New Article - RoboHelp projects with Subversion and TortoiseSVN

Some folks have posted questions about Subversion and TortoiseSVN in this forum, so I thought I'd pass along this new article I found in the Adobe Developer Network this week that goes in to detail on how to set up this open-source solution with RoboHelp:
http://www.adobe.com/devnet/robohelp/articles/robohelp_subversion.html
Thanks
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Thread moved to Source Control forum.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

  • Quality Center 11 (ALM) Query - Integration with Subversion and Jenkins

    Hi OHPCPaT Forum,
    Are there any restrictions to enabling the QC integration with Subversion and Jenkins when the QC server is a SaaS cloud instance? Is there any additional config I should be aware of?
    Thanks in anticipation

    Hi,
    Yes all the users are facing the issue. Please find more details for the issue.
    Currently we are upgrading Quality Center 10.0 to 11.0 with HP Enterprise Integration module for SAP applications. The project successfully upgraded from QC 10.0 to 11.0 but there are some error popup for the project for which Application Module and Enterprise Integration for SAP applications Version 2.6 was enabled
    Quality Center Details:
    HP Application Lifecycle Management 11.00
    ALM patch level: 07
    Quality Center 11.00 Enterprise Edition
    Component     Build
    OTA Client     11.0.0.6051
    User Interface     11.0.0.6051
    WebGate Client     11.0.0.6051
    Test Run Scheduler     11.0.0.6051
    Execution Flow     11.0.0.6051
    Site Administration Client     11.0.0.6051
    Extension Version     
    Enterprise Integration for SAP applications     2.6.0.3232
    Sprinter     11.0.0.6051
    Application Model     2.6.0.917
    Installation Steps followed:-
    1.Installed HP ALM
    2.Installed Patch Service Pack 2 (Patch 2,3,4)
    3.Installed Patch 6
    4.Installed Patch 7
    5.Installed the Extensions HP Enterprise Integration module for SAP applications using Extension Deployment Tool by following the steps provided in the Addin Page
    6.Created new project in HP ALM
    7.Login to the project (no issue)
    8.Enabled the Project Extensions
    9.Login to the project (able to access the project but error message is popup when we access Test plan and Defect module)
    Note: There is no error when we access the project for which the HP Enterprise Integration module for SAP applications EI not enabled. QC 11.0 is not integrated with any tools.
    Let me know is there any step we missed or we need to do any manual steps we need to do before enabling EI

  • How is the best way to export my project with clips and videos?

    I would like to save my project and export the project with clips and videos included. What is the best way to do it?

    Can you clarify:
    clips and video
    Seems as though you want to retain the original media?
    Export as a Master File to get a good quality export file of your Timeline.
    Al

  • New Tax Code Creation with CST and Service Tax

    Hi
    I want to know the complete procedure of new tax code creation with CST and Service Tax. I want to know the steps for calculation of % of that Tax Code.
    Kindly help me out.
    Thanks
    Kshipra G

    Hi Expert,
    Before creating a Tax Code, Create two Condition Types(T-Code: OBYZ) for CST and Service Tax, which need to Select the below Items
    Cond. class -  D - Taxes
    Calculat.type -  A - Percentage
    Cond.category - D - Tax
    and while creating a Tax Procedure just select the Condition Type of CST and Service Tax and provide the Account Key for both Condition Types.
    Assign the GL Accounts to the Account Keys in T-Code: OB40.
    Create a Tax Code in T-Code: FTXP, which is to be assigned in T-Code: FV11.
    Maintain the percentage in T-Code: FV11, with your Key Combination and
    Try this procedure, which will help you...
    Regards,
    GK
    SAP

  • I have a new Mac Book Pro with Retina, and Keynote crash almoset every time i use it?

    I have a new Mac Book Pro with Retina, and Keynote crashes almoset every time i use it? I have the newest update.
    Could you please help me? I have a lot of Keynote shows, and I have to use it now!!
    I have saved a crash report, if you need it.

    Apple will not write back to you. Telephone using the Apple Care phone number appropriate for your country and ask for a refund, if that is what you want to do.
    I use Keynote everday, it does exactly what it says it will do,  that is if your NOT using Mountain LIon.
    There are many applications available
    I have used MS PowerPoint professionally for many years on both Windows and Mac, I can assure you it can do everything that Keynote can do and very much more.
    Which software you choose depends on who you are and who you are presenting to.
    for interactive presentations look at:
    PowerPoint
    Adobe Flash
    Adobe Director
    Camtasia
    Dreamweaver (an HTML application)
    for simple photo slide shows:
    iPhoto
    iMovie
    Picasa
    Photomagico
    Adobe Lightroom

  • When Apple solve problems with new iTunes calendar sync with windows and outlook?

    When Apple solve problems with new iTunes calendar sync with windows and outlook?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    More Info here...
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Are any new AEBSn working reliably with internet and HD?

