New apps does not starts

I had this problem for a while now with small applications for OSX Mountain Lion that doesnt need to run installation. I can't start them, after double clicking nothing happens. When I do the same on another OSX computer they work fine. Does anybody know what I can do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • IBook app, does not start !

    Hi
    The iBook app does not start !
    I can't get into the library, it takes a minute at the gray background without shelfs, and then goes out.
    I tried somethings like:
    -remove books by iTunes and re sync them.
    -reset the phone
    -turning off and on the phone
    but still have problem.
    Safa

    Howdy Safa,
    If you are having an issue with your iPhone's iBooks application not being able to launch, and you have already tried resetting and restarting the iPhone, I would suggest the next step would be to back up any data on your iPhone and restore it as a new device. See this article for directions -
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT201250 Time Machine App does not start under OS X Lion

    I tried to restore an item from my back-up, however the Time Machine App does not start.
    I use the latest version of OS X Lion 10.7.5 (Build 11G63).
    I used the work around by opening my back-up volume with the finder and copied the wanted item.
    However, this is not the correct approach I think.
    Does anybody have a solution to my problem?

    Just the last addition to my question.
    The modifications of the access rights took very, very long. In the end I cancelled the process.
    Nevertheless, time machine now works correctly. As far as I can see it.
    If annybody runs into similar problems. The solution is I think just to modify the access rights on the back-up volume to read and write access for everyone.
    Probably OS X Lion added an undocumented feature to the time machine.

  • Adobe Reader for the BlackBerry PlayBook Showstopping Issue: App does not start

    Hello;
    I would like to report an issue with the Adobe Reader app for the BlackBerry PlayBook which renders the application fully unusable. This issue occurs everytime. This issue has been tested and verified to occur in two distinct BlackBerry PlayBook devices.
    Here is a screenshot stating what version (10.0.3.325) of the Adobe Reader app I have installed:
    This, I understand, is the latest version for my platform. Unfortunately, the application does not start. Attempting to run it results in a blank screen after showing the BlackBerry logo. The blank screen can be seen in the following screenshot:
    It is also strange that the application does not appear in the Application Permissions list, as seen in the following screenshot:
    Is there a fix for this showstopping issue? What steps should I take?

    Same issue here.  Playbook support knows about it, and referred to Adobe.  The Adobe forum has this comment.  Looks like our Playbooks are abandoned as a platform.
    "Mar 4, 2012 7:20 PM
    As the tablet market continues to evolve, we continue to evaluate how to best support the market and where to focus on our resources. Because of this,  Adobe has decided to end its support of the  RIM QNX Playbook devices in March 2012.  This means the ability to create new applications for submission to the RIM store will no longer be possible in Adobe Viewer Builder as well as the ability to rebuild existing targets for new releases of Digital Publishing Suite. Any existing QNX targets will be removed from the manage view inside Viewer Builder".

  • Errors on startup - app does not start

    I tried to start photoshop today and received two errors and the app will not start. I tried un-installing and re-installing (cloud apps), but I encounter the same errors
    Can't post screen shots - you can't read them. First error says "Could not load actions as an unexpected end of file was encountered" The second one says "Could not initialize photoshop because the preferences file was invalid (it has been deleated)"
    any idea what I could try. I haven't installed any new software. PS worked a few days ago, other programs working OK, even cloud stuff

    Delete the preferences in the prefs folder:
    Important Directories
    and since this may indicate that you have systemic issues that damage files, you might wanan read some of that and act accordingly:
    Installation Preparations
    Work File Safety
    Mylenium

  • TS3960 After upgrading to Lion server 10.7.4, Server.app does not start.

    I upgraded from 10.6.8 Server.  The Mac OS 10.7.4 starts fine, but when attempting to launch 'Server' (which does appear in the launchpad) nothing happens (the application does not start).
    I checked for this:
    sh-3.2# sudo launchctl list | grep -q com.apple.servermgrd && echo loaded || echo not loaded
    loaded
    Thank you in advance for any help on this front. AV

    I got solution.After I reset the Server.App i could able to login the Server.App.
    For reference : http://krypted.com/mac-os-x-server/hosed-your-mountain-lion-server-reset-it/

  • My new iphone does not start up

    i bought the iphone6 yesterday and I opened it today. It does not start up and it shows just a low battery sign and then it turns black. What shall i Do?

