New AS Linux installation conflicts with outher middle tiers in production
I have a customer who installed AS 10g on Red Hat 3.0 with one house for infrastructure and another for middle tier. It is going out and discovering other middle tiers they have in production on Windows. It is causing port conflicts. OC4J and Forms keep stopping and restarting.
Any suggestions?
Thanks, Andy
I have a customer who installed AS 10g on Red Hat 3.0 with one house for infrastructure and another for middle tier. It is going out and discovering other middle tiers they have in production on Windows. It is causing port conflicts. OC4J and Forms keep stopping and restarting.
Any suggestions?
Thanks, Andy
Similar Messages
-
[solved]util-linux-ng conflicts with e2fsprogs
i encount this error msg when i am installing apache server in my archlinux,at first i think that is a apache dependencies problem,but later,when i install other program pacman shows the same error msg.so i remove the e2fsprogs,but more programs need e2fsprogs.
what should i do then?
Last edited by yisohoo (2009-09-26 04:58:17)I had the same problem at install hal, ( pacman -S extra/hal )
CONFLICT util-linux-ng conflicts with e2fsprogs .. remove y/n ? -->> fail by dependences...
pacman -Syu --->>> SOLVED !!
Thx. -
Cannot install xorg Get error about a conflict with e2fsprogs?
IIRC, I got this error message:
:: util-linux-ng conflicts with e2fsprogs. Remove e2fsprogs? [Y/n] y
error: failed to prepare transaction (could not satisfy dependencies)
And this message, too:
cryptsetup: requires e2fsprogs
I'm stuck.
Looks like I'm gonna reformat again!
Last edited by RJARRRPCGP (2010-02-09 00:05:24)wonder wrote:
RJARRRPCGP wrote:
IIRC, I got this error message:
:: util-linux-ng conflicts with e2fsprogs. Remove e2fsprogs? [Y/n] y
error: failed to prepare transaction (could not satisfy dependencies)
Looks like I'm gonna reformat again!
not really, just do pacman -Syu
Fixed it, for some reason, pacman didn't do a full update. Was wondering why I didn't see much being updated.
Syu did the trick. -
[solved] Slim themes conflict with e2fsprogs
I tried installing a couple of slim themes, and got a message saying...
util-Linux-ng conflicts with e2fsprogs. Remove e2fsprogs?
I am currently on my desktop trying to install arch on a old laptop.
Last edited by Jboxer (2010-02-08 01:24:46)I have discovered e2fsprogs has to deal with Ext2 Filesystem Utilities, i have installed Ext4, therefore I might try to remove the programs that are dependent of e2fsprogs. I would like to receive some more suggestions before I do anything.
Edit: It also is used for Ext4, so scratch that idea.
Last edited by Jboxer (2010-02-07 22:43:20) -
SAP R/3 4.7 EXt200 installation on RedHat Linux 5.2 with Oracle 10G
Hi,
I got this error during Database Instance Installation:
All file system node operations of table tORA_SapdataNodes processed successfully.
ERROR 2009-08-31 11:04:39 [iaxxinscbk.cpp:289]
abortInstallation
MDB-06020 File not found: [no oracle rdbms file found].
I am done with CI Installation.
Any help would be appreciated.Hi ,
First of all please check availability of your OS + DB requiremnts whether it is supported by SAP or not.You can check this at Product Availability Matrix at ::
http://service.sap.com/pam
If this support for your environment i.e.RedHat Linux 5.2 with Oracle 10G then be informed that after starting sapinst in step create database it will prompt you for installing your oracle DB. So open a new window & install your databse ,do the patching of your DB & then continue with sapinst after successfull installation of oracle.Rest of details sapinst will prompot you during instal;lation.
Hope this will guide you for your query.
Thanks..
Mohit -
New Oracle Linux 6 installation - ASMLib and EMC Powerpath - is it possible
Hi everyone,
I would like to ask whether that latest version of Oracle Linux 6 can be used for a new installation (one that will replace Windows) to serve as that basis for Oracle RAC.
The storage is a high-end EMC Clariion.
I want to use the Unbreakable Enterprise Linux 2.
I would like to use EMC Powerpath, but it seems this is not yet available (or at list not present in the current EMC support matrix).
I want to use ASMLib, but if have to use redhat compatible kernel (so that I can use Powerpath), I will not be able to use ASMLib (AFAIK).
Does anybody has experience with this problem? What would you recommend?
I'm putting a list of possile options that I am aware of:
1. Use OEL5 with redhat compatible kernel (use Powerpath and ASMLib).
2. Use OEL6 with UEK2 kernel, but don't use Powerpath (use dm-multipath and ASMLib)
3. Use OEL6 with redhat compatible kernel (use Powerpath and don't use ASMLib, but use udev for persistent device permissions and naming)
4. Use SLES11 (with Powerpath and ASMLib)
do you have other suggestions? do you have comments on the pros and cons on this options.
Can someone from EMC or Oracle comment on the plans to make Powerpath available for OL6 with UEK2 ?
