New archlinux installation working on native but not on VMWare.

Hello.
So basically, I installed Arch on a USB HDD. I did two partitions : One NTFS of 400gb, and one of Ext4 of 100gb.
I installed Arch using the x86 live-cd, and everything worked well, I can perfectly boot on it.
But here's the problem : I want to use it using VMware. I created a "virtual" machine using a physical disc, and no matter what, it won't boot.
"Waiting 10 seconds for device /dev/disk/by-uuid/loluuid ...
Root device '/dev/disk/by-uuid/loluuid' doesn't exist. Attempting to create it.
ERROR: Unable to determine major/minor number of root device '/dev/disk/by-uuid/loluuid'."
I supposed it comes from some USB driver isn't loaded or something, but I can't figure out what to do.
Is there anything I can do so I can use it on VMWare ? I really need to use the bridged internet.
Thanks already,
cyb.
Last edited by cyb (2011-01-31 16:27:21)

Hello.
I tried it with "kernel /boot/vmlinuz26 root=/dev/sda1". It isn't working any better.
Last edited by cyb (2011-02-01 12:37:52)

Similar Messages

Same SMTP Relay problem but new reasons. Works with most but not with few

I am writing a mail server. My applications sends mail directly to the SMTP server of recipient using MX Record. I find out the MX Record of the recipients and then using Java Mail send mail to that MX Record.This application is working fine and it has worked for thousand or so SMTP Server successfully.
There are couple of servers (SMTP of recipients) those reject the mail saying SMTP Relaying Prohibited by the Administrator and further says Invalid Mail Address Destination. I am wondering that the recipients belong to that same domain (MX record). I am able to mail them from yahoo or hotmail. I am not trying to use that SMTP for relaying, infact that mail account is registered in that particular SMTP Server.If that server is using SMTP Authentication, how come yahoo or hotmail authenticate for sending mail to their user.
I am sending all genunine parameters like senders mail address etc. I have tried setting various. Can anyone help me where I am missing?

My applications sends mail directly to the SMTPserver of recipient
using MX RecordYou don't send mail to the SMTP server you send it to
the pop3 server, anyway...
Nopes, you do send mail to the POP3 server. POP (Post Office Protocol) is used for fetching mails. Se RFC 1939 http://www.faqs.org/rfcs/rfc1939.html for more detailed information. Usually the mail agent contacts the local SMTP server and it queues it for delivery to other SMTP server that it can find via the MX record, trying the one with the highest priority first which incendently is the one with the lowest number.
If that server is using SMTP Authentication, howcome yahoo or
hotmail authenticate for sending mail to theiruser.
Hotmails' SMTP server will let you send to anybody,
most other private SMTP servers generally will
restrict the domains you can send to.
I'm a little confused as to what your problem is you
are connection to SMTP servers to send individuals
emails? why not just use on SMTP server to send to all
He is making a SMTP server.
Back to the original question:
Since you are checking the MX record for the address it should not be considered to be a relay of mail. The only reason this should happen is if the RCPT is set to something wierd like
<@HOSTA.ARPA,@HOSTB.ARPA:[email protected]>See RFC 0821 for more information. I am not sure if RFC 0821 is obsoleted, but this should still apply.
Regards,
Peter Norell

New apple ID - works for purchases, but not updates

I recently changed my apple id to a .me account. It works fine for purchasing. However when I try to update apps on my iPad or iPhone it still wants a password to my old ID which is no longer accessible. How can I get the update function to prompt using my new .me account?

