New Attributes of messages in PO

Hello,
How to give error message for Release PO?
Requirement : if i am releasing a PO,system should give message, PO value differs from earlier PO Value.
e.g Suppose my previous PO for the same vendor and material combination is of Rs.1000 and if the second
PO is of Rs.1200, while releasing 1200Rs. PO,system should give message PO value differs from earlier PO Value.
No any relevant message in system.
Please let me know how to create new message for PO & what is the assignment to it.
message should triggered while releasing the PO.
Regards,
Jyoti Thakur

Hi,
You make messages mentioned below as error message at the time of PO creation, so that no query at the time of Release of PO. System will not allow creator to make the PO if price changes.
1) 06 205 Effective price higher than material price (variance > & &)
2) 06 206 Effective price lower than material price (variance > & &)
3) 06 207 Effective price is &1 &2, material price is &3 &4
Path for doing the same in customizing is
Material management - purchasing - environment date - define attributes of system messages
Regards,
Harshal

Similar Messages

Copy new attributes in new releases

Could you please provide detailed steps using WCF_CC or manual process of new attributes in CRM 7.0 EhP1?
I'm working on message in UI Configuration check in WCF_CC which states,
"Context node Attribute does not exist: STRUCT.ZZFIELD in Object type BP_ACCOUNT, Subobject Type ZZI5EEWCONTACT Role Config key <DEFAULT>, Component Usage <DEFAULT>"
Selecting the edit button directed to UI Config Tool where I could see the missing attibute in the custom configuration which saved newly in a customizing request.
Recheck on the UI Configuration for the view resulted with a new error which is,
"Error during check of component BP_EEW view Runtime Repository"
Edit button selection here states "Action not supported".
Please help with procedures to resolve these errors. Thanks.
NOTE: Re: Copy New Attributes in Enhanced components in new releases.
Edited by: crmdevelopers on Jan 24, 2012 11:49 PM

Could you please provide detailed steps using WCF_CC or manual process of new attributes in CRM 7.0 EhP1?
I'm working on message in UI Configuration check in WCF_CC which states,
"Context node Attribute does not exist: STRUCT.ZZFIELD in Object type BP_ACCOUNT, Subobject Type ZZI5EEWCONTACT Role Config key <DEFAULT>, Component Usage <DEFAULT>"
Selecting the edit button directed to UI Config Tool where I could see the missing attibute in the custom configuration which saved newly in a customizing request.
Recheck on the UI Configuration for the view resulted with a new error which is,
"Error during check of component BP_EEW view Runtime Repository"
Edit button selection here states "Action not supported".
Please help with procedures to resolve these errors. Thanks.

An error occured while creating the original attribute for message no26 296

Hi All,
I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
An error occured while creating the original attribute for
Message no. 26 296
Diagnosis
An error occured while creating an original in the Knowledge Provider.
System Response
The original could not be created.
Procedure
Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
Please let me know what configs i am missing ...
Thanks in advance
regrds
pushpa

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

How to add new attribute as descrition to 0Material infoobject?

Hi BI Gurus,
I am trying to add a new attribute to 0MATERIAL. The new attribute called Z_DESC which will be displayed as Material Description.
My problem is how can I get Material long description show on this new added attribute. Since the master data load from different datasource: Attribute, Text, and Hierachy, how can I get text to show on attribute?
I looked up on 0MATERIAL_ATTRIBUTE datasource there is no field NAME or DESCRIPTION but there is long description on 0MATERIAL_TEXT. Should any have idea how to get text show on added new attribute?
Thanks in advacne,
TOMSBS

Hi BW Team
How was the symptom and how the Message no. RSDMD217 show?
If you have encounter the problem as mine: I added new attibutes to I/O 0MATERIAL and then tried to load the data to I/O 0MATERIAL again, it shows error message Message no. RSDMD217 and I cannot be able to see the data on new added attributes.
I checked on PSA and found some records didn't sound right such as on material code column is filled with text so I use T Code RSRV to check the consistency of the I/O. It shows an errors as
Characters are not allowed in characteristic values (characteristic 0MATERIAL).
So I click on Correct Error Tab and try to reload again. It works.

