New ATI Catalyst 4.8
4.8 is out and it mentions a 14% increase in Doom III.....ENJOY
4.8 Catalyst
Hi running a RX 9800 pro at XT speed found the 4.8 catalysts a little unstable personally i,ve found that the 4.4 ,s are the most stable drivers i,ve used so far .... tried all the ati drivers from 4.2 - 4.8 and omega ,s 2.531 , 2.551 , 2.558 . 4.8,s may be good for doom3 but i wouldnt rush out and change over to them unless your actually playing doom3
Similar Messages
-
ATI Catalyst 8.5 Proprietary Linux Display Driver released
New ATI Catalyst™ 8.5 Proprietary Linux Display Driver was released the day before yesterday and according to release notes it has many improvements.
New Features
This release of the Catalyst™ Linux software driver introduces Mipmap Detail, Catalyst A.I., and AA Filters in the 3D ORCA page of the Catalyst™ Control Center Linux Edition.
Resolved Issues
* The following section provide a brief description of resolved issues with the latest version of the ATI Catalyst™ Linux software suite. These include:
* Support for video playback on the second head in dual head mode is now available. Further details can be found in topic number 737-26985
* Unresolved symbols in Xorg log under RHEL 4u6 32 and 64 bit no longer occur. Further details can be found in topic number 737-34284
* The desktop background color is no longer displayed incorrectly when using xcommgr. Further details can be found in topic number 737-34285
* Change VT no longer fails when kernel module is not loaded. Further details can be found in topic number 737-34286
* Switching to the virtual terminal multiple times no longer results in X displaying corruption. Further details can be found in topic number 737-34287
* Catalyst Control Center: The Preference page is now localized for all supported languages. Further details can be found in topic number 737-34275
* The Linux kernel module is no longer installed to wrong location if the Linux kernel is updated. Further details can be found in topic number 737-34288
* Random system hangs no longer occur when calls to the ATI driver are made from Ring3. Further details can be found in topic number 737-34289
* X window no longer fails to respond when GoogleEarth is maximized. Further details can be found in topic number 737-34290
* A segmentation fault no longer occurs when running SPECViewperf on systems containing an ATI FireGL V5100 series product and running SUSE 10.3 x86. Further details can be found in topic number 737-34276
* Enabling Composite extension no longer displays 8x AA for graphic cards that do not support 8x AA under the Ubuntu 7.10 operating system. Further details can be found in topic number 737-34291
* Display corruption is no longer noticed at logon when compiz is enabled. Further details can be found in topic number 737-34292
* Launching the glxgears application no longer results in segmentation faults. Further details can be found in topic number 737-34293
* GoogleEarth: Launching the application in horizontal mode on a system running X no longer results in corruption being noticed. Further details can be found in topic number 737-34293
* Specviewperf 8.1 64 bit version: Segmentation faults no longer occurs on IGP systems. Further details can be found in topic number 737-34294
* Maya 2008: Moving the render window no longer results in the operating system failing. Further details can be found in topic number 737-34295
* Glxgears corruption is no longer noticed in big desktop mode. Further details can be found in topic number 737-34296
Known Issues
* The following section provides a brief description of known issues associated with the latest version of ATI Catalyst™ Linux software suite. These issues include:
* Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-29578
* Bandwidth corruption may be noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
* SECAM, NTSC or PAL signal changes when using aticonfig or Catalyst Control Center but does not apply to the TV display output. Further details can be found in topic number 737-34297
* Running X server without a window manager may result in the X server flashing green for a moment, going black, and the computer becoming unresponsive. Further details can be found in topic number 737-34299
* Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-34298
* Connecting a CRT display device to a system containing an ATI Mobility Radeon X1600 product may result in the display device flashing multiple times or failing to display an image when attempting to launch the Catalyst Control Center. Further details can be found in topic number 737-34300
* Corruption may be noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-34301
* Quake 3 Arena (demo): Segmentation faults may occur when attempting to play the game. Further details can be found in topic number 737-34302
* Specviewperf: Launching the application may result in the Linux operating system failing to respond. Further details can be found in topic number 737-34282
* Opening a terminal and running semi-automated DPPT tests via lnxtest.sh may result in the operating system failing to respond. Further details can be found in topic number 737-34283
* A segmentation fault may occur when running SPECViewperf on systems containing an ATI FireGL V5100 series product and running SUSE 10.3 x86. Further details can be found in topic number 737-34319
* FGL_GLXGEARS or GLXGEARS: X may fail to respond when launching either of the applications. Further details can be found in topic number 737-34316
* Maya 2008: Various comparison failures may be noticed. Further details can be found in topic number 737-34277
* The X Server may fail to reset clearly when AIGLX is enabled. Further details can be found in topic number 737-34317
* DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-34278
* SPEC Viewperf 8.1: A performance drop may be noticed when running the application under Linux. Further details can be found in topic number 737-34279
* Maya2008: The hardware render buffer may fail to render/display the image. Further details can be found in topic number 737-34280
* May2008: The hardware render Perl script may display an error message when rendering. Further details can be found in topic number 737-34281
I wonder when it will appear in Arch's repositoriesYea, it would be great as at Phoronix forums some people are reporting 10% performance increase in games
EDIT: Some release notes from AMD
New Features
This release of the Catalyst™ Linux software driver introduces UYVY and YUY2 pixel format support. This support provides interleaved stream support for video playback applications such as TVTime and MythTV.
Resolved Issues
The following section provide a brief description of resolved issues with the latest version of the ATI Catalyst™ Linux software suite. These include:
*Enemy Territory: Quake Wars: Playing the demo on a system running X no longer results in corruption being noticed. Further details can be found in topic number 737-35208
*Maya 2008: An incorrect colormap is no longer displayed for texture selector on systems running X. Further details can be found in topic number 737-35207
*Quake 3 Arena (demo): Segmentation faults no longer occur when attempting to play the game. Further details can be found in topic number 737-35206
*Quake3: Corruption is no longer noticed when changing the display resolution when the game is running. Further details can be found in topic number 737-35209
*SECAM, NTSC or PAL signal changes when using aticonfig or Catalyst Control Center and now gets applied to the TV display output. Further details can be found in topic number 737-34297
*Running X server without a window manager no longer results in the X server flashing green for a moment, going black, and the computer becoming unresponsive. Further details can be found in topic number 737-34299
*Corruption is no longer noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-34301
*Clock Gating is now supported and enable under the Linux operating system. Further details can be found in topic number 737-35191
*The desktop background color is no longer displayed incorrectly when using xcommgr. Further details can be found in topic number 737-35192
*Using the wrong delimiter in aticonfig --set-dispattrib=<disp>,<attr>, <value> no longer results in a segmentation fault. Further details can be found in topic number 737-35194
*Audio out is now functioning after the installation of the ATI graphics drivers for Ubuntu 7.10. Further details can be found in topic number 737-35196
*Bandwidth corruption is no longer noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
*Playing a video clip using mplayer with the Xv extension enabled no longer results in an error indicating that Xv could not find a free Xv port. Further details can be found in topic number 737-35198
*Corruption is no longer noticed when enabling Big Desktop on systems containing an ATI FireGL X1 series of product and running X. Further details can be found in topic number 737-35199
*Running the X server generations test no longer results in the operating system failing to respond or a Kernel panic to occur after first server generation on SuSE 10.3 64 bit. Further details can be found in topic number 737-35200
*Attempting to resize a 2D application window no longer results in poor performance being noticed when composing is enabled. Further details can be found in topic number 737-35201
*Screen flicker is no longer noticed after running amdcccle in X. Further details can be found in topic number 737-35202
*Corruption is no longer noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-35203
*Glxgears corruption is no longer noticed in big desktop mode. Further details can be found in topic number 737-35204
*Starting glxgears and/or fgl_glxgears no longer results in the gears failing to render on SuSE 10.2 x86_64. Further details can be found in topic number 737-35205
*FGL_GLXGEARS or GLXGEARS: X no longer fails to respond when launching either of the applications. Further details can be found in topic number 737-35210
Known Issues
The following section provides a brief description of known issues associated with the latest version of ATI Catalyst™ Linux software suite. These issues include:
*DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-35219
*Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-29578
*Bandwidth corruption may be noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI *Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
*Connecting a CRT display device to a system containing an ATI Mobility Radeon X1600 product may result in the display device flashing multiple times or failing to display an image when attempting to launch the Catalyst Control Center. Further details can be found in topic number 737-34300
*DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-34278
*Setting the Overscan to an invalid value may result in segmentation faults. Further details can be found in topic number 737-35211
*An incorrect error message may be returned when applying an unsupported TV geometry in a console terminal. Further details can be found in topic number 737-35212
*Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-35213
*An X segmentation fault may occur when launching SUZI/textured video. Further details can be found in topic number 737-35214
*Creating two successive connections may result in direct GL context to fail. Further details can be found in topic number 737-35215
*Moving the mouse or tapping a key may fail to close an OpenGL screen-saver and bring the user back to the x desktop. Further details can be found in topic number 737-35216
*The X Server may fail to reset clearly when AIGLX is enabled. Further details can be found in topic number 737-35217
*Opening a terminal and running semiautomated DPPT tests via lnxtest.sh may result in the operating system failing to respond. Further details can be found in topic number 737-35218
Last edited by Zibi1981 (2008-06-19 15:42:23) -
ATI Catalyst 13.3 beta 2 Poisonous to Photoshop CS6
Last night I installed the new ATI Catalyst 13.3 beta 2 driver. The 13.2 betas had worked seemingly okay. But with 13.3 beta 2, Photoshop CS6 13.1.2 crashes in Advanced mode when any document is opened...
Faulting application name: Photoshop.exe, version: 13.1.2.0, time stamp: 0x50e86765
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000094
Fault offset: 0x000000000118a67f
Faulting process id: 0x186c
Faulting application start time: 0x01ce232bdf156c88
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
Faulting module path: C:\Windows\system32\atio6axx.dll
Report Id: 2676a2f8-8f1f-11e2-bb85-005056c00008
I'm still trying things, to see if there are workarounds, or modes in which it works, but for now, my advice:
Avoid installing Catalyst 13.3 beta 2.
I'll follow up here when I learn more.
-NoelOne manifestation of this new driver version is that Photoshop CS6 now thinks there is an insane amount of VRAM...
This is a problem that showed up in Catalyst 12.10 and persisted through 13.1, then was miraculously solved in 13.2 betas. Now it has returned.
And from what I've been able to see during testing, it crashes Photoshop in all GPU accelerated modes, not just Advanced.
Here's what sniffer_gpu reports:
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 000000000029A888 has video RAM(MB): 2048
Device: 000000000029A888 has video RAM(MB): 2048
Vendor string: ATI Technologies Inc.
Renderer string: AMD Radeon HD 7800 Series
Version string: 3.0.12172 Compatibility Profile Context 12.100.17.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.2 AMD-APP (1124.2)
Return code: 3
After a crash I see this:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:12, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 12
Logical processor count: 24
Processor speed: 3458 MHz
Built-in memory: 49150 MB
Free memory: 43300 MB
Memory available to Photoshop: 44751 MB
Memory used by Photoshop: 95 %
Image tile size: 1024K
Image cache levels: 2
Photoshop crashed on 3/17/2013 at 1:06:00 PM (AllocateSharedGLResources)
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2 AMD-APP (1124.2)
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 2048 MB
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 7800 Series
Display: 2
Display Bounds: top=0, left=1600, bottom=1200, right=3200
Display: 1
Display Bounds: top=0, left=0, bottom=1200, right=1600
Video Card Number: 2
Video Card: Radmin Mirror Driver V3
Driver Version: 3.1.0.0
Driver Date: 20070808000000.000000-000
Video Card Driver:
Video Mode: 1600 x 1200 x 4294967296 colors
Video Card Caption: Radmin Mirror Driver V3
Video Card Memory: 0 MB
Video Card Number: 1
Video Card: AMD Radeon HD 7800 Series
Driver Version: 12.100.17.0
Driver Date: 20130314000000.000000-000
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1600 x 1200 x 4294967296 colors
Video Card Caption: AMD Radeon HD 7800 Series
Video Card Memory: 2048 MB
A complete reset of all preferences makes no difference - Photoshop still crashes with any GPU mode.
It also crashes Photoshop CS5.
-Noel -
ATI Catalyst 12.6 Released - Early Results
I have updated my Windows 7 x64 workstation, equipped with VisionTek ATI Radeon HD 5670, to use the new ATI Catalyst 12.6 release, just out. I upgraded from their last stable release, 12.2.
http://support.amd.com/us/gpudownload/windows/Pages/radeonaiw_vista64.aspx
Early indications, with just a few hours testing, are that the GPU-enhanced features of Photoshop CS6 x64 appear to work OK with this ATI driver version:
I've been able to enable use of the Graphics Processor in Advanced mode, as with 12.2.
I've been able to enable OpenCL and it appears to stay enabled.
Liquify works well and it appears fast.
Oil Paint works well and fast, though there's a slight flicker when panning the image.
The new blurs (e.g., Iris Blur) work well and fast.
Animated zooms are smooth.
Painting with various brushes, including bristle and mixer brushes, seems just about as quick as with earlier driver versions.
No change to the prior slow performance of the Smudge Tool with larger brushes. That may be a Photoshop issue.
Accelerated color-management (Normal and Advanced GPU modes) appears to work the same as before. No change to the inaccuracy issue with documents in the ProPhoto RGB profile.
New Problems Discovered
I now see a minor new transparency glitch, as reported by others in the thread below, where I did not see this problem with Catalyst 12.2: http://forums.adobe.com/message/4530588#4530588
Questionable Things With Workarounds (Geek Stuff):
The driver insists on putting a couple of things in front of the system PATH on installation that are absolutely not needed, and worse, can cause problems on a development system (e.g., with Visual Studio). These can be removed without downside I can see.
The installer sets a registry value that causes the recording of a whole bunch of extraneous events in the System Event Log. This can be undone by setting this value:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Atierecord]
"eRecordEnable"=dword:00000000
Recommendations:
Keep in mind I only updated to this version of the driver earlier today, so I haven't got a lot of experience with it yet. Early indications are that it's not bad, but if you're already on Catalyst 12.2 and you have a stable system, I see no reason to upgrade.
The new version does not appear to be faster, and there is the one new issue where there's a slight transparency glitch in 16 bits/channel documents showing on the screen after a canvas rotation.
I'll update this thread if I find more things to report. Given the new transparency issue and the fact that I had no problems with 12.2, I'll probably test with 12.6 for a few days then drop back to 12.2.
-NoelYou're very welcome, folks. Thanks for taking the time to send your thoughts, and for your contributions here as well.
I've logged one full day of hard use including Photoshop and many other tasks, and I've seen zero glitches (outside the one I mentioned above, which is pretty minor) with the Catalyst 12.6 release.
-Noel -
Hi, Folks.
I tried to install the new ATI Catalyst 4.4 today.....ran into major problems. My keyboard wouldn't work, when I clicked on icons, it would open up the icon I clicked on as well as open up the last window I was previously working on but had since closed. I uninstalled 4.4 and reinstalled 4.3, everything is working fine.
Just wanted to give people a heads up and see if anyone else had similar problems. Not sure if it is a problem with the MSI mobo or the new catalyst suite. I have a ATI 9500 Pro with a modified bios to allow overclocking (it's the only way I can get the card to run stable with this board). I've never had problems with the Catalyst drivers in the past.I got no problems here with Catalyst 4.4, and I have noticed that the gamma problem with OpenGL is fixed at least with games like ET and RTCW.
-
Can I download the ATI Catalyst driver or something for my new iMac?
I've got Windows Vista 32 bit and I would like to have the Catalyst control center stuff so I can control the graphics.
Where can I get this stuff? Can I just download the latest Radeon 4800 series catalyst/driver/software from ATI?
thanksI need to rephrase my question:
This is the software I need: ATI Catalyst Control Center http://ati.amd.com/products/catalystcontrolcenter/index.html
It's not the display driver I need, but the control center for an ATI product. I need more specific control, which the Catalyst Control Center would give me.
Apple's cd only has the display driver and not this control center.
I downloaded the full suite here: http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista32/common-vista32
When this installs no control center shows up. Any idea, anyone? -
AutoUpdate/Ati Catalyst Broken!
AutoUpdate/Ati Catalyst Broken!? When using AutoUpdate here are some things I had to do to get it working:
) installed standard Creative drivers for my X-FI Titanium 2.7.007
it worked
2)? installed ATI Catalyst 9.0
it stopped working.
3) by mistake I let Windows Update install its WHQL Creative driver
AutoUpdate started working
used the other shortcut for AutoUpdateA.exe to get updates for Creative products in windows 7 64, and it worked everytime to reinstall the Creative 2.7.007
4) three weeks later I installed Catalyst 9.2 drivers, and immediately after reboot, AutoUpdate is broken.
Windows 7 Action Center reports errors with Creative AutoUpdate.
If I delete Creative drivers using CTZAPP, Windows Update upon reboot will install its own update to Creative's drivers......... I reinstall Creative 2.7.007 and Creative AutoUpdate still works.
5) installed ATI Catalyst and it is broken again. The Catalyst installation breaks it everytime. Reinstalling Windows Update version of Creative drivers, uninstalling those and installing Creative's several times usually fixes AutoUpdate. Within a few days, Autoupdate will be broken.
Anybody else have the issue with Catalyst 9.0 to 9.2 and Creative AutoUpdate?
Keep in mind, this is not my "new cause" of the week. I just did a clean format a week or so ago, and I am trying to duplicate the problems others are having with AutoUpdate. About 40-45% of users have ATI cards I would guess and I am trying to figure out if this is a common thing with about half of the Creative users. We install Creative drivers and go along for a few weeks, as many people always say, and then something goes wrong.......A new Catalyst is released about once a month or every six weeks.#Re: AutoUpdate/Ati Catalyst Broken!B <div class="lia">"" try and just uninstall the CCC (Catalyst Control Center) and not the actual video drivers. Its the CCC (the little red "ATI" box in your task manager on the lower right) that is causing this problem. You will still have accelerated video with the drivers installed but not the special ATI utility to configure them. Use the built-in Windows 7 advanced graphics utility when you right click on the desktop (right-click and choose "Screen Resolution"). Inside that window is a link called "Advanced settings" which will let you do the same functions as the CCC does without the CCC's interference.
I hope this hel
ps.
Well this is not a good solution as you will loose advanced settings for your graphic card. -
ATI Catalyst 9.2 and "Incompatible display adapter has been disabled."
Hi,
I have this issue... on 3 GPUs. Only one is working. 2 x 3870x2 in crossfire / Vista x64 SP1
I tried everything possible : uninstall all ATI software before, clean registry, delete files, temporary files, many uninstall and reboots, trying different settings in BIOS . Same issue.
This time I choose to install 9.2 drivers only (without Control Center), but the result is the same.
The problem appears since v8.11, but I was able to install at the end by cleaning / reinstalling many times.
v8.12, v9.1, v9.2 are impossible to install correctly on my system. I'm very disapointed.
I've been waiting about 6 month for 8.10 to have stable drivers...
Maybe installing ATI drivers should be proposed to Olympic Games category...
I asked to ATI if they have a tool to clean all previous drivers, and they suggested this link :
https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=1447
Look at the utility cat-uninstaller.exe date : 10/08/2003 !!!
It's possible that the problem comes from old drivers, but I refuse to format / reinstall the system each time ATI release a new driver. I did that for 8.12 and I had the same issue.
For users who have this problem : OPEN A TICKET TO ATI CUSTOMER CARE !!!
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=31625
That's the olny way to solve this issue.
My system below :
AMD Phenom 9950 BE / Sunbeam Core-Contact Freezer / ASUS M3A32-MVP DELUXE-WIFI-AP (AMD 790FX/SB600 - BIOS v1406) / OCZ Reaper HPC Edition 8Go ( 4*2Go ) PC8500 1066MHz Cas 5-5-5-18 / Quad CrossfireX : dual MSI R3870X2-T2D1G-OC - ATI Catalyst 8.11 / RAID0 : 2x Samsung - Spinpoint F1 - 320 Go 7200 rpm SATA II 16 Mo cache / PSU : Thermaltake - TOUGHPOWER 1200W / VISTA x64 SP1I did tests on my second system :
System 2 :
AMD Athlon X2 6400+ / ASUS M3A79-T Deluxe (AMD 790FX/SB750) / 8GB DDR2 800MHz Corsair Doninator / RAID0 2x Samsung 200 Go SATA II
CrossfireX : 2x MSI RX3870-T2D512E-OC (v120 + v803) / ATI Catalyst 9.1 / Cooler Master Real Power M620 (620W/efficiency >80%) / VISTA x64 SP1
On this system :
Catalyst 9.1 working and Crysis Warhead too
Catalyst 9.2 installation is OK, but :
- Crysis Warhead hang at 85% when a level is loaded
- Crysis v1.2.1 load correctly, but hang after 1 minute
- I noticed that when I lanch CPU-Z 0.3.2 I have on "Bus Interface"
-card 1 : PCI-E x16 2.0@ x16 2.0
-card 2 : PCI-E x16 2.0@ x16 (in catalyst 8.10, both are @2.0)
Uninstall 9.2 and visual c++ x64, reboot, install 9.1 => 2 x GPU disabled error 43 !!!
Going back to 8.10 : it's the last working stable revision from MSI.
For users who use MSI Live update, and drivers from MSI : what are the last ATI Catalyst revision drivers furbished by MSI ?
I would like to have feedback (vista x64, crossfirex).
Thanks -
MSI RX9600-T128 + ATi Catalyst 6.2 = INF Error
I would like to know tech information about MSI RX9600-T128 (chip, memory etc).
