New Apple keyboard (aluminium): will it get a "Spaces" button?

Hello all!
I would like to purchase the new aluminium keyboard, but I wonder if, when Leopard is released, there will be a "Spaces" button in addition to "Expose" and "Dashboard" buttons. Is there any possibility this can happen? Should I wait a bit?
Thanks a lot,
Artemiy.

Its certainly possible.
But I wouldn't expect to see it for a while, because for one thing these keyboards have only just been released. So an update of any kind in the near future would seem unlikely. Not least because uptake of Leopard is not going to just happen overnight either.

Similar Messages

New Apple Keyboard. Key jamming.

I wasn't sure which forum to post this in as I couldn't find a one dedicated to the Apple peripherals.
I recently bought one of the new Apple keyboards. My experience with it hasn't been good.
Why? The keys jam -- namely, the return key. They have a tendency to catch themselves under the aluminium casing. 'Xxxxxxxxxxxx...' is not a terrible problem but 'return, return, return, return, return, return, return...' can cause all kinds of nuiscances!
Is this a common problem with all the new Apple keyboards? Did I waste my money on fancy metal and plastic? If I ask Apple to replace my keyboard, how can I be sure the replacement will not have the same defect?
If Apple replace my keyboard, will I have to return my old one before receiving the replacement? If that was the case, I'd be without a keyboard! (...if I bought another one for the interim, what would be the point of having the old on replaced?)
So: should I get the old one replace by Apple? (Will they replace it?) Will I be without a keyboard? Would my money be better spent on a keyboard from another manufacturer? ...What's the best line of complaint? Has anyone experienced the same problems?

no, you call Apple with the complaint,
that take your information, credit card, shipping address, etc.
they ship you a New keyboard and you have 10 days to ship the defective keyboard back to Apple...
If you do not ship the defective keyboard back, they will charge you for the replacement...
Thanks,
den
.

New Apple keyboard on 10.5.8

Hi,
my old keyboard had some keys that lost their function, so I bought a new one yesterday.
I was wondering whether there is any update on getting the new Apple keyboard working properly on 10.5.8. The volume keys do not work and I couldn't figure out how to program them either.
I've read in older posts that the new keyboard will require 10.6.8. That's ridiculous. I won't upgrade to 10.6.8 just because of the keyboard.
Has anyone solved this issue?

It's that simple. Or find a third-party keyboard that will work, if there are any.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.

New Apple Keyboard and Insert Key

I'm using the new Apple Keyboard (http://www.apple.com/keyboard/) and I'm quite happy with it. The only big disadvantage is the missing Insert-Key, the Apple Keyboard has a function (fn) Key, where the insert-key is normally located. I need the insert-key especially for selecting in midnight commander. What would be the best way to remap the insert-key to the fn-key for console and X-Windows?

Here are some relevant other threads:
http://bbs.archlinux.org/viewtopic.php?id=56619
http://bbs.archlinux.org/viewtopic.php?id=55482
These are just threads I've participated in; I'm sure there are more. The bottom line is: check with showkey (in the Linux console) or xev (in X) to see how the fn key is getting recognized. If it's working just like another key on the keyboard, e.g., like space or shift, then you can remap it the same way you'd remap any key. (The process is different for Linux console than for X.) But most likely it's not working just like another key on the keyboard, in which case it will be difficult/impossible to remap it to insert. However, you could always choose another key, or key combination, to remap to insert. Perhaps even a key combination of the form fn+KEY. The kernel won't recognize fn as a modifier like shift or control, but it should recognize SOME fn+KEY combinations as being SOME keyboard keys. For example, on my keyboard fn+left arrow is recognized as Home. I think that as far as the kernel and all the key-remapping tools can tell, I only pressed Home on my keyboard not any combination including left arrow.

New Apple Keyboard on 24" Imac (intel)

Dear appler's,
I just got my new apple keyboard (the ultra fin alum one) It's a great keyboard. But I got problems with the installation. The special key's like the media controllers don't work.
I downloaded and installed the software update (http://www.apple.com/downloads/macosx/apple/firmware_hardware/keyboardsoftwareup date11.html)
I have a 24" iMac (the last white one)
My preferences screen still look's the same it's normal?
P.S. Why no software with the keyboard? I had to go and do a search on google to get the software.

25 views and no reaction.
If you two experience these problems please let me know. Still no reaction from apple.

New Apple Keyboard Incompatible w/OS 10.4.11 is there a Solution?

I have a new Apple Keyboard with Numeric Keypad but it isn't working correctly with my Dual 2.3 GHz PowerPC G5 running os 10.4.11.
The problem is the top row of Function Keys (such as monitor brightness keys, speaker volume and on/off keys, etc) do not work correctly.
Is there any sort of software patch I can download to correct the way the keyboard is programmed so it will work correctly with my computer's OS, or is any other workaround?
Thanks a bunch.

