New Apple Keyboard and Insert Key

I'm using the new Apple Keyboard (http://www.apple.com/keyboard/) and I'm quite happy with it. The only big disadvantage is the missing Insert-Key, the Apple Keyboard has a function (fn) Key, where the insert-key is normally located. I need the insert-key especially for selecting in midnight commander. What would be the best way to remap the insert-key to the fn-key for console and X-Windows?

Here are some relevant other threads:
http://bbs.archlinux.org/viewtopic.php?id=56619
http://bbs.archlinux.org/viewtopic.php?id=55482
These are just threads I've participated in; I'm sure there are more. The bottom line is: check with showkey (in the Linux console) or xev (in X) to see how the fn key is getting recognized. If it's working just like another key on the keyboard, e.g., like space or shift, then you can remap it the same way you'd remap any key. (The process is different for Linux console than for X.) But most likely it's not working just like another key on the keyboard, in which case it will be difficult/impossible to remap it to insert. However, you could always choose another key, or key combination, to remap to insert. Perhaps even a key combination of the form fn+KEY. The kernel won't recognize fn as a modifier like shift or control, but it should recognize SOME fn+KEY combinations as being SOME keyboard keys. For example, on my keyboard fn+left arrow is recognized as Home. I think that as far as the kernel and all the key-remapping tools can tell, I only pressed Home on my keyboard not any combination including left arrow.

Similar Messages

  • New Apple Keyboard Launchpad F4 key does not work

    New Apple Keyboard Launchpad F4 key does not work
    Hi, I have now got ne new wireless keyboard because my old one broke. I connected the keyboard, the F3 key (Mission Control) functions, the F4 key, especially for Lunchpad does not work, I'm Lion on it, previously on the old keyboard I had in 2009, he occupiedwith Launchpad F5.
    Have System Preferences / Keyboard / Keyboard Shortcuts reset everything goes ......... but not yet!!
    Maybe someone can help me!!
    Thank you
    greeting

    Hi,
         Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
    - Quit System Preferences (if open)
    - Delete this document to remove a carry-over mapping error.
    - Then logout
    Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
    Note2: This document is in your users preferences folder.
    ~/Library/Preferences/com.apple.symbolichotkeys.plist
    -Alan

  • New Apple Keyboard and iPhoto 08.

    It seems that when you install the new Apple Keyboard and download and install the Apple Keyboard update ver 1.1, it breaks iPhoto 08. What I am saying is that it will not let you rename any of your events! I installed it on my MacPro and it happened, then I went to my MacBook and installed the keyboard and the update and the same thing happened!
    Anyone else having this problem?

    The Fix!
    Go to the Finder, go to Macintosh HD, go to the folder called Library, go to the folder called Caches, look for a folder called com.apple.ATS usually the first folder, drag it to the trash. The computer will then ask you for your password and then restart your computer and all wii be fixed!

  • Startup keys with new Apple Keyboard and MacBook Pro

    Upon powering up my Rev. A MBP, I hold down the OPTION key on the new Apple Keyboard to select my startup disk. Strangely, the startup went straight into the default startup disk that I have chosen previously. I didn't get to selection stage.
    I tried with the old/white Apple Keyboard and my MBP keyboard and startup disk selector is A-Okay.
    I hooked up the new keyboard to my new Mac mini and did the same thing and no problem.
    Haven't tried with the rest of the startup keys like C or X yet with the MBP. Wonder is this a software bug between the MBP and keyboard.
    Anyone with similar experience?

    Actually, startup keys sequences do work with the Apple Wireless Keyboard (the old white one). I know because I have been using it that way with my Macs, PPC and Intel ones.
    I tried Command-V, Command-S, Option, T, C and Shift on the new keyboard with my Rev. A MBP and it goes go straight into the Apple logo.
    Swapped back to the old Apple Keyboard with my MBP and tried the keys above and no problems whatever so.
    Hooked up the new Apple Keyboard to my new Mac mini and did the same keys without problems.
    So, my conclusion is there something between the new keyboard and Rev. A MBP. Maybe someone with similar setup should try wha I did and see if they face the same issues.

