i_tol > i_hol; i_tol = content.indexOf(dlim, i_hol))
t_str = content.substring(i_hol, i_tol).trim();
if(t_str.charAt(0) == '[')
return i_hol + 1;
i_hol = i_tol + 2;
return -1;
private int getNextClosingBracket(int i)
i_hol = i;
i_tol = content.indexOf(dlim, i);
i_sepline = content.indexOf("]", i);
if(i_sepline > 0 && i_sepline < i_tol)
return i_sepline;
else
return -1;
private String getItemValue(String s, int i, int j)
i_hol = i;
for(i_tol = content.indexOf(dlim, i_hol); i_tol < j && i_tol > i_hol; i_tol = content.indexOf(dlim, i_hol))
i_sepline = content.indexOf("=", i_hol);
if(i_sepline > 0 && i_sepline < i_tol)
t_item = content.substring(i_hol, i_sepline);
if(t_item.trim().equals(s))
return content.substring(i_sepline + 1, i_tol).trim();
i_hol = i_tol + 2;
return "";
private int setItemValue(String s, String s1, int i, int j)
i_hol = i;
i_tol = content.indexOf(dlim, i_hol);
isChanged = false;
for(; i_tol < j && i_tol > i_hol; i_tol = content.indexOf(dlim, i_hol))
i_sepline = content.indexOf("=", i_hol);
if(i_sepline > 0 && i_sepline < i_tol)
t_item = content.substring(i_hol, i_sepline);
if(t_item.trim().equals(s))
isChanged = true;
return replaceString(s1, i_sepline + 1, i_tol);
i_hol = i_tol + 2;
if(!isChanged)
insertString(s + "=" + s1 + dlim, j);
return 0;
private int insertString(String s, int i)
StringBuffer stringbuffer = new StringBuffer(content);
content = stringbuffer.insert(i, s).toString();
return 0;
private int replaceString(String s, int i, int j)
StringBuffer stringbuffer = new StringBuffer(content);
content = stringbuffer.replace(i, j, s).toString();
return 0;
public String content;
private int i_hol;
private int i_tol;
private int i_ho

New and need help with replace harddrive M45-s265

Similar Messages

Maybe you are looking for