Regards,
MihailI could test "OEL6 with RHEL kernel + Powerpath" vs "OEL6 with UEK2 kernel + dm-mpio", but anyway this would not give the answer whether Powerpath is faster or slower than dm-mpio by itself, since the kernels would be different.I wonder how the answer whether EMC Powerpath or DM Multipath is faster can help you? Apparently you cannot use Powerpath with the UEK2 kernel and have a certified system at the same time, at least not at this time. However there is no reason to throw the towel yet. If the use of Powerpath instead of Multipath is so critical, why not using Oracle Linux 5.7, which is certified? If you check the EMC compatibility matrix (esm_by_os), it actually shows some systems including Clariion supported for Oracle Linux 6.2 with UEK kernel. You might want to take a closer look.
Anyway, it doesn't look like you will be able to solve the performance question without doing a real world test in your environment. You have no indication that Oracle Linux 6.3 with DM Mutlipath will give you less performance than RHEL 6.3 with Powerpath. Regarding the information you found, Linux is not Windows.
Powerpath is not free and you have to pay a license, but worse, it will tie your system to a very specific version of the kernel. In case of RHEL 6 or later, it will deny you the use of Oracle specific products and features such as ASMLib, etc. Multipath seems to be the more economic and better solution since you do not have to worry about kernel versions and have the freedom to use whatever Oracle Linux has to offer.
So, do you want to limit your kernel features and options and fix a problem that you don't know even know if it applies and pay money for it?
Edited by: Dude on Aug 21, 2012 5:57 PM -
Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system
We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115 -
Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!! -
I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks
If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).
-
I'm trying to install Oracle 8.1.7 on Suse Linux 7.0 (with glibc 2.1.3).
However, while runnning universal installer, I get the following error messages:
"Error in writing to file /opt/oracle/product/8.1.7/javavm/admin/libjox8oracle_jpub_c.so"
and (later):
"I/O error in file /opt/oracle/product/8.1.7/jis/install/ncomp_so_full_orb.jar"
When trying to link the Oracle components, the installer produces:
"Error in invoking target utilities of makefile /opt/oracle/product/8.1.7/rdbms/lib/ins_rdbms.mk"
After installation is finished, some Oracle utilities can't be started.
E.g., svrmgrl fails and I can't create a database instance.
What's going wrong here? I tried to reinstall Oracle several times, but this
behaviour is reproducible. Yes, I unset LANG, and set all necessary environment
variables. Any ideas would be really helpful!
nullHi:
I am experiencing the same problem. I followed the installation instructions to the dot, but found that the universal installer (UI) (java based) fails at the very beginning.
I'm still trying to install. However, as per the installation instructions, I didn't install Java. So the UI is only running on the runtime version that comes with the CD.
If I make any progress these days, I will post the solution...
Raul Rodriguez -
Has anyone had trouble with the middle mouse (open in new tab) button lately?
Hi gang. Since v29 came out, I have been having trouble with the middle mouse (open in new tab) button.
Sometimes the button does not register with Firefox. And sometimes FF acts like I pressed it several times.
Has anyone else had any problems? I use an add-on called
'''''[https://addons.mozilla.org/en-US/firefox/addon/mclickfocustab/?src=collection&collection_id=33bf10fa-666d-45a2-9bc9-491ce21671c6 MClickFocusTab]'''''
I disabled it but the problem was still there.''''' "Sometimes the button does not register with Firefox. And sometimes FF acts like I pressed it several times." '''''
Sounds like a mouse on its' way to mouse-heaven. Seriously, the exact symptoms I have seen with a dozen 3 button mouse's (?meese - ?mice) over the last 15 years. <br />
Not registering a click is usually due to a dirty contact. And the "double-click" is when the flat spring looses tension and bounces.
I have had similar happen with the left button, too. But when it happens to that button it is more noticeable much sooner.
I bought a box of a dozen A4D house branded infrared wireless 3-button mouse's for like $24.00 back in 2000 that were on clearance because the driver disk didn't support W2K, only Win95, 98, and NT4. I got newer drivers from the A4D website and wore all 12 out over the 8 or 9 years. I even fixed a few that broke from the parts from other broken mouse's. I still have 6 or 7 of them laying in the "needs to be fixed" box under my workbench. I'll probably never fix them though, the nano receiver USB mouses I have been using for the 4 or 5 years have much better battery life and lately only need one AA battery. -
Openldap conflict with DS5.2 on rh linux
I have installed DS5.2 on rh linux 7.3. But I am having some sort of conflict with the openldap 2.0.27 that is installed. Everytime I run ldapsearch I get this:
SASL/DIGEST-M5 authentication started
Please enter your password:
I cant figure out how to stop this and refer to the ldapsearch of the DS5.2. Any ideas? Do I try to uninstall openldap?You can probably turn off or turn on ldap.conf(5) properties set by default. I guess you can also set things in an .ldaprc file per user. Maybe the man page for ldap.conf will help if you want to use that route.