  • New Apple keyboard and flash drive

    Just brought a new keyboard home, the keys are excellent, been previously using a Macalley Icekey...and will be promptly returning to it. When I plug in my Cruzer Titanium 2.0 thumb drive into it I get an error: USB Low Power Notice, the USB device cannot operate because it needs more power than is available.
    Pity, I thought the keyboard supported USB 2.0.

    Me too! When I read the specs on the keyboard I was excited, thought perhaps I'd see some increased speed copying files over...not an insufficient power warning. The USB ports on the iMac are all filled and I enjoy the convenience of simply sliding it in the side of the keyboard. The Icekey supports it. Beats me. Great action on the keys though.

  • New Apple Keyboard and iMAC

    Okay, not sure if I am posting in the right place but here goes. Picked up two of the new flat keyboards from the Mac Store. Hooked them up, downloaded the keyboard software, and fully restarted the system. It works great.
    My problem is when, during restart, I try to hold down option to switch over into Vista. Simply, nothing happens. The system starts up in MAC OS as if Im not holding down the key at all.
    What do I do? Plug in the old keyboard and sell these on Ebay lol?

    I had the same thing as you (that my BT mouse & keyboard were working but then after a while they started to act up -mouse freezing on&off, keys sticking-).
    In my case the 'before' and 'after' was actually running the setup on the Bootcamp Utility disk that contains all the Bootcamp drivers. There must be a rogue driver on there that messed up my system. I ended up doing a reinstall and only installing the bluetooth drivers (that are also on the same Utlity disk, but in the $WinPEDriver$ folder. This at least worked for me.
    However, by doing so I did not get the handy Bootcamp utility in the lower left corner of Windows that allows me to conveniently reboot and switch from Win8 to MacOS. I am trying to figure out if I can install that utility separately without all the drivers being automatically installed as well

  • New Apple keyboard and the keyboard shortcut tab in prefpane ?

    Hi.
    So I bought a new Apple "slim" kayboard, I'm pretty happy with it. The only thing I don't get is that I can't access the "keyboard shortcut" tab in the Keyboard and mouse prefpane.
    When I click it, the tab turns grey but I can't enter.
    Is it normal?
    ps. of course I didn't the keyboard software update.
    Thanks

    That's really strange. Are you sure this has to do with the keyboard? Does it misbehave even after restarting the compter? If you remove the keyboard and plug in your old one instead, does this area of System Preferences work normally again?

  • New Apple keyboards and OS9

    I notice that the current Apple keyboards sold by Apple stores say they require OSX 10.2.
    Are there particular functions that won't work on OS9, or will the keyboards not function at all.
    (I'm using an old 233 Bondi iMac running OS9.2.2 for the kids and the original keyboard is starting to creak.)
    iBook G4   Mac OS X (10.3.9)  

    Apparently it was only about the dedicated expose key which obviously won't do what it says in OS9. Information from Apple Store, Birmingham.

  • New Apple Keyboards and G5

    I have just purchased one of the new auminium keyboards. The special features ie for Dashboard expose - sound etc. Apple support told me these new features only supported on the new iMacs. This is not stated in apple's marketing material for these keyboards. Is this the case or is it it bug or fix needed. Still a nice keyboard though

    Apple support told me these new features only supported on the new iMacs.
    What a load of tosh! Strange that you're having problems though - the 'special' buttons are all working fine for me with the 1.1 update..
    My problem is that the G5 doesn't always see the new keyboard (or mouse) at startup, & it takes unplugging/re-connecting the usb 2 or 3 times (whilst the G5's powered up & waiting at the login-screen) before the devices are finally recognised by the Mac.
    What about you guys on this point?
    Thanks,
    Jason

  • I purchased a new Apple Keyboard and now the controls for the top row (the f1,f2, f3, etc...) will not function properly.

      I cannot use expose, itunes controls, or anything.   When I hit the controls for itunes, it activates either expose or the dashboard or something else.  I can deactivate this in system settings under the keyboard controls, and I can even rebind the keys in there, however there seems to be no way for me to get my audio controls to work.  How do I get skip, play/pause, mute, and volume controls to work again?  I can't find anywhere I can go to bind the f-whatever keys to those functions again.  This is very frustrating as I constantly use these audio controls.