Hello, I consider what Apple did with that KB silly as can be.
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
http://doublecommand.sourceforge.net/

New Apple Keyboard not compatible??

I was looking to purchase a new Apple Keyboard (wired) for a G4 Powerbook but the system requirements say the machine must have OS 10.5 or higher. Is this true? The Apple Keyboard with Numeric Keypad only requires 10.4.
I wouldn't have thought that a keyboard would not be compatible with a G4.
Marion

You can go to the System Preferences --> Keyboard and Mouse and check "Use F1, F2 etc keys..." and F7 and F8 will work.
But I don't know where the function key is on those new keyboards.

New Apple Keyboard- How to Open?

Hi,
I recently got a new apple keyboard (wired), but unfortunately dropped on the ground. One corner is bent and some keys are stuck. I didn't get any helpful advice from apple, so I'm trying to fix it by myself.
Does anyone know how to separate the top aluminum panel?
thanks.

Hello Unison1 and welcome to discussions,
Its the best I can find for you...
http://forum.colemak.com/viewtopic.php?id=234
Hope it helps.
Regards
Ian

New Apple Keyboard Problems

I am not able to use the Dashboard and Exposé buttons on the new Apple Keyboard. I cannot assign them in the preferences nor were they set up initially. I have installed the latest keyboard update (Version 1.1) but it still does not work.
My Setup: An ACD 20" is attached to the PowerBook. The lid is closed.

Alright! I finally got my NEW aluminum keyboard from my local Apple Store (I made sure to call in before going... not that it's a journey to get there, but don't want to waste time if they don't have it) and just installed it with my PowerMac G4 Dual FW 800 model.
I'm typing on it right now instead of my PowerBook.
ALL functions are working for me. What I did was to install the keyboard FIRST by plugging it in to the computer's USB port.
Then I went to Apple's download/support site to get the keyboard update software 1.1...
http://www.apple.com/downloads/macosx/apple/firmware_hardware/keyboardsoftwareup date11.html
...and then restarted my PowerMac. Voila! (It didn't work. It was connected to a USB 2.0 PCI card, so I unplugged it from there to the built-in USB 1.1 port on the PowerMac and then it worked. I put it back to the USB 2.0 card's ports and it worked after that).
F1 and F2 don't work for brightness and contrast modes because I am now using an Envision 17" LCD dual monitor setup (my 17" Studio Display is being used by an older PowerMac G4 533 MHz). I think if it was an Apple LCD display--Studio (plastic) or Cinema (aluminum) versions--it would recognize it. The F3 for Expose and F4 for Dashboard work fine. I haven't tried the DVD player controls for F7 through F9. F10 through F12 work great for sound, even if I have non-Apple external speakers. (Makes me wonder about the monitor controls). Eject key works too. And the REAL eject key, not the F12 hold key down to eject.
So, I'm sorry that you're all having problems. I'd connect it to my PowerBook, but because I'm a very meticulous and exacting person, I don't want to disconnect anything because I have it setup where the wires are hidden and it's all perfect right now.
But as I said in an earlier posting, when I went down to my Apple Store and tried the new keyboards out that were connected to the NEW iMacs, those keyboard functions didn't work!! Irony, huh?
Mine purrs like a Leopard... aha!!
(I love the quiet sound and less exacting pressure needed to type as opposed to my previous black Apple Pro Keyboard. I would never have bought this new flat aluminum keyboard if it didn't match my Envision silver monitors).
By the way, I have a Mighty Mouse (wired version) connected to it too. And yes, the aluminum keyboard I bought was the wired version as well.
Message was edited by: Pismo 900
$49 well spent!! I don't like the wireless version. Looks kind of odd shaped with the extra space on top (for the batteries). They didn't have those in stock anyway.
Message was edited by: Pismo 900 (second edit)
Also, I haven't touched anything in System Preferences. Everything worked after FIRST, connect the keyboard, SECOND, install the software update, THIRD, restart (had to unplug it from PCI USB 2.0 slot to USB 1.1 native port, and then back to USB 2.0 port), and after login, all worked without a hitch.
I don't even want to fool around with system prefs now, since maybe that's what causes the problem (no proof there from me) when you try and tweak or customize your settings.

New apple keyboard 2007 likes to fast-forward by itself

I recently set up my PowerBook as a desktop computer with external monitor, keyboard and mouse, while always leaving the PowerBook shut. My keyboard is the new thin apple keyboard and it seems to work fine after installing the update except that some times iTunes will just start fast forwarding through 4 or 5 songs before finally stopping, This usually happens when I'm not even sitting at the computer, so there is no input into the mouse or keyboard. It seems to be fairly random. Any suggestions?

