New Audio flex cable, loudspeaker mode and heaphone mode swapped?

Hi all,
I live in Australia and bought a 2g iphone a while back now and I sorted treated it a bit rough after a while. Eventually my silent switch stopped working so I bought a new back cover and a new flex cable which has the headphone jack power button, switch etc. My father who is a spray painter painted the iphone back and now I am at the stage of putting it back together. The first flex cable I bought worked however the headphone and loudspeaker mode were swapped. When the headphones were plugged in music and everything came out of the speaker however when no headphones plugged in there was no sound at all. I thought it was a faulty part so I ordered one from a new person. This now does the exact same thing which leads me to believe its the phone however when I plug my original back in it is okay so I dont really know what the ** is going on. Waiting for these parts is long so i am really sick of waiting. Should I get another one or what suggestions do you guys have.
I would just use the original however since I have broken the power button so it is useless.
Please help lol I need my phone.
Cheers

Just to add to this after reading more posts, I have allready done all the obvious solutions, cleaned out the jack, blown it with a compressor etc. I have also checked the model number is the same as the original and it is which is 821-0449-09.
I hope someone can help

Similar Messages

  • Recently purchased an iphone 6 and got it as a defected(a cut on flex cable of sleep and wake button. What should i do in this cas..??

    Company refuses to give warantee as they declare thi defect as external modification..,
    WHat should i do in this case..!!

    Return it to the seller for a refund. Opening the iPhone - whether you did it or
    previous owner opened it - voided the warranty and also made the iPhone
    ineligible for an Out of Warranty reduced price replacement.

  • Dynex Component Audio/Video cable for iPhone doesn't just play music?

    I just purchased Dynex Component Audio/Video cable for iPhone and it plays video, but not music. It only works when I'm using Neflix or the video component of the iPod. How do I get it to just play my music?
    If I run the iPod music and open Netflix the music will play, but that is just a roundabout way of getting it to play audio and is silly. How do I get it to just play audio?

    don't think so but the component rely on normal analog signals using RCA connectors
    you can find tons of 3.5mm minijack connector and 2 rca connectors in the other cables
    they are dirt cheap and you can even make them yourself

  • How to create new audio tracks as stereo by default?

    Is this possible?
    For some reason all my audio tracks by default are mono.
    Would save time if they were stereo.

    Open the New Tracks Window and select the Audio Track. When you open the "Details" disclosure triangle, you will see the Input and Output settings for the new Audio Track. Select Stereo and Logic remembers that settings as a default for any newly created Audio Track from now on.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. scree

    Not sure that I have selected the correct forum.  Hope my questions are clearly stated.
    Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices).   It does not show Mail or Safari menus.  System preferences'  display "gathered" the Samsung and chose its resolution.  I did not find a way to select the Samsung as my display.
    In addition to having old hardware, we have Verizon FIOS providing internet and TV access.  Is there any way to make this work for us?  We would like to stream video (Netflix) and view shows from the Web.  Do we need Apple TV to do this?  Or is it not possible with our old iMac?  My husband thinks that our Airport could be a factor. 
    Thank you

    Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
    There are, actually, many alternatives to choose from than just from a Mac.
    You need to have or invest in a WiFi capable router for all of these examples.
    Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
    If you have a older Mac, like I have noticed many users do, then you have other options.
    If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time,  you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
    These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
    Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
    Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

  • My iphone 4G has problem with the audio jack flex cable.

    Hello,
    My iphone 4G has a problem and its already been out of warranty and i dont know which carrier it was purchased since its 2nd hand when i bought it.
    This audio jack flex cable had a tear and does not function anymore including the volume buttons and the mute switch as well as the headphone jack.  Kindly see link for sample picture of the part i am referring.
    http://www.sulit.com.ph/index.php/view+classifieds/id/4143121/iPhone+4+headset+f lex+cable+original?referralKeywords=iphone+4G+headset+flex
    I was wondering where i can buy that spare part here in Saudi Arabia particularly in Jubail and if also apple has a service center here...
    Thanks and Best Regards,
    Mothball

    There are no legitimate sources for iPhone parts anywhere. Apple does not sell parts.

  • Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or my wireless router but nothing. Just a flashing orange light. Help for a simpleton p

    Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.

    Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
    Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
    But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
    Hmm, ideas anyone?
    SBB

  • How do I connect my 2nd generation Ipod to a Firewire 800 port? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered...

    How do I connect my 2nd generation Ipod to a Firewire 800 port on a new laptop? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered and connected simultaneously. Pls help.

    Try here:
    iOS: Not responding or does not turn on
    If not successful then time for an appointment at the Genius Bar of an Apple store.