An alternative is to use the ldap* tools installed with Directory Server.
$ cd ServerRoot/shared/bin
$ ./ldapsearch options... -
Installation InDesignCS6 failed: conflict with imageready.exe
I tried several times to install indesignCS6 via cloud.
during installation I get message that there is a conflict with imageready.exe, which should be closed.
In taskmanager there is no such file active.
Imageready is not installed on computer.
Only file with similar name I found is an exe that belongs to a backup-tool (not activated during installation process) called shadowprotect (by storagecraft).
Any idea? Thanks for helping.The issue isn't with the processes, its actually a service running so go to your `task manager` then click `services` then at the bottom there will be a button `services` with the admin icon. Click on that and then you will be brought into a window with all the services running, look for `StorageCraft ImageReady` and stop that service. Once done you will be able to run the install as normal.
-
Beehive installation :pdksh conflicts with ksh-20060214-1.7.i386
Hi,
I am doing Beehive installation on OEL5.
I got this prerequisite failed....
*Checking for ksh-20060214-1.4; found Not found. Failed.....so the overall check is also failed+.
What I tried:
[_root@stcfmw01 u06]# cd OEL-5_32Bit/OEL-5_32Bit_Disk1_of_5/Server/
[root@stcfmw01 Server]# rpm -ivh ksh-20060214-1.7.i386.rpm
error: Failed dependencies:
pdksh conflicts with ksh-20060214-1.7.i386
[root@stcfmw01 Server]#
[root@stcfmw01 Server]#
i.e it is conflicting with pdksh
Please gimme a solution....
Regards,
AshleeChecking recommended operating system packages
Checking for gcc-4.1.1-52; found gcc-4.1.2-42.el5. Passed
Checking for gcc-c++-4.1.1-52; found gcc-c++-4.1.2-42.el5. Passed
Checking for setarch-2.0-1.1; found setarch-2.0-1.1. Passed
Checking for ksh-20060214-1.4; found Not found. Failed
Checking for sysstat-7.0.0-3; found sysstat-7.0.2-1.el5. Passed
Checking for gdbm-1.8.0-26.2.1; found gdbm-1.8.0-26.2.1. Passed
Checking for libstdc++-4.1.1-52; found libstdc++-4.1.2-42.el5. Passed
Checking for libstdc++-devel-4.1.1-52; found libstdc++-devel-4.1.2-42.el5. Passed
Checking for compat-libstdc++-296-2.96-138; found compat-libstdc++-296-2.96-141. Passed
Checking for compat-db-4.2.52-5.1; found compat-db-4.2.52-5.1. Passed
Checking for control-center-2.16.0-14; found control-center-1:2.16.0-16.el5. Passed
Checking for glibc-common-2.5-12; found glibc-common-2.5-24. Passed
Checking for binutils-2.17.50.0.6-2; found binutils-2.17.50.0.6-6.0.1.el5. Passed
Checking for make-3.81-1.1; found make-1:3.81-3.el5. Passed
Check complete. The overall result of this check is: Failed
Problem: Some recommended packages are missing (see above).
Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the readme to find out how to get the missing packages.
============================================== -
New computer with lightroom 5.7 installed old computer has 3.6 installed.The new version has a conflict when trying to read the external harddrives.Old sees it as drive (I) but new sees it as drive(E).When I try to rename external drive it comes up as LaCie (E) (I) so I cannot get it to change the name for lightroom to read it with all the previous edits-please help all advice appreciated.
lotta stuff going on. I'm in the office now and don't expect a client for about 45 minutes. Want to walk thru this via skype or ichat? email me directly if you do. [email protected]
If not, post back and I'll try and walk thru these things.
Also, if you want to email me the project, I'll see if I can open it here.
Maybe you are looking for
-
Thumbnail not same photos when clicked on
When I click on a thumbnail a different photo comes up.some thumbnails are black also and some have different icons,anyone able to help ? thanks g4 Mac OS X (10.4.5)
-
Screens Blacks out during Remote Desktop
I have a 2008 iMac running Yosemite (up to date) with a boot camp partition with Windows 7 (fully updated). Running in Windows 7, I start Internet Explorer 11 and go to my company's remoting website and initiate a remote desktop connection. While the
-
Yosemite - Spotlight NTFS external drive indexing issue
Good morning! Yosemite's spotlight doesn't seem to find any of the files on my external NTFS hard drive. I would like to know whether there is a way or not to get it done. PS: I've added it to the privacy tab, removed it and it still not indexing. A
-
Backlight Bleed on W540 (3K IPS)
Hi all, So far, I have been very pleased with my W540 in all aspects once I got everything the way I wanted it. However, there is some backlight bleed on the screen, and I'm not sure if this is normal or I should pursue a screen replacement through t
-
Joining a dual query to another query
dear all; I am using the following syntax to get a particular user_place from a table which is joined to dual...see syntax below select distinct ch.user_place from table_one inner join dual on ch.user_place = 'TEXAS'; which give me the following resu