Hi Taylorfam6,
Welcome to the Support Communities!
The article below may be able to help you with this. You may need to sign out of your Facetime and Message accounts, and sign back in with the correct Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Your iPhone telephone number is linked to your Apple ID when you sign in to FaceTime or iMessage. This allows you to use your iPhone number with FaceTime and iMessage on other iOS devices.
You can sign in to your Apple ID on an iPhone by tapping Settings > FaceTimeand Settings > Messages > Send & Receive. On iOS devices, find out which addresses are enabled with FaceTime and iMessage by tapping:
Settings > Messages > Send & Receive > You can be reached by iMessage at:
Settings > FaceTime > You can be reached by FaceTime at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iPhone automatically registers your phone number for use with FaceTime and iMessage during activation.
To use FaceTime with your Apple ID, navigate to Settings > FaceTime and tap "Use your Apple ID for FaceTime."
To use iMessage with your Apple ID, navigate to Settings > Messages > Receive At and tap "Use your Apple ID for iMessage."
When you enable FaceTime or iMessage with an iPad or iPod touch, you will need to enter a valid Apple ID and password. Other users will be able to contact you on FaceTime and iMessage using this email address.
Cheers,
- Judy

Direct URL Working In IE but not with New Domain

Hey Guys
Something very weird here.
This music player for www.arikecansing.com works in Mozilla
but not IE. The site is being hosted here
www.tahnaiya.com/clients/arike and that link works in IE but not
under the other domain www.arikecansing.com Weird huh? Does anyone
know why this is?
The playlist.xml file is this but do note that i did change
the mp3 name so the mp3 cannot be downloaded. This site is for my
client. I would extremely appreciate any help
<?xml version="1.0" encoding="utf-8" ?>
<mp3s>
<file name="song 1" file="
http://www.tahnaiya.com/clients/arike/music/everything.mp3"
/>
</mp3s>
I did try changing the file to this but it still didn't work
<?xml version="1.0" encoding="utf-8" ?>
<mp3s>
<file name="song 1" file="
http://www.arikecansing.com/music/everything.mp3"
/>
</mp3s>

I am not sure...but have you heard that NS 6/Mozilla are use based on standards. So they dod not support some of the proprietary JS/CSS/Misc functionality of IE or NS 4.0+ versions. You can read more about the JavaScript differences on Netscape's NS6 evangism site. Maybe you are missing something. I think I remember reading something about getElementByID/Name ...

Flash 10 works in FF but not Safari, OS X 10.5

About a week ago flash stopped working in Safari and both firefox and safari started bugging me to install a newer version. Muttering, I went to the download page and downloaded the latest, which claims to be for Safari, Opera, and firefox.
Installation completes fine with no errors. Firefox works. But in Safari, I just get the usual 'no flash installed, would you like to download it?'
I've downloaded and installed multiple times, no dice. Plug-ins are enabled on Safari. I do not have settings folders to delete--/Library/Application Supprt/Adobe has no flash player folder, only Acrobat, Updater6, and Help.
This whole thing is a black box and I don't see what else to do. Installation completes and there's no way to verify anything. Any ideas would be welcome.

Thanks! BTW I'm also having trouble updating Adobe Reader. I have 9.4.0 and want to update to the new Adobe Reader X. I keep getting Error 1402 which refers to the registry keys. I am unable to completely uninstall the old version. After receiving the error message it reloades the older version. I read about how to modify the registry to accept it but I believe this is a very wierd way to have to get an update loaded. Any suggestions?
Date: Mon, 27 Dec 2010 10:34:22 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player works in IE8 but not Safari
Hi Bruce, Adobe Flash Player is Installed separately into IE, since Windows uses the ActiveX Control. Firefox and other non-IE
browsers must use the plugin Installer.
This is the Adobe site :
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Hope that explains it.
Thanks,
eidnolb
>

Rollovers works in Camino but not Safari

Does anyone know why my rollover stopped working in Safari,
but it works fine in IE and Camino?
I did a simple rollover to display before and after images
and I swear, yesterday when testing it in Safari It worked fine.
Today it doesn't work on any of my 3 macs here. It displays fine on
WinXP and IE, and in Camino on my Macs.
here is the page.
www.chipwillis.com/retouch
Any ideas are most appreciated.

Thanks! BTW I'm also having trouble updating Adobe Reader. I have 9.4.0 and want to update to the new Adobe Reader X. I keep getting Error 1402 which refers to the registry keys. I am unable to completely uninstall the old version. After receiving the error message it reloades the older version. I read about how to modify the registry to accept it but I believe this is a very wierd way to have to get an update loaded. Any suggestions?
Date: Mon, 27 Dec 2010 10:34:22 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player works in IE8 but not Safari
Hi Bruce, Adobe Flash Player is Installed separately into IE, since Windows uses the ActiveX Control. Firefox and other non-IE
browsers must use the plugin Installer.
This is the Adobe site :
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Hope that explains it.
Thanks,
eidnolb
>

Tiger Server: Default MySQL works for phpMyAdmin but not command line ? ? ?