Thanks for your replies. Ok, so the transport keys can control iTunes, even if it isn't the active application? That's what I've always wanted to do.
And the 2nd working USB port sounds great. It's always frustrated me that I couldn't plug my 1GB USB Flash Drive directly into the keyboard. Now I can do it without fiddling around on the back of the iMac.
You said Expose uses the F3 key, but Expose typically has 3 different functions: All Windows, All Applications and Desktop. How do you these 3 things with the new Apple Keyboard?

New Apple Keyboard Launchpad F4 key does not work

New Apple Keyboard Launchpad F4 key does not work
Hi, I have now got ne new wireless keyboard because my old one broke. I connected the keyboard, the F3 key (Mission Control) functions, the F4 key, especially for Lunchpad does not work, I'm Lion on it, previously on the old keyboard I had in 2009, he occupiedwith Launchpad F5.
Have System Preferences / Keyboard / Keyboard Shortcuts reset everything goes ......... but not yet!!
Maybe someone can help me!!
Thank you
greeting

Hi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan

New Apple Keyboard - Dashboard and Exposé Keys not working

I have the new Apple Keyboard connected to my PowerMac G5 and i have installed the lasted Keyboard Software Update (1.1) from the Apple website. All new function keys are working (the media keys, brightness, etc.) except for the dashboard and exposé keys. I cannot get them to work, not even asign them in the preferences. Anyone else have this problem? Solutions?

I bought the new aluminum keyboard the other day, but didn't notice there was a software update required. Last night a keyboard software package appeared in Software Update, so I downloaded and installed it. Now virtually nothing works in the function keys except brightness and volume. No dashboard where it's supposed to be, no Exposé, and worryingly no F12 Preview In Browser, which I use a lot for Dreamweaver and web design. Dashboard now appears in F13.
I then went and downloaded the 1.1 Update I should have done in the first place, but this has changed nothing. And yes, I think the PowerPC users are being forgotten when this new stuff is made. But...just how many million of us are there?

Startup keys with new Apple Keyboard and MacBook Pro

Upon powering up my Rev. A MBP, I hold down the OPTION key on the new Apple Keyboard to select my startup disk. Strangely, the startup went straight into the default startup disk that I have chosen previously. I didn't get to selection stage.
I tried with the old/white Apple Keyboard and my MBP keyboard and startup disk selector is A-Okay.
I hooked up the new keyboard to my new Mac mini and did the same thing and no problem.
Haven't tried with the rest of the startup keys like C or X yet with the MBP. Wonder is this a software bug between the MBP and keyboard.
Anyone with similar experience?

Actually, startup keys sequences do work with the Apple Wireless Keyboard (the old white one). I know because I have been using it that way with my Macs, PPC and Intel ones.
I tried Command-V, Command-S, Option, T, C and Shift on the new keyboard with my Rev. A MBP and it goes go straight into the Apple logo.
Swapped back to the old Apple Keyboard with my MBP and tried the keys above and no problems whatever so.
Hooked up the new Apple Keyboard to my new Mac mini and did the same keys without problems.
So, my conclusion is there something between the new keyboard and Rev. A MBP. Maybe someone with similar setup should try wha I did and see if they face the same issues.

New Apple Keyboard and iPhoto 08.

It seems that when you install the new Apple Keyboard and download and install the Apple Keyboard update ver 1.1, it breaks iPhoto 08. What I am saying is that it will not let you rename any of your events! I installed it on my MacPro and it happened, then I went to my MacBook and installed the keyboard and the update and the same thing happened!
Anyone else having this problem?

The Fix!
Go to the Finder, go to Macintosh HD, go to the folder called Library, go to the folder called Caches, look for a folder called com.apple.ATS usually the first folder, drag it to the trash. The computer will then ask you for your password and then restart your computer and all wii be fixed!

My 2006 Imac running 10.4.11 is not working well with my new apple keyboard

just bought a new apple keyboard - wired full keyboard - The Funtion keys will not respond as marked.
for example, the f12 key, marked Volume up, brings up my dashboard.
The only function keys that I can change are f1 and f2.
In the keyboard shortcut of Preference, there is not even a listing for volume.
And no, I am not going to update my OS beyond 10.4.11
Help

It's a USB keyboard it should be fine. I have a similar model that works on 10.5.
If it doesn't work you can almost certainly return it (local sales laws apply, so check those).
You could also go to an Apple Store (or any other PC store) & ask them if it could work & ask if it doesn't work can it be returned?
You can search Ebay or Amazon etc for a keyboard that says it supports 10.4, however since that OS is also 10 years old not many manufactures are willing to test an ancient OS that not many people use anymore.
Another option is to find a second hand keyboard from the same era of Mac. Frankly that would be 'icky if it has been used.
Alternately you could try fixing or cleaning yours, but these things don't last forever.
Keyboards & mice generally work.

New Apple keyboard (aluminium): will it get a "Spaces" button?

Similar Messages

Maybe you are looking for