    Are any new AEBSn working reliably with internet and HD?
    Just wondering. Thinking of getting one.
    Thanks ... Ken

    Perfect from day 1. Easy to set up but I made sure to glance through the DesigningAirPortExtreme802.11nNetworks.pdf that is available online so I had an idea of what to expect before I got started.
    I don't have a hard drive hooked up but I did hook up a 512 MB Flash thumb drive to see how it would work. To the base station it is just another drive so it's the same thing as hooking up a regular hard drive. I tested it both formatted as an HFS drive and a FAT drive to see the difference in how it presented the drive.
    I also tested the network connectivity in Windows XP using Bootcamp. I tried it both with the default drivers that get installed as part of Bootcamp and with the drivers from the D-Link DWA-645 which uses the same Atheros AR5008 chip set as my MacBook Pro.

  • Import FrameMaker info new RoboHelp project with extendscript

    Hi,
    I have done the following in robohelp 11 from Adobe Technical Communication Suite 5
    1) select file|new|project
    2) select import tab
    3) Select the FrameMaker Documents option icon
    This works quit well. I get a new RoboHelp project.
    I would like to do the same via a RoboHelp extendScript but I can't get it to work.
    Does anyone have some hints or good exampels to be inspired from?
    Thanks
    Alex

    It does depend on how fancy you want to make it. Creating a GUI with
    file picker is quite a bit of work.
    But if you only want a script to create a new project and import an FM
    book, that's not too hard. For example:
    RoboHelp.newProject('', 'MyProject', 'C:\temp\rh\scriptproject',
    'MyProjectTitle',);
    RoboHelp.project.importFrameMakerDoc('D:\FM\FMBook.bk','FMFolderinRH','D:\FM\FMBookTOC.fm' ,'RHTOCName',true,'RHIndexName','RHGlossary');
    (Untested)
    Run RH via command line with the script name as parameter: robohtml.exe
    -x script.jsx
    There is not much information on ExtendScript in RoboHelp. You can find
    two introductory articles in the RoboHelp Developer Center to get you
    started: http://www.adobe.com/devnet/robohelp.html
    If you want to do something more advanced, I have a free RH library for
    extendscript to make working with scripts easier. It includes functions
    as reading/writing files, setting context sensitivity, saving settings
    and more. See
    http://www.wvanweelden.eu/product/robohelp-extendscript-library
    Kind regards,
    Willam

  • Idvd project with video and slideshow for dvd-rom file access

    working on an idvd project with both a video section and photos in a few photo galleries. its' a slightly more complex project, but still only 2gb on a 4gb disc. After we burn (with all dvd-rom contents checked, and advance>edit dvd-rom contents shows photo files all there) the finished disc doesn't have files available in the dvd-romcontents! its' driving us mad as simpler projects are burning properly, with both photo and video files available. Could there be some kind of conflict occurring? does anyone have any ideas?!
    17" Desktop G5   Mac OS X (10.4.2)  

    Steve,
    It sounds like Windows Movie Maker Live was used. The regular WMM will Export to DV-AVI Type I, which will Import into PrPro much better.
    I would recommend converting the WMA/WMV to DV-AVI, and Importing that into a DV NTSC (if you are in NTSC-land) Project.
    Then, you would use Encore to do the DVD authoring. There are several ways to get the material on your Sequence into Encore. ADL (Adobe Dynamic Link) is probably the easiest way to do this.
    What is your exact workflow from PrPro, into Encore?
    What brand of blank media are you burning the DVD to?
    This ARTICLE will give you some tips.
    Good luck, and let us know a bit more,
    Hunt
    PS - Multiplexing is the function of combining the Audio and the Video into one file. There are usually two choices, "None" and then often "DVD." For None, you will get two separate files - one for the Audio and one for the Video. With "DVD" you should get a muxed (combined) file. Actually, the separate Audio and Video is the preferred way, if one is doing an Export from PrPro, and then an Import to Encore. One would Import the Video into Encore as a Timeline, and the Audio as an Asset. In Encore, just drag the Audio file from the Project Panel to the appropriate Timeline, where it will snap into place.

  • Trouble With HomeSite+ and TortoiseSVN

    Info: I am a ColdFusion developer using HomeSite+ for coding,
    and TortoiseSVN for source control.
    Problem: Any files (local and network - .cfm or .htm, or
    other) that are not part of the repository can only be opened by
    going to File > Open in Homesite. If I double-click a file from
    Windows Explorer, Homesite's Taskbar button starts blinking, as if
    the file opened in Homesite, but when I click Homesite to restore
    it, the file has not been opened.
    This may be a small thing, but it's very annoying and
    interrupts my workflow. Has anyone else experienced this? Is this s
    HomeSite thing, a Tortoise thing, or something else?
    Any help is appreciated.
    Thanks,
    -Rob

    Rob, I wonder if your problem is the same as that in another
    thread in this forum this week, which I just responded to (
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=92&threadid=1326871).
    Please do check that out and let us know if it helps.
    I mean, you're saying that this happens with cfm files "that
    are not part of the repository". That's not quite the same problem
    as in the other thread, which is instead about file extensions that
    HS does NOT recognize (and how to fix that).
    If that does not solve your problem, can you clarify: do you
    really mean that .cfm files in the repository don't open in HS?
    I've not experienced that (and have just confirmed it works with a
    Tortoise-based repository I have).