Greetings all,
I followed the excellent instructions at
http://discussions.apple.com/thread.jspa?threadID=132783&tstart=0
on upgrading PHP to version 5 and getting (the preinstalled) MySQL setup with phpMyAdmin
I can connect through the phpMyAdmin, create new dbs, etc. Problem is that now I CAN'T connect from the command line. (I originally set my new root password from the command line and that's the last time I could connect from there!
Now I get the dreaded ERROR 2002 when I attempt:
/usr/bin/mysql -h localhost -u root -p
If I use the IP address or hostname instead of "localhost" (after -h) I get a ERROR 2003. Dropping the -h and hostname from the line above still gets me a ERROR 2002.
My phpMyAdmin config is a connect type "TCP" not socket, which might be one reason it works and the command line doesn't, but I still don't know where I've gone wrong.
My /var/mysql/* is all owned by mysql and group www.
I'm finding lots of people asking about the ERROR 2002, but not finding any solutions (particularly for Tiger Server). I'd prefer to use the preinstalled MySQL to installing a new installation (the thread referenced above says upgrading or removing the MySQL installation is too hard to do) and there has GOT to be a reasonable explanation for why it works with phpMyAdmin, but not the command line.
Thanks in advance for any replies!
Many Mac OS X (10.4.3)

You know what? I think when I started mysql_safe, I did it with sudo. Maybe that is my problem?
If so, what user do I want to start it as? I've seen one suggestion of doing this:
./bin/mysqld_safe --user=mysql &

Why does the counter work in MAX, but not Labview?

Please help, I have been away from Labview for over 3 months, and I am quite rusty....
Last year, I successfully configured NI9401 to measure period (seconds) by counting the rising edges of my sensor signal. Since then, I have aquired a new PC, and loaded all my software into it, including the Labview VI's that successfully worked on the old computer.
I can see the digital signal using MAX and the test panel for the NI9401, so, I know my wiring and my TTL signal is OK, but, when I try to run the attached VI, nothing happens except the error below.. How do I tell this VI to look for the signal on MOD3/CTR0 and channel 14?
Thanks. I am sure it is a small adjustment...this worked fine a few months ago...not sure what is wrong now.
Thanks,
Dave
Solved!
Go to Solution.
Attachments:
continuously measure period buffered_singlechannel_forum_feb_23_2012.vi ‏20 KB

OK, now. Resolved the issue. The vi is fine, but, some shaky wires were identified...worked in MAX but not in the vi. Now that the connections have been tightened up, it works for both. Sorry for the inconvenience.
Dave

Medical app from Intuit works in IE, but not Firefox.

Encrypted medical app works in new IE, but not Firefox. Everything works down to the end, and click on "continue" and nothing happens. A tech and I have spent hours on this. Did not work on FF5 or 6. Did not work on old IE, but did on fresh new version with no data files copied in.

If it works in IE but not FF, then it has nothing to do with the mp3s. More likely it's because of the HTML on the page.
To start, page is missing DOCTYPE declaration... a MAJOR problem. The DOCTYPE declares which set of rules the browser will use to display the page. Without it, different browsers go crazy or do not work at all.
http://www.w3schools.com/tags/tag_DOCTYPE.asp
Validate the html code here:
http://validator.w3.org/
You will have to fix all the errors if you want this to work in all browsers.
Best wishes,
Adninjastrator

Sockets work on localhost but not remotely?

hi there,
I have created a simple multithreaded client / server program.
The Server listens on port 2222 for clients. When a client connects - the client sends its ip address to the server and then disconects. More than 1 client can connect at the same time to the server and the server also listens continuasly. I have 2 problems with the program...
a) the programs work on localhost but not on remote machines? (Well not over my LAN anyway).
b) I am getting 2 lots of 'datain' when the server recieves an ip address from the client when the client should only send it once.
The code is below - any help would be greatly appreciated.
//TCPServer.java
import java.io.*;
import java.net.*;
class TCPServer {
     public static void main (String args[]) throws IOException {
          ServerSocket serverSocket = null;
          boolean listening = true;
          try {
               serverSocket = new ServerSocket(2222);
          } catch (IOException e) {
               System.err.println("Could not listen on port: 2222");
               System.exit(-1);
          System.out.println("Server Started...\n");
          while (listening)
          new TCPServerThread(serverSocket.accept()).start();
          serverSocket.close();
//TCPServerThread.java
import java.net.*;
import java.io.*;
public class TCPServerThread extends Thread {
    public Socket socket;
    public TCPServerThread(Socket socket) {
     super("TCPServerThread");
     this.socket = socket;
    public void run() {
               try {
               BufferedReader datain = new BufferedReader (new InputStreamReader
                    (socket.getInputStream()));
                    System.out.println("ip address recieved");
                    System.out.println (datain.readLine () + "\n");
               } catch (IOException e) {
                    System.err.println("Cannot read in ip address\n");
                    e.printStackTrace(); // show the error
                    System.exit(-1);
     } //TCPClient.java
import java.io.*;
import java.net.*;
class TCPClient {
     public static void main (String args[]) throws Exception
          String hostname;
          int portNumber;
          String portString;
          BufferedReader inFromUser =
               new BufferedReader (new InputStreamReader(System.in));
               System.out.println("What host would you like to connect to?");
               hostname = inFromUser.readLine();
               System.out.println("What port would you like to connect to?");
               portString = inFromUser.readLine();
               portNumber = Integer.parseInt(portString);
               System.out.println("Connecting to port " + portNumber + " of " + hostname + "....\n");
                    Socket clientSocket = new Socket(hostname, portNumber);
                    Socket sock = new Socket (InetAddress.getLocalHost(), portNumber);
                    BufferedWriter dataout;
                    java.net.InetAddress i = java.net.InetAddress.getLocalHost();
                    System.out.println("Sending ip address...\n" + i.getHostAddress());
                         dataout = new BufferedWriter (new OutputStreamWriter (sock.getOutputStream()));
                              dataout.write (i.getHostAddress());
                              dataout.flush();
                              sock.close();
                                   clientSocket.close();
                         }Oh, yeah - check out my site below, I am trying to write an audio streaming client / server in Java if anyone is interested in getting involved or just being nosey....
http://www.projectg.dsl.pipex.com

In your client you are creating two sockets (why?). One connected to localhost, the other connected to the host specified using readLine.
If your client runs on the same machine you have started your server, you have two connects to your server instead of one.
The ip adresse is sent using the socket connected to localhost. That is why it does not work on remote machines.
Hope this helps.
Jörg

Mac mini webcam works on facetime but not oovoo

I am using a Rocketfish hd webcam and it is working on facetime but not on oovoo. Can someone provide a solution?

P.S.
If the third-party support info and help does not get it working for you, you can also use OS X Mavericks recovery or reinstall to repair your startup disk or reinstall OS X 10.9.
Also Apple's http://support.apple.com/kb/HT2090
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
Message was edited by: EZ Jim
Mac OSX 10.8.5

Specific extractor works in DEV but not in QUAL

Hello Everybody
I have new problem : I created a specific extractor ZCRM_SRV_PROCESS_I based on specific FM based on RSAX_BIW_GET_DATA_SIMPLE.
This extractor have to retrieve specific fields of Service Order Item (linked document type BUS2000116)
In DEV it works fine for loading INIT & DELTA
In QUAL, loading INIT does not work but loading works for some records...
Loading finish with following message :
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Job is cancelled in source system with small text :
19.04.2011 14:51:05 Job started
19.04.2011 14:51:05 Step 001 started (program SBIE0001, variant &0000000022545, user ID ALEREMOTE)
19.04.2011 14:51:05 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
Do you know why it works in DEV but not in QUAL ?
Thank you
Cyril
Edited by: cyril meslin on Apr 20, 2011 9:53 AM

There is no problem of authorization. In RSA3 it's ok for some records but too long for full of records.
In fact, my FM make a first select after to be determined init or delta mode :
IF i_updmode = 'D'.
        SELECT i~guid h~object_id h~guid h~process_type
                 INTO TABLE st_zcrmt_bw_i
                 FROM crmd_orderadm_h AS h
                 INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
                 WHERE h~object_id    IN lr_object_id
                   AND h~changed_at   >= lv_timestp
                   AND i~guid         IN lr_item_guid
                   AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
                   AND ( h~process_type = 'ZSOL'
                      OR h~process_type = 'ZSPE'
                      OR h~process_type = 'ZSVO'
                      OR h~process_type = 'ZSVT' ).
      ELSE.
        SELECT i~guid h~object_id h~guid h~process_type
                 INTO TABLE st_zcrmt_bw_i         "PACKAGE SIZE I_MAXSIZE
                 FROM crmd_orderadm_h AS h
                 INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
*                 UP TO I_MAXSIZE ROWS
                 WHERE h~object_id    IN lr_object_id
                   AND i~guid         IN lr_item_guid
                   AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
                   AND ( h~process_type = 'ZSOL'
                      OR h~process_type = 'ZSPE'
                      OR h~process_type = 'ZSVO'
                      OR h~process_type = 'ZSVT' ).
      ENDIF.
Then FM CRM_ORDER_READ is running for 500 records to retrieve header data :
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      iv_no_auth_check     = abap_true
      it_header_guid       = it_guids      "500 records
      it_requested_objects = lt_requested_objects
    IMPORTING
      et_orderadm_h        = lt_orderadm_h
      et_service_os        = lt_service_os.
Then this FM is running for 10 records for item data (max 10 because FM CRM_ORDER_READ does not work for more records) :
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      iv_only_spec_items   = abap_true
      it_item_guid         = it_guids         "10 records
      it_requested_objects = lt_requested_objects
    IMPORTING
      et_orderadm_i        = lt_orderadm_i
      et_sales             = lt_sales
      et_appointment       = lt_appointment
      et_status            = lt_status
      et_text              = lt_text
      et_subject           = lt_subject
      et_doc_flow          = lt_doc_flow
      et_customer_i        = lt_customer_i
Perhaps if I succeeded to improve SELECT & call of CRM_ORDER_READ, it would be better but I don't know how to do...

Applets work in NS but not in IE

Hello,
I would very much appreciate tips on setting up sun java so that I can make applets that work in IE.
Now, my IE have no problems with applets found on the web, for example this one is ok:
http://java.sun.com/applets/jdk/1.1/demo/Animator/example1.html
But, the examples installed with j2sdk1.4.1_07 will only work in Netscape. In IE these applets just display a grey applet area. (IE6/XP and IE5.5/Win98)
So far:
Have read installations instruction and ReadMe files. Installed j2sdk1.4.1_07, added PATH, code compiles fine. Console programs work ok. I also compiled a Hello World applet, which also worked in NS, but not in IE.
Any help greatly appreciated.

Me again...
Right... Maybe I am answering my own question here? It seems that the programs compiled with j2sdk1.4.1_07 will NOT run under the JVM 1.1.4 from Microsoft Corp?
So, anything that I compile with the later sun package will most likely fail on IE browsers unless the user have upgraded their JVMs?
If so, then what version of Sun Java can be recommended to achieve reasonable amount of compatibility with the IE5.5 and IE6 that are out there?

Java calendar works in IE but not in Firefox

This Java code works in IE but not in Firefox - any ideas - tks
<pre><nowiki><TABLE bgColor=#ffffff border=1 cellPadding=0 cellSpacing=3 id=calendar style="DISPLAY: none; POSITION: absolute; Z-INDEX: 4; left: 28px; top: 365px">
<TBODY>
<TR>
<TD colSpan=7 vAlign=center> 
<SELECT id=month onchange=newCalendar()>
<SCRIPT language=JavaScript>
// Output months into the document.
// Select current month.
for (var intLoop = 0; intLoop < months.length; intLoop++)
document.write("<OPTION " + (today.month == intLoop ? "Selected" : "") + ">" + months[intLoop]);
</SCRIPT>
</SELECT>

<SELECT id=year onchange=newCalendar()>
<SCRIPT language=JavaScript>
// Output years into the document.
// Select current year.
for (var intLoop = 1900; intLoop < 2028; intLoop++)
document.write("<OPTION " + (today.year == intLoop ? "Selected" : "") + ">" + intLoop);
</SCRIPT>
</SELECT>
</TD>
</TR>
<TR class=days> 
<SCRIPT language=JavaScript>
// Output days.
for (var intLoop = 0; intLoop < days.length; intLoop++)
document.write("<TD>" + days[intLoop] + "</TD>");
</SCRIPT>
</TR>
<TBODY class=dates id=dayList onclick="getDate('')" vAlign=center> 
<SCRIPT language=JavaScript>
for (var intWeeks = 0; intWeeks < 6; intWeeks++)
document.write("<TR>");
for (var intDays = 0; intDays < days.length; intDays++)
document.write("<TD></TD>");
document.write("</TR>");
</SCRIPT>
</TBODY> <TBODY>
<TR>
<TD class=today colSpan=5 id=todayday onclick=getTodayDay()></TD>
<TD align=right colSpan=2><A href="javascript:HideCalendar();"><SPAN style="COLOR: black; FONT-SIZE: 10px"><B>Hide</B></SPAN></A></TD>
</TR>
</TBODY>
</TABLE></nowiki></pre>

Document.all doesn't work in Firefox, you need to use document.getElementById().<br />
See https://developer.mozilla.org/En/DOM/document.getElementById
<pre><nowiki> var parseYear = parseInt(document.all.year [document.all.year.selectedIndex].text);
var newCal = new Date(parseYear , document.all.month.selectedIndex, 1);
</nowiki></pre>

Slide show works on PCs but not on Macs

A parent at the school where I teach has just created a
website for us. She used Dreamweaver and photoshop to create it.
There are some pages where there should be a looping slide show
(that runs on its own). These slide shows work on PCs but not on
Macs (it just stays on one photo on Macs). For the slide show she
"just added a timeline to the jpg image, changing the imagesource
every 60 frames, that you can do in dreamweaver." Is there some way
to fix this so it works on both?
Here's the school's website: www.smash.smmusd.org

Unfortunately, the timeline function may not be the best way
to do this.
Notwithstanding Joe's comments about 508 compliance, there
have been issues
reported in the past regarding the use of timelines on Macs.
It may be
better to seek some 'banner rotation' scripts using Google,
and replace the
timelines with that script. Your volunteer may or may not
know how to do
that....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Joe Makowiec" <[email protected]> wrote in
message
news:[email protected]..
> On 16 Jun 2007 in macromedia.dreamweaver, Mana Hale
wrote:
>
>> A parent at the school where I teach has just
created a website for
>> us. She used Dreamweaver and photoshop to create it.
There are some
>> pages where there should be a looping slide show
(that runs on its
>> own). These slide shows work on PCs but not on Macs
(it just stays
>> on one photo on Macs). For the slide show she "just
added a timeline
>> to the jpg image, changing the imagesource every 60
frames, that you
>> can do in dreamweaver." Is there some way to fix
this so it works on
>> both?
>>
>> Here's the school's website: www.smash.smmusd.org
>
> I'd worry about accessibility/Section 508 issues before
I worried
> about slideshows. That page is all images.
>
>
http://www.contentquality.com/mynewtester/cynthia.exe?rptmode=-1&url1=http%3A%2F%2Fwww.sma sh.smmusd.org%2F
>
http://www.contentquality.com/mynewtester/cynthia.exe?rptmode=2&url1=http%3A%2F%2Fwww.smas h.smmusd.org%2F
>
> --
> Joe Makowiec
>
http://makowiec.net/
> Email:
http://makowiec.net/contact.php

New archlinux installation working on native but not on VMWare.

Similar Messages

Maybe you are looking for