    Well, Apple's policy on the iPhone warranty outside of the country where it was purchased is:
    IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
    Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
    So, it is likely that you will not be able to get it serviced here. However, it would be worthwhile to contact your local Apple Store to see if they will take a look at it for you.
    Cheers,
    GB

  • Service created with New-Service does not start

    Hello,
    I am trying to create a working service using the New-Service cmdlet. I tried a bunch of different examples, I found on the internet like this one from technet:
    new-service -name TestService -binaryPathName "C:\WINDOWS\System32\svchost.exe -k netsvcs" -dependson NetLogon -displayName "Test Service" -StartupType Manual -Description "This is a test service."
    The service gets created and is listed in services.msc and Get-Service but I cannot start it. Ever. The state changes to "Starting" but that's all.
    I tried it on different machines with different Windows- and PowerShell versions using elevated PS-consoles.
    Thanks,
    Manuel

    Hi Manuel,
    I tested on my client, and I also keep getting the error 1053, which indicates timeout and the new created service can not be started during the limit time, so you can try to change the service time limit, please note this needs to change registry value,
    Using Registry Editor incorrectly can cause serious problems:
    In Registry Editor, locate, and then right-click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    a.Point to New, and then click DWORD Value. In the right pane of Registry Editor, notice that New Value #1 (the name of a new registry entry) is selected for editing.
    b.Type ServicesPipeTimeout to replace New Value #1, and then press ENTER.
    c.Right-click the ServicesPipeTimeout registry entry that you created in step c, and then click Modify. The Edit DWORD Value dialog box appears.
    d.In the Value data text box, type TimeoutPeriod, and then click OK
    Refer to:
    Error 1053: The service did not respond to the
    start or control request in a timely fashion - When trying to start the server service.
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang

  • My new MacBook does not start

    My MacBook will not start, I am getting a gray or light blue screen and nothing happens.
    Apparently this has a tendency to happen when the ITunes and Photo Booth are open within one session before I shut down the computer.
    So far every time that I start the computer I have to press and hold the (control alt P R) keys, then the laptop starts and I get the apple in the screen and the rotating gear.
    Please advice what to do?
    I should point out that if I open other programs in a session and then shut down the computer, it does start normally when I restart.

    The 4 times chimes is my old habit since os 7.5.3 sorry if that sound amusing to you, on apple sites 2 times is enough.
    It will be the last option to do the re-installation.
    But it usually help better, and you can narrow down the problem to other factor since the OS X is well installed and fresh.
    I prefer install for the first time method, but you can choose archieve and install if you want to save your data there. Any method you choose make sure you back up your data before doing so.
    But do you have a good connection in Thai, since I suggest you to update all the updater after you done the installation process.
    Good Luck

  • New Playbook does not start up

    i just bought a Playbook from Walmart.
    The screen is black. When I charge it a red light stays on for a few seconds then turns white.then goes off  (all in a few seconds)
    Can anyobne help me start this new machine?
    Has anyone received a broken machine from Walmart
    BB custome\r support say I am not entitled to any free customer support!

    http://supportforums.blackberry.com/t5/BlackBerry-​PlayBook/Play-book-wont-power-up-or-light-just-bli​...
    I saw this post is similar to your PB problem, you may get some information at this post.

  • Some apps does not start automatically at start up

    Hi guys.
    I've noticed a little problem with my automatical start up apps. I have a few there: Growl, Dropbox, Fantastical... and also Quicksilver, but it doesn't load as the others. I have to run it after the whole start up.
    I have the "Start at login" field marked in the Quicksilver preferences panel.
    Any ideas?
    Thanks!

    I think the problem is related to the quarantine bug in osx-lion.
    http://reviews.cnet.com/8301-13727_7-57374676-263/workarounds-for-quarantine-bug -in-os-x-lion/
    the developer of herald send me some code i had to enter in console, and it worked!

  • [Lollipop] App does not start: screen freezes

    This might be a bug because I noticed once I plug the charger in my Z2 and try to start an app (say Clash of Clans) a white screen just slides through and nothing happens. I just press the multi tasking button to force-close it. Also tried to force stop the app before relaunching it, same problem. Tried to restart the phone via the power button, however it takes longer time than normal before it boots up again, like 3 to 5 minutes. What could be the cause of this issue?