  • New flex field in "Gender and Marital Status"

    Hi Experts,
    Please Let me Know whether we would be able to add New Flex Field in "Gender and Marital Status" in Manage Person Page,.
    Thanks&Regards
    Prasanna Kesavan

    It sounds like you are trying to add a new value of "Significant Other" to the Marital Status drop down.  If that is what you are trying to do, the list is controlled through the MAR_STATUS lookup.  That Lookup is extensible so you can add new values if you like.
    To update the Lookup, navigate to Setup and Maintenance and query the Manage Common Lookups task.
    Then query the Lookup Type = MAR_STATUS
    From there you will be able to see all of the values available for different countries.
    If the options are greyed out, then you will not be able to alter them because they are delivered with the product.
    However, you have the option to add new values of your own here.
    If you only want to see the value for particular countries, you can add a value in the "Tag" column with the Country Code where the value should be visible (i.e. if the code is only applicable in the US then you would add "+US" in the tags, if the code is applicable everywhere except the US then you could add the tag "-US").
    Hope that is helpful,
    Karla

  • Lost a 2 hard drives, have 7 k photos on a touch that I need to load on IMAC with a new hard drive, how do I do it.  Just never went from a Touch to iMac.  I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics!

    Lost my hard drive and also an Ipad, but have 7 k photos on a Touch that I need to load on fixed IMAC with a new hard drive, how do I do it. (There were more photos than the 7k, but they were saved on other drives, thank goodness).  7K pohotos on the Touch are no where else, must be saved!  Just never went from a Touch to iMac.  I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics!  New Aperture and IPhoto on IMAC with no other photos loaded on the new hard drive yet.

    I'd ask in the iTouch forum where there are more iTouch users there than here and they should know how to off load the photos.  It might take a 3rd party app. 
    OT

  • Audio playback during preview mode, where does it go and how to get it back

    O.K so after many pain staking hours, spending $300 bucks on a DV to analog converter box (I know, but I just did not want to use my camera) I finally get real time video playback on my NTSC monitor. Now I can't hear any audio. I know I can set video out to canvas playback, but then there is no picture sent to my NTSC monitor. Any suggestion?
    Thanks

    Duh, answered my own question. I moved the audio out cables from the computer to the converter box and presto we have picture and we have sound.

  • I am new to this I Pad Air and was downloading some games and it is still in waiting mode with the circle continually going in circles. I need to delete these and do not see how to do this. also need to know where I go to delete history

    I am new to this I Pad Air and was downloading games and is still showing in waiting mode with the circle continually going Arian. I want to delete but unable to figure ot how. also needing to delete history, need a lot of help

    Hey Carolyn1951,
    Thanks for the question. I understand you have a few apps that only display "Waiting". The following is a past discussion that dealt with a similar issue, the answer may help you as well:
    App updates won't download on my...: Apple Support Communities
    https://discussions.apple.com/thread/4111336
    Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
    Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
    If that doesn't do it, try resetting or restoring the iPhone.
    via whatheck
    Thanks,
    Matt M.

  • HT3659 My Soundtrack pro looses the mic on AJAKona.  It will appear as an input only after clicking on New audio file, then ok, Recording alert appears and then I have my AJA KONA3g back as an input option. loose it again if I change track

    My Soundtrack pro looses the mic on AJAKona.  It will appear as an input only by clicking on New audio file, then ok,  and an Recording alert comes up.  But if I change track I loose the AJA again. How do I fix this?

    Finally found the answer. The recording was done at 48, the audio/MIDI settings were set to 48, but the sampling setting on the export was not, causing everything else to break down. Once all three matched the export worked and the playback audio worked without opening the clip editing screen.

  • The tip of an audio cable broke off and is lodged in the Mac audio port.  Any advice on how to remove?

    The tip of an audio cable broke off and is lodged in the mac lap top audio port.  Any advice on how to remove it?

    https://discussions.apple.com/thread/3554135?start=30&tstart=0
    Best.

  • I have QT Pro 7.6.6 and want to delete all audio (5 tracks) from a selected in-out section of a .mov file. Then, add new audio. How do I do that?

    I have QT Pro 7.6.6 and want to delete all audio (5 tracks) from a selected in-out section of a .mov file. Then, add new audio. How do I do that?

    If I 1) knew TeX well enough to fix it, and 2) could get the guy to answer the phone or email so as to give me the sourcecode or to fix it himself, I wouldn't have bothered figuring out that the thing could be fixed one page at a time by a) getting a copy of acrobat pro, b) figuring out how to turn on all of the extra toolkits, c) finding the edit object button in randomly named toolkit, d) right clicking on the chapter title and selecting the e) ever so obvious "delete clip" menu selection.
    At this point I would absolutely love to never have to touch an adobe product again in my life, but my hand has been dealt and if I'm going to print the manual for a software library that we've spent a cumulative $70,000 for, I have to figure this out and I really don't want to have to hit [Page Down], [Ctrl] + [A], Right click, delete clip for >700 pages.
    I felt certain that once I'd figured out how to shift the pages down using ghostscript so first two lines of each page weren't getting cut off in the printer non-printable region, and finally figured out this that a relatively simple scripting solution would be immediately apparant.  I mean, there are APIs for both applescript and javascript, but I'm mystified by how to get to the edit object feature from within them, much less how to tell that feature to delete clips for everything on a page.

Maybe you are looking for