  • Can I Wipe a new machine that came with Leopard and install Tiger

    I like Leopard at home but at work on our network Leopard does not play well. I have a dual 3.2 Quad Core. Can I do a format and start with a fresh install of Tiger?

    My question was answered. I can not wipe my machine clean and go back to Tiger until my IT department decides to embrace the fact that the graphics departments within our company use MAC's and always will. All was well with Tiger and our network or at least we had worked through all of the issues we had and then me and the guy I work with got new machines with Leopard on them. We have one guy in IT that claims to be the go to MAC guy but sometimes I wonder, seems my partner and I know more about MAC's than the IT department but our suggestions when we give them do not seem to be welcome. Thanks for the answers.

  • Help! New to Mac - compatability with DVI and JVC HDTV

    Hope someone can help. I'm new to mac and have just bought a mac mini and a JVC LT32DS HDTV to use as a media centre. I've scanned through the hundreds of postings on the DVI problem with the mac and would like an idiots guide (literally!)as how to set the mini to work with the JVC TV.
    Following the advice I've got the two working witha VGA connection but once I use the DVI/HDMI (profigold)cable the screen is not stable and keeps flashing in and out view. I've tried various resolution settings but get no stability. I've read about Switch Res X but don't really know if this is the right way to go.

    I went to "Mediamarkt" and tried two Philips HDTVs
    1) 26PF5320
    2) 26PF9320
    TV 1) had no problem accepting the DVI signal from the mini at all the native resolutions I tried (no extra software). TV 2) -- originally my favoured one -- had a barely noticeable overscan on the menubar.
    So I bought the 26PF5320: a bit cheaper but also higher native resolution.
    So it pays to compare even similar models. Retailers will understand the situation. However, it's important to go on a slow day -- not on Saturday -- and maybe hurry up before Christmas. Understandably they don't want to spend too much time on demonstrations when the store is full of potential customers.
    The young man from the store was very impressed with the mini. Less impressed with Quicktime and that you have to pay to get a full-screen video. But that's another story.
    I was able to carry the TV and the mini (the latter in a backpack) from the store to the tram and then from the tram stop to home. Just two year ago this would have been science-fiction.
    I will try to collect more data on HDTV/mini matches and mismatches and maybe put it in an ASCII table for a start.
    iMac G4, Dual G4, mini, Xserves G5    

  • Saving projects with Transitions and Titles - iMovie 3

    Every time I edit a movie in iMovie 3, add transitions and titles, and then save, the next time I open the project, I get a window saying there are x number of stray clips (my transition and title clips) and would I like to move them to the clip panes or leave them alone. Either way, they end up being out of order. Why will they not stay in the edited order that I put them in, even after I hit Save?

    I do Save the projects this way and all the clips show up in the edit panel below the clip frames. BUT, none of the Transition or Title clips stay in the edit panel below. Each time I open the saved project, a message window appears saying that there are x number of stray clips (the Transition and Title Clips). Then it asks me if I would like to leave them alone or put them in the clips pane. If I put them in the clips pane, then I have to once again reposition them where they belong in the edit panel below. This happens every time.

  • I bought a new 13 macbook pro with 4gb and would like to get aperture 3.4.3.  Will it require too much ram for my computer?  Thanks

    I just bought a macbook pro 13" with 4gb and would like to get aperture on it.  Will aperture require too much ram for my computer?  Thanks for any support.

    I just bought a macbook pro 13" with 4gb
    I have been using Aperture on such a system, and it was o.k. with Snowleopard and moderately sized images. After I upgraded to Lion and started to user larger image files - 30 MB tiffs, I saw the occasional beachball spinning. You should be prepared to quit other applications that will hog the RAM (like Safari), when working with Aperture on Lion or Mt. Lion with only 4 GB. If you can, follow Frank Caggiano's recommendation and upgrade to 8GB. It will make a large difference.
    Regards
    Léonie

  • Compile Project with Maven and Crystal Reports dependencies

    Hi.
    I'd like to build a java project with maven. That project uses Crystal Reports.  I have added all Crystal Reports jar files in the folder lib (from the runtime download) to my maven dependencies. But i get always the following error message.
    The import com.crystaldecisions.ReportViewer cannot be resolved
    in that package is the ReportViewerBean.class an so i get also the following message.
    ReportViewerBean cannot be resolved
    I tried several different ways with no success.
    im looking foreward for your advice.
    thanks.
    Edited by: hansmeier_de on Aug 25, 2010 11:20 AM

    did you list them in the dependencies in your pom file?

Maybe you are looking for