    I guess you have been to System Pres -> Keyboard? Use this to see if it changes:

  • New Apple Keyboard - Dashboard and Exposé Keys not working

    I have the new Apple Keyboard connected to my PowerMac G5 and i have installed the lasted Keyboard Software Update (1.1) from the Apple website. All new function keys are working (the media keys, brightness, etc.) except for the dashboard and exposé keys. I cannot get them to work, not even asign them in the preferences. Anyone else have this problem? Solutions?

    I bought the new aluminum keyboard the other day, but didn't notice there was a software update required. Last night a keyboard software package appeared in Software Update, so I downloaded and installed it. Now virtually nothing works in the function keys except brightness and volume. No dashboard where it's supposed to be, no Exposé, and worryingly no F12 Preview In Browser, which I use a lot for Dreamweaver and web design. Dashboard now appears in F13.
    I then went and downloaded the 1.1 Update I should have done in the first place, but this has changed nothing. And yes, I think the PowerPC users are being forgotten when this new stuff is made. But...just how many million of us are there?

  • Brand new Macbook Pro not pairing with Apple Keyboard and mouse!

    Hi all, I have a brand new Macbook Pro and an older wireless Apple Keyboard and Mouse (that were being previously used with my imac G5).
    Now I want to use these for this macbook. I am finding that they are being recognised but not pairing up?
    Do you need to stop the previous pairing with the imac before they will pair with the Macbook?
    Or do I need to update specific software? (I would have thought it has all the necessary updates already installed).
    I am running Snow leopard.
    I have brand new batteries in the keyboard and mouse.
    I really appreciate any helpful advice. Sorry if the answer is obvious!
    Thanks

    Hi there, i had a problem pairing an Apple wireless keyboard with my MacBook pro but managed to solve it.
    The default passkey option in Bluetooth setup assistant is 'automatic' which will (if the MacBook can 'see' the keyboard in the first instance) then say something like 'your device may prompt you to enter the following passcode 1234 5678'
    Obviously the keyboard doesn't provide any feedback - I went ahead and typed the number and hit the return key a number of times - the MacBook then displayed a 'pairing failed - you may have entered the incorrect passkey' message.
    What i was doing wrong was keying only numbers - when i keyed 1234[SPACE]5678 + RETURN pairing worked.
    I had thought the 'gap' in the passcode was to make it easier to read, not that it implied a space in the passcode.
    Hope that helps.
    Simon

  • New Apple Keyboard. Key jamming.

    I wasn't sure which forum to post this in as I couldn't find a one dedicated to the Apple peripherals.
    I recently bought one of the new Apple keyboards. My experience with it hasn't been good.
    Why? The keys jam -- namely, the return key. They have a tendency to catch themselves under the aluminium casing. 'Xxxxxxxxxxxx...' is not a terrible problem but 'return, return, return, return, return, return, return...' can cause all kinds of nuiscances!
    Is this a common problem with all the new Apple keyboards? Did I waste my money on fancy metal and plastic? If I ask Apple to replace my keyboard, how can I be sure the replacement will not have the same defect?
    If Apple replace my keyboard, will I have to return my old one before receiving the replacement? If that was the case, I'd be without a keyboard! (...if I bought another one for the interim, what would be the point of having the old on replaced?)
    So: should I get the old one replace by Apple? (Will they replace it?) Will I be without a keyboard? Would my money be better spent on a keyboard from another manufacturer? ...What's the best line of complaint? Has anyone experienced the same problems?

    no, you call Apple with the complaint,
    that take your information, credit card, shipping address, etc.
    they ship you a New keyboard and you have 10 days to ship the defective keyboard back to Apple...
    If you do not ship the defective keyboard back, they will charge you for the replacement...
    Thanks,
    den
    .