    Try Clearings the SmartConnect app data.
    How to clear data on apps.
    From your Home screen
    1. Tap the Application screen icon.
    2. Find and tap Settings > Apps.
    3. Swipe to the All tab.
    4. Find and tap on the smartConncet app.
    5. Tap Force stop > Clear data.
    6. Restart the phone

  • MSI Z77A - GD55 mother board. Does not start.

    Hi
    My completely new computer does not start. It's completely dead. (worked fine yesterday)
    There is a power button / lamp on the mother board, it blinks continually when power is connected. Nothing at all happens when I press the computers power button or the power button on the mother board.
    Is this a problem with the mother board or could it be the power supply that has failed?
    thanks for any help at all

    My system:
    Cool Master HAF X Big Tower
    MSI Z77A - GD55 Socket 1155
    XFX ProSeries Core Edition 550W PSU
    Intel  LGA1155 Core i7 - 3770
    Corsair Cooling Hydro H60 CPU cooler
    Corsair XMS3 1600MHz 16GB Vengance CL9
    Gainward GeForce GTX670 2GB GDDR5 PCI-E
    Samsung SSD 830 Series 256GB BK SATA3.0
    I have yet not tested to do any changes on the hardware.  I have only tested switching power cable. (not sure why it would help, but I tried it anyway)

  • I installed the new version of LIghtroom (2015) from Creative Cloud.  Creative Cloud says I successfully installed the new version.  However, the shortcut icon that was installed does not start the new version.  I've also gone to the properties link itsel

    I installed the new version of LIghtroom (2015) from Creative Cloud.  Creative Cloud says I successfully installed the new version.  However, the shortcut icon that was installed does not start the new version.  I've also gone to the properties link itself but, no success in starting.  How do I launch the new version?

    Thank you, toinimj59.  I did this part and the installation completed (apparently it didn't earlier--included an acceptance of the standard terms and conditions...
    Solution 1: Sign out from Creative Cloud desktop app and sign back in
    Sign out from, and back in to, the Creative Cloud desktop app. Click here for instructions
    Launch Lightroom.

  • My 2011 MacBook Pro does not start and stop after the apple appear, they said that the problem is a video problem and need to change the logic board. Cost almost same to buy a new one. Somebody have the same problem?

    I have a MacBook Pro early 2011. Does not start. After the apple show, a blank screen appear. The service said that the problem is with the video plaquue in the logic board. Need to change. Cost lmmost the same than a new MacBook Pro. Somebody has the same problem? What we can do?

    I hate to break this to you, but life isn't fair. If your job is that critically in need of a computer, then you should have a spare to use for just this kind of situation or have your employer provide you with a computer to use.
    Computers break down, just like cars. If your car breaks down do you curse the car maker or get it fixed? Surely, you paid more for your car than the computer.
    This is reality. Best get used to it because it won't get any better.

Maybe you are looking for

  • How do I update iphone 4 with ios 4.2?

    How do I update iphone 4 with ios 4.2?

  • **Lost Music-Files**

    Will someone pls. instruct me how to recover the songs that I had b4 I used Itunes..I had 29 songs; once I used Itunes, it deleted the songs that I already had...Pls. Help this 13yr-old with no Ipod experience..Thx..

  • Which patches need to be installed

    I recently install 8.1.7.0.0 database sever. When I search for patches on Oracle Web, there are patches for 8.1.7.0, 8.1.7.1, 8.1.7.2, 8.1.7.3. Under each release, there are 4-5 patches. Should I install all the patches one by one or should I only in

  • Transaction RFC fails to send data and no errors

    I am using a function module in background task to enable TRFC call. I don't get any error and the data does not go to the external Remote system. I don't see any data in SM58 or ARFC* tables. Any help is appreciated. Thanks, Vijay

  • Dynamically Populate a Panel Dashboard in a Fragment

    I am working with a customized Panel Dashboard in a fragment (jsff).  The user can customize the dashboard (re-order panel boxes, define number of columns, add/remove panel boxes, etc.) and our goal is to persist these customizations so they are avai