Interface scenarios - new attributes for adapters

Hi,
sinde sp15 we have a new tab interface scenarios in solman
and there are many adapters lile: EDI, XI adapters, etc that
we can use in those scanarios with special attributes
for each of those adapters
if there any chance to add some new attributes in standard
to those tabs ?
thank you,
Regards,
Michal Krawczyk

Hi Michal,
On a related note, I would suggest you to read [this|Interfaces and Interface-Scenarios in Projects; thread, if it's useful for you.
Coming to your specific question, by new attributes do you mean new technologies being listed in the list of values ?
If so, yes you can add them (though there will be a standard warning message from SAP) in the view tables version of the following tables, from SM30.
DIR_IFTECHATTGRP     Solution Dir: Interface technology and Attribute groupe
DIR_IFTECHTOATT     Solution Dir: Assignment of Attributes to Interface techno
DIR_IFTECH_TYPE     Solution Manager: Interface Techno
DIR_IFACE_TECH     Solution Manager: Interface Technology
Trust this helps to answer your question.
Best regards,
Srini
Edited by: Srinivasan Radhakrishnan on Oct 2, 2008 11:03 AM

New attribute in creditcard

Hi,
I put a new attribute in the creditcard and i saw the verification was made by the class CreditCardTools so i extended it too, i implemented a new method to validate this attribute and i need to add a new error message but it is in a resource file, so i have two questions:
- how i can add a new message ?
- how the method CreditCardTools.getStatusCodeMessage take the correct message by an int ?

Hi,
Check whether the infoobject yo have added as Nav attribute is created as 'Attributes only' infoobject. If this is the case it wont be available in transformation. If you have defined correctly then try to re-activate the master and see the P table if you are able to see attribute. Now you go to the transformation and you should see the object in start routine.
Regards,
Raghavendra.

Added new attribute to WBS

Here is my current issue.
I added a "deleted indicator" to the WBS_ELEMT_ATTR on r/3, then created a new infoobject in BW (did not flag it w/master data) and added this new infoobject as a navigational attribute to the WBS_ELEMT infoobject in BW.
Went to the infosource for WBS_ELEMT and added it to the transfer structure and the comm. structure. Activated it. Then reloaded the master data for WBS from r/3. Went to "Maintain Master Data" for WBS_ELEMT and I can see the new field is populated correctly in the new field I added to WBS_ELEMT.
Then I went to the cube 0PS_C04 and marked the new attribute I added to WBS_EMEMT as a navigation attribute and re-activated it and the update rules.
The problem is in the query and when viewing data with list cube or cube contents the field is blank. But its not blank with maintain master data for WBS_ELEMT.
Does anyone have any clues as to my mistake or what I need to do. I'm needing to restrict a query based on 0PS_C04 by this new attribute I added to WBS.
Will reward points as always.
Richard

Hey Richard,
WBS_ELEMT is a navigational attribute in 0PS_C04 and "deleted indicator" is a navigational attribute of WBS_ELEMT. So, "deleted indicator" is a second level navigation attribute for 0PS_C04. This will not show you any data in the query even if you can see the data for this field in WBS_ELEMENT. One more thing is that in the update rules for 0PS_C04, you have mapped only WBS_ELEMENT but not "deleted indicator". Hence, the data is not displayed in the report.
You can handle this in 2 different ways.
1. Add "deleted indicator" to the cube directly and map it all the way down to the data source.
2. Add the "deleted indicator" to the cube and in the update rules, map it as an attribute of WBS_ELEMENT.
Unless it is mapped to the cube from the comm structure in the update rules, you can not see the data in the report. Try one of these and let us know if it works.
Thanks and Regards
Subray Hegde

I'm trying to change my ICloud e-mail to match the one associated with the Apple ID? Can someone tell me how to do this? Seems like the phone won't accept the new one, the message states "you already have acct associated....." (a given!!) I need help !!

I'm trying to change my ICloud e-mail to match the one associated with the Apple ID? Can someone tell me how to do this? Seems like the phone won't accept the new one, the message states "you already have acct associated....." (a given!!) I need help !!