  • New apple keyboard Fn keys don't work

    Hi,
    Posting this in PowerMac G5 and OSX Tiger as I am not sure if it is a hardware or software issue.
    I just recently bought a new aluminium apple keyboard and am very very happy. EXCEPT:
    When I first plugged it in, all the hotkeys/fn keys (the default ones such as play/pause/skip track/volume/brightness) all worked fine... but I had 3rd party SizzlingKeys installed... that sprang into life, and suddenly all the Apple default key functions stopped working.
    I uninstalled Sizzling keys, trashed all relevent files, restarted... nothing.
    Tried to reset them via SystemPreferences... didn't work.
    How can I make these come back to life?
    Thanks

    I've used SizzlingKeys in the past. It was novel for a few months but conflicted with keyboard commands I was used to in other applications. The iTunes library on that computer is no longer used. However, I see that SizzlingKeys 1.7.2 is still installed. Preferences depict only two SizzlingKey options enabled: Play/Pause and Almost Mute. The rest have their checkboxes clicked off. Here, at least, there is no conflict with the Apple keyboard functions on that G4 computer running Panther.
    It seems awfully odd that a removed application could still be causing a conflict. If SizzlingKeys is the culprit and nothing else worked, I (perhaps not you) would be inclined to reinstall it. Whatever iTunes actions are mapped to F1 through F4 and F7 though F12 can be disabled or changed within the SizzlingKeys Preference Pane. There is even an option to disable SizzlingKeys altogether. Should you then decide to remove it again, do so after disabling everything in the Preference Pane. Between this and the Keyboard Shortcuts button labeled "Restore Defaults" (Keyboard & Mouse Preference) the problem should be resolved.
    (FYI: If you were using a notebook computer, there would be another option to toggle that requires the extra Fn key to the right of the Control key to be pressed for access to special Apple functions. But since you posted this in the G5 forum, this apparently doesn't apply.)

  • New apple keyboard Fn keys not working

    Hi,
    Posting this in PowerMac G5 and OSX Tiger as I am not sure if it is a hardware or software issue.
    I just recently bought a new aluminium apple keyboard and am very very happy. EXCEPT:
    When I first plugged it in, all the hotkeys/fn keys (the default ones such as play/pause/skip track/volume/brightness) all worked fine... but I had 3rd party SizzlingKeys installed... that sprang into life, and suddenly all the Apple default key functions stopped working.
    I uninstalled Sizzling keys, trashed all relevent files, restarted... nothing.
    Tried to reset them via SystemPreferences... didn't work.
    How can I make these come back to life?
    Thanks

    I have regained the use of brightness/expose/dashboard/volum... but still no luck with the play/skip keys:
    http://discussions.apple.com/thread.jspa?messageID=8395938

Maybe you are looking for

  • Unable to create Agent in AM 8

    1) I have just installed OpenSSO v1 build3, using the embedded opends as data store, when I was trying to create a agent under Access Control=>Realm=>Subject=>Agent, I got this error: Error: Plug-in com.sun.identity.idm.plugins.ldapv3.LDAPv3Repo does

  • Converting PL/SQL with OE S Fields for 11i

    We recently moved to 11i and I am having trouble converting a PL/SQL report. This is part of an exception report (below) that we have and I am not exactly sure how to convert it in 11i to do what it did in 11.0.3. Particularily I am not sure about ho

  • Hi expert,Incorrect connection string for addon

    hi expert I am getting error when connect  my addon in client pc. my addon working fine in server at client side. but in client i m getting error "Incorrect connection string for addon".in my addon i am using crystal report and two sap b1 user form.

  • Changing path of multiple files in iTunes.

    I have a fun one for you. Every time I have an update for iTunes, it decides that it randomly no longer wants to recognize certain songs on certain playlists on my iPhone. The latest episode decided that of the 25k songs in my library it wanted to do

  • FA seeded BA and workbooks

    Good morning, Database 11g (11.1.0.7.0) Discoverer Administrator (11.1.1.3.0) E-Business Suite 12.1.3 Discoverer schema is 'DISCO_F' Wa have already custom BAs, folders and workbooks. We would like to implement the seeded Business Areas and workbooks