Where can i find comparation with ATi 9500, 9600SE, 9600Pro based video cards?
I've got a problem instaling ATi Catalyst 6.2 with RX9600-T128 running WindowsXP.
Also I would like to download WinXP x64 drivers for this video card.
Thanks to all for your future post...Quote from: Richard on 19-February-06, 22:42:36
Livesms,
You asked for the specs on the different Vid Card, I justed their Core and Memory speeds, if you want something different, please specify.
I'm interested is there a big differnese in 3d games and such other things beatween MSI RX9600-T128 (obility Radeon 9600 (FireGL T2-128), 325MHz) and this cards
ATI Radeon 9250 128mb
ATI Radeon 9500 128mb
ATI Radeon 9550 128mb
GeForce FX 5200 128mb
GeForce FX 5500 128mb
GeForce4 Ti4200 64Mb
GeForce 6200A 128Mb Eagle
In % or other objective values:)
Quote from: Richard on 19-February-06, 22:42:36
As for the mobility chip, unless you are using a notebook computer, do not bother.
I'm using desktop with this video card. But it is built on Mobility chip.
Quote from: Richard on 19-February-06, 22:42:36
If you told us what you wanted to do, I am sure we could find you a better Vid Card.
Was it my mistake to by this video card. In store i saw label "MSI ATi Radeon 9600" and i decided to by it...
Or it is better to return it to store and take some other from list i metioned?
Quote from: Richard on 19-February-06, 22:42:36
Now for your problem, download Driver Cleaner to remove your old Vid Card Drivers before installing your new Drivers. I would also scan your comp for Viruses, Spyware, and other Malware too.
Drivers for WinXP i've found - Omega Driver Pack - it works without errors (till now)
Now i'm looking for WinXP x64 drivers.
I'm using NOD32 with up-to-date bases:) is it enough? -
Hey,
Is there any new ATI 64bit beta drivers for windows 64bit out ?
I downloaded the ones that ATI have posted on thier site, but they didnt work with my x800xt card :( The drivers they got posted is from like mars/april I tried them anyhow but as soon as i got them installed the pc just rebooted at once (w/o me pressing yes or windows shutting down prop, just pure rebooted) When win xp 64bit booted up again it still said there was no drivers for my x800xt card.
So my qustion is, does anyone know know if there are some newer ati drivers for win xp 64bit ? maybe omega have remade them or something ?
ThanxNot that I'm aware of.
http://www.ati.com/support/infobase/4424.html
Quote
ATI will release fully supported CATALYST drivers publicly when Microsoft releases the final production level Operating System. -
Broken MSI 3870 OC by some new driver [Catalyst 9.10] [Solved]
Hi all, Well the videocard was fried, I did a look at it and I don't know what is broken but it just doesnt work anymore.
I finished buying a new videocard.Quote from: belhot92 on 02-November-09, 07:01:10
I've bought this videocard like an year ago and till the moment it was working ok.
One year later when I went to install the Ati catalyst drivers 9.10 as all the drivers you download for the vga must be from the ati website (because they have the most updated drivers to day and bla bla bla..) I found out the other day, after shutting the computer down that I had no post screen and no boot screen
When I put the computer on I just received 11 beeps and no boot..
I installed a normal Pci video card and the computer started up with no problems.
I still can't believe it got broken by some catalyst drivers..
I think that that can be RMA'd as a driver broke my card.
The driver wasn't even beta..
It was a new driver like when most of the new drivers come out.
This is simply a coincidence. Whether you updated the driver or not - your card was going to die.
I think your PSU would run a 5770. I'm not sure of the exact figures, however. -
AMD/ATI Catalyst 7.12 Released
7.12 Release Notes wrote:
New Features
This release of the ATI Catalyst™ Linux driver introduces support for the following new operating systems:
* Red Flag DT 6.0 Support
* OpenSUSE 10.3 support
Resolved Issues
The following section provide a brief description of resolved issues with the latest version of the ATI Catalyst™ Linux software suite. These include:
* A memory leak is no longer noticed when running OpenGL applications
* Running X -configure no longer results in a segmentation fault in the fglrx driver
* fglrxinfo no longer reports OpenGL Render string: as Mesa GLX Indirect on systems containing an ATI Rialto AGP series of product
Known Issues
The following section provides a brief description of known issues associated with the latest version of ATI Catalyst™ Linux software suite. These issues include:
* There is no support for video playback on the second head in dual head mode. Further details can be found in topic number 737-26985
* Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-29578
* A black screen may be observed on some hardware when switching to the console or leaving the X window system when a Vesa framebuffer console driver is used. Further details can be found in topic number 737-30687
* Corruption may be noticed in the lower right corner of the display after the system is running for a long period of time
* Display flicker may be noticed when the gnome screen-saver starts
* Diagonal tearing may be noticed when playing a video file using a video player that utilizes the XVideo extension
* Video playback may look blocky when playing a video file using a video player that utilizes the XVideo extension
* Video Playback may display wrong colors and additional shadow images when cropping or expanding a video file using a video player that utilizes the XVideo extension
* Connecting a display device that supports 1680x1050 to a system running Linux may result in a maximum display resolution of 1280x1024 only being available
* Custom mode lines in xorg.conf may be ignored by the fglrx driver
* Building RPM packages for Mandriva may fail
Of other note, apparently the libGL soname issue that we devs have noticed with the catalyst-utils package should be fixed.
I'm building packages now - once you get them, feel free to post your experiences.
Last edited by Cerebral (2007-12-21 00:41:17)robbel wrote:
thayer wrote:Oy... interestingly enough, after upgrading and restarting X I've lost my native resolution of 1680*1050. xrandr --query reports the new max as 1280*1024. Reverting both catalyst and catalyst-utils restores the proper resolution. For the record, I have an ATI Radeon Mobility X1400.
Hey,
I have exactly the same problem (Radeon 9700 Mobility here). My native resolution is 1400x1050 and it used to work just fine but the newest driver maxes out at 1280x1024 (as reported by xrandr).
Shame ATI can't write drivers.
Thanks for posting the old packages.
Best,
Philipp
Me too. Normally I use 1440x900 resolution, but after updating, my resolution is totally wrong. Thanks for the packages!
Last edited by LinuxPatsku (2007-12-21 10:00:16) -
Will new Ati Driver be released?
Hello together,
will there ever be new ati driver be released for the T500 (I’m running xp on it). The 8.5 one is nearly 9 months old and catalyst 9.3 which has recently been released should bring series performance improvements with it.
A few years ago I remember that my 9200 had to be updated through unofficial “omega” drivers but this seems to be ages ago so I’m my Information is a little outdated. Might there be a similar way to update the 3650 “unofficially”?
Kind Regards,
TealThe special ATI switchable graphics driver is for Vista only. For XP just install the modified ATI driver with BIOS set to discrete graphics mode. Download the latest HD3650 driver (for stationary computers) from the AMD/ATI website and modify it with the Mobility Modder from here .
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500. -
ATI Catalyst™ Software Suite Version 7.9
Caution: Installing the Catalyst software suite 7.8 or 7.9 on a system containing the ATI Radeon™ X1950 AGP series of product may result in either the desktop failing to be drawn properly or the operating system failing to boot. It is recommended to continue using Catalyst 7.7 for this product at this time.
Performance Improvements
The following performance improvements are noticed with Catalyst™ 7.9:
* Far Cry performance improves up to 14 % on the ATI Radeon™ HD2900XT CrossFire™, ATI Radeon™ HD2600XT single card, and ATI Radeon™ HD2400XT CrossFire™ configurations
* Call of Duty 2 performance improves as much as 12% with Anti-Aliasing enabled on the ATI Radeon™ HD2600XT CrossFire™ and single card configurations
* Half-Life 2: Episode 1 performance improves at most 9% on ATI Radeon™ HD2600XT CrossFire™ and as much as 6% on the ATI Radeon™ HD2400XT CrossFire™ configurations.
* Serious Sam 2 performance improves up to 46% on the ATI Radeon™ HD2400XT CrossFire™ and up to 27% on the ATI Radeon™ HD2600XT single card and CrossFire™ configurations with Anti-Aliasing enabled.
* Quake 4 performance with Anti-Aliasing improves 9% or more on the ATI Radeon™ X1600/X1650Pro and ATI Radeon™ X1300/X1550 products in both single and CrossFire™ configurations
New Features
Catalyst 7.9 introduces the following new features:
* Avivo Video Converter for Windows Vista (64-bit)
* Catalyst Control Center: Color Temperature Control
Avivo Video Converter for Windows Vista (64-bit)
This release of Catalyst™ introduces the Avivo Video Converter for the Windows Vista (64 bit) operating system. The Avivo Video Converter is a transcoder tool that provides a quick and easy way of converting videos from one format to another. The Avivo Video Converter found within the Catalyst™ Control Center, allows the user to select the input file, and output format, along with the quality level and file location. The Avivo. Video Converter accepts a wide variety of file formats as a source, and outputs to file formats such as MPEG-1, MPEG-2, MPEG-4/DivX, WMA, H.264/AVC and more.
Catalyst Control Center: Color Temperature Control
This release of Catalyst™ introduces Color Temperature Control within the Catalyst Control Center, allowing users to adjust the chromatic level shown on their display. Supported on the ATI Radeon™ X1000 Series and Radeon™ HD 2000 Series of products.
Download: http://ati.amd.com/support/driver.html
kind regardsHi Rudinho
If you check graphic cards manufacturers download page you will find instructions that for mobile computing the drivers are provided by notebook manufacturers. Unfortunately graphic drivers can not be updated so often as on desktops.
The reason is simply. With new driver the graphic card will be forced to run on the limit and the result is high temperature. High temperature can be responsible for suddenly shut downs or even for hardware damage. Because of that notebook manufacturers must deal with great care. Can you imagine what will happen if Toshiba offer some driver and result is graphic card damage?
Satellite M30x is pretty old notebook and I do not believe the driver will be updated. The same situation is for my old Satellite P20. -
Zen Kernel and new ati radeon oss driver
Hey together!
A few days ago I get new ati-driver from testing and since then, I can't start the xserver with the zen kernel and ums. I can use the normal kernel 2.6.33 normally.
Here is my Xorg log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux linux-laptop 2.6.33-ZEN #1 ZEN SMP PREEMPT Fri Mar 5 13:29:19 CET 2010 i686
Kernel command line: root=/dev/disk/by-uuid/5394d0b7-4952-4f87-87bc-a4762f73b8c4 ro quiet
Build Date: 18 March 2010 07:32:34PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:12:54 2010
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:5653:144d:e003 ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0xd0000000/134217728, 0xc0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) [KMS] drm report modesetting isn't supported.
(WW) Falling back to old probe method for vesa
(II) RADEON(0): TOTO SAYS 00000000c0100000
(II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X700 (M26) (PCIE)" (ChipID = 0x5653)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x144d SubsystemID: 0x5653
IOBaseAddress: 0x3000
Filename:
BIOS Bootup Message:
M26-P Samsung M26 Firenze ATOMBIOS BR14537/rel9.10.1.0/CL199610
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 358000
(II) RADEON(0): Default Memory Clock: 345000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 500000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 200000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.32.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=7 min=20000 max=50000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68900
HBlank: 128, HOverPlus: 21, HSyncWidth: 32
VBlank: 16, VOverPlus: 4, VSyncWidth: 4
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): TMDS PLL from BIOS: 16500 b0112
(II) RADEON(0): Skipping Component Video
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVDS
DDC reg: 0x1a808
(II) RADEON(0): Port2:
XRANDR name: DVI-0
Connector: DVI-D
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x809f7db]
1: /usr/bin/X (0x8048000+0x54715) [0x809c715]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0x7785e40c]
3: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x83208) [0x772a9208]
4: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3790c) [0x7725d90c]
5: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3988b) [0x7725f88b]
6: /usr/bin/X (InitOutput+0x5c8) [0x80ab048]
7: /usr/bin/X (0x8048000+0x1a550) [0x8062550]
8: /lib/libc.so.6 (__libc_start_main+0xe6) [0x7747db86]
9: /usr/bin/X (0x8048000+0x1a2f1) [0x80622f1]
Segmentation fault at address 0x7734f808
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Can anyone help me? Thanks!When I install an old xf86-video-ati package from 27.02.2010, everything works. So the problem seems to be the new ati-driver.
Maybe you are looking for
-
is there a version of itunes that works with osx 10.5.6 and also allows my to sync my iphone 5?
-
How do you add a folder from your computer to your music library vs. a file.
-
HT1689 How do I download magazines from the ITunes Store? It won't let me download.
When I try to download magazines, it tells me to contact support.
-
hi, I'm currently trying to draw shapes in java for the first time. I've been looking at the tutorials and examples for java.sun but I'm having a few problems. At the moment I have code as follows: public class drawShape{ public void paintComponent(G
-
So I use a Wacom tablet with CS3, and when I open Photoshop, my right and left-click functions are reversed (left-click opens a menu, right-click selects things). This only happens with Adobe programs. How do I solve the problem? EDIT: I'm running