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Create a new group in Messaging

How do you create a new group in messaging, I had to select ios4.33 in the Operating system as ios5 is not available yet

Someone should show you how to perform a search. There's a sample in this forum.
http://forums.sun.com/thread.jspa?threadID=623860

TS3212 when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Not able to use new attribute in set defination

Experts,
I have created one custom variable employeestatus. Did the binding with 'user' object and also added in MPR 'Synchronization: Synchronization account controls users it synchronizes'..
However I am still not able to use the new attribute in Set definition.
Error says access denied.
Please suggest.
Thanks,
Mann

Hi,
You need to add it to one of FilterPermission objects (depending on what you need either Administrator Filter Permission or Non-Administrator Filter Permission).
Go to All Resources, locate Filter Permission, open one of them and add your attribute to the Allowed
Attributes under Permitted Filter Attributes tab.
Regards, P

Add a new attribute.

I would like to add a new attribute to the membership.xml, what can i do to create the new attribute in the directory server and then add it to the form of autoregister?

Can you restore your DAI service by restoring LDAP entries with ums.xml or umsExisting.xml files. One of them should be backed up before modification. If you didn't, then you can restore it from another installation.
Follow the steps:
0) Delete Membership using amadmin -r Membership
1) Restore old file Membership: amadmin -s <file.xml>
2) Delete DAI Service entries
3) use amadmin -s ums.xml or umsExisting.xml to populate entries under DAI branch
4) restart the service (web srv: stop && start; appsrv: asadmin stop-appserv && asadmin start-appserv)
Try to login again and to create a new account.
It should work.

Add a new attribute for user provisioining on SAP R3

Hi,
I want to add a new attribute for user provisioining on SAP R3.
- I have added new attribute in Process form and Resource form
- I think i need to add this attribute in lookup definition of SAP attributes also need to do mapping
but i am not finding lookup definition of SAP attributes .
What will be name of lookup definition of SAP attributes? (In case of AD, we have AtMap.AD).
Can any body please help me?
Thanks

Hi,
You cannot add custom fields and do provision or recon for it.I have opened the SR with Oracle and this facility will be available in 9.1. which is launching after 4 months.You need to request the source code and modify it to get the custom fields.
Thanks

Steps for adding a new attribute

Please let me know if the below steps are correct
=================================================
I have an Infoobject called 0XXXX in BW and want to add another attribute called XXX_TYPE.
This infoobject is used in 2 Info Cubes and a Multiprovider. Also in 3 queries.
In R/3 the info I need is stored in a Table(XYZ). Please let me know if the below steps are correct and all I need
1) Create a generic extractor to pull the data from XYZ table (Like an ABAP program) .. This is the part which I am not clear !!!
2) Modify 0XXXX in BW to add this new navigational attribute
3) Load Master data using process chain
4) Re activate all update rules
5) Change Infoprovider's for the new attribute (How to do that ??)
6) Change query (What changes will I need to make .. Just select this attribute field into the required query)
Please help

Hello,
As you said, either enhance the extract structure by adding this new InfoObject and then write the code in the user-exit.
Or if the SAP table has the Key fields of the InfoObject, then create a generic extractor. Create a view by including the key fields of the InfoObject and the new attribute InfoOBject for which data has to be derived from this. Use this view or the table itself for the extractor.
Create new InfoSOurce for the InfoObject which will only update the new InfoObject. Keep only transfer rules for the Key InfoObjects and the new InfoObject.
GSM.

Hi - a new and confusing message when I try to connect my iphone with itunes on my laptop: "this iphone cannot be used because the Apple Mobile Device Service is not started". Any idea of my way out of this cul-de-sac?? Brian

Hi, I'm getting a new and confusing message when I connect my Ipad/phone to my laptop: "This iphone cannot be used because the Apple Mobile Device Service is not started" ... any idea, anyone, how I get out of this cul-de-sac. Brian

try this http://melchoi.wordpress.com/tag/this-iphone-cannot-be-used-because-the-apple-mo bile-device-service-is-not-started/
Hope it's gonna help

New Attributes of messages in PO

Similar Messages

